Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 RepliesHow can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 Replies View RelatedI have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:
Code:
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:
Code:
ssh: connect to host 192.168.1.100 port 22: Connection refused.
I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?
Netstat has always confused me. I ype netstat -pl and get this:
Code:
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 localhost:ipp *:* LISTEN 1476/cupsd
tcp 0 0 localhost:postgresql *:* LISTEN 13816/postgres
tcp 0 0 *:44223 *:* LISTEN 1288/sshd
tcp6 0 0 localhost:ipp [::]:* LISTEN 1476/cupsd
tcp6 0 0 localhost:postgresql [::]:* LISTEN 13816/postgres
tcp6 0 0 [::]:44223 [::]:* LISTEN 1288/sshd
udp 0 0 *:bootpc *:* 1267/dhclient
I assume that *:* means that any foreign host can connect from any port, but then what does [::]:* mean? and localhost:ipp... what port is ipp? Shouldn't ports be numeric?
I cannot use GRsync from Ubuntu Desktop to PCLinuxOS laptop.The 2 computers can ping each other. I have disabled both firewalls. My laptop IP address is 192.168.1.11This is the error on Ubuntu Grsync:
ssh: connect to host 192.168.1.11 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7]
Rsync process exit status: 12
On PCLinuxOS it wont say Ethernet is connected when trying a static address setup.However it does connect to the internet via auto Ethernet setup and a LAN cable. It then says connected. In order to use SSH and GRsync what programs are required? I have these installed on both machines: grsync openssh-client openssh-server
I am facing trouble to scp from server to to my local machine where as the vice-vesra is working fine.
The error is like below.
lost connection
I have a Windows machine on which NX Client has been installed. I wanted to test if I could access my Ubuntu box. The Ubuntu Box has NX Server, Node and Client installed. When I try to log in from the Windows machine using NX Client with my Ubuntu username and password I get an error connection refused.
The following service is running: OpenBSD Secure Shell server sshd How can I resolve the issue?
One of my colleague has created a LINUX machine with VMWare. This machine has a name such as S003AP03 and IP adress. Normally one can connect to the machine by using putty with the machine's name or IP-Address. But to this machine one can't connect it with it's name. Something should wrong.
Where can I make the correction?
Could you provide me steps on how to connect the guest OS (RHEL 4) using Vmware thru host OS( Win 7)
I am using Bridged connection. How to choose the static IP to be added in the Host OS.
I have installed ubuntu 11.04 and I'm now trying to connect to existing SUSE servers on the LAN. My home directory has a shared NFS mounted home on the SUSE servers while my home on the ubuntu machine is local. I can log in using ssh to all the SUSE servers except one. I get:
ssh: connect to host srv3 port 22: Connection refused
If I use the IP address of srv3 directly it works. Also, before I changed the default machine name ("ubuntu") I could log into srv3.
nslookup srv3 works OK.
ping srv3 works OK.
Even if I completely delete the .ssh directory in both my ubuntu home and in my shared home on the SUSE servers I still cannot log in using the srv3 name, only direct IP address works. I'm thinking that the login I did to srv3 before I changed the machine name for the ububtu machine must have goofed up something
you add a rule which allows a virtual machine to connect to ssh on the main fedora host?so connecting from a virtual machine to the main fedora host installation? I think i have to use an iptables command but not really sure
View 3 Replies View RelatedI'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
View 3 Replies View RelatedI'm trying to ssh from my laptop to my desktop (both fedora 14) over a local network. I can ping my desktop and get responses, but if I ssh to it, I receive
ssh: connect to host 192.168.100.xxx port 22: No route to host
I can ssh from the desktop to itself.
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I have become convinced that rsync for CentOS 5 is broken. I'm trying to set up automatic backups between 2 servers in 2 different countries using rsync under CentOS 5.I can get manual backups to work between the 2 servers by doing two things I shouldn't need to do, but automatic backups fail and I see no solution.Here are the problems I am encountering: According to the instructions I've read everywhere, I am to set up two configuration files:
/etc/rsyncd.conf
/etc/rsyncd.secrets
When I run rsync from root, it apparently just totally ignores these two files. No custom greeting, no log, no password used.
Even when I specify --password-file=/etc/rsyncd.secrets in the command line, it still ignores it. I am prompted and I must enter the password manually. Let me back up a moment. After first installing rsync, when I ran any command to access the root server, I get this error:
ssh: connect to host 111.222.33.44 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(463) [sender=2.6.8]
I read everywhere that rsync uses port 873, not port 22 which is used for SSH. Why is rsync on CentOS trying to use port 22?I have SSH switched from port 22 to another port (let's call it 5432 here) and block port 22.So, I have added this to the command line:
--rsh='ssh -p5432'
Then I get a connection ...
... but it prompts me for my password. It doesn't matter that I have my username and password, same one, in /etc/rsyncd.secrets on both servers. It still asks.And it rejects my password!The only way I can get it to connect is by creating an SSH user on the remote server for this.Even then, rsync STILL prompts me for a password, even though:
1. the username and password are specified in the /etc/rsyncd.secrets files on both servers
2. I've added the command line parameter --password-file=/etc/rsyncd.secrets Therefore, it is totally impossible to use an any cron job or other automatic synchronization, under CentOS 5.
