Debian :: Computer Hangs And Sometimes Won't Reboot?
Jan 18, 2011
Computer hangs and sometimes won't reboot.
When it hangs I have seen this message a few times:
o[4348] EXT3-fs error (device sda1) ext3_get_imode_loc : unable to read inode block_inode = 14720620 block = 58753255
Also when the machine boots up I get a message saying something about IOMMU should be set in BIOS, but I can not find any such setting in BIOS. I do not know if this is related to the hanging.
I thought I had a hard drive problem at first so I tried a different hard drive. Same problem.
The mother board is an ASRock N68C-S.
One other thing, where is the file located that boot up messages are written to?
View 2 Replies
ADVERTISEMENT
Dec 9, 2010
I installed Ubuntu in my PC alongside winXP. I downloaded the ISO and mounted it using a virtual image software (PowerISO used in winXP). I installed Ubuntu using wubi in a 20GB partition. During installation it asked me how much space should I give, I gave it 11gb. Everything went fine. I rebooted but now the computer hangs during startup. I went to verbose mode to see what the error is and found out that everything is ok. The last line that apears is "Setting sensors limit [OK]" and then nothing happens. I have tried every option (safe graphic mode/ demo mode etc etc) but the computer hangs.
View 1 Replies
View Related
Mar 31, 2010
I have Dell Studio 540 desktop and Debian Lenny installed on it:
2.6.26-2-amd64 #1 SMP Tue Mar 9 22:29:32 UTC 2010 x86_64 GNU/Linux
The problem is that I can't reboot it. It just hangs after "Will now restart" message.
I've already tried: reboot=b, reboot=a, reboot=h kernel options.
Additional info (I can provide any other information):
lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
[Code]....
View 6 Replies
View Related
Aug 6, 2011
At boot time, my computer hangs for 15 seconds before continuing. This is the message that I receive:Starting the hotplug events dispatcher: udevderror binding udev control socket 1...(warning).Waiting 15 seconds and trying to continue anyway...(warning).
View 1 Replies
View Related
Aug 4, 2010
I insert the domain name "g3c" in menu: System->Administration->Network (file attach)
When i reboot the computer this information lost: why ?
Where i must insert this information ?
My s.o. is debian 5.05
View 2 Replies
View Related
Jul 30, 2015
I've an Blade 1500, sparc64 IIIi with 2 hard disks and 2go of RAM. The computer run with debian 7.7.0 and BSD (opensxce) for each hard disks.
1/ When it's run under BSD there are no problems, the uptime are on many hours.
2/ when it's run under debian with XFCE x-window, the uptime is 4 hours 30 minutes and computer reboot automatically !
Into the control panel i've deactivate the hibernation, screensaver and power management ! I want to find the files for manage the time down. I think that the problem is in XFCE window manager.
View 0 Replies
View Related
Apr 4, 2016
I have spend way too much time on this and it still fails. I installed the debian 8.3.0 AMD64 CD1 iso image on an empty external USB 1TB Western digital My passport Ultra. I use the graphical install method and the installation process of Debian appears to go fine, except it informs me at one point I am missing some nonfree firmware for something with wifi, but that shouldn't relate to this.
*FYI I put GRUB on the external hdd, sdb in this case.
*windows 7 is on the internal hard drive and I excluded it from the boot sequence
* using laptop lenovo t410
I reboot my computer and it hangs with a flashing - in the upper right corner. Never even gets to GRUB. For awhile I thought I might have partitioned something wrong, but I am now convinced that isn't likely. I tried countless number of different partition configs. Separate /boot partition and I also tried using guided partitioning.
I mounted the partitions of the external hard drive using another OS and GRUB appears to be there. So it is there.
I know some Western digital hard drives have added priopertary firmware crap, so I tried installing on a external Seagate drive and it still hangs. I tried installing linux mint on the Western Digital drive and it works fine!
BIOS settings fine. USB settings fine. I tried booting via the boot menu and moving the USB HDD to the top of the list.
