Red Hat / Fedora :: Reboot After Installing F15?
Jun 10, 2011reboot after installing fedora15, it gives me the BAD EIP value error
View 4 Replies
ADVERTISEMENT
Fedora :: Installing F13 X86 On X3950 M2 - Server Hangs Or Reboot
Oct 14, 2010The server hangs or reboots when I install Fedora 13 x86 (32-bit) from DVD onto a quad core server (64GB of mem, 16 cores). Sometimes it gets as far as starting anaconda before the hang or reboot. I've been trying different combinations of kernel options, such as vesa, pci=msi, irqfixup, max_add=3072M, noapic, nolapic, noirqbalance, maxcpu=2...
But whatever I do, it hangs or it reboots. The 64 bit versions of RHEL5.5 and RHEL 6 Beta2 installs without problems.
Fedora :: System Hangs On Reboot After Installing Kmod-nvidia In F12 / Sort It?
Mar 31, 2010Having a problem with my system hanging after updating Fedora 12. Here are my system specs:
Gigabyte MA770-UD3 motherboard
AMD Phenom 9950 Quad Core
6 gig Corsair DDR 800
1 x 160 gig SATA (OS)
1 x 500 gig SATA (data)
I have my system configured for dual boot with Windows 7. After installing F12, I can reboot with no problem. However, after I install the kmod-nvidia drivers, my system hangs on reboot. If I press any key on the keyboard, it will start to load, the freeze until I press a key again. I have tried both Fedora 12 x64 and i386 with the same results. Here are the steps that I took to install the kmod-nvidia drivers code...
Does anyone have any suggestions as to what I am doing wrong?
Red Hat / Fedora :: Identify Reboot Source Or Cause Of Reboot?
Feb 16, 2011last -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies View RelatedCentOS 5 :: 5.1 Bash - After First Reboot After Installing In Text Mode
Dec 17, 2009I got this message after installing CentOS 5.1 in text mode and console:
It occures after the first reboot after installing:
I pushed TAB and get a list with possible commands.
I used "boot" but without success.
Ubuntu Installation :: Blank Flickering Screen While Installing After First Reboot Using Wubi 9.10
Mar 1, 2010The wubi installer copied files successfully and asked for reboot. After booting into Xubuntu the flashing logo appeared for a minute. And then the screen looked as if it was trying to show something but could not and flickered and then became dark this continued till half an hour and then I pressed Alt+Ctrl+Del.I tried all the modes but to no avail, only the last mode with command line was working. But it was not helpful for me becoz I dont know most of the commands.When I tried "Verbose Mode" as directed by the WubiGuide - Ubuntu Wiki, CTRL+ALT+F2 did not work when the installer stopped.The computer I use is assembled with Intel pentium 4, VIA chipset and Mercury(Kobian) motherboard.
View 3 Replies View RelatedUbuntu Installation :: Terminal Screen On Reboot With No GUI After Installing Nvidia Drivers On 10.04
Nov 4, 2010who installed nvidia drivers on Ubuntu 10.04 and gets a terminal screen on reboot with no GUI.I came across this fix trying to install the drivers on Ubuntu 10.10. later i find that the same thing happens to me on 10.04 but one of the fixes i came across works perfect with it. Ok, so you just installed ubuntu 10.04 updated it through update manager and installed your nvidia drivers but when you rebooted and tried to log on you find yourself in a terminal interface well i found an easy fix for that.
i hope it works for you not saying it will though im new to the linux world only just coming out of windows and i dont know much anyways just log on the terminal and use command "sudo dpkg-reconfigure xserver-xorg" then run nvidia-xconfig command reboot and you should be fine only wish this would work for ubuntu 10.10
General :: Embedded Reboot Crash - Error Executing The Reboot Command
May 4, 2011I'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.
View 2 Replies View RelatedGeneral :: Will Not Reboot After Install (Arch) - -bash: /sbin/reboot: Input/output Error
Oct 7, 2010I am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.
View 6 Replies View RelatedFedora :: Fedora LiveUSB - After Reboot Machine - System Backtrack The Original One
Nov 1, 2010Today I installed starDict in my Fedora LiveUSB, after I reboot machine. The system backtrack the original one, and then I update the kernel, the system also backtrack.
Why LiveUSB have this function. Can you explain theory about LiveUSB.
Red Hat / Fedora :: DNS Changes On Reboot?
