I have a CentOS 5.4 box that I am trying to set up as an OpenVPN server. So I modified the firewall by running the following script:
#!/bin/bash
#
# the following rules will flush out any existing chains
[code].....
I am booting centos 5.4 on machine. The system hangs at line "Applying iptables firewall rules".Is there any way to skip starting iptables service during boot or disable it during boot so the system finally reboots.
View 1 Replies View RelatedI'm at my wits end at this point.
CentOS 5
iptables 1.4.1.1
APF 9.7
Webmin 1.4.80 (yes i can be a gui noob at times)
I'm currently running a dedicated server that hosts a couple of sites and runs a game server or two. I was using iptables on its own for a while, but recently I'm a target of all sorts of attacks (typically aimed directly at the gameserver on port 7777. UDP flood attacks, etc). I'm also seeing an spike in foreign spam, SSH brutes, and a few people in Turkey thought it would be cute to download files over and over and over I have decided to start banning entire countries, using the subnets listed here [URL]... I'm trying to block Central and South america (189,190,200,201.x.x.x), China, Ukraine, Turkey, Iran, Spain and Italy. I do this because a majority of the traffic from those areas are usually up to no good.
I installed APF so I could easily add these ranges in deny_hosts.rules and be done with it. I added the ranges, which turned out to be too many, and the system tanked. I decreased the amount of ranges to just 4:
189.0.0.0/8
190.0.0.0/8
200.0.0.0/8
201.0.0.0/8
Restarted APF and it loaded fine. Do an apf --list and iptables --list and it shows those 4 ranges as blocked. The only issue...I have people from 190.x and 200.x connecting to the gameserver and PLAYING. Its as if the firewall isnt there. Also, adding those ranges to /etc/hosts.deny (or whatever) doesn't block them either.
I add one of my own ips and I get blocked instantly. WTF?? I look in the iptables for webmin, and it shows an empty firewall. I do iptables --list and it shows the ranges I added in APF. I'm looking at building (or whatever its called) an fresh iptables with the geoip module added in. [URL]...
I've never done anything like this, and I don't want to kill the box. I also don't want to spend the effort if 1) something is wrong with my system to begin with and 2) the geoip module doesn't work. geoip module aside....how exactly should i configure the firewall? Empty iptables completely and then rely on APF for everything? Oh and heres another tidbit: I tried this before 2 years ago and it used to be that anything I put in APF would show when i looked at iptables using the webmin module. Thats no longer the case now. That was also on CentOS 4 when it did that. I don't know if moving to 5 is whats preventing it now.
In a nutshell, I'm new at this and I'm being inundated with terrible people trying to do terrible things and I'm ready to just give up. Can someone just give me a quick rundown on:
1) how to test that my firewall is actually firewalling
2) how I should configure the/a firewall on this CentOS5. Not too specific, I just want to know if I should empty iptables then load apf, should i not bother with APF (i like it when it works), is there a specific order of doing things?
I'm trying to configure a messaging system based on php script with iptables, rsyslog and mysql. In the firewall server Sendmail is istalled so i'd like to use it to receive messages in the main mail server, located in DMZ. In the Lan i've configured another linux server than works perfectly, sending mail messages to the server located in DMZ. After looking for some solution I've tried to configure sendmail to relay mail to the server but the only thing I reached is the following message: "Deferred: Connection refused by mail.server.com" message rest on queue and flushing it reply
[Code]...
I have setup sshd_config for port 3210! I have difficult setup the iptables firewall to allow ssh on port 3210! i always enter this:
iptables -A INPUT -p tcp --dport 3210 -j ACCEPT
iptables -A OUTPUT -p tcp --sport 3210 -j ACCEPT
but after i restart ssh, the system do not allow port 3210... why? do i forget something?
I have a strange problem with IpTables.after a server reboot, the complete rule-list of iptables is empty. After a manually start, all my old rules are there again.I checked chkconfig if autostart of iptables is enabled:chkconfig --list iptablesiptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off
View 2 Replies View RelatedI have vsFTPd running on my server. If I connect via 127.0.0.1, then all is well and I can use the "ls" command to get a directory listing. However when trying this remotely, the FTP client hangs and I do not get a directory listing.