I also tried installing with Debian Live on a USB, but that actually has more problems for some reason. I can never get passed the partitioning phase because it fails to create /boot or /swap partitions saying something about how they are still in use and another thing about how the partition table hasn't been updated in the kernal yet.
It seems I might be having this same issue, not sure: [URL] ...
View 7 Replies
View Related
Sep 10, 2015
I'm using Debian Stretch with Gnome and Cinnamon. My desktop computer sports an nvidia geforce 970 gpu (this may be relevant, and it is the reason I had to go with stretch.) I'm not a very experienced linux user but I get along fine.
I'm sharing my computer with my mom and whenever we have to switch users, the computer seems to shut down for 35 seconds: the screen doesn't receive signal anymore. After a new user is chosen, it takes another 35 seconds to get to her session. This is embarassing because my os runs on an ssd and everything else is nice and fast. At first I thought it may be a matter of us two not using the same window manager or not using the "default" window manager, but changing window managers didn't work.
Today I learned about the existence of /var/log/syslog and I decided to check what happened to it when I switched users. I can't post the whole log of what happens because it is too big, but I put it on pastebin : [URL] ....
I understand almost nothing of what is written here, but I saw some interesting things:
- after 35 seconds intervals where nothing is logged, there is a stall on cpu detected (lines 68, 500)
- my gpu seems to have something to do in all this
View 7 Replies
View Related
Sep 4, 2010
My old laptop has a broken screen. I tried using an external flat screen and win-xp would not run this screen. This is how I came to learn about Ubuntu. I loaded Ubuntu 9.4 and the computer worked with the external screen. The only problem was that during the boot process the (kernel text?) the white text on black screen over ran the edges of the external screen. Once the Ubuntu was loaded the window fit the screen perfect. Now my new problem. After a year of perfect use, the battery ran down and the computer shut itself off.
When I put the charger back on and rebooted the laptop, the ubuntu partly opens then hangs up on the kernal (white text on black screen) because of the screen overrun problem I can not read the text. I can boot still boot from the 9.4 CD. Is there anyway I can correct the problem by re-installing 9.4 but not wiping out my person data and files. In other words is there any way to repair the O/s that is defective, without losing my work?
View 2 Replies
View Related
Apr 16, 2011
fedora 14 did an automatic update and on reboot it hangs displaying the "f" before the login menu. The "f" is how I now feel......... I do "fn+f2" as it is booting and it displays the sequence of loading items which report all is "ok" until it gets to "jexec services" and then it hangs. I beleive the "jexec service" is a Sun Java item but I am not sure. I have been using Fedora successfully for a number of months and need to get data from the machine.
View 7 Replies
View Related
Jul 1, 2009
Have openSUSE 11.1 and (AFAIK) KDE 4 on an older notebook; worked OK for weeks, then booting became a problem and the OS seemed to go to sleep between keystrokes: now the cursor stops blinking, the clock stops running, and nothing happens after clicking a radio button until the mouse moves. Am now 25 minutes into a reboot, hung at "Unmounting file systems" but it also hung for a while when changing run levels. Is this related to the stability problems with 11.1 I've read about? Possibly KDE? Where would I adjust a config to use kde 3.5 rather than 4?
View 9 Replies
View Related
Mar 21, 2010
I am using Ubuntu 9.10. Every time I try to reboot my system it hangs. Shutdowns work properly. I've done multiple re-installations. Nothing I've tried fixes the problem. Does anyone have any suggestions?
View 4 Replies
View Related
Jan 12, 2010
I am running 9.04 Server (standalone). It had been running fine since I installed in last autumn. Upon reboot, fsck of the root filesystem was forced and it hangs at the same point (16.5%) every time. I was able to break out somehow with cntl-alt-del but the boot was to a read-only filesystem. So I couldn't disable the forced fsck. Instead, I tried to fsck there. It started, but hung. I couldn't do e2fsck -v as it needed the device and, although I worked on UNIX systems for decades, I am not familiar with the /dev/mapper stuff.
