Fedora :: 11: X Windows Configuration Gets Messed Up After Reboot (X Server Crashing)
Aug 12, 2009
I recently installed Fedora 11 on my machine, the configuration of which is: Intel Core i7 920 CPU, 3 GB DDR3 SDRAM, nVidia GTX295 Graphics Card. I initially used the default kmod-nvidia driver, but with a yum update, somehow a non-PAE kernel got installed and the kmod-nvidia driver did not get installed with it during the update for some reason. So I uninstalled the PAE kernel and associated kmod drivers, and downloaded the nVidia driver from the nVidia website. It ran just fine for a few days, and then all of a sudden, after a reboot, the X Server crashed and I had to log into the text mode, run
Code: setup and do the default X configuration. Then, I re-installed kmod-nvidia, with no luck. Sorry for being so vague about this, but I finally managed to get the CUDA driver (I need to use CUDA for my project work) to work (downloaded from [URL]). But after one reboot, the same problem resurfaced.
Now, I am in X Windows with a default 800x600 configuration using a generic visa driver, on a 23" monitor I have been rebooting my computer all morning and trying various things to get the driver to work again. I would be happy to furnish any details about the installed packages I have. For now, here is some information.
[Code]....
View 14 Replies
ADVERTISEMENT
Apr 5, 2010
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
View 1 Replies
View Related
Dec 21, 2010
i just installed ubuntu and the apps i wish to use and well where do i start its freezing sounds crashing then my internet goes and most apps are crashing it makes the desktop unuseble. It works really well for like a haf an hour then crashes i never had this problem in windows witch i had on here before i may go back unless i can find some kind of fix.
View 9 Replies
View Related
Jul 20, 2009
Recently, I had the courage of installing Fedora 11 on my laptop while risking of trashing my Windows XP. Fortunately, the installation went fine and windows and fedora seems to be working together. But I needed to reinstall Fedora because I didn't do the partitioning right. After that the problem arises. I couldn't connect to the wlan. The first installation it was working fine. Now I can't. I select the network, enter the password and then it just says "Disconnected" or something like that then nothing else happens. So I had to reinstall it again thinking I did something wrong on the installation. But still it wasn't working. But it seems to be working when I boot from the live cd. I must have messed up my network configuration.
View 7 Replies
View Related
May 5, 2010
every time I reboot my machine the icon positions are messed up - they are all aligned to vertically to the left.
View 5 Replies
View Related
Jul 10, 2011
I had Ubuntu 11.04 and Windows7 installed on my computer. I thought of trying fedora 15 and installed it on a different partition. Now only fedora and Windows boot up. Can I triple boot my system and how? If not, how to get back Ubuntu 11.04 and Windows 7 as before.
View 5 Replies
View Related
Jun 27, 2015
Upgraded webserver to Jessie as an upgrade to Wheezy produced errors, and before reboot everything was up and running, but as all upgrade docs and info I read, I rebooted the server. However it never came back. I have the original backup files before I did the Wheezy upgrade. I also have access by Rescue to the server.Made a back up of critical files and have a 24GB tar file and I can connect by SFTP.
how to check the Debian files... Grub etc.. I would prefer to find the issue than start again.I am not able to sudo from Putty. I cannot run apt-get update. I did go to chroot, but then I get unable to resolve host errors and Could not open lock file because Permission denied errors and asking if I am root.There is information by googling for start up issues, but as I am working remotely with a Rescue set up, a lot of the commands I see and have tied do not work.
View 3 Replies
View Related
Jan 29, 2011
I`m relatively new to Linux and Ubuntu.Now I have been playing around, editing the settings files for the networks cards, and now I have messed things a bit up.Any way to delete all settings, and make Ubuntu autodetect my hardware again?
View 3 Replies
View Related
May 30, 2011
I dual boot F13 and Win7. I usually use F13 for my daily OS, but I have been taking some classes and have not been able to get the software to run on Fedora. I remember reading a post a long time ago that gave a command to boot out of Fedora and directly into Windows without having to select it from Grub. I would like to put a launcher on my desktop that will run this command, but I can not seem to find it.
View 2 Replies
View Related
Mar 31, 2010
I clean installed xubuntu on an old laptop. I think I messed up the original configuration of xorg though because the highest resolution is 800x600.
# dpkg-reconfigure xserver-xorg
or
$ sudo dpkg-reconfigure xserver-xorg
[code]....
