As you may notice, the client computer of which the mkahawa client package is installed is inside virtual box(guest OS) with the user account name pc004 and with the static LAN ip of 192.168.1.4 then the server(host OS) is 192.168.1.2. The program installation says 0% but detail informs successfully installed. Nothing happens after and very confusing
View 1 Repliesi am trying to set mkahawa to count my print-outs but the problem is i dont understand how i will configure using make,make install as given in their website:[UL]
View 1 Replies View RelatedI have vsFTPd running on my server. If I connect via 127.0.0.1, then all is well and I can use the "ls" command to get a directory listing. However when trying this remotely, the FTP client hangs and I do not get a directory listing.
View 4 Replies View Relatedi am trying to install mkahawa cyber management package!! but the client part is giving me alot of problems.
View 3 Replies View Relatedi have been trying to change the default mkahawa blocking image without success because simply i cannot find the lockpix.gif directory they are talking about!! i also tried changing that through the server but the results still proved futile.
View 1 Replies View Relatednfs client hangs system for 3 to 5 minutes during boot, Does any one have any clues?
The last message before the hang is 'Starting NFS client services: sm-notify idmapd'.
My fstab looks like this:/dev/system/swap swap swap defaults 0 0
/dev/system2/swap swap swap defaults 0 0
/dev/system2/root / ext4 acl,user_xattr 1 1
[Code]....
We're seeing NFS hangs with a Fedora 13 client to a Thecus N7700 NAS unit. /etc/fstab entry for the mount is pure default. Sometimes, the hang ups freeze the Fedora client and it has to be power-cycled to reboot it.
View 4 Replies View RelatedAfter connecting to any host, the openssh client hangs after I type the password. The strange part is, it only hangs if when I use the wlan card. If I connect my phone to the computer and uses it to connect to my server, it works 100%.
If I use any other computer at the wireless network, it works 100%
If I use putty on the same machine, it works 100%
It is only a problem when I use the build-in wireless card, under openSuSE 11.3, on my Lenovo L512. (note that everything besides ssh works completely).
When accessing an NFS mount for a large (200MB+) file transfer, the transfer starts rapidly, then becomes slower and slower until it hangs. On several occasions, it has frozen the client machine. Both client and server are set to default to nfs version 3. Slowdown and hang also occur when connecting to FreeBSD NFS mounts.
Presumably (I hope), there is some sort of configuration for the client that needs to be set. what should be changed in the configuration? This worked out of the box in OpenSUSE 11.0.
I'm trying to install DekiWiki, which has as a dependency mysql-server. This is what's going on:
Code:
root@servername:~# apt-get install mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
[Code]...
Do you think this package might be corrupted, and if so can I manually specify a different version or a different package? I don't know what else to do; ctrl+c to kill it results in dpkg hangups that yeah, I can purge, but I'd rather not be doing that more than is really necessary.
I'm new to ubuntu I last used it 2 years ago and did not like it one bit but a friend told me about 11.04 so thought id give it a go and I absolutely love it. its far superior to windows 7 imo. now my only problem so far is when installing updates it seems to hang on applying . but im sure there should be some indication of progress.
View 6 Replies View RelatedI was having the dreaded black screen hang during install but got that figured out. Read [url] for my first problem.
Now that I've finally gotten it past the blank screen, it starts the install but then hangs while checking the PCI cards, I included a photo of where it hangs, and I don't have any PCI cards installed.
Here are the specs on my computer:
Everything is brand new, TOTALLY from scratch build.
Mainboard is a MSI NF980-G65
AMD Phenom II 6 core processor
8GB DDR 3 Ram
1 Samsung Solid state hard drive
2 Samsung 1TB HD
Samsung iHAS424 DVD/CD drive
I'm using the on-board graphics which is Nvidia GeForce 8 series
I'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.
I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.
I get a wrong architecture error when I try to install the .deb .A fully 32 bit enabled install of Ubuntu 10.10 86-64 on a D525 Atom based system does not seem to work at all. It will not install with gdebi or the new Ubuntu software centre.I have the 32 bit required OpenMotif libs installed...and all the other stuff that is i386 arch works perfect. I really want to run the 64 bit os but perhaps I can dual boot it with Fedora 32. There is nothing in the asus bios of the board that says emulate i386 like with AMD 64 chips...I thought that the D525 atom was fine as it will run 32 bit XP or any 32 bit linux.