Looking at other threads, all involving the desktop GUI Ubuntu, I tried some of the suggestions. Went into the BIOS to see what I could disable. I killed the serial port and similar. (Some said that onboard modems interfered with the checks in /dev.) I also tried to boot from my original installation disk. That does work.The suggestion is to choose "Try without any change to your computer". The problem is that is not available on the server installation, apparently only the desktop (GUI). I had install, check CD for defects, test memory, boot from first hard disk, and something like repair or recover a broken disk. I started the last of them, as it seemed to be the only option. It failed because it couldn't get a dhcp address. I could manually configure it (as it is hard addressed anyway), but I didn't want to start screwing up configurations not knowing where it was going, whayt it would ry to do, and risk losing months of hard work.
Without help, I think I will be forced to install the OS on a second drive, use that install to fsck the original filesystem on the original disk, edit the fstab (or whichever has the config) on the original disk to disable fsck, and return to the original boot.I am building this server for a nonprofit and have put in many hours writing mysql/perl apache cgi code for them as a free service and hate to lose it all and set back everything.
View 2 Replies
View Related
Mar 30, 2011
I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.
View 7 Replies
View Related
Oct 14, 2010
The server hangs or reboots when I install Fedora 13 x86 (32-bit) from DVD onto a quad core server (64GB of mem, 16 cores). Sometimes it gets as far as starting anaconda before the hang or reboot. I've been trying different combinations of kernel options, such as vesa, pci=msi, irqfixup, max_add=3072M, noapic, nolapic, noirqbalance, maxcpu=2...
But whatever I do, it hangs or it reboots. The 64 bit versions of RHEL5.5 and RHEL 6 Beta2 installs without problems.
View 3 Replies
View Related
Mar 2, 2011
today i installed nvidia graphic card drivers for fedora13 using yum, after giving reboot command the system hangs during bootin.
View 1 Replies
View Related
Mar 31, 2010
Having a problem with my system hanging after updating Fedora 12. Here are my system specs:
Gigabyte MA770-UD3 motherboard
AMD Phenom 9950 Quad Core
6 gig Corsair DDR 800
1 x 160 gig SATA (OS)
1 x 500 gig SATA (data)
I have my system configured for dual boot with Windows 7. After installing F12, I can reboot with no problem. However, after I install the kmod-nvidia drivers, my system hangs on reboot. If I press any key on the keyboard, it will start to load, the freeze until I press a key again. I have tried both Fedora 12 x64 and i386 with the same results. Here are the steps that I took to install the kmod-nvidia drivers code...
Does anyone have any suggestions as to what I am doing wrong?
View 9 Replies
View Related
Mar 4, 2010
A few times a day my computer suddenly hangs. Often programs are not responding, or having strange behavior. I suspect the memory banks in my computer. This is what i caught on the SSH session from another computer.
Code:
Message from syslogd@debian at Mar 4 09:26:46 ...
kernel:[ 1561.329508] stack segment: 0000 [#1] SMP
[code]....
View 1 Replies
View Related
Sep 13, 2010
See this articleIt says that win 95/98 machines wont work for more than 49.7ys continously. my question is , following the lines of above article , does linux distros (ubuntu in particular) have any such issues ?
View 1 Replies
View Related
Feb 26, 2009
I have used the system recovery CD about 5 times on my computer and it wont do anything. I goes through the process but afterwards I go to reboot it and it just keeps restarting itself over and over again. It NEVER makes ot to the windows screen. What can I do to fix this problem? I don't have the money to go to Best Buy to ghave them fix it because I'm broke.
View 2 Replies
View Related
Jan 1, 2009
I added a new (logical) partition to my primary hard disk. There was no way I could udev make to recognize that partition. Actually I had to reboot the computer as to have the new partition show up in /dev/ hdparm...Rebooting after a partition addition? What did I miss?
View 14 Replies
View Related
May 13, 2011
Dual Boot Win XP Pro with Fedora 14 32 bit All ok til update today which included a new Kernel hence asked to reboot On reboot get to following message with no menu to access either Fedora or Windows
Quote:
GNU GRUB version 0.97 ( 638K lower / 3406528K upper memory ) [Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device /filename.] grub> _ (flashing cursor)
View 4 Replies
View Related
Aug 11, 2009
My Fedora 11 installation was a breeze but i have been experiencing crashes sometimes. the computer hangs and i have to do a hard reset.
