Red Hat / Fedora :: Screen Hangs When Installing In Text Mode

May 31, 2011

I try to install red hat linux and I connect the PC with serial port. I use hyper terminal as terminal. When the machine boot from DVD/CD, there is no text mode (simply graphic) screen come out. Just a strange/rubbish text come out? I also find it is hang when I install in text mode ..below is the hang screen

Code: Linux Plug and Play Support v.0.97 (c) Adam Belay
pnp:PNP ACPI init
pnp:PnP ACPI:found 5 devices
usbcore:registered new driver usbfs
usbcore:registered new driver hub
PCI: Using ACPI for IRQ routing
PCI:If a device doesn't work,try "pci=routeirq".If it helps ,post a report
NetLabel:Initializing
NetLabel:domain hash size=128
NetLabel:protocols = UNLABELED CIPSOv4
NetLabel:unlabeled traffic allowed by default
PCI:Ignore bogus resource 6 [0:0] of 0000:00:02.0
NET:Registered protocol family 2

View 9 Replies


ADVERTISEMENT

Ubuntu Installation :: LiveCD Hangs On Text Mode With Some Info

Jan 8, 2011

I just bought a new Toshiba Satellite C650D which has AMD processor. For some rescuing, I wanted to put ubuntu live CD. Ubuntu starts with some screen but then it converts to text mode and just sit there. I have checked md5sum of the iso file I got , before burning it on the CD. After burning the image, I also checked the directory structure on the iso file and the CD. They are fine. Currently I am writing this from XP. How do I use Ubuntu Live CD.

For burning, I used infrarecorder with 'Burn Image' option. I had installed debian and win xp with the same CD , so I can't see the problem with the CD. Anyway, I tried doing this with different CD and the same problem appears.
The CD's are memorex
CD-RW 700 MB 4X multi speed.
And I don't get the ubuntu boot screen at all. Some screen with ubuntu symbol appears and then text mode with some information about the hardware and it hangs there.

View 9 Replies View Related

CentOS 5 :: Installing In The Text Mode?

Sep 10, 2009

trying to install centOS 5 using only the terminal on a virtual box. i can log in using the root, but where is the setup file and how to execute it?

View 1 Replies View Related

CentOS 5 :: 5.1 Bash - After First Reboot After Installing In Text Mode

Dec 17, 2009

I got this message after installing CentOS 5.1 in text mode and console:

It occures after the first reboot after installing:

I pushed TAB and get a list with possible commands.

I used "boot" but without success.

View 2 Replies View Related

Ubuntu :: Ati Graphics - 10.10, OC'ing - Get A 'black-ish' Screen - Get Into Text Mode From Booting Up?

Dec 31, 2010

What happened was, i used sticonfig to attempt to OC my graphics card, it all seemed to work well, then i put some stress on the card and got a 'black-ish' screen. No matter i though i will boot into text mode (How do you do it normally? The only reason i could was because i crashed my system and could choose recovery mode to then choose text based) and change it back to default and it will all be fine, woo... But apparently you need to be in X server for that command to take effect. ****...........

How do i get into text mode from booting up?
How can i fix this?!

I have tried looking in BIOS but there is nothing there. Have i just fried my card? (It was close to max settings - although only on full load for like 1 second) Could booting up normally, and just 'going in blind' work, like opening up terminal with a hotkey and just entering the command from there....

Ubuntu 10.10
PowerColor Radeon HD 5870
Ati catalyst drivers installled

View 2 Replies View Related

Ubuntu Installation :: Blank Screen Installed Using Text Mode But Still Same

Jan 16, 2011

I'm some what new to ubuntu and i would really like to start using it as my main operating system and get rid of windows. The first problem i face here is that I am unable to install Ubuntu using the normal gui mode.As soon as i select the option to install ubuntu the files starts loading and then the screen goes blank.. but the monitor is still live. So i installed ubuntu using the text based installer.. everything went fine, i installed the system and at boot loader i selected my Os but still the old demon comes in "Blank screen". I've tried all the related forums and tried all the options best to my knowledge, but its still the same.. I am not even able to get a command prompt/terminal. I know that this is a problem with my ATI (i can hear the sighs!!!!!) video card. Now I know that Ubuntu is being loaded cause i can hear the welcome sound of Ubuntu(drums sound).

View 2 Replies View Related

Ubuntu Installation :: 10.10 Installer Crashes With Black Screen - Even In Text Mode

Oct 23, 2010

It has been a few days I'm struggling to install Kubuntu 10.10 on my computer. I started with the normal CD, burnt it and boot the computer. Halfway through the graphical installer, I got a black screen and system froze up. I tried several things (including running the installer with nomodest and single options) but didn't help.

Then I downloaded the alternate CD and started to install in the text mode. I could get passed installing the kernel and programs but right after adding a user/password, the text installer crashed with a black screen and system froze!