So what might be the trouble with running 32 bit software on Ubuntu 10.10 64 on this machine? Why does the Ubuntu hacked gdebi software install system insist that i386 software is the wrong arch for this intel atom?This is really maddening as my wife's work demands this citrix client, and the last thing that I want to do is run out and buy an oem of Windows 7.been there done that with 98, XP, and Vista I am looking to ditch her noisy POS vacuum cleaner vista machine..but I cannot do it until I have the linux citrix client installed and working.
I'm trying to install the Cisco VPN client on Ubuntu 11.04, kernel version 2.6.38-8 generic-pae. I need a step by step process since I am an absolute beginner with Ubuntu and this is my first install on the operating system. I have already tried the network manager but connection always fails. I have also tried the website [URL] but this always fails, seems this was made for earlier versions of Ubuntu and earlier kernel versions.
View 9 Replies View RelatedI try to install red hat linux and I connect the PC with serial port. I use hyper terminal as terminal. When the machine boot from DVD/CD, there is no text mode (simply graphic) screen come out. Just a strange/rubbish text come out? I also find it is hang when I install in text mode ..below is the hang screen
Code: Linux Plug and Play Support v.0.97 (c) Adam Belay
pnp:PNP ACPI init
pnp:PnP ACPI:found 5 devices
usbcore:registered new driver usbfs
usbcore:registered new driver hub
PCI: Using ACPI for IRQ routing
PCI:If a device doesn't work,try "pci=routeirq".If it helps ,post a report
NetLabel:Initializing
NetLabel:domain hash size=128
NetLabel:protocols = UNLABELED CIPSOv4
NetLabel:unlabeled traffic allowed by default
PCI:Ignore bogus resource 6 [0:0] of 0000:00:02.0
NET:Registered protocol family 2
The server hangs or reboots when I install Fedora 13 x86 (32-bit) from DVD onto a quad core server (64GB of mem, 16 cores). Sometimes it gets as far as starting anaconda before the hang or reboot. I've been trying different combinations of kernel options, such as vesa, pci=msi, irqfixup, max_add=3072M, noapic, nolapic, noirqbalance, maxcpu=2...
But whatever I do, it hangs or it reboots. The 64 bit versions of RHEL5.5 and RHEL 6 Beta2 installs without problems.
would be great if somebody can help me suggest why RHEL6 installation does not start? If its a problem of disk drive,
View 2 Replies View RelatedEver since installing a 2nd tuner card Kaffeine has become unstable and now it won't run at all. It hangs a few seconds after starting up. If I run it from the command line I get the following (see below).
I'm runing Mandriva 2008.0 Kde 3.5.7, Kaffeine 0.8.5.
------------------error:
$ kaffeine
0
kaffeine: Found DVB device.
/dev/dvb/adapter0/frontend0 : opened ( Conexant CX22702 DVB-T )
/dev/dvb/0/frontend1 : : No such file or directory
[Code].....
When trying to install Novell client (novell-client-2.0-sp2-sle11-i586.iso) on my 11.2 box, I get the following error: "Problem: nothing provides libbfd-2.19.so needed by novell-xtier-base-3.1.6-12.i586". The libbfd library is provided by binutils. I have binutils-2.19.51-10.26.4.i586 installed, and it provides /usr/lib/libbfd-2.19.51.20090527-10.26.4.so. I made symlinks (/lib/libbfd-2.19.so and /usr/lib/libbfd-2.19.so
View 9 Replies View RelatedI have setup pxeboot server on centos 5. I want to install suse11 on client machine by this pxeboot server. How will I do this ?
View 3 Replies View Relatedhow you install Oracle Instant Client on Kubuntu.I have Oracle XE and Lazarus installed on a KB machine, but Lazarus can't connect because it's missing the file "libociei.so".I found that file in the Oracle Instant Client which I downloaded and unzipped from Oracle.com. However, I have no idea how to install it. Normally you issue a "sudo" command of some sort. I can't just copy the files because I don't have privileges to copy to the system folders, and don't know where to copy them to anyway. The only online help I've found is for installing PHP with it, which I'm not interested in.
View 1 Replies View RelatedI have recently started using Ubuntu, i need help in installing the sify broad band client on my machine.
1) Where can i get the software for installing the client?
2) How do i install the client once i have installed the software?
