Ubuntu Multimedia :: Skype - Select A Particular Sound Device?
Oct 1, 2010
i know skype on Linux is crap but i have no choice as i now have only Ubuntu installed on this pc & I NEED SKYPE.so with the new version how do i select a particular sound device.i ask because skype only lets me select a specific sound 'platform' (pulseaudio).i have a motherboard with on-board sound & a USB voip phone (us robotics) and it the usb voip phone i want to use solely for skype
so is there something i can tell pulse audio that i want skype to ONLY use the usb phone or do i have to use the stupid sound preferences to change the system wide device to the usb phone which makes the whole thing a hindrance because i have no idea when someone calls me & when i have to quickly change the settings then turn off music then try to answer the call the person calling has gone!!!i like to have music playing in the background out of my hifi & the error noises come out of the usb phone as well when this is selected & to be honest it makes having a pc setup with multiple devices pointless and a hindrance
I can get my Plantronics USB headset to work with Skype. So far so good.
However if I plug the headset in to use with skype, I have to go to sound preferences to get the usb headset to be the selected audio device. It is automatically detected but is not selected.
Is there a way to have ubuntu netbook remix automatically select the usb headset as soon as it is detected after being plugged in?
Win7 behaves this way and my wife is used to it. Visiting the sound preferences every time the headset is plugged in won't do. Answering a call in Skype requires that the headset be selected straight away. Leaving it plugged in all the time isn't convenient either.
ASUS EeePC 900 Ubuntu Netbook Remix 9.10, recently updated.
Don't want to have to resort to installing Win7 again.
Forgive my newness, but here goes. I installed CentOS 5.5 on a Dell with a Soundblaster card. The soundcard config utility recognizes the device as: Vendor: Creative Labs Model: CA0106 SoundBlaster Module: snd-ca0106 I am able to play the default sound in the utility, however, I get no sound when I select the device in Skype as Default Device CA0106. Is there a permission somewhere I am missing, because I noticed when I try to play an internet radio stream using Shockwave Flash, I also have no audio.
I use a USB webcam with a built in microphone. It works fine, but every time I plug it in I have to go to sound properties and select it as the input device. There are no other input devices present on my system. Since it's the only one there, is there any way to get it to automatically select when I plug it in? If not, I think that would be good functionality to add. Does anyone know who or what team to contact about that?
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound. 2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I'm running Ubuntu Maverick on an Intel H55 mobo. I have the sound configured to output through speakers on my monitor, via HDMI. That has been working fine. Last night I installed Skype (2.1.0.81) in order to chat to someone back in UK. When I go to the sound devices configuration in Skype, each of the devices (Microphone, Speakers and Ringing) only have a single choice: 'PulseAudio server (local)'.
In order to get my usb-connected phone handset working with Skype I have had to go to the main sound preferences and alter both input and output to '9980 Analog'. This works fine - I can make a Skype test call and playback my own voice. However, all my system sounds now go out on the usb phone handset - also the Skype ring goes to the handset, which is pretty useless because it can't be heard from more than a couple of feet away.
How can I make Skype use the 9980 device for voice in and out, and use the system speakers 'Internal Audio Digital (HDMI)' for the ringing, while leaving all the system sounds to go out on the HDMI output too? I'm sure that I managed to make Skype work much better on an older system (using Gutsy, or Intrepid???). It seems, to me that there is a lack of fine audio control in my system.
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
Everything was fine last night, but this morning I signed into my Squeeze box and found that website play audio fine, Hulu Desktop works, some games work, etc. but Rhythmbox, VLC, Totem, and others don't . It all started with an attempt to diagnose a lack of sound in TVtime.
I installed skype, and all the sound works, except for the fact that it doesn't ring when someone calls me!!! All i see is a little pop up that says someone is calling me, but I cannot hear the ringtone. When i pick up, i hear the other end clearly, there's just no ringtone with someone calls me
Does anyone else have this problem? Does anyone know how to fix it?
I'm having a problem with Skype. Whenever someone calls me, the incoming call popup shows up, but I can hear no sound playing. Further, if I go in Options/Notifications and try to test the incoming call event, I'm having the same problem.
The .wav file exists and Skype can play it back. I have tested this by assigning that particular .wav to a different event, where it works as expected. Additionally, the other events, e.g. outgoing call, appear to be working normally. This would suggest, that the problem lies with the incoming call event, rather than the particular sound.
I love new Ubuntu 10.10. However, despite my best efforts, I cannot make sound recorder/skype work. That is, microphone would not simply record any sound. My mother board is Asus M2N68-AM.
I'm using Ubuntu 11.04 x32 Today I started Skype and I couldn't hear the Skype logging sound. Nevertheles I could see the contacts online. When I tried to write messages in the chat they couldn't receive them. When I tried to call nothing worked. After that it seemed that Skype was completely blocked. I clicked with the right button on the green icon of Skype and chose "quit" but it wouldn't close. 1 I logged off from Ubuntu and on again. I opened Skype. I made right click in the green icon and chose "Options"
2 I went to the "Sound Devices" menu in the left part of the window
3 I removed the tick for "Allow Skype to automatically adjust my mixer levels"
4 I closed Skype and opened it again and the sound problem was gone.
I've installed Skype on my Debian Lenny AMD64 system using method describe in [URL] . I also installed pulseaudio using aptitude, but not sure that this required.