Now, I already have Windows 7 64 bits on this computer and have done all kinds of memory/hardware tests on it and it works fine. The CPU, GPU and the case is well ventilated so nothing is overheating. I also run heavy loads on Windows (MATLAB, Chess engine tournaments) for hours and hours and never had a crash. So I guess the hardware is fine.

Here are the specs of the system if it can help:

CPU: i7 950 GPU: ATI HD5870 (model Gigabyte GV-R587UD-1GD) RAM: 12 GB DDR-1666 Motherboard: Gigabyte GA-X58A-UD3R (rev. 2.0) Optical drive: Liteon ihbs112 USB Mouse and Keyboard

Windows is installed on a SSD and I have 2x 2.0TB hard disks for data. Kubunto, however was being installed on a separate and dedicated 200GB hard disk. During installation process I format and partition this drive. I didn't disconnect/disable the other drives. In BIOS, all SATA controllers are set to run in AHCI mode.

My primary suspect is the graphics card. However, why it would ever crash even in the text mode? Although it works fine in Windows even with heavy gaming so graphics card is itself stable.

View 5 Replies View Related

Ubuntu Installation :: Fresh Installing 10.10 Hangs With Black Screen

Dec 19, 2010

I'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.

I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.

View 9 Replies View Related

Fedora Installation :: Fc11 Install Hangs After Remounting Root Fs In R/w Mode

Jul 8, 2009

I have a Dell Optiplex 760 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz

running:

I tried to upgrade to FC11 via download and DVD and in both cases the install hangs on bootstrap right after remounting the root filesystem in read/write mode.

Since it hangs in this manner, I have not been able to gather any logs...

View 5 Replies View Related

Fedora Installation :: Runs In Text Mode ?

Mar 4, 2009

It seems I had no say in the matter. The installer automatically did text mode and it starts up in text mode now. I'm very new to Fedora, though I had Ubuntu installed recently but removed it because Fedora seemed a little more interesting to me. I'm on an HP Pavilion dv2807nr laptop if that helps.

View 14 Replies View Related

Fedora Networking :: How To Set Network In Text Mode

Jun 5, 2009

For a certain reason , I have to set network in text mode . My X window need network to start .

I have a router at 192.168.1.1 DNS address: 202.102.134.68 / 202.102.128.68 I want my PC at 192.168.1.2 in LAN.

How to do with it in text mode ?

View 14 Replies View Related

Fedora Installation :: 11 Only Installs From 1st CD In Text Mode?

Aug 27, 2009

I tried installing Fedora 11 on my i386 using the 6 CD set that I downloaded. Since my system has only 128M of RAM, the text install mode was used. The 1st CD installation seemed to work OK. After 181 out of 181 packages were installed, the system rebooted and did not ask for me to insert the other CDs. now when my system comes up, it is always in text mode.

Q. Is there a command I can use to have the remaining CD's installed so I can install the graphics system?

View 7 Replies View Related

Fedora :: Connect To Internet While In Text Mode?

Dec 25, 2010

I need help connecting to the Internet while in text mode p.s don't know why but my wireless card lamp for on doesn't light in text mode, i am using a mobile broad band to connect

View 4 Replies View Related

Fedora :: How To Run Pdf Files On Terminal Through Text-only Mode

Dec 30, 2010

I want to run pdf files on fedora 13 through text-only mode(i mean not gui but when i change it to init 3).At gui i know how to do it by converting pdf to html but if we are not at gui?

View 4 Replies View Related

Fedora Installation :: F15 With NVidia Only In Text Mode?

May 31, 2011

I made a clean installation of F15 on my laptop, is a Qosmio x505, it has an nvidia M360, so I download the nvidia drivers and intall it separatly.To install the nvidia drivers I change the runlevel with the commandln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.targetAnd then, change it again to the graphical mode with the commandln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.targetEverything seems ok, but the system only boot in text mode. I can load the Gnome with the command startx without problems, but how can I made that it loads the Gnome automatically?

View 2 Replies View Related

Red Hat / Fedora :: Open Web Browser In TEXT Mode

Apr 16, 2009

I am new in redhat 5.3. i want to open web browser in TEXT mode .is there any way or command used to open browser. I want also open PDF file in TExt mode ...

View 4 Replies View Related

General :: Install Fedora 11 From Text Mode?

Jun 13, 2010

how to install fedora 11 from text mode . I am in a situation to install in text mode only .there is no such option in fedora 11 . Because i have already installed fedora 9 in text mode.

View 2 Replies View Related

Server :: Change From Graphic Mode To Text Mode In CentOS 5.3?

Sep 14, 2009

The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?

View 1 Replies View Related

Fedora Hardware :: Computer Hangs In 3D Mode With Hot-plug Warning (not GPU Overheating) / Sort It?

Dec 29, 2010

After some time (thirty second - a few minutes) computer hung (screen froze, I couldn't switch to console, only hard reset helped). From log message I suspected graphic card and I replaced it to some other based on PCI Express (GeForce 6200). It's better. Computer works fine during office work (OO, Firefox, ...), but after being a few minutes in 3D mode (e.g. game with graphics 3D) hangs in the same way.

