Fedora :: Installing F13 X86 On X3950 M2 - Server Hangs Or Reboot
Oct 14, 2010
The server hangs or reboots when I install Fedora 13 x86 (32-bit) from DVD onto a quad core server (64GB of mem, 16 cores). Sometimes it gets as far as starting anaconda before the hang or reboot. I've been trying different combinations of kernel options, such as vesa, pci=msi, irqfixup, max_add=3072M, noapic, nolapic, noirqbalance, maxcpu=2...
But whatever I do, it hangs or it reboots. The 64 bit versions of RHEL5.5 and RHEL 6 Beta2 installs without problems.
View 3 Replies
ADVERTISEMENT
Mar 31, 2010
Having a problem with my system hanging after updating Fedora 12. Here are my system specs:
Gigabyte MA770-UD3 motherboard
AMD Phenom 9950 Quad Core
6 gig Corsair DDR 800
1 x 160 gig SATA (OS)
1 x 500 gig SATA (data)
I have my system configured for dual boot with Windows 7. After installing F12, I can reboot with no problem. However, after I install the kmod-nvidia drivers, my system hangs on reboot. If I press any key on the keyboard, it will start to load, the freeze until I press a key again. I have tried both Fedora 12 x64 and i386 with the same results. Here are the steps that I took to install the kmod-nvidia drivers code...
Does anyone have any suggestions as to what I am doing wrong?
View 9 Replies
View Related
Mar 2, 2011
today i installed nvidia graphic card drivers for fedora13 using yum, after giving reboot command the system hangs during bootin.
View 1 Replies
View Related
Jan 5, 2010
I'm trying to install DekiWiki, which has as a dependency mysql-server. This is what's going on:
Code:
root@servername:~# apt-get install mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
[Code]...
Do you think this package might be corrupted, and if so can I manually specify a different version or a different package? I don't know what else to do; ctrl+c to kill it results in dpkg hangups that yeah, I can purge, but I'd rather not be doing that more than is really necessary.
View 2 Replies
View Related
Mar 25, 2010
I have a CentOS 5.4 box that I am trying to set up as an OpenVPN server. So I modified the firewall by running the following script:
#!/bin/bash
#
# the following rules will flush out any existing chains
[code].....
View 2 Replies
View Related
Jun 10, 2011
reboot after installing fedora15, it gives me the BAD EIP value error
View 4 Replies
View Related
May 31, 2011
I try to install red hat linux and I connect the PC with serial port. I use hyper terminal as terminal. When the machine boot from DVD/CD, there is no text mode (simply graphic) screen come out. Just a strange/rubbish text come out? I also find it is hang when I install in text mode ..below is the hang screen
Code: Linux Plug and Play Support v.0.97 (c) Adam Belay
pnp:PNP ACPI init
pnp:PnP ACPI:found 5 devices
usbcore:registered new driver usbfs
usbcore:registered new driver hub
PCI: Using ACPI for IRQ routing
PCI:If a device doesn't work,try "pci=routeirq".If it helps ,post a report
NetLabel:Initializing
NetLabel:domain hash size=128
NetLabel:protocols = UNLABELED CIPSOv4
NetLabel:unlabeled traffic allowed by default
PCI:Ignore bogus resource 6 [0:0] of 0000:00:02.0
NET:Registered protocol family 2
View 9 Replies
View Related
Jan 18, 2011
Computer hangs and sometimes won't reboot.
When it hangs I have seen this message a few times:
o[4348] EXT3-fs error (device sda1) ext3_get_imode_loc : unable to read inode block_inode = 14720620 block = 58753255
Also when the machine boots up I get a message saying something about IOMMU should be set in BIOS, but I can not find any such setting in BIOS. I do not know if this is related to the hanging.
I thought I had a hard drive problem at first so I tried a different hard drive. Same problem.
The mother board is an ASRock N68C-S.
One other thing, where is the file located that boot up messages are written to?
View 2 Replies
View Related
Sep 4, 2010
My old laptop has a broken screen. I tried using an external flat screen and win-xp would not run this screen. This is how I came to learn about Ubuntu. I loaded Ubuntu 9.4 and the computer worked with the external screen. The only problem was that during the boot process the (kernel text?) the white text on black screen over ran the edges of the external screen. Once the Ubuntu was loaded the window fit the screen perfect. Now my new problem. After a year of perfect use, the battery ran down and the computer shut itself off.
When I put the charger back on and rebooted the laptop, the ubuntu partly opens then hangs up on the kernal (white text on black screen) because of the screen overrun problem I can not read the text. I can boot still boot from the 9.4 CD. Is there anyway I can correct the problem by re-installing 9.4 but not wiping out my person data and files. In other words is there any way to repair the O/s that is defective, without losing my work?