Here is what /var/log/messages say before the crash:
View 5 Replies
View Related
Dec 21, 2009
I have managed to install SUSE 11.1 linux on an old ACER laptop. Everything works great unless I use the automatic install update tool. As soon as I do this the computer refuses to boot, it just gets stuck even on safe boot. What is going on ?
View 3 Replies
View Related
Oct 17, 2010
I'm running Maverick on an Acer AO521 netbook. I've got a k125 processor and an ATI Mobility Radeon HD 4200 series video card.Since upgrading to 10.10 with the new version of gnome my computer has started getting stuck on blank screen when booting the GUI. Not every time, but most times i boot.If I boot to command line through GRUB there's no problem. When I try to run gnome from the command line i get the same problem.
View 8 Replies
View Related
Feb 25, 2011
I just installed Xubuntu 10.10. It indicated 202 updates, so I started to update and next thing I notice is that the computer is frozen on probably the screensaver. I reboot the computer by pressing the reset-button (ctl-alt-del doesn't work) and after reboot it flashes the update-tool processing a kernel-update. Then it flashes back to login screen and hangs. Another reboot I only get to login screen and it hangs. When booting into recovery mode, it hangs on
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/init-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done
(blinking cursor)
how to go on and get my system running?
HW: 2GHz, 80 GB disk, 1 GB RAM
View 2 Replies
View Related
May 19, 2010
my computer hangs as soon as i boot into ubuntu 10.04 LTS GNOME. nothing works and i have to press the reset button.i don't face this issue with ubuntu 8.04 LTS. my comp works fine with linux mint 7 GNOME but it hangs when i try install mint 8. i have tried to work with windows xp. things seem to be alright. but not with latest ubuntu and its variations it just HANGS..I am on a mercury 945 series motherboard and i have 2 gb RAM.
View 3 Replies
View Related
Feb 23, 2011
I am having an issue with Ubuntu 10.10 where when I lock my screen or reboot, the Visual Effects are set to None. It does this with either Metacity or Compiz set as the window manager.
I am on a Dell D630 latitude with an nvidia Quadro NVS 135M graphics adapter. I am using the Recommended NVIDIA graphics display driver.
View 2 Replies
View Related
Jun 14, 2011
After trying to deal with a very frustrating problem in Ubuntu 11.04, which caused my Eee Pc 1001PX to freeze any time I connect it to a wireless network. It worked Perfectly using my ZTE WCDMA Mobile broadband modem though. I gave up - and Formatted my netbook, Downgrading it to Ubuntu 10.10. Now the problem is the exact opposite:
The Wireless works perfectly, But the Modem Is causing the trouble.
Here is the problem:
Whenever I reboot the Computer, It doesn't recognize the modem. If I right click the networks button on the top, go to edit connections, and Delete the mobile broadband connection I had previously configured, then unplug the device (usb) and reconnect it, The computer recognizes it, allowing me to reconfigure the connection (make a new mobile broadband connection). As you can guess, repeating this after every reboot is rather irritating.
Some Technical Details:
My pc: Asus Eee Pc 1001PX
My Mobile Modem: Zte WCDMA Netstick.
When I tried to update my Kernel, the Wireless Problem from Ubuntu 11.04 was back, and I had to reformat.
View 1 Replies
View Related
Feb 17, 2011
I have a laptop, installed with window XP. I just installed Fedora Core, re-formatted all parition on the system, and installed default packages. The installation was successful. But after I took out the installation CD and reboot the system, chose Fedora core (the only banner), the screen just become green, and nothing else from there.
The only thing I am not 100% sure is, during the installation, my monitor was probed as unrecognized. I have tried both 'go with default' and specify one "LCD 1024x...", but either way, after the installation, system won't reboot.
View 14 Replies
View Related