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* 111.222.33.44:httpdocs/rsync
rsync -av --verbose --progress --stats --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
Yes, I have made sure that I have the latest rsync. I have run yum update for everything.Yes, I have double checked, triple checked, and quadruple checked my config files.
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 9 Replies View RelatedI have been playing with this for awhile now and I am ready to go postal.
I just want to move some files around and potentially rsync my net book with my desktop as well as learn the software (my primary reason)
Steps Taken.
Set Static IP address to machines on LAN
Turned on Port Forwarding (22)
Added Rule to UFW allow 22/TCP
I'm having problems with ssh and don't know what else to do. I keep getting "ssh: connect to host stop port 22: Connection refused" when i try to stop or start ssh:
[Code]....
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 14 Replies View Relatedhave fedora 10 and am having problems with ssh. For some reason I can't connect via a remote host to my ssh. Local network connections do work just fine. I have been looking for a log of what is going on but have not had luck seeing anything.Things I have tried:
-Modify hosts.allow to allow ssh to all
-generated rsa1 key identity tryed specifying that with the -i option on the guest computer
[code]...
I've been trying to ssh out of my home network to school computers and I keep getting:
ssh: connect to host sage.math.washington.edu port 22: Connection timed out
I've tried this on my machine (running Ubuntu 10.04) and on a windows 7 machine (using putty). I have been successful ssh'ing to this machine using either of the laptops from every other network I've tried, so I'm pretty sure it's something about my home network.
I can't connect to my Suse server by ssh (using putty) cause console shows me this message: connection reset by peer some times, other times It let me type the user but when I going to enter the password It reset the connection. What I did?? Reinstalled the ssh, but everything was same, the problem still appears. So I reinstalled the Operating System, now but when I going to connect to server the problem appears again! What could be the cause of this behavior??
View 3 Replies View RelatedI researched a long while and could not find an answer to these problems, so here I am. I have a debian server running on my home network. I have it running LAMP and it has a live website.
I have samba running and share files with my windows 7 machine, so they do connect.
When i try to use putty it always refuses the connection.SQLyog tells me off too, but it only cays it cannot connect.
I was checking into SSH, since that is how they are both trying to connect, but I can not find adequate info online for my problem.
I have debian lenny running, I was pretty sure it has ssh running, but i couldnt locate 'sshd'
Is SSH on there by a different name or do I need to install the service.
(ps - getting samba running was a nightmare, but i think it was windoze fault, i tried setting up the debian machine exactly how the guides said to do, but it never could connect and denied passwords constantly, then the next day after a few windows reboots had happened, all of the sudden it worked. Don't know what the deal was there. Could that be instrumental? Sorry I am a web dev and not a networker so this stuff is not my forte.)
I have to connect from my linux client laptop to SPARC machine by using roll-over cable and RJ45 interface on the server. On windows I always used Tera Term but don't know how to accomplish this task from linux laptop.
Is there some kind of app like TeraTerm on linux too ?
i can't connect to my server using putty.
I have a virtual dedicated server, running - Linux Red Hat Fidora core 6- Pentium 4, 3ghz
I'm attempting to use Putty to log in SSH, but I'm getting an error.
Saying the sever unexpectedly close network connection.
I don't know if this has anything to do with it. This is a new computer, that hasn't logged in using putty before. Also I'm on a home wireless network. It dosen't seem to be a firewall issue, the error message pops up, when the firewall is disabled.
And I just had Go Daddy do a reboot. Oh, and I think I might have entered my password incorrectly a few times, last night.
I remember the Go Daddy rep, saying that my IP address may be flagged, but that it would unfilter and unlock it self within an hour or so. It's been over 24 hrs.
Before the password issue, i was able to log in.. But i can't now.
Others can log in. So there unable to duplicate the problem.
I'm new to Linux, and SSH.
Any help
I'm trying to install some software...
I am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
when I try to connect via PuTTY from a windows machine I get " PuTTY Fatal error connection timed out. I try to do so via a router redirecting IPadr:86 to local adr:22 on the Linux machine.
I seems not to be a routing issue since the router is setup to redirect apparently correctly.
Well I have stopped iptables and selinux is disabled. The sshd deamon is running. I can logon with ssh locally "ssh webcamATlocal adr".
I installed samba and samba-client (sudo yum install samba samba-client) but I still cannot connect to this Windows machine.I installed samba, started the samba services (although that may only by necessary to connect into Fedora?), and even restarted the computer and I still cannot do this, I have been googling like crazy and only se articles on how to make Fedora a samba server...
View 3 Replies View RelatedI gannot connect to my Linux server using ssh and get Server refused to allocate pty message. Before it was working fine and today the problem appear, i don't know why this problem. Not that i'm new on linux system. my linux version is Linux 2.6.18-8.el5. I only found the same topic in this forum but not find solution, i try ssh with -T but still not working.
View 1 Replies View RelatedAt school can connect to my computer via SMB/Samba and VNC from the Windows Machines, but not by hostname (I still cannot VNC in at home on my desktop computer and have yet to try Samba there because I wanna setup Samba there from the comfort of my laptop and therefore need VNC first). How come I cannot access this machine by it's hostname?
View 4 Replies View Related