View 1 Replies
View Related
Aug 25, 2010
I have been dual booting Windows 7 with Fedora for a while (using GRUB, with Fedora as the primary OS) but am running into some problems now.
When in Windows, I was notified that a folder was corrupt and was advised to run chkdsk. So I ran this in the command prompt:
Code:
chkdsk c: /F
which would run on the next reboot. When I restarted the computer, this didn't run.
I believe this problem has to do with the current MBR running GRUB, and not Windows immediately. In Windows, if I go to:Advanced system settings->Advanded->Startup and Recovery->Settings, the default OS is blank with no options available. Also, when running msconfig, under the boot tab, no OS is available.
I backed up the MBR in Linux and then tried to use the Windows recovery disk to do a repair, but no OS was found here as well.
If it helps any, here's what I get when I run 'fdisk -l'
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
View 2 Replies
View Related
Jul 9, 2011
I am in a bit of a jam. I had a dual boot backtrack 5 with windows 7, I had no need for the backtrack partition anymore so i deleted the backtrack partition and extended the windows NTFS to take up all free space, now my computer boots to grub but it will not boot into windows. I am currently in the process of creating a ubuntu live cd to do the following to repair the windows Master boot record.
sudo apt-get insall lilo
sudo lilo -m /dev/sda mbr
View 2 Replies
View Related
Jul 14, 2011
I just started using Ubuntu 10.04 for development reasons and installed Ubuntu on a seperate harddrive with dualboot option with Windows 7.Today Win 7 got an update and I mysteriously got bumped back to the grub screen after selecting Windows boot option, but my Ubuntu was ok. After that I probably did the worst I could, and googled the problem and tried out some years-old advices which messed up my ubuntu boot as well.I am currently using my computer through Ubuntu Live Usb.
View 6 Replies
View Related
May 2, 2011
After today's squeeze update the nm-applet (it updated it to version 0.8.4-1) crashes when trying to connect to my vpn (pptp). I'm pretty new when it comes to this so I'm not sure what to do. I tried looking at the log file (applications--> system tools-->log file viewer) but I don't know what to make of it.
Heres the log file before it crashes:
View 1 Replies
View Related
Oct 7, 2010
I recently upgraded my Ubuntu from 9.10 to 10.04 and now it's messed up my Windows Vista partition. When I try to load Windows it boots to a strange login menu with low resolution. It then takes me to a screen with options like Repair/Fix, Recovery, Complete Recovery... I'll click Repair and and then it will say No errors found, Shut down, Restart.
View 2 Replies
View Related
Feb 16, 2010
"My network" is behind a firewall inside a larger windows network with AD. My network has a Debian Server with samba 3.2 running. One of the hosts that are on the outside of my firewall has a share that I and other Linux-users on the debian server wants to access.
View 1 Replies
View Related
Sep 29, 2010
I need to set up a Debian server in a windows network so that users can securely ftp docs to the Debian server and then pull docs from the server when needed - using a secure ftp session. I have the Debian Server built and IP'd. Do I just need to set up the vsftpd.conf and thats it? Right now I am just concerned with getting ftp working.
View 7 Replies
View Related
Jun 9, 2010
I have been running Fedora 12 on my HP Proliant DL140 Server for about 6 months now without any issues, yesterday I ran yum update and rebooted afterwards but the server now wont boot
View 14 Replies
View Related
Feb 25, 2011
After a couple of days, some commands related to the disk (df) or files (ls) or killing process (kill -9) doesn't respond. Even I can't reboot or shutdown my server. After an hard reboot, some files are not here anymore or the log files are not filled anymore until I restart.My disk are behind the RAID controller i6 and are configure in RAID 1. The disks are two HP SCSI 72,8GB 10k RPM.Maybe I am totally wrong to check the disk access side, so I am open to other explanation.I can also add that my CPU is running under 1% et my RAM under 10%.
View 14 Replies
View Related
Aug 16, 2010
Forever I've been able to use "locate" to find files, but now it finds NOTHING at all and I have no clue why.. I tried apt-get install locate and it installed it, but it's not working in bash.
View 5 Replies
View Related
Mar 10, 2011
This seems to be a variant of a problem many people have had, but after several hours trawling through various forums, I haven't seen a reliable match for my situation.In brief:Adding a third boot partition (of Ubuntu) to my existing dual boot of OSX 10.6 and Windows 7 seems to have crippled the Windows boot from working, because Grub apparently takes over the process. Yet Grub does *not* appear to be on the Windows partition.
