I need to know how to configure automate sending sms if server reboot and shutdown? Now i just set sms notification once my server it's UP by create scripts in /etc/rc.d/rc.local while booting then from server sending sms notification. SMS - using gnokii attached mobibe phone. Server - Fedora 10
View 3 RepliesAfter a couple of days, some commands related to the disk (df) or files (ls) or killing process (kill -9) doesn't respond. Even I can't reboot or shutdown my server. After an hard reboot, some files are not here anymore or the log files are not filled anymore until I restart.My disk are behind the RAID controller i6 and are configure in RAID 1. The disks are two HP SCSI 72,8GB 10k RPM.Maybe I am totally wrong to check the disk access side, so I am open to other explanation.I can also add that my CPU is running under 1% et my RAM under 10%.
View 14 Replies View RelatedI'm trying to reboot the server (shutdown -r now).But it seems like nothing happened.
When I try "shutdown -c", the system prompts "shutdown: cannot find pid of running shutdown."
I have a LAMP server and need a web page to send email messages. I could do it with my Win 2k server through my cable service but can't seem to get it to work here.
View 9 Replies View Relatedi'm using James on Cent OS 5.4. NOw we figured out, that our firewall changes the signed mails on the signing gateway, which is the Cent OS Server with James. So... the question ist, how do i configure James to send mails out directly... not passing it to the firewall?
View 3 Replies View RelatedFurther to this LQ thread which Tinkster solved by suggesting the last command (thanks Tinkster) I have been exploring last -x reboot and have found that the reported duration is incorrect for the last reboot and shutdown when a old wtmp file is used. Not having a record for the following shutdown, last assumes that the system has been up until the current time and similarly for the shutdown.
The output comes in time order, latest first, each line showing the time of the reboot and the uptime from then to shutdown. Using last -x reboot shutdown to show the shutdown time, here's an illustration
Code:
shutdown system down 2.6.29.6-smp Sun Mar 7 15:35 - 03:02 (11:27)
reboot system boot 2.6.29.6-smp Sun Mar 7 09:35 (05:59)
09:35 until 15:35 is 05:59.
When the uptime exceeds 24 hours it is shown as (<days>+<hours:minutes) like this
Code:
shutdown system down 2.6.29.6-smp Sun Feb 21 12:39 - 13:20 (00:40)
reboot system boot 2.6.29.6-smp Sat Feb 20 09:39 (1+02:59)
09:39 until 12:39 the next day is 1 day 02:59.
The time in parentheses at the end of the shutdown lines is normally the time until the next shutdown.
So far so good. The incorrect output is for the last reboot and shutdown of an old wtmp file. Here's the output of last /var/log/wtmp -x reboot shutdown; last -f /var/log/wtmp.1 -x reboot shutdown
Code:
[snip]
reboot system boot 2.6.29.6-smp Fri Mar 12 07:42 (01:54)
shutdown system down 2.6.29.6-smp Fri Mar 12 01:31 - 09:37 (08:05)
wtmp begins Thu Mar 11 08:25:26 2010
[snip]
reboot system boot 2.6.29.6-smp Wed Mar 10 14:12 (15+01:42)
shutdown system down 2.6.29.6-smp Wed Mar 10 12:41 - 15:54 (15+03:13)
[snip]
The boot started at "Wed Mar 10 14:12" which had an actual uptime of 1 day 11:20 is reported as 15 days 03:13 which is the time from then until the last -f /var/log/wtmp.1 -x reboot shutdown command was issued. The time from shutdown to shutdown is similarly affected.
I have a heavily used file server that I want to restart, then if it requires e2fsck's on any volume to run them after it restarts. The only problem is that the server is rarely rebooted, and they said it might kernel panic because its been so long. I've heard there's a way to have it go past the kernel panic if it does happen, but I'm not sure how to do that or the other stuff.If it was a Windows server, I would schedule a shutdown with the force switch, and have the chkdsk's already scheduled for each volume on reboot. But for RHEL, I really don't know.I'm hoping this can be done, so that way I can have it kick off at say 7am, then when I get in at 8am it will probably be near the end of the e2fsck's so I can see what's going on.
View 11 Replies View RelatedI need to know how to send message (or execute script ) when the linux machine shutdown or reboot stage.
Actually I want to start a backup linux machine when main server shutdown or Reboot.
simply, how we can run script while init 0 OR init 6 command
Recently I installed Fedora 12 64bit in my HP Compaq 6720s. Among many other problems that I had and I solved with your help, I have the following problem:When I restart or shut-down Fedora 12 it crushes and hangs and only thing that I can do is to stop and restart my laptop by means of ON/OFF button.My question is:Is there any way to see this error (maybe some log file or something) so I can send this message or log file here in this forum and get some help?