View 4 Replies View RelatedI am facing a strange problem witht my iptables as there are some firewall entries stored somewhere which is displaying the below firewall entries even after flushing the iptables & when I restart the iptables service then the firewall entries are again shown in my iptables as shown below,
[root@myhome ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
IPtables creates an error during startup as well as when I try to restart it: Here's the output of:
[Code]....
Can we use iptables as firewall instead of Juniper firewall
View 2 Replies View RelatedI joined a company as an IT staff 2 months plus back. I now encounters a problem that the booting up hangs at the time when it is starting domino services. I have no clue where to look at and duno where to start checking. A little description of the server. : It's a lotus notes domino server for employees webmail service. -> Now it is down. it's an external dns server: recently high volumes of query cache denied surfaces. it's also our proxy server. The only way to get it up and running is to turn off domino service. The system is running still with high volumes of queries I last checked.
Althrough it can boot up now and DNS & proxy are running, I couldn't access the system anymore. It will hang when I attempt to log in from the command prompt. Below is an illustration:
iasaix login: root -> I attempt to log in using root user
password: xxxxxxxx -> I keyed in my password
-> The cursor comes down and just keeps blinking and nothing happens.
Remote access is not possible as it has sshd disabled by default. Our employees cannot access their webmail now, which is a major issue.
The server hangs or reboots when I install Fedora 13 x86 (32-bit) from DVD onto a quad core server (64GB of mem, 16 cores). Sometimes it gets as far as starting anaconda before the hang or reboot. I've been trying different combinations of kernel options, such as vesa, pci=msi, irqfixup, max_add=3072M, noapic, nolapic, noirqbalance, maxcpu=2...
But whatever I do, it hangs or it reboots. The 64 bit versions of RHEL5.5 and RHEL 6 Beta2 installs without problems.
I am booting centos 5.3 on x86-64 machine. The system hands at line "Starting xend:". Is there any way to skip starting xend service during boot or disable it during boot so the system finally reboots.
View 3 Replies View RelatedIf I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View Relatedi am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
when I reboot the server with centos 5.5 the SMB deamon doesn't start?
View 2 Replies View RelatedI'm using CentOS 5.3, and I want to allow my samba server from selinux. I disabled my selinux and it works fine, but I want to keep my seline firewall on and want to allow other workstation to access my samba server.
View 8 Replies View RelatedMy host is blocking port 3960 which I need to use for an SVN server, they are telling me that I will have to install my own firewall. I've not done this before and am not sure of what to do or whether anything I can install will be enough protection.
View 2 Replies View RelatedI've started facing the weirdest problem. I have to restart the ethernet interface a couple of times a day and everytime i do that the server locks up completely and i have to hard reboot it.info: recently shifted to a new server, all new components and new installation, OS version CentOS 5.6
View 1 Replies View RelatedDoes the rc.firewall script just use iptables or is that something completely different?
View 3 Replies View RelatedI have installed centos 5.3 and it the X Server is failing.
I have managed to get to cli and update all packages.
I have an ATI Radeon x1600 and Dell 19" Wide Screen 1440 x 900 monitor.
My linux skills are ok but could be better.
I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedI am having a little trouble setting up a NAT firewall using iptables. I have 1 PC dedicated to being the firewall running Ubuntu 10.04 LTS. There are 2 NICs in this PC. One NIC is connected to the modem & the other is hooked into my router, sharing the connection through to the other PC on my LAN. Thing is that I am having troubles setting this up using iptables. I have it sharing the connection, but can't seem to make it forward 2 ports through to my webserver on the LAN. I am also wanting to setup init.d to control iptables. I have been trying to google this, but haven't found anything useful to get this accomplished. I put the following into rc.local to make the forwarding work:
/sbin/iptables -F
/sbin/iptables -N block
/sbin/iptables -A block -m state --state ESTABLISHED,RELATED -j ACCEPT
/sbin/iptables -A block -m state --state NEW -i ! eth0 -j ACCEPT
/sbin/iptables -A block -j LOG
/sbin/iptables -A block -j DROP
/sbin/iptables -A INPUT -j block
/sbin/iptables --table nat -A POSTROUTING -o eth0 -j MASQUERADE
I have to make my final exam on network & security, my task is to compare Iptables and a firewall program, yeah not a distribution. I use Archlinux so I'd like to continue use it for my project! Anyway my question is: which Network firewall could be the best one? I need this features:
- packet filtering
- HA (High Availability)
- Live (active) connection migration (if one fails...)
