Fedora Networking :: 9 - Not Connect On Restart?
Apr 18, 2009
i'm new on board and new for linux.i installed fc 9, and it's look ok. i want to use stutic ip,so i did what i find here:uote:First, NetworkManager and static ip addresses do not get along. If you want to use static ip addresses, turn off the NM services by going to "system->administration->services" and disable the NM services and reboot.Next, goto "system->admin->network", highlight your device and click the "edit" tab and configure the device. Uncheck the "controlled by NM option" and "automatically obtain ip address" BUT then place a check in the "allow users to control" and "activate on boot"Then click the "dns" tab and fill in your dns servers ip addresses.the problem is that is no internet connection after reboot. than i go to system->admin->network,and activate the device and all ok.
View 10 Replies
ADVERTISEMENT
Nov 11, 2009
im just stating in fedora..why does i cant restart/start/stop my /etc/rc.d/init.d/smb ? actually i notice that there are no "smb" or "samba" file exist in my /etc/rc.d/init.d/ or in /etc/init.d/
and there is no smb or samba found in my /sbin/chkconfig but i have my samba installed. Im using fedora 10
View 2 Replies
View Related
Apr 27, 2010
If I want to swap from wired to wireless I have to restart my laptop. If I just flip the wireless switch on at the side it does not seem to recognise that I have wirless capabilities, I have to restart with the switch set to on.
View 5 Replies
View Related
Jun 13, 2010
I have a server box running F12. Whenever networking is lost up-stream, obviously, my box loses it and the networking icon gets the "red" cancellation sign over it.Now, when up-stream connectivity returns, Fedora does not auto-connect. Instead I have to manually go to my office (grrrr), and simply click on the networking icon, click on the unselected radio button next to eth0 (its the only network interface), and I'm good again.To save me future weekend trips to the office.... How can I make sure this happens automatically
View 2 Replies
View Related
Jul 23, 2010
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies
View Related
Apr 17, 2009
I'm running fc10 x64 - latest updates. First I could never get wake on lan to work - spent days working on that one. Now, when I restart after a hibernate my eth0 is not re-enabled or recognized anymore. About to give up on Fedora.
I've tried service network restart.
I've tried unplugging cable and plugging back in.
I've tried init.d/networkmanager restart.
Only reboot works.
I've spent so much time trying to configure Fedore Core 10 for a Dynamips server and it's just not ready on some of the essential things like this hibernate problem and also wake on lan.
View 3 Replies
View Related
Aug 12, 2009
I have been using Fedora since almost 1 week by now, and I'm really impressed by its features but there is one very small problem that I face everyday.At the first place, I had setup a profile settings for Network so all my static IP, Hosts, DNS servers were all configured in that profile.Now I had filled in something in the Primary DNS Server and then I had saved it. The internet works after that but when I reboot, that Primary DNS server gets deleted. I have to type it all the time and then click on save and then start using the internet again.
View 1 Replies
View Related
Sep 10, 2009
I have a problem with samba machine disappearing after I restart smb or the server where samba is running. Lets say I name my samba server ABC and set it up via system-config-samba utils. I follow basic steps and fill out everything according to most guides that are available for fedora. After that everything works great, I can connect to samba server ABC form any machine through smb://ABC (mac) or \ABC (win), however as soon as I restart smb services or my server (subsequently restarting the smb service ...) I no longer can connect to it via samba server name ABC, I can only do smb://SambaServerIP or \SambaServerIP (have to put numerical internal ip to connect)
My smb.conf:
# cat /etc/samba/smb.conf
[global]
[code]....
View 1 Replies
View Related
Aug 12, 2010
I wrote a C++ program that uses serial port in fedora. Since normal user has no permission to read/write to /dev/ttySx, the program doesn't work. if I changed the permissions using chmod in su, it will works for that session. When restarts the permission changed to default again. So what to do a normal user program to access /dev/ttyS0?