View 1 Replies View RelatedI hoping someone can point me in a direction. I installed F13 KDE from the live cd and now when I Shutdown or Reboot, it takes 2 minutes and 8 seconds for the machine to power off. Yes, I timed it.Happens everytime like that. Even when booting from both "mainstream" live cd and the KDE spin live cd. When I hit the Shutdown or Reboot, it goes through the daemons/services shutdown the flashes up the Halting System or Please wait while the system reboots messages (respectivley), turns off the LCD and then just... sits with the power light on and hard drive activity light on. I should mention this is on a Toshiba Laptop about 2 years old now. Intel Chipsets. (Satellite Pro S300M-S2142 if anyone is really curious). The hard drive light stays on for about 1:03 minutes and then it turns off, at 2:08 minutes - the Power light finally turns off and the thing finally shuts down or reboots. If this sounds familiar, it's because it is and I've posted about it with F12 and it's still there with F13. Running kernel-2.6.33.3-85.fc13.x86_64
View 1 Replies View RelatedI don't follow why the Suspend option is there and the Reboot and Shutdown is not. Can anyone guide me to the code needed to add the selections. I know I can use a Terminal to shutdown or reboot but a simpler solution would be nice. I expect there are methods to fix most of what I don't like about Gnome 3 but I haven't found them yet. Is there a central place for the solutions needed to deminimalize Gnome 3? I really prefer one click control.
View 4 Replies View RelatedI want to change the reboot of ctrl+alt+del for shutdown, how i can do this in Fedora 15 ?
View 1 Replies View RelatedAm using Fedora 15, in which i was able to configure the proxy server and authentication. i confirmed this by configuring web broswer and it works. Now the problem is that i want to deploy it out to other computer system(client) i dont want to use the transparent proxy because the Proxy Authentication will not work.
I even tried to configure a DHCP server if it will work but i cant still configure for other computer system to work.
last week while I was using ssh to the computer1 inside a NAT as usual, I made another tunnel from the computer1 that I was connecting to, to another computer2 inside that NAT (ssh 192.168.1.130) and after making some changes in computer2 I typed reboot. The computer2 rebooted but the tunnel totally hung and I had to kill it in my laptop. Since that day I haven't been able to ssh to the computer1 as I am used to.
Here is some more information:
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/une/.ssh/id_rsa
[code]....
shed some light on what I am doing. I am wondering if I just havehings back to front.Server (MESH):Fedora 13Firewall ports open tcp 22(ssh), tcp 873(rsync)sshd service started
View 5 Replies View RelatedI am trying to redirect connection to port 8980 to execute a telnet command to a local machine
by issuing the following command :
In Server 1 :
socat TCP-LISTEN:8980,fork EXEC:/myscript,reuseaddr
My script contains
#!/bin/bash
telnet 192.168.20.12 //local Server 2
I am sending Binary data from the client to Server 2 via Server 1. So it happens that I have some characters in Hex translated to special characters in ASCII like open brackets or Commas etc.. and that closed the socket between the two machines.
In order to debug a problem, I want to list down as many as possible reasons of a server (SOAP server running on Fedora 10) sneding RST in middle of packet transfer. Please note that in my case, SYN and ACK of initial handshake went through. Server received request from client and started data transfer but then suddenly, server sent RST in between data transfer.
View 4 Replies View RelatedI just saw that my network is slowed so I watches the /var/log/squid/access.log where I get this line continuously....
[Code]....
I thought that someone running any script so I disconnect all my LAN connection (simply removed the local lan cable) but I saw the connections is going on....so I watch the processes on proxy server but nothing suspicious....So I change my static IP and the spamming stops (I say it is spam b'coz the IP 203.188.197.10 is of yahoomail.com ) but I when I am putting my OLD ip back the connection starts again......I want to put back my old static IP b'coz I have configured it for many services. Is there any spyware on my machine or someone configured my IP?
How to configure my home linux server, as an email server, and be able to send email to hotmail, please?. I have done this before, but I never managed to do it so hotmail accept emails coming from my linux server.
View 5 Replies View Relatedwe have a minor issue with time synchronization in proprietary equipment.the client needs to synchronize time with server, but not using NTP.it is not very important so doesn't need to be done often.the problem is that it won't synchronize. I can see the server is sending tcp packet with date&time, but the client ignores it.I suspect the problem is in format (manual specifies there are two possible options like MM: DD: YYYY and so on, but server seems to use some other)Is there an easy way to run some program in Linux Debian, to send that simple packet with correct date?
View 4 Replies View RelatedI am working happily with Fedora 8, evolution chatting happily to exchange 2003, calendar sync the works...impressed. This continued through Fedora 9 (though a little bumpy as all odd numbered Fedora releases are). On to Fedora 10, yes works a treat out of the box (DVD). A couple of updates to evolution later, through yumex (fedora updates), and evolution has stopped sending email to the exchange server. It's also touch and go whether I can read email using OWA.
