General :: Getting A USB Modem To Work With Fedora 13?
Feb 22, 2011
I have tried to get several USB modems to work with Fedora without success. Some time ago I was able to get a Maxon BPS6 to work but I no longer have that unit. I have tried a ZTE 636 which is recognised by the system and have run usb_modeswitch to make it be recognised as a modem and not a cdrom. Seems that what ever I do the modem produces an error - unable to connect to modem.getting my modem working on a completely fresh install of Fedora 13
View 2 Replies
ADVERTISEMENT
Feb 23, 2009
My brother installed Fedora 8 on my 2004 Dell Inspiron 1000 laptop with a 56k MDC modem. I cannot figure out how to get the dial modem to work! Modem Device?, Baud Rate?, Flow Control?, Modem Volume?
View 1 Replies
View Related
May 18, 2011
I am new to Linux and using Linux Mint 11 RC after trying Ubuntu, and Fedora. I am not new to computing having owned and written software for Amiga, and owned and built different Windows machines.
I have a E627 Emachine Laptop with an AMD TF-20 processor that runs a Athros Communications AR8132 Fast Ethernet Card rev c0 and the network controller is a Broadcom BGM 4312 802.11 b/g LPPHU rev 01. I have 2 megs of memory and this is the machine that I put the Linux Mint os on.
For days I have been trying to get the wireless to work. I have read everything I could find on the net and know that this machine has a problem with this. I also know that the drivers in Mint don't work even though they are supposed to. I was using Mint 10 which is the stable version and it had the same problem as did Ubuntu which I know is almost the same as Mint and Fedora.
I have decided after many hours that the way to go might be to install one of those thumb drives with a wireless modem built in, but can't find an appropriate Linux one that will work with my setup. Does anyone know if there is such a thing?
View 3 Replies
View Related
Sep 19, 2009
My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
View 3 Replies
View Related
Dec 17, 2009
How do i get a mc760 usb modem to work with usb_modeswitch in fedora 12.I am using virgin modile dsl Is there away to setup with wvdial to?
View 10 Replies
View Related
Mar 25, 2010
I have a ZTE HSUPA USB Modem Model:MF636 which used to work great and then is not longer detected.
I am using Fedora 12 and was having problems with the modem not been properly detected and filed a bug, which turned not to be a problem of NetworkManager, but an issue with udev.
https://bugzilla.gnome.org/show_bug.cgi?id=603433
I followed instructions to edit /lib/udev/rules.d/61-option-modem-modeswitch.rules and then it worked fine.
Now the modem is again not properly detected. Here is a copy of the results from dmesg code...
I have tried restoring the file that I edited. It was back to the stated previusly reported. I also have tried to run an older kernel. Then I updated to the latest kernel available for Fedora 12. Nothing seems to work.
View 4 Replies
View Related
Jun 10, 2010
How to make the modem lights toolbar addon to work? They don't seem to work while online with Gnomes KPPP, and it would be nice to see them working while online.
View 2 Replies
View Related
Aug 19, 2009
i have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies
View Related
Feb 3, 2010
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies
View Related
Dec 29, 2010
I've tried setting usb_modeswitch wvdial etc .. modem has been detected as a modem fff1 but still could not connect to the internet ... I try to use the network connection settings still can not ..so what should I do?
View 2 Replies
View Related
Apr 11, 2010
I use a modem which is not on fedora inbuilt list. I need to give linux a shot. what is my work around.
View 1 Replies
View Related
Mar 15, 2010
I have no luck in configuring zte ac2627 so for, have searched many threads but no luck yet.
Code:
[root@Wazirkutz ~]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
View 9 Replies
View Related
Jul 10, 2011
How to configure micromax mmx 310g usb modem in fedora 13? it comes with default installation files for windows and Mac.....moreover it is detected as a cd-rom when i am inserting it in fedora 13....
View 10 Replies
View Related
Feb 25, 2011
I have installed the 3 packages required for MTS Mblaze 3G Modem to get connected to the internet.
Quote:
1. usb_modeswitch
2. usb_modeswitch-data
3. wvdial
Here is the "/etc/wvdial.conf" file that gets generated when I do the "wvdialconf"
Code:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = yes
[code]...