The last messages in log are always code...

View 2 Replies View Related

Fedora Installation :: Install In Text Mode Totally?

May 19, 2009

I wanna install Fedora 10 in text mode and use it in text mode. So i wanna know what kinda packages or software i should exclude when installing to save some time and space.

View 1 Replies View Related

Fedora :: How To Let Emacs Run In Text-mode In Gnome-terminal

Sep 11, 2010

I had Emacs installed in Fedora 11 and want to run it text-mode,but everytime when I type emacs command in gnome terminal,an emacs graphical window pop up. I want to emacs to back to text-mode by typing M-x text-mode, and it doesn't work.Can emacs run in text-mode in X11 environment?

View 2 Replies View Related

General :: Force Fedora 12 To Start To Text Mode?

Jul 13, 2010

I have a problem with my newly installed ATI driver so my Fedora 12 boots to a frozen graphic mode display.I need to force it to boot to text mode interface to start adjusting my X configuration. What to do?This is a new Fedora 12 installation without any change to GRUB etc.

View 2 Replies View Related

Red Hat / Fedora :: Attach A File To A Mail In Text Mode?

Aug 4, 2010

how to attach a file to a mail in text mode

View 1 Replies View Related

Fedora Installation :: Too Many Installed Packages In Text Mode Install?

Jan 23, 2009

On some computers I can not use graphical installation interface of Fedora 9. So I use text mode.I would like to have a very small installation with very few installed packages, so at package selection I uncheck everything. In text mode installation there is no option to customize installed packages down to package names. I can only check main themes.So I uncheck everything and installation starts. This method results over 400 packages to bo installed... This is too much with many unnecessary packages.If I use graphical interface and uncheck every package name at custom package selection then about 150 packages will be installed.Is there any good way to use textmode installation and don't install more than 400 packages?

View 2 Replies View Related

Fedora Installation :: No Custom Layout Of Partitioning In Text Mode?

Dec 27, 2009

Since the kernel of F11 live-cd can't recognize my video card, I have to run it in text mode. I also have to run "liveinst" in text mode and the install progess seemed ok. But on the partitioning selection step, there is no "custom layout" option! I rembered that in the graphic mode there was such option. How can I find it in the text mode?

View 2 Replies View Related

Fedora Installation :: X Startup Failed And Falls To Text Mode?

Mar 25, 2010

I install Fedora10 in my computer but when it begins the process of installation, it says that "x startup failed" and falls to text mode of installation. Howerver, the graphic mode works in another computer.

View 1 Replies View Related

Fedora Installation :: Start Network Connection Under Text Mode?

Jul 2, 2010

when I tried to install Nvidia driver for my computer, and when I reboot it, I found i can not log into the x-window mode as the screen display freeze at the point where suppose to be login screen. so use grub go to text mode, try to reinstall the akmod-nvidia xorg-x11-drv-nvidia-libs.i686, but it failed, sames i don't have internet connection to retrieve it. how can I start my network connection under text mode?

View 13 Replies View Related

Fedora :: Konqueror Default View - Embedded Text Editor Mode

Jan 22, 2010

Everytime I open Konqueror, it opens in "Embedded Text Editor" mode . So if I open it then click on a bookmark, it opens in edit mode. I can select View->View Mode->khtml and then the page displays properly. If I click on a link from that page, it displays properly. If I open a new tab, it is back to edit mode. If I open konqueror from konsole, it has the same behavior. I have removed all files under ~/.kde that mention konqueror, kong_* or kfmclient.

I checked the menu entry for Konqueror, and it is "kfmclient openProfile web browsing". I have set the view mode properly, then manually saved the profile in Konqueror. I have checked the system settings file associations, and the konqueror entry has the same application command (kfmclient) as the kde menu entry. Does anyone know how to make the view mode "stick" for Konqueror such that when clicking on html urls or selecting bookmarks causes Konqueror to display properly?

F12 x86_64, latest updates (4.3.4-1).

View 2 Replies View Related

Installation :: System Crash When Trying To Install Fedora 12 In Text Mode / Solution For It?

Apr 30, 2010

I trying install fedora 12 in text mode, but every time the system crash, i cant install in text mode. Someone have one solution ?

View 1 Replies View Related

Fedora :: Grub Starts In Text Mode After Deleting All ATI And Catalyst Stuff?

Jul 3, 2011

use Fedora 15. I had installed driver for my ATI graphic card, as it was written in Fedora guide, then when I rebooted the system the bars and icons appeared with strange, changed colours (purple, green, etc). I've read that this happened because of the bad drivers, so I tried to fix it. Unfortunatelly because I'm Linux newbie and I'm also very nervous I deleted (using Fedora software manager) everything connectedtalyst from my system.Now when I try to start my computer, grub starts in text mode.My question is:What can I do? Do I have to reinstall my system or maybe someone knows how to fix it?I'm quite scared because now I can't launch not only Fedora but also Windows.(I'm writing from another computer

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved