Fedora Installation :: "no Device To Install To" When Select HD
Mar 26, 2009
I'm installing FC-686 onto a Dell 6300 server with several drives, one 300+gig and about 5 9gig drives. The install disk loads fine but when I select install to HD it tells me that there is no device to install to. Obviously doesn't see the HDs. I have used the internal program to format the HDs, I think I selected RAID 3. I wanted to use all the HD space as my data is not critical requiring RAID 5. Unless someone convinces me otherwise. I did this also because I wanted to maximize disk space. What else to do with 9 gig drives?
View 4 Replies
ADVERTISEMENT
Apr 10, 2009
I downloaded the full install of Fedora 10. I burned the DVD and it booted okay. Going through the startup stuff, select language, keyboard, ect and then I choose the dvd as the source of the image. Then I get "no driver found" and gives me the option to choose from a list of drivers or to use a driver disk. I saw something in the forums about someone having the same problem but theirs was a video card issue. On the list of drivers it looks like they are network card drivers. I have no idea what to do. I am using a NVIDIA Geforce FX 5500 if that helps. I also did not verify the iso, though wouldn't it not boot at all if the iso image was broken?
View 7 Replies
View Related
Apr 16, 2010
I tried to install F12 on my new IDE-HDD. The installation completed without any errors. But, when rebooting my PC I got a dark screen with error message: reboot and select proper boot device.
No BIOS boot up issue, since booting up using other hard disk running windows has no problem at all. I have set the hardisk jumper to master/primary, tried to re-install F12 a couples of time, but didn't make any difference.
View 2 Replies
View Related
Feb 14, 2011
For some time, I have been trying to install fedora 14 on my pc, as I want a dual boot machine. It has windows xp already installed and running. I used liveusb creator to make a bootable usb. the problem is, when I log in and start the installer, it runs until I get the option "Select storage device". When I select the appropriate option , basic storage device, the installer screen disappears, and nothing more happens. I shall be much obliged if someone can point out the problem. My computer is a Dell optiplex 745 , 2.8 GHz with 512 Mb of RAM.
View 5 Replies
View Related
Oct 12, 2009
When I try to install CentOS 5.3 and when this dialog. Select device Driver to load. I try to install it on ASUS Server.
View 8 Replies
View Related
Jun 14, 2011
I've been trying since ever to install the new ubuntu on my FakeRaid controller and I'm really starting to get frustrated. After restarting, i get the message "reboot and select proper device.." So my first tough was that my grub was not installed properly. So i ran the boot_info_script.sh that I found in the forum and here is my output. It says that the boot loader is not installed and my Raid is screwed up. I went look in the BIOS and everything looks fine. Ive put the result.TXT from the script.
Quote:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of
/dev/mapper/ddf1_00000000000000004b1ba2914b1ba291f5010000f5010 000.
ddf1_00000000000000004b1ba2914b1ba291f5010000f5010 0001: ________________________
[code]....
View 2 Replies
View Related
Apr 5, 2010
I'm new to Fedora (not linux) and I was wondering how I would go about doing a minimal install of fedora 12. I downloaded the live disc but it doesn't give me installation options (I'm new to minimal installs so I don't know that much). I also searched all over looking for a fedora minimal install iso, something similar to the ubuntu minimal install iso that is only 12mb.
View 14 Replies
View Related
Jan 30, 2010
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2c8e2c8d
Device Boot Start End Blocks Id System
/dev/sda1 * 1 6 48163+ 7 HPFS/NTFS
/dev/sda2 7 34329 275699497+ 7 HPFS/NTFS
[Code].....
View 2 Replies
View Related
Feb 28, 2009
I was able to install Fedora 10 from the Live KDE CD, however I can't boot it.
I placed it on /dev/hda4 of an IDE disk, while on /dev/hda1 I have a RedHat 9 Linux, /home is on /dev/hda2 and the swap is on /dev/hda3. I'm not sure if RedHat 9 and Fedora 10 can coexist on the same HD.
There's an option in the Live KDE CD boot install, which allows one to select:
boot from hard disk:
Do you know what to type in in order to direct Fedora to boot from /dev/hda4 (who may be /dev/sda4 as seen by Fedora)?
P.S. For the time being, I want to forget about Grub or LILO and see if I can boot it this way first. I have LILO working, it boots Windows from a separate disk and RedHat 9 from /dev/hda1.
View 3 Replies
View Related
Jan 31, 2010
i dont know if this is the right section for this but i installed linux after i installed windows server 2003 and some how the grub loader got messed up and wouldnt show, only windows would boot. i fixed the grub loader through my live disc and when i select Other operating systems i get Error 11: Unrecognized device string. here is my fdisk -l.
Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x2c8e2c8d
Device Boot Start End Blocks Id System /dev/sda1 * 1 6 48163+ 7 HPFS/NTFS /dev/sda2 7 34329 275699497+ 7 HPFS/NTFS /dev/sda3 34330 38227 31310685 83 Linux /dev/sda4 38228 38913 5510295 db CP/M / CTOS / ...
Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x99b707d2
Device Boot Start End Blocks Id System /dev/sdb1 1 38912 312560608+ 7 HPFS/NTFS
Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080
Device Boot Start End Blocks Id System /dev/sdc1 1 6 48163+ de Dell Utility /dev/sdc2 7 38227 307010182+ 7 HPFS/NTFS /dev/sdc3 38228 38913 5510295 db CP/M / CTOS / ...
and here is my menu.lst
[Code]......
View 2 Replies
View Related
Apr 28, 2009
I have two BT USB adapters on my fedora9 (2.6.27.19-78.2.30.fc9.x86_64).How i can tell which of them to bind as /dev/rfcomm0 device.It seems that rfcomm.conf doesn't say me too much about.
View 3 Replies
View Related
Jan 12, 2009
Installing new Intel server S5000VSA (Sapello) motherboard with RAID 1. Downloaded F10 32 bit DVD and run install. Everything works fine and select Samba and all that. Install completes but on reboot get a blank screen.
I know with Windows one has to load the RAID driver off the Intel driver CD, so guess that is the problem. But how do I do this in Fedora? Question: How do I get to select the Intel RAID driver in the install process? There does not seem to be any place to stop and make this selection. I tried selecting the Red Hat and Suze installs on the Intel configuration assistant but it then reboots and that is it. In Windows it would ask to insert the Intel driver CD but that does not happen. So I am stuck. I loaded Fedora some 3 year ago and like it but then it was not on a RAID setup. I created a VMWare install on my desktop and did the same install options and it works. So the DVD seems fine.
View 3 Replies
View Related
Mar 15, 2010
When I attempt to install the OS on my PC, the install software crashes immediately after I select US-English on the first screen. I'm copying the entire error report below. My system is configured as follows: Gigabyte P35-DS3R motherboard with 4G RAM. (FYI, I'm using the 32-bit LiveCD just because I may need a 32-bit OS for some purposes. I know this means I may not be able to use all of my RAM.) There are 3 500G hard drives connected to the computer. /dev/sda and /dev/sdb are RAID-1 mirrors via the on-motherboard ICH9R RAID chip. The logical partitions show up as /dev/dm-1, /dev/dm-2, /dev/dm-3, /dev/dm-4, and /dev/dm-5. When I type `fdisk -l`, I can see sda, sdb, and dm-* all separately. (I can provide the full output of `fdisk` if anybody wants to see it.)
/dev/sdc is a standalone drive without RAID.
I want to install Fedora on /dev/dm-2 with swap on /dev/dm-5. Currently, /dev/dm-1 and /dev/sdc2 each contain a separate installation of WinXP. I suspect the problem is with detecting RAID, thus I have deleted most of the error report that doesn't seem to concern storage detection.
[code]....
View 4 Replies
View Related
Apr 16, 2011
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
View 9 Replies
View Related
Dec 23, 2015
I downloaded and mounted debian-8.2.0-amd64-netinst.iso on my work machine's VirtualBox v5.0.12 to check out Debian stable/Jessie's installer and clean installation in case I need to do it soon. I like the new installer compared to 11/24/2011 on my old desktop machine. It is much nicer, fancier with its advanced options, etc.
However, I ran into issues with its "Select and Install" part when I selected desktop managers (e.g., KDE and Gnome) and continued. It failed as shown in [URL] .... images. Why? I tried again from scratch and same thing. If I don't select any and just select non-GUI stuff (e.g, SSH and standard system utilities), then it works but I want the pretty GUI stuff.
View 14 Replies
View Related
Jan 7, 2011
I'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
View 8 Replies
View Related
Jan 8, 2011
Is there any way to select which output device a program uses? I notice many Ubuntu programs lack the choice to choose where the sound is outputted, for example Rhythmbox and Exaile.I have 3 sound outputs (Internal, PCI, HDMI) connected and I'd like to for example use the PCI card as default audio device but play music from Rhythmbox through the internal motherboard output.
View 2 Replies
View Related
Mar 4, 2010
I'm trying to install the ubuntu netbook remix on an older Eee PC (4 gig SSD drive), and it's not letting me get past the prepare the disk space.I'm booting from a USB key, and I can get it and do various things from the live image. However, when I go through the install, it gets to the "prepare disk space" screen, and then I can't proceed. Screen looks like this:Prepare Disk SpaceThsi computer has no operating system on it.(blue bar)free space 4MG, /dev/sdb11 3.7GBWhere do you want to put Ubuntu-Netbook-Remix 9.10? Install them side by side, choosing between them each startup (this one is selected) Erase and use the entire diskgreyed outlist box is shown, refers to sdaThis will delete Debian GNU/Linx (4.0) and install Ubuntu-Netbook-Remix 9.10o Use the largest continuous free spaceo Specify partitions manually (advanced)bar with slider for free space, /dev/ddb1, and Ubuntu-Netbook-Remix 9.10And then nothing else - no forward button, or anything like that.
View 2 Replies
View Related
Mar 25, 2010
ok i have a trouble and the disk load... language and when i select apear statusbar but them nothing... i have a MSI DKA790GX, Athlon X2 5000+ BE, 2GB DDR(800), 500GB HDD, Ati Radeon 4870
View 4 Replies
View Related
Nov 21, 2010
I have 2 Debian OS's and wanted to put Fedora next to it.
Install went ok, but after rebooting it says: "No root device found. Boot has failed, sleeping forever."
During install from the live CD I didn't "v" the boot (efi or something?) because I thought Grub would take care of everything.
Should I just reinstall again and choose the Fedora bootloader? Won't it mess up Grub?
View 14 Replies
View Related
Jul 6, 2010
I use a USB webcam with a built in microphone. It works fine, but every time I plug it in I have to go to sound properties and select it as the input device. There are no other input devices present on my system. Since it's the only one there, is there any way to get it to automatically select when I plug it in? If not, I think that would be good functionality to add. Does anyone know who or what team to contact about that?
View 3 Replies
View Related
Oct 1, 2010
i know skype on Linux is crap but i have no choice as i now have only Ubuntu installed on this pc & I NEED SKYPE.so with the new version how do i select a particular sound device.i ask because skype only lets me select a specific sound 'platform' (pulseaudio).i have a motherboard with on-board sound & a USB voip phone (us robotics) and it the usb voip phone i want to use solely for skype
so is there something i can tell pulse audio that i want skype to ONLY use the usb phone or do i have to use the stupid sound preferences to change the system wide device to the usb phone which makes the whole thing a hindrance because i have no idea when someone calls me & when i have to quickly change the settings then turn off music then try to answer the call the person calling has gone!!!i like to have music playing in the background out of my hifi & the error noises come out of the usb phone as well when this is selected & to be honest it makes having a pc setup with multiple devices pointless and a hindrance
View 2 Replies
View Related
Dec 19, 2015
I had downloaded Debian 8.2 (Jessie) below files all are checksum passed. During installation after the 'Select and install software' stage the process halts and unable to proceed further.
debian-8.2.0-amd64-DVD-1.iso
debian-8.2.0-amd64-DVD-2.iso
debian-8.2.0-amd64-DVD-3.iso
I get the following error.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation step failed
An installation step failed. You can try to run the failing item again from the menu,or skip it and choose something else. The failing step is: Install the system.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
View 13 Replies
View Related
Mar 21, 2011
what's going wrong? :S:S
View 3 Replies
View Related
Apr 30, 2011
I have just tryed to install Ubuntu 11.04 onto a USB to install on a netbook. I used the software recomended to prep the USB and booted to it.
In the opening menu where you can select to install on a partition I am unable to press enter, it seems to just reset the menu. The keyboard seems to be working fine because I can use the arrow keys.
I have been unable to find a solution to this problem online, all I have found is this simular issue, with no resolution.
[URL]
The netbook I am using is the Samsung n220 which apparently works well with ubuntu.
View 3 Replies
View Related
Mar 17, 2010
I just brought up FC12 on our VSphere to begin testing..The nic did not configure properly for some reason.. I was able to go to command line, and do an "ifup ifcfg-eth0" and DHCP got an address. Go into GNOME - System-Administration - Network , or system-config-network the "Activate/Deactivate" is greyed out. Also, GNOME - System-Administration - Network Device Control show NO device..
View 1 Replies
View Related
Sep 11, 2010
can't select anything to install in OpenOffice 3.2.1 in Fedora
View 1 Replies
View Related
May 3, 2010
I appear to be unable to select individual updates for installation anymore from the Yast Online update screen. I use this to install updates manually on 11.1. But everytime I think I've chosen an update to install, all the updates listed get installed, and not just the one I've chosen. For example I just chose a "Fuse security update" to install and clicked the "Install" button. Nothing further happens until I click "Apply". Then all patches listed under the "All available" listing get applied. How do I just apply the patches that I want to ?
View 4 Replies
View Related
Apr 21, 2010
I'm trying to install fedora with the live cd into my windows machine. When i get to the select drive nothing can be selected.
View 1 Replies
View Related
Sep 19, 2009
I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies
View Related