But now when I open Mozilla or Google Chrome Internet Browsers, I am not able to connect. Moreover, I also tried to ping to [URL] but it is not pinging.Is it related to some Network Manager settings. As when I look at the Network Connection Icon, it shows CROSS i.e. not connected to any network...
View 3 Replies
View Related
Jun 24, 2011
I am running Ubuntu 11.04 on an external USB drive on a Dell D630 laptop.
My issue is I can't get my 3G modem to work. It is a K3770 Huawei modem.
When I plug it in after boot up it is not recognized at all as far as I can tell. (Which is not very far).
When I plug it in before boot up it shows up as a CD rom drive. I have usb-modeswitch is installed. (It was installed by default during the 11.04 installation.)
what to do to get this to work? Remember my Ubuntu is running on an external USB drive so anything that switches USB off even temporarily won't work. (I don't think).
View 5 Replies
View Related
Apr 27, 2010
One of my clients brought a laptop to me with a 64 bit processor and wanted to hook up his zoom 3095 usb dial-up (56k) modem to a his laptop using ubuntu 9.10 AMD 64 bit version. We quickly found out that zoom has only made 32 bit drivers for linux. So...I need to find a usb modem that has drivers that will work with a 64 bit version of ubuntu 9.10.
View 1 Replies
View Related
Aug 30, 2010
I have JVJ 3G modem,one from Singapore. I have try out as [URL]... But it doesn't work. Has anyone try it before?
View 4 Replies
View Related
Mar 14, 2011
I have safaricom 3g modem but it's not work in ubuntu 10.04. how can I fix this. It's work in windows xp.
View 9 Replies
View Related
Mar 26, 2011
I can't using my usb modem on ubuntu 10.10.
I use vodafone usb modem, without detail information of what type or chipset used.Here is what I can collect, when I plugged the usb modem to laptop..
result of dmesg..
---start---
[ 956.873758] usb 1-1.1: new high speed USB device using ehci_hcd and address 5
[ 956.974318] scsi5 : usb-storage 1-1.1:1.0
[ 957.974336] scsi 5:0:0:0: CD-ROM HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
[ 957.975167] scsi 5:0:0:1: Direct-Access HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
code....
how can I troubleshoot the problem, so the usb modem can work properly.
View 1 Replies
View Related
Mar 18, 2010
I have a Compaq Presario 2100 laptop running Ubuntu 8.04LTS. It has a Conexant HSF modem/chipset, for which I bought the Linuxant HSF modem driver- 56K max.It is installed and it "functions",ie: it will connect to my ISP and I can start to browse (Firefox), but it will inevitably disconnect itself. At this point it is always down to "turtle speed of 4800bps".I have consulted with Linuxant Support and they suggested different modem init. strings - mainly different modulations - V34,V90,V92 w/variations. Nothing has made any signif. diff. They won't offer any further help.My question is: Could it be that Ubuntu 8.04 specifically, or Ubuntu of any version, is the source of the problem??
I have Knoppix 5.1.1 Live CD which loads up fine, and I was hoping to try the HSF driver with it, but I need to get Kernel Source pkg. and that will take 2+ hrs. to download by dialup , so haven't tried it yet.
View 2 Replies
View Related
Jun 30, 2010
I had some Problems with analog Modems.We have now new Server Hardware witch don't work with Suse 10.2, now we Upgrade to 11.2, but the Devolo Modem doesnt work with the Drivers vor 10.2, No Problem, this Modems are sold out, i had to search for other Modems.Now I Test an Softmodem with Motorola Chipset, Bad Luck.Then i Think, Try a Hardware Modem From US-Robotics, Expensive but working on Linux: USR802981-OEM But don't working on Suse 11.2.If you had some Other Modem (internal Pci) witch works for DialIn Data Connections please sent me Type and Configs
View 9 Replies
View Related
Jun 9, 2010
How do I get my Bigpond internet (ZTE MF636 BP) USB modem to work with Ubuntu 10.4 LTS ?