I am trying to install a torrent client (I don't know which is best for Linux Mint).
I've tried Bit Torrent and Ktorrent.
When I download these files they come like something that reads: ktorrent-4.0.3.tar.bz2
I open the folder and it contains a bunch of files that I have no idea what to do with.
I've been a Windows user all of my life, so I'm basically used to just being able to install software within a few clicks.
I guess what I want to know here is how I am supposed to install ANY software on Linux.
I have Linux Mint (If that makes a difference).
I have CentOS 5 installed on VPS server running VZ with ostemplatecentos-5-i386-afull.
Some details of system:
[root@vps ~]# cat /etc/redhat-release
CentOS release 5 (Final)
[root@vps ~]# uname -a
Linux vps.abix.info.pl 2.6.18-92.1.13.el5.028stab059.6PAE #1 SMP Fri Nov 14 20:46:53 MSK 2008 i686 i686 i386 GNU/Linux
[Code]...
Having a problem with my system hanging after updating Fedora 12. Here are my system specs:
Gigabyte MA770-UD3 motherboard
AMD Phenom 9950 Quad Core
6 gig Corsair DDR 800
1 x 160 gig SATA (OS)
1 x 500 gig SATA (data)
I have my system configured for dual boot with Windows 7. After installing F12, I can reboot with no problem. However, after I install the kmod-nvidia drivers, my system hangs on reboot. If I press any key on the keyboard, it will start to load, the freeze until I press a key again. I have tried both Fedora 12 x64 and i386 with the same results. Here are the steps that I took to install the kmod-nvidia drivers code...
Does anyone have any suggestions as to what I am doing wrong?
I am trying to install Ubuntu 10.10 x64 on a HP Pavilion p6565uk.
My PC is x64 compatible, although ubuntu will not install.
I don't get to any gui, it says ubuntu will continue install in 5 seconds, at 0, nothing happens. The CPU light is flashing, but nothing happens.
After about 10 minutes, it reboots, but when the HP splash screen shows (Before the boot selection screen) it just hangs. I have to do a hard shutdown to boot back up.
I am using wubi for install.
I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies View Relatedtrying to create a "local network" by directly connecting an IBM Thinkpad with Debian Linux installed on it to an Alix computer running Voyager Linux. I'm following a "how to" I found to create a music server, hence the requirement. My issue is I can't get a static IP address to be configured on the Debian machine.I've trawled the net and have found the instructions about editing the /etc/network/interfaces and have tried to do this. First I tried to get DHCP working so I could connect the Debian machine to the net and this proved successful. I edited the interfaces file to look as follows:
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
Then I tried adding a static IP address to the machine. As this is a network purely between two machines I made up the IP addres and used 192.168.0.1 and used a NetMask calculator to give me a NetMask of 255.255.255.254 (I told the calculator there would be 2 machines on the network). I then edited the interfaces file as follows:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
I re-booted the machine (ifdown eth0 followed by ifup eth0 keeps saying that eth0 hasn't been configured - a problem there that I don't understand), but during boot up time it failed to assign the Static IP address to eth0 and made me go into SU mode. To fix it I simply replaced the interface file with the static IP inputs with the file that had the DHCP entries (I'd made a copy of the DHCP file), and re-started the machine. Everthing came up fine. So the first question is how do I get a static IP address to be assigned to eth0 such that whenever I shut down and restart the machine the static IP address is always loaded?
The second question is around creating the network via the cross over cable. From what I've found via Google, all I should have to do is create a static IP address on the Debian machine and a static IP address on the Voyager machine. Once they're connected by the cross over cable they should see each other. Is that correct, or do I have to do anything else?
I am writing a TCP server in C, and the server listens to incoming client connections and accepts them. It then creates a thread to handle the client. The clients are expected to only receive data from my server and not send any data. So if I use a select() call with a recv(), I believe that the recv() will just block forever since there will not be any data coming from the client. If I use a non-blocking recv(), then this will just return a 0 which tells me nothing because the client is not expected to send any data. I am not sure if I have misunderstood some socket concepts, but I need a solution to detect when the client has disconnected so that I can close the socket and stop sending data to the client. As I understand it, simple ACKs etc are not captured by the recv(), and only data sent by the client will cause recv() to return a non-zero value, so I am not sure how to know when the client has disconnected.
View 7 Replies View Related