May 29, 2011I hav got RHEL 5 installed on my system. i have two nic cards in my system. one of the ethernet card is connected to internet provider and another nic to another system in lan. I have configured one of the nics to get ip automatically from internet service provider and another nic has got static address. on reboot the static dns and dns search path assigned on second ethernet is also changing, may be coz i hav configured dynamic ip on another nic. in this situation am able to get internet but am not able to communicate with other system in lan. can we not have two different setting as we can hav in windows.
View 5 Replies View RelatedFedora Servers :: VNC After Reboot
Mar 14, 2009Ok this is one of those questions that have probably been made often. But I just CANNOT find a way around this on Fedora, and i have searched for it alot. Basically, after remotely rebooting my server, i'm not able to connect through vnc because the server needs to login. I've looked into an automatic login, but this is not the way i want to go. Edit: I'm using the default fedora vnc server, and RealVNC on my Windows computer. Been to ##linux on freenode, but at the time, noone there could answer me either.
View 5 Replies View RelatedFedora :: Reboot After Every Update?
Sep 5, 2009Why does it seem now I have to reboot after EVERY update ? I have been a Fedora user for YEARS !! I am on Fedora 11. It seems now that I get updates sometimes 3 to 6 times per week and it always has an icon to reboot !! I can't run a stable web server/DNS/email/NAS server if I have to reboot every day !! Why is every update requiring a reboot now ?
View 7 Replies View RelatedFedora :: Upgrade F11 To F12 Will Not Reboot
Dec 10, 2009At the end of preupgrade & upgrade a reboot was called for. After reboot, the only choice that appears in the boot screen is ... Upgrade to Fedora 12 (Constantine). The only thing to edit after typing 'e' is ... kernel /upgrade/vmlinuz preupgrade Repo=HD::/var/cache/yum/preupgrade->
initrd /upgrade/initrd.img
If I allow it to boot to "Upgrade" it tries to do a fresh install.
P.S. This was a lot of typing to do on an IPhone
Fedora :: Can't Reboot After Power Cut
May 15, 2011Unbeknown to us our son removed the battery and I unplugged the power cord. Instant off! Since then I can't restart. The error is very lengthy but each Control-D brings a reboot but the same sticking point. If I understand correctly I am asked to run setenforce as root. I did this and it does each separate file. How many will I have to do? Is there another way to restart?
View 4 Replies View RelatedRed Hat / Fedora :: Changes Don't Reflect After Reboot?
Nov 3, 2010I have installed fedora linux distribution on oracle virtual machine on windows.
The problem am facing is whenever I make changes( as in adding users, configuring web servers, making any kind of changes in files etc.).. and after a while I reboot my machine, I dont see any changes I made.. the changes do not just show up.
what could be the reason behind it and how do I fix it ?
Fedora Networking :: DNS Lost After Every Reboot?
Mar 2, 2009I have entered my primary and secondary DNS addresses through Network Configuration tool (system-config-network). But whenever I reboot the system it loses the DNS addresses. Following another thread, I tried changing the PEERDNS=no in ifcfg-wlan0; but it didn't work. I also put both DNS addresses in the ifcfg file, but that didn't work either.Does anyone know a solution to this?$ uname -aLinux fedoralinux 2.6.27.15-170.2.24.fc10.i686 #1 SMP Wed Feb 11 23:58:12 EST 2009 i686 i686 i386 GNU/Linux
View 11 Replies View RelatedFedora Networking :: Network Not Up After Reboot
Mar 10, 2009I have installed fedora core 9 and configures the ifcfg-eth0 script as below. my problem is the network is not coming up after reboot. after the reboot if i restart the network service(service network restart) network is coming up.
View 12 Replies View RelatedFedora Installation :: 10 Hanged After Reboot?
Apr 2, 2009i have a Emu10k1 sound card in my system , i did a installation and after reboot it hanged
View 1 Replies View RelatedFedora :: Xwindows Crash After Reboot?
Oct 19, 2009after playing games using WINE, I noticed that the system went Black screen of death.
I had to hard boot the system and now system is hanging. However, I can ssh into the system from another machine so I know only X windows hung.
I can log in using NX client without any issue, but can not log in from the console.
This is the entry from .xsession-errors:
GNOME_KEYRING_SOCKET=/tmp/keyring-4P86Nb/socket
SSH_AUTH_SOCK=/tmp/keyring-4P86Nb/socket.ssh
Window manager warning: Failed to read saved session file /home/stranger/.config
[Code]....
Fedora :: Reboot System Before Write DVD?