More verbose:I have an older MacBook Pro (3.1, running Snow Leopard) that I recently refitted with a new 240GB SSD HD. With the extra space (it was previously only 120GB) I decided to add a dual boot with Windows 7 using bootcamp. This all went swimmingly well.Encouraged, I decided to follow this Lifehacker article's suggestion and triple-boot the machine with Ubuntu (I'd never used Linux before):So I now have the nice rEFIt boot partition selection screen, and, indeed, I'm up and running in Ubuntu, and enjoying it.
Only one problem: I can't get into Windows any more. If I try to go in through rEFIt *or* by holding down OPT at startup and selecting the windows partition directly, the result is the same: I get thrown into Grub's selector, and selecting the Windows partition from there leads to an error message and a dead end.Having read through numerous postings, I get the impression that Grub is doing something or living somewhere that it ought not to be, but in most cases I've seen, people had accidentally installed Grub onto the Windows partition (or indeed onto EVERY partition). So far as I can tell, this isn't the case with me. Here's my boot summary:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 9 Replies
View Related
Oct 14, 2010
The server hangs or reboots when I install Fedora 13 x86 (32-bit) from DVD onto a quad core server (64GB of mem, 16 cores). Sometimes it gets as far as starting anaconda before the hang or reboot. I've been trying different combinations of kernel options, such as vesa, pci=msi, irqfixup, max_add=3072M, noapic, nolapic, noirqbalance, maxcpu=2...
But whatever I do, it hangs or it reboots. The 64 bit versions of RHEL5.5 and RHEL 6 Beta2 installs without problems.
View 3 Replies
View Related
May 24, 2011
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
View 3 Replies
View Related
Feb 2, 2011
I just installed Ubuntu alongside windows vista and now cannot reboot windows
View 3 Replies
View Related
Mar 8, 2009
I need to know how to configure automate sending sms if server reboot and shutdown? Now i just set sms notification once my server it's UP by create scripts in /etc/rc.d/rc.local while booting then from server sending sms notification. SMS - using gnokii attached mobibe phone. Server - Fedora 10
View 3 Replies
View Related
May 19, 2011
So basicly I just installed Ubuntu 11.04 and I am experiencing something I always experience when I install Ubuntu. I will be using a window and then when I switch to another window it will randomly crash and it takes me ages to be able to close it down, sometimes I can never close the window down. This has stopped me from being able to use any version of Ubuntu on my computer which is disappointing because I really love Ubuntu.
I have no idea how to fix this issue at all, I have downloaded drivers for Linux from the Nvidia website but I get a window saying it cant be opened, and no surprise after many efforts I can't even close that window. Its a .run file so I don't know if I have to run it via terminal? I am fed up of not being able to use Ubuntu because these windows freezing is making it unbearable to use.
View 2 Replies
View Related
Jan 4, 2010
If you hadn't guessed it from my last 3000(ish) java-related posts, I'm a Java n00b writing a Java Applet for a work project. I got to the part was I was about to write the applet code that would send HTTP requests to my CGI scripts. But I read some paragraphs in a book praising Java servlets as better that CGI because they are easier to use and give much better performance server side. My server load isn't very big, though, and I was wondering if it would be worth taking the time to learn about Java servlets and how to set up the server side configuration on my Fedora web server.
View 3 Replies
View Related
Dec 23, 2010
I installed a new squeeze serverXen Hypervisor runs the server as Dom0 anda virtual Windows XP.The server runs samba, postfix, dovecot, squid, cups and hylafax with a Frritz ISDN card (module fcpci.ko).The used memory of Dom0 rises slowly (about 5MB /h) until the system crashes.As a workaround i installed a reboot every 24 hours.htop shows normal behavior.The system is already in production, so i can't stop services to track this bug.I need some hints how to debug the running system to find out, where the memory gets lots.
View 3 Replies
View Related
Apr 23, 2010
My issue began with my resolution changing to 800x600 in Karmic Koala and then my inability to change it back to anything else. In my haste to fix it before going to work this morning I loaded a new xorg.conf without backing up the old xorg.conf with data not relevant for my monitor and now I'm in limbo. The good news, I hope, is that I also run 8.04 on the same computer so I do have access to what I hope is proper xorg.conf / I've modified the existing xorg.conf file and I'm still getting the "low graphics mode" message (EE) problem parsing the config file and (EE) Error parsing the config file. Fatal Server Error: no screens found.
View 9 Replies
View Related
Feb 16, 2011
last -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies
View Related