View 1 Replies
View Related
Sep 26, 2010
I have mobile broadband which is T-Mobile UK. The modem is a Huawei E160 and on a Ubuntu page, it says that this modem doesn't work at all. That's the only internet source I have so I need to be able to use it. tried to install usb_modeswitch and I'm going to test a different piece of software later. My version of Ubuntu is 10.04.
View 7 Replies
View Related
Feb 2, 2011
I'm using ubuntu 10.04. My Huawei E156G 3g modem doesn't work with ubuntu, It's detect as a storage device not a modem.
View 2 Replies
View Related
Jun 23, 2010
I've been using an old modem from 2007, which my ISP calls Type I. It didn't have wireless connectivity and I used pppoeconf to setup my connection - username and password and set it to connect at boot time and everything was fine till today. I bought a Type II modem from my ISP and had to return the type I modem to them. Since the technician had no knowledge of Ubuntu (or Linux in general), he configured the modem in Windows 7, tested that the connection was working, tested the wireless connection in my netbook running XP and then he left.
Now I can't connect through pppoeconf in Ubuntu (running 9.10). The terminal says eth0 is listed but the 'access concentrator' or something like that isn't responding (no other process was running at that time). I feel very vulnerable while browsing in Windows so I want to get back to Ubuntu ASAP. Oh, and here's the output when I run "dhclient eth0"
Code:
Listening on LPF/eth0/00:16:76:33:d2:70
Sending on LPF/eth0/00:16:76:33:d2:70
Sending on Socket/fallback
DHCPDISCOER on eth0 to 255.255.255.255 port 67 interval 7
DHCPOFFER of 192.168.1.5 from 192.168.1.1
[Code]....
View 9 Replies
View Related
May 27, 2011
I have a compaq mini 110-1000 with integrated 3g modem and natty narwhal. I bought a vodafone data sim card, I've configured the network manager but it doesn't work! All solution I found are possible only with the hp connection manager. but I've removed windows!!
This is what I see with "lsusb"
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 0461:4d6a Primax Electronics, Ltd
Bus 002 Device 004: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 002 Device 003: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 002 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 10f1:1a0f Importek
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
View 3 Replies
View Related
Jan 20, 2011
I'm trying to make a Huawei K3715 HSDPA modem work in Ubuntu 10.04.1. I plug it in, and it loads two mass storage devices (one CDRom containing the Windows software, and one 2GB drive that appears empty), but I don't really know where to go from here.
Note that I replaced the stock network manager with Wicd, as I find it more reliable in picking up wifi connections. I'm not sure if it's suitable for connecting the HSPA modem though.
View 1 Replies
View Related
Jan 20, 2011
I have recently bought a branded Onda MT835UP USB broadband modem. The hardware comes with its own drivers/GUI for linux, however I'd rather use the Debian-provided NetworkManager+modemmanager packages.
A few details:
- I'm using debian unstable,
- latest NetworkManager 0.8.2-3 from experimental
- latest modemmanager 0.4+git$foo from testing
- latest usb_modeswitch[_data] from experimental
[Code]....
View 1 Replies
View Related
Nov 13, 2010
I'm using Ubuntu 10.04 on Acer Aspire 5536. Used efax-gtk debian unstable package v3.2.3 to send a .ps file. Even by running software with root privileges the output is:
Code:
Socket running on port 9900
efax-0.9a: 11:28:27 opened /dev/ttyS1
efax-0.9a: 11:28:27 Error: tcgetattr on fd=7 failed: Input/output error
[code]....
Decided to first get ride of input output error. using sudo wvdialconf /etc/wvdial.conf command:
Code:
Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
If you still have problems, send mail to <wvdial-list@lists.nit.ca>. Using setserial command returned a huge syntax text. Modem is recognized under windows and it is HDA CX11270 Softmodem. How can I get it to work?
View 1 Replies
View Related
May 15, 2011
I am currently running slackware 13.37 in virtualbox on my Dell 1558. I would really like to install it for real to my HDD to get the speed benefit. My only way to connect to the internet is via my internal Dell UMTS modem. Will this work after the install or do I need to take some precautions before the time and download the right apps files now while I have access?
View 3 Replies
View Related