May 8, 2010I use Fedora12 AMD 64 and use Gnome and use K3B for write CD and DVD , when my system is ON for 1 hour and I want write DVD with K3B , I have to reboot system and after reboot , I can write DVD and I do not have problem , but when I do not REBOOT system and start write DVD , write 4.3 GB od DATA , take long time , and my fedora write on DVD in 8 hour and sometimes it take long time , but after reboot write one DVD take 16 min. I do not know why .
fedora work for 1 hour -----> when dose not reboot system --> take 8 hour for write one DVD Fedora work for 1 hour -----> when reboot system ---------> take 16 min for write on DVD
this is happen when I use brasero for write DVD. my HDD is 80 GB and I use Default partitioning rule for partition my HDD
Fedora :: Settings Not Saved After Reboot
May 24, 2010I'm having a problem with the mesa-dri-drivers-experimental, I bought a new monitor, Samsung 24" Widescreen LCD Monitor (B2430H) and my old monitor was a 24 inch too but with a different native resolution, my new monitors native resolution is 1680x1050 and I try to change the settings in the system settings/ display/ size&orientation area since the mesa drivers don't have a xorg.conf but my settings don't save after a reboot. Is there a config file for the mesa-dri-drivers-experimental where I can change these settings?
View 5 Replies View RelatedFedora :: Reload Partition Without Reboot?
Jul 13, 2010I make partition on fedora-12, after that it gives me warning
kernel was unable to re-read the partition table on /dev/sda (Device or resource busy). This means Linux won't know anything about the modifications you made until you reboot.
Is it possible to reload partition without reboot, i tried partprobe as well but no luck.
Fedora :: Script Execution Before Reboot?
Aug 31, 2010what i need is to execute a script before reboot actualy the system reboot faster than the script execute how can we force the system to wait for the script complete execution
its for my 11g database [URL]
Fedora :: After A Reboot Everything On The Screen Became Huge
May 13, 2011I just finished installing Fedora 14 and the nVidia drivers, and after a reboot everything on the screen became huge, almost as if I am zoomed in. Text, icons, windows, everything is too big. How do I fix this?
View 3 Replies View RelatedFedora :: Launcher To Reboot To Windows?
May 30, 2011I dual boot F13 and Win7. I usually use F13 for my daily OS, but I have been taking some classes and have not been able to get the software to run on Fedora. I remember reading a post a long time ago that gave a command to boot out of Fedora and directly into Windows without having to select it from Grub. I would like to put a launcher on my desktop that will run this command, but I can not seem to find it.
View 2 Replies View RelatedFedora :: F15 Works But Causes Next Reboot (into Any OS) To Crash?
Jul 19, 2011I haven't seen anything like it before. I have F15 installed dual-boot with Windows Vista, and I've updated packages. Booting into F15 works fine, no issues.
However: if I shut down and reboot into either (a) Windows or (b) even just the BIOS config screen, the system crashes abruptly after about 1 minute (with no warning/error) and tries to reboot. Booting straight back into F15 sometimes seems to cause the issue, but not always.
The reboot then fails, it doesn't even get to BIOS screen - all that happens is disk lights (HDD, DVD-ROM) keep thrashing. Manual reboot (hold power button for 4 seconds until shutdown; press power button to restart) doesn't help; reboot still stalls. Only disconnecting from mains power, reconnecting, and rebooting works.
It might not even be a Fedora issue - I've tried recent Ubuntu and Mint 11 live CDs, and they cause the same problem - but I'm posting here since I like my F15 installation and want to keep it I've noted that older distros on live CD (eg. F14, SuSe 11.3) don't seem to cause this problem. Maybe a recent kernel issue?
How can something in F15 persist across soft reboot and crash a completely different OS?
Red Hat / Fedora :: After Reboot No More Network And Internet
Aug 24, 2010I am having some problems with my CentOs 5 install. On Sunday I switched off my PC. I started it again yesterday, but after that no more Internet access and no more network access. When I go to SysTem * Administration - Network I can see what I had before restart. Nothing was changed. When I try to access to Internet, just get "No connection" problem.
When I try to access to the Local network, I CAN see the others pcs connected to the network, but after I click any of them I get a "Can Not see content" message. I really didnt do anything, didnt changed options... nothing... just shut down my pc and started it at next day as usually do. Im searching for info since yesterday and I cant find anything that work.
Red Hat / Fedora :: /home Not Mounting After Reboot?
Feb 25, 2011I have number of Red Hat enterprise Linux installs. Versions 5.2 5.3 5.4 and 5.5. I have the same problem with all of them.
I have /home on it's on partition and every time I reboot /home does not mount.
Has anyone come across this issue before?
I've tried changing the FStab, but still having the same problem
Fedora Installation :: Blank Screen After Reboot?
Jan 26, 2009I was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
View 14 Replies View Related