View 3 Replies
View Related
Feb 24, 2009
Is it possible, a torrent download from end of incomplete downloaded after halt of restart ?
View 3 Replies
View Related
Jun 23, 2009
If I restart the network service, not all interfaces come back up. Is this expected behaviour or does something need a kick?
Code:
[root@@aspire3500 ~]$ service network restart
Shutting down interface eth0: [ OK ]
Shutting down interface wlan0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
[root@@aspire3500 ~]$
View 3 Replies
View Related
May 1, 2011
I use fedora 14 and when I'm trying to run the network service on my system it gives me the following error -
# service network restart
Shutting down interface eth0: Error: Device 'eth0' (/org/freedesktop/NetworkManager/Devices/0) disconnecting failed: This device is not active [FAILED]
Shutting down loopback interface: Error: Device 'lo' not found. [FAILED]
Bringing up loopback interface: [OK]
Bringing up interface eth0: Error: Connection activation failed: Device not managed by NetworkManager or unavailable [FAILED]
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
RTNETLINK answers: File exists
And whenever I try to activate the device in graphical mode again it shows the above same error.
View 6 Replies
View Related
Jun 13, 2009
My network is windows pppoe. How can I configure it for Fedora 11? Is there any graphical configuration tool available for that? Also, ubuntu 9.04 logs into pppoe network after restarting as I've made some changes in /etc/network/interfaces. Is there any option available for Fedora 11 to automatically log in to pppoe network after restarting?
View 4 Replies
View Related
Jun 19, 2009
I have installed F11 on my Dell Inspiron 1501. I tried to get the Broadcom 4311 wireless card to work by following the instructions for installing the Broadcom driver from this link: [url].
That resulted in the following errors when I gave the command:
Code:
I removed the broadcom-wl package and installed the autoen package from DangerMouse. After rebooting wireless works but I still get the same errors when I give the command:
Code:
I had to disable encryption on the router to connect, but I guess that's a compromise I'll have to make right now. I will work on that some more after I get these error messages straightened out:
Code:
Note that wireless does seem to be working (though without encryption) despite the error messages. And I got these same error messages with the Broadcom driver but I could not get wireless working.
View 1 Replies
View Related
Nov 17, 2010
I'm running Debian Squeeze x64 and have an odd problem with both Empathy and Pidgin. After I launch the program and add my accounts everything works fine. When I shut down either program and restart the accounts will not connect. I have to delete the accounts and re-add them and all is good until the next time. It's not a firewall issue as I've tried it with the firewall turned off.
View 1 Replies
View Related
Feb 20, 2010
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 9 Replies
View Related
Feb 19, 2010
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 14 Replies
View Related
Sep 22, 2010
I have a mac book pro 5,3 with the nvidia gforce 9600m. After getting Ubuntu installed as a dual boot, I wish to use an external monitor while using Ubuntu. (it doesn't have the problem with OS-X) The external monitor is a samsung syncmaster 192 n. when I connect the other monitor and press 'detect display' both go grey creens(the external already is of course). My lapton screen will not recover until restart either. I need this monitor to run a numerical mesh 3d mesh creator that will not fit on my screen alone. Wouldnt be a problem if the creators were software engineers but the program window cannot rescale, and is beyond the resolution capabilities of my 15'' screen alone.
View 1 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
May 16, 2011
I just upgrade my Fedora 14 to Fedora 15 RC1.I found the critical issue for me that Juniper Network connect(SSL VPN) didn't work for me again.I wonder if the network interface name changed impact this, but I am not sure about it as I didn't see any obviously error.I can connect the VPN auth page with my username and password after I switch my Java plugin to Sun JRE( I use google Chrome).As the Java VPN applet started, it appeared for a while and shutdown again. I think the VPN auth has been passed at that time, the problem might about creating the VPN Tunnel.
View 8 Replies
View Related
Jan 23, 2010
I am using Reliance Netconnect Broadband+ (HUAWEI EC 1260) on my Fedora 10 and Fedora 12.