View 2 Replies
View Related
Apr 16, 2011
fedora 14 did an automatic update and on reboot it hangs displaying the "f" before the login menu. The "f" is how I now feel......... I do "fn+f2" as it is booting and it displays the sequence of loading items which report all is "ok" until it gets to "jexec services" and then it hangs. I beleive the "jexec service" is a Sun Java item but I am not sure. I have been using Fedora successfully for a number of months and need to get data from the machine.
View 7 Replies
View Related
Jul 1, 2009
Have openSUSE 11.1 and (AFAIK) KDE 4 on an older notebook; worked OK for weeks, then booting became a problem and the OS seemed to go to sleep between keystrokes: now the cursor stops blinking, the clock stops running, and nothing happens after clicking a radio button until the mouse moves. Am now 25 minutes into a reboot, hung at "Unmounting file systems" but it also hung for a while when changing run levels. Is this related to the stability problems with 11.1 I've read about? Possibly KDE? Where would I adjust a config to use kde 3.5 rather than 4?
View 9 Replies
View Related
Mar 21, 2010
I am using Ubuntu 9.10. Every time I try to reboot my system it hangs. Shutdowns work properly. I've done multiple re-installations. Nothing I've tried fixes the problem. Does anyone have any suggestions?
View 4 Replies
View Related
Mar 31, 2010
I have Dell Studio 540 desktop and Debian Lenny installed on it:
2.6.26-2-amd64 #1 SMP Tue Mar 9 22:29:32 UTC 2010 x86_64 GNU/Linux
The problem is that I can't reboot it. It just hangs after "Will now restart" message.
I've already tried: reboot=b, reboot=a, reboot=h kernel options.
Additional info (I can provide any other information):
lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
[Code]....
View 6 Replies
View Related
Jan 12, 2010
I am running 9.04 Server (standalone). It had been running fine since I installed in last autumn. Upon reboot, fsck of the root filesystem was forced and it hangs at the same point (16.5%) every time. I was able to break out somehow with cntl-alt-del but the boot was to a read-only filesystem. So I couldn't disable the forced fsck. Instead, I tried to fsck there. It started, but hung. I couldn't do e2fsck -v as it needed the device and, although I worked on UNIX systems for decades, I am not familiar with the /dev/mapper stuff.
Looking at other threads, all involving the desktop GUI Ubuntu, I tried some of the suggestions. Went into the BIOS to see what I could disable. I killed the serial port and similar. (Some said that onboard modems interfered with the checks in /dev.) I also tried to boot from my original installation disk. That does work.The suggestion is to choose "Try without any change to your computer". The problem is that is not available on the server installation, apparently only the desktop (GUI). I had install, check CD for defects, test memory, boot from first hard disk, and something like repair or recover a broken disk. I started the last of them, as it seemed to be the only option. It failed because it couldn't get a dhcp address. I could manually configure it (as it is hard addressed anyway), but I didn't want to start screwing up configurations not knowing where it was going, whayt it would ry to do, and risk losing months of hard work.
Without help, I think I will be forced to install the OS on a second drive, use that install to fsck the original filesystem on the original disk, edit the fstab (or whichever has the config) on the original disk to disable fsck, and return to the original boot.I am building this server for a nonprofit and have put in many hours writing mysql/perl apache cgi code for them as a free service and hate to lose it all and set back everything.
View 2 Replies
View Related
Mar 30, 2011
I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.
View 7 Replies
View Related
Dec 9, 2010
I installed Ubuntu in my PC alongside winXP. I downloaded the ISO and mounted it using a virtual image software (PowerISO used in winXP). I installed Ubuntu using wubi in a 20GB partition. During installation it asked me how much space should I give, I gave it 11gb. Everything went fine. I rebooted but now the computer hangs during startup. I went to verbose mode to see what the error is and found out that everything is ok. The last line that apears is "Setting sensors limit [OK]" and then nothing happens. I have tried every option (safe graphic mode/ demo mode etc etc) but the computer hangs.
View 1 Replies
View Related
Oct 30, 2010
Under GNOME, the X server hangs about every hour under regular use. When this happens, I can usually move the mouse pointer, but nothing else. I can't click anything, I can't type anything, etc. I have CTRL-ALT-Backspace configured to restart the X server, and that works if I do it before it hangs: after it hangs, that doesn't do anything. The only thing I can do right now is reboot the entire machine.How can I figure out why it is hanging? Also, can I somehow restart the X server without rebooting the entire machine?
View 2 Replies
View Related
Jun 9, 2010
I have been running Fedora 12 on my HP Proliant DL140 Server for about 6 months now without any issues, yesterday I ran yum update and rebooted afterwards but the server now wont boot
View 14 Replies
View Related
Feb 25, 2011
After a couple of days, some commands related to the disk (df) or files (ls) or killing process (kill -9) doesn't respond. Even I can't reboot or shutdown my server. After an hard reboot, some files are not here anymore or the log files are not filled anymore until I restart.My disk are behind the RAID controller i6 and are configure in RAID 1. The disks are two HP SCSI 72,8GB 10k RPM.Maybe I am totally wrong to check the disk access side, so I am open to other explanation.I can also add that my CPU is running under 1% et my RAM under 10%.
View 14 Replies
View Related
Aug 12, 2009
I recently installed Fedora 11 on my machine, the configuration of which is: Intel Core i7 920 CPU, 3 GB DDR3 SDRAM, nVidia GTX295 Graphics Card. I initially used the default kmod-nvidia driver, but with a yum update, somehow a non-PAE kernel got installed and the kmod-nvidia driver did not get installed with it during the update for some reason. So I uninstalled the PAE kernel and associated kmod drivers, and downloaded the nVidia driver from the nVidia website. It ran just fine for a few days, and then all of a sudden, after a reboot, the X Server crashed and I had to log into the text mode, run
Code: setup and do the default X configuration. Then, I re-installed kmod-nvidia, with no luck. Sorry for being so vague about this, but I finally managed to get the CUDA driver (I need to use CUDA for my project work) to work (downloaded from [URL]). But after one reboot, the same problem resurfaced.
Now, I am in X Windows with a default 800x600 configuration using a generic visa driver, on a 23" monitor I have been rebooting my computer all morning and trying various things to get the driver to work again. I would be happy to furnish any details about the installed packages I have. For now, here is some information.
[Code]....
View 14 Replies
View Related
Mar 8, 2009
I need to know how to configure automate sending sms if server reboot and shutdown? Now i just set sms notification once my server it's UP by create scripts in /etc/rc.d/rc.local while booting then from server sending sms notification. SMS - using gnokii attached mobibe phone. Server - Fedora 10
View 3 Replies
View Related
Feb 16, 2011
last -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies
View Related
Jun 15, 2010
As you may notice, the client computer of which the mkahawa client package is installed is inside virtual box(guest OS) with the user account name pc004 and with the static LAN ip of 192.168.1.4 then the server(host OS) is 192.168.1.2. The program installation says 0% but detail informs successfully installed. Nothing happens after and very confusing
View 1 Replies
View Related
Jun 15, 2011
I'm new to ubuntu I last used it 2 years ago and did not like it one bit but a friend told me about 11.04 so thought id give it a go and I absolutely love it. its far superior to windows 7 imo. now my only problem so far is when installing updates it seems to hang on applying . but im sure there should be some indication of progress.
View 6 Replies
View Related
Jan 16, 2011
I was having the dreaded black screen hang during install but got that figured out. Read [url] for my first problem.
Now that I've finally gotten it past the blank screen, it starts the install but then hangs while checking the PCI cards, I included a photo of where it hangs, and I don't have any PCI cards installed.
Here are the specs on my computer:
Everything is brand new, TOTALLY from scratch build.
Mainboard is a MSI NF980-G65
AMD Phenom II 6 core processor
8GB DDR 3 Ram
1 Samsung Solid state hard drive
2 Samsung 1TB HD
Samsung iHAS424 DVD/CD drive
I'm using the on-board graphics which is Nvidia GeForce 8 series
View 1 Replies
View Related
Mar 14, 2011
would be great if somebody can help me suggest why RHEL6 installation does not start? If its a problem of disk drive,
View 2 Replies
View Related
Feb 10, 2010
Ever since installing a 2nd tuner card Kaffeine has become unstable and now it won't run at all. It hangs a few seconds after starting up. If I run it from the command line I get the following (see below).
I'm runing Mandriva 2008.0 Kde 3.5.7, Kaffeine 0.8.5.
------------------error:
$ kaffeine
0
kaffeine: Found DVB device.
/dev/dvb/adapter0/frontend0 : opened ( Conexant CX22702 DVB-T )
/dev/dvb/0/frontend1 : : No such file or directory
[Code].....
View 1 Replies
View Related
Dec 17, 2009
I got this message after installing CentOS 5.1 in text mode and console:
It occures after the first reboot after installing:
I pushed TAB and get a list with possible commands.
I used "boot" but without success.
View 2 Replies
View Related
Dec 19, 2010
I'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.
I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.
View 9 Replies
View Related
Mar 1, 2010
The wubi installer copied files successfully and asked for reboot. After booting into Xubuntu the flashing logo appeared for a minute. And then the screen looked as if it was trying to show something but could not and flickered and then became dark this continued till half an hour and then I pressed Alt+Ctrl+Del.I tried all the modes but to no avail, only the last mode with command line was working. But it was not helpful for me becoz I dont know most of the commands.When I tried "Verbose Mode" as directed by the WubiGuide - Ubuntu Wiki, CTRL+ALT+F2 did not work when the installer stopped.The computer I use is assembled with Intel pentium 4, VIA chipset and Mercury(Kobian) motherboard.
View 3 Replies
View Related