- Load balancing (not really important but...)
I know "many" firewalls but they all are distro. I need something to install on a linux machine (as said... better if I can run it directly on Archlinux!)
Recently I have been working on iptables and trying to understand how to use it. Here's a little script I have written to setup a basic firewall for myself:
Code:
#!/bin/bash
if [ `id -u` -ne 0 ]; then
echo "You need root privilege"
exit 1
fi
PROG=/sbin/iptables
$PROG -F
function sethttp {
echo "Opening http port..."
$PROG -A INPUT -p tcp --dport 80 -j ACCEPT
}
function sethttps {
echo "Opening https port..."
$PROG -A INPUT -p tcp --dport 443 -j ACCEPT
}
function settorrent {
echo "Opening torrent port..."
$PROG -A INPUT -p tcp --dport 52413 -j ACCEPT
}
while getopts "hst" option; do
case "$option" in
h) sethttp;;
s) sethttps;;
t) settorrent;;
*) echo "DOH!"
esac
done
$PROG -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$PROG -A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
$PROG -A INPUT -i lo -j ACCEPT
$PROG -A OUTPUT -o lo -j ACCEPT
$PROG -A INPUT -j DROP
$PROG -A FORWARD -j REJECT
echo "Done setting up the firewall! Enjoy :)"
exit 0
OK, this can take 3 arguments that open ports 80, 443 and 52413. And at the end, some default rules are applied. But here's the thing I don't understand:
if I don't give the argument for port 80, I can still view web pages... and also, when I remove the line:
Code:
$PROG -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
Whether I say it to open port 80 or not, I can't view any web pages.
I am encountering problems to configure my firewall (through iptables) to allow apt-get features, like update and install.I have the latest debian server running in a virtual machine in my windows xp and therefore I have two interfaces in this debian server:- NAT Interfaceinet: 10.0.2.15- Host Only Interfaceinet: 192.168.56.101So far my iptable rules drop all packets for default, in exception icmp and ssh that I allow to ping and connect from my windows xp. Both of them I use only the Host interface (192...) to connect to another 192... interface on my windows.
Those are working fine, but apt is not. I know, in this very moment it shouldn't. But I made a lot of attempts trying to configure the iptables allow connections through the 80 and 21 ports from/to NAT and Host. I think I made all possible combination (or not, because it didnt work). But I'm wondering if someone more experient can help me solve this problem.
I just install 1 firewall using Iptables.
Firewall includes 2 NIC:
NIC1 <IP PUBLIC>
NIC2 192.168.10.1
I installed 1 web server IP: 192.168.10.2
I have some PC IP range: 192.168.10.10->20
I set rules NAT on firewall and PC & web server can connect internet good, but I have problems:
When PC access to web server with IP 192.168.10.2 that ok, but PC can't access to web server when using IP Public. But outside internet, I can access to web server using IP Public.
Rules on IPTables
Code:
# Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*nat
:PREROUTING ACCEPT [950:126970]
:POSTROUTING ACCEPT [89:5880]
:OUTPUT ACCEPT [19:1342]
-A PREROUTING -d 209.99.242.124 -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.10.2:80
-A POSTROUTING -s 192.168.10.0/24 -o eth0 -j SNAT --to-source 209.99.242.124
*filter
:INPUT DROP [1599:157409]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [232:34452]
-A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i eth1 -o eth0 -j ACCEPT
-A FORWARD -i eth0 -o eth1 -d 192.168.10.2 -p tcp --dport 80 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o eth1 -j ACCEPT
COMMIT
I had been using Guarddog for iptables but I updated to KDE4 and guarddog does not work with KDE4, neither does Firestarter. Is there a Graphical interface for iptables available that works with KDE4?
View 2 Replies View RelatedI recently had a problem with Proftpd, when execute proftpd return the next error:
# /sbin/service proftpd start
Starting proftpd: [FAILED]
the file configuration is:
I have a service I've made an init script for, and it's added to chkconfig, which shows it "on" in all the correct runlevels. When I start or stop this service using the "service" command all is fine, but it does not start on it's own at bootup. I am currently at a loss to determine why it is not starting. Here is the script:
#!/bin/bash
# chkconfig: 2345 95 10
# description: Start or stop home automation
#
[Code]....