View 1 Replies
View Related
Jan 18, 2010
I just installed Fedora 12. My wireless card in the laptop works, and can "see" available networks. At system startup it pops a window for me to enter a security key, but I can only choose:
None
WEP 40/128
WEP 128 Passphrase
LEAP
Dynamic WEP
My router is set up to use WPA-Personal with AES, and works just fine with various Windows and Mac computers.
I ran yum install NetworkManager and same for wpa-supplicant. Both were updated to most recent version, but I still cannot enter a WPA security key.
View 6 Replies
View Related
Apr 1, 2010
i got little frustrated with vsftps. the transfer rate is very low. im using fedora 12 and use ad-hoc to connect beetwen my two box..
View 6 Replies
View Related
Jun 4, 2011
I able to connect to Internet with WAP encyrption. But after I restart my laptop, it cannot connect again.I also cannot connect to wireless with WEP encryption.I cant even connect to open wireless without password. It is very weird that I able to connect awhile with WAP but others cant.Anyone counter this problem? What is the problem? driver?But I able to detect wireless. And can connect with LAN cable.
View 2 Replies
View Related
May 21, 2011
trying to bond two 3G modems but I cant Im really new in this matther so I really This is the error that appears
ubu@ubu-AOD255E:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface ppp0=ppp0.
[code]....
View 3 Replies
View Related
Oct 2, 2010
It didn't work. I plugged the cable back in, and it didn't auto-connect, and still says no connection is available after doing the CLI command.
View 2 Replies
View Related
Apr 8, 2009
I tryed to config the tcp/ip settings.
I tryed with the following values:
IP: 192.168.48.120
subnetmask: 255.255.255.0
gateway: 192.168.48.2
With the above settings i was able to connect to net same thing i tryed for fedora
But i was not able to connect, it will always shows the subnet mask as 192.168.48.2 ie the gatway value insted of 255.255.255.o
View 1 Replies
View Related
May 20, 2009
I recently have just started using linux and downloaded Fedora 10 and I'm trying to figure out how to fileshare and print share with my windows vista machine.I edited the registry file on my Vista machine HKEY_ LOCAL_ MACHINESystemCurrentControlSetContro lLsaLMCompatibilityLevel and changed the level from 3 to 1.I've also gone through a lot of tutorials on editing the smb.conf file and set my workgroup name, netbios, and changed permissions on my linux machine (a Lenovo netbook) etc but thats about as far as I can get. This may sound like a dumb question but I can't even get samba to connect on my linux machine so how do I do that?
I was wondering if any of you guys can provide a solution as to how to connect or direct me to a good howto for setting up and using Samba seeing how I'm a noob.I've been on Samba.org already and I'm more confused than ever.
View 2 Replies
View Related
Aug 6, 2009
I have Fedora 11 and have successfully set up VNC so that I can connect within the network (direct using vnc client/server setup). I am in the middle of working on a problem and have a fried who is in another city and was trying to set up VNC so that he could connect via http, which I know is possible (that it listens on range 5800 + the display number - mine is 3 in this instance). For the life of me I cannot get the java http viewer to work, here is what I have done so far: My vncservers file:
[Code]...
My router is set up to forward incoming requests on the range 5900-5910 and 5800-5800 to this computer. I have opened ports 5902, 5903, 5802, and 5803 on my linux firewall. So far as I know, this is all that is necessary..well. Whenever I attempt to connect via [URL]:5803 I get a time out error. What could be wrong?
View 5 Replies
View Related
Nov 3, 2009
I installed fresh copy of fedora 11. I can't activate or deactivate ethernet from system>Administration>Network. Why is this............I can connect to internet directly by enabling network icon on right topmost corner. Even doing so dosen't guarantee connection at times. What could be wrong here ? Also my network icon shows it is disconnected whenever I start my computer. Cant fedora 11 just connect to the internet while it boots ?
View 2 Replies
View Related