On pressing 'Send/Receive' evolution pops the error,
Error while performing operation.
Exchange transport can only be used with Exchange mail source.
How could I back out these evolution updates?
I have recently upgraded to the 10.04 Alpha and have been unable to reboot or shutdown. I know it's just an alpha and therefore problems are bound to exist, so I tried reinstalling from a live cd of Alpha 3. But I am still unable to reboot or shutdown.To clarify what happens, I click on shutdown or reboot, the pop-up appears, I click on the shutdown/reboot button and it seems to complete it. It says that processes have been killed and something has exited with 255. But my computer is still on. I am guessing that Ubuntu is shutting down, it's just not actually shutting my computer down or restarting it.
View 5 Replies View RelatedI have a remote server (Xubuntu 10.04) which suffered an electricity brownout yesterday. The server itself is backed with an ups, but it is connected to a external firewire disk, which is not, and this disk malfunctioned as a result of the brownout.
The problem: Now, any process trying to access the external disk freezes and ends up in eternal D state in the process list, including ls and umount. Even trying to ls a directory which contains a symbolic link to a file in that drive just causes ls to freeze. These processes cannot be killed even with SIGKILL, so I proceeded to reboot but...
None of the reboot commands work. Instead they just get added to the ever increasing list of D state processes. I tried (sudo) shutdown -r now, reboot -f now and finally plain shutdown -h now. Is there anything else to try other than ask somebody to actually go to the server and pull the plug (which is not at all trivial)? Some way to tell kernel not to worry about messing stuff up, and just reboot?
we've just bought 30 newest nettops ACER Aspire R3700 with ION 2. I've tried ubuntu, kubuntu, xubuntu. Everything works as expected, but... the first one freezes when trying to reboot, shutdown or enter sleep mode. Checked on several hardware units. The desktop just freezes and nothing happens (ubuntu 10.10, both x32 and amd64). Also no one installs the wi-fi drivers, only ethernet
View 4 Replies View RelatedNatty won't shutdown for me - the start up/shutting down graphic comes up and the 'light' go down from 5 to 3 then it just hangs there.
Is there a shutdown log? I've looked in /var/log/messages but there's nothing relevant there.
From a 11.04 Ubuntu, I installed the meta-package xfce4 (*). Now, in the xfce4 session, "suspend" and "logout" (from the xfce4-panel button) works, but "shutdowmn" and "reboot" not, they only lead to GDM. (the shutdowm option there works.)
I tried to solve that by installing the meta-package "xubuntu-desktop" (maybe there are some necessary settings included?), and in fact, the login-screen changed (it's still GDM, I suppose) and there is now a "xubuntu" session, but in that, the probem is just the same: shutdown only leads to the login screen.
In Gnome Classic or Unity, shutdowmn works as it shoulds, so it's not a general problem with my computer.
In Detail, in forst tried to install xfce4 with ubuntu-software-center, but although it seemed to succeed, there was no xfce session. In Synaptic, installing the xfce3 metapackage worked. In fact, software-center seemed to have overlooked some dependencies...
I am facing the issue that the PC not capable to shutdown or reboot; In order to debug that, htop tells me the running processes but all seems normal, I killed few but still cold reset is needed.There is certainly a problem somewhere. the best would be to know which process are weirdly hanging. It could make this testing debian bit better to know which package has these issues.
View 1 Replies View RelatedI have installed a cluster computer with 10 nodes . The manufacturer is HP . All nodes and the master node have redhat enterprise linux installed in them . When I shutdown the nodes from the master terminal using "shutdown -h now" they get shutdown . But they dont get completely turned off . This issue bothers me when the power supply is given , all nodes boot up simultaneously generating a huge heat .
Thing to note : When we shutdown our PC they get completely turned off . When the power supply is given , a press on the Power On button is required to boot the system. But , why does it not happpen in the case of cluster? Is there any other way of completely turning off the nodes from the master terminal ?
I have a problem sending emails in the command line. I have introduced this command:
sendEmail -f my.account@gmail.com -t myself@domain.tld
-u this is the test tile -m "this is a test message"
-s smtp.gmail.com
-o tls=yes
-xu usernameonly -xp mypasswd
But then I received this message:
sendEmail[13230]: ERROR => Connection attempt to smtp.gmail.com:25 failed: IO::Socket::INET: connect: Connection timed out
I have a laptop (running Fedora 10 KDE version) and a desktop (running Ubuntu 7.10) on my home network. Is there any way to send messages from one computer to another through LAN ?
View 5 Replies View Related