I can sign in to Skyp, call out to my local phone number; phone rings. But I have no sound through my Logitech ClearChat Comfort USB headset and no sound is heard on the phone.
If I click on Applications/sound & video/pulseaudio volume control, I get:
Connection failed: Connection refused
1) Am I missing a configuration step? If so what do I need to do where?
2) If not configuration, is there another issue that needs to be resolved? What? Where?
3) Why do I see Connection refused when I clike on pulseaudio volume control?
Note: I tried to listen to npr, but no sound there either.
On my Acer laptop, I have Ubuntu 8.04.4 LTS and a static version of the Skype Beta 2.1, specifically version 2.1.0.81. I recently made the upgrade to it from an earlier version because I needed to have the screensharing feature to work. Previously Screensharing from others was showing up in a tiny window I couldn't resize. But the Skype Beta 2.1 works fine regarding screensharing.
But the problem I'm having now is that the sound intermittently goes away, but only for Skype. It seems to go away if I walk away from my laptop for a long time. When this occurs, I cannot hear or record sound through Skype, but it works fine through other applications. If I shut Skype back down once it is in this failed state, and come back in, then it remains in this failed state. The only resolution is a reboot, and then it's fine again.
The only thing I can think might be the issue is the Gnome Power Manager, perhaps? I mean, my fan on my laptop spins down if I walk away for a long time, so I know some kind of laptop power management is engaging.
I tried following this guide:
[URL]
And it suggested removing PulseAudio and using esound instead. Well, I tried that and rebooted, and my desktop wouldn't boot properly. So, I did CTRL+ALT+F2, logged in, and then did "sudo apt-get update; sudo apt-get install ubuntu-desktop". All was well again, but unfortunately it brought back PulseAudio again.
I just freshly installed 10.04 and I found that the sound doesn't work with Firefox and with Skype2.1.0.81 (though I get perfect output in Amarok and I can record from the mic just fine using QARecord). I have an Intel ALC880 integrated card and neither issue was present in 9.10.
I have a toshiba m305d satelite laptop i installed ubuntu karmic 9.10 and evrything seems to be working fine including wireless and ethernet which was not working previously .. but now with alsa my mic was not working and hence i uninstalled alsa and installes oss4 as was directed by other forums .. however with alsa my sound was working in skype but now nothing seems to work .. i am getting error as "problem with audio playback" i am using skype 2.0 as 2.1 was said to be not compatible with oss4 also the sounds in my pdgin im client is not working ..
here is my component information code...
i have tried checking mic using ossrecord but dint get ne output.. i also tried sound recorder which also dint work with both alsa and oss4
now the thing is with oss4 even the speakers are not working for some applications like pdgin and skype which was working with alsa
I have a Debian Sid x86_64 installation on my laptop. I used to use skype a lot when I was on ArchLinux in chrooted 32bit environment. Nowdays, I tried running skype straight on the 64bit environment, when I finally got it running, I couldn't get into sound settings, it froze right when I clicked the Sound options... So I decided to make the 32 bit environment, so I used debootstrap and schroot and now I have fully functional 32bit chrooted system. It does the same thing all over again! it drives me crazy... I should probably tell you, I use pulseaudio. This makes it a little hard to like the distro for me... I used to be an ArchLinux user for quite few years, but I didn't want to solve so many things every day, so I went with debian
I have quite a strange problem with Skype and Opensuse. First problem was that when I used microphone on Audigy 4 (from some reason recognised as Audigy 2) the sound which people received from me was very chirpy. This problem was solved easily, I just turned my on-board sound system on and started using micorphone from integrated card. And here comes my weird problem. Microphone works all right, but only for short period. After some time after I start talking to someone on Skype the microphone turns itself off, but I can still hear my interlocutors. The only solution is to go to Yast and restart sound system or to restart whole computer, both of which are not real solutions, but well, they sort of work. I'm using Opensuse 11.2 x64.
I installed "Theocracy" on my 9.10 Karmic system. The installer asks for a sound device, dev/dsp is the default and I didn't change it. When I now try to start the game, I get the following error: Unable to open sound device: Device or resource busy Aborted Execution of /usr/games/theocracy_base/theocracy.real failed! What is the sound device when using PulseAudio on Karmic?
I don't have any sound in my external device (TV). I'm attempting to watch a movie on the VLC player but I can't seem to get the sound to work through my television speakers! They are coming out of my computer speakers just fine though.
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
I have got my headset connecting to the system using the BlueMan interface. When I first did this it gave me a error about not being able to put the sound on-top of 'pulseaudio'. Well this well about the last straw between me and Mr. 'PulseAudio', so away he went. I removed the demon via this instruction. [ubuntu] Safely Remove Pulseaudio?
I then tried connecting to my bluetooth headset again, no errors. But the bluetooth sound device does not show up in any mixer, or application. What else do I need to do to get this working again. I know my hardware is fine, it used to work in the previous version of Ubuntu and it all works on my wifes Windoze XP computer.
i am using ubuntu studio karmic and i have a digitech vx400 audio effects pedal which serves as an audio in/out midi in/out device via usb. i can sucessfully set it as the system sound device in system>preferences>sound for both input and output. but, when i play audio through it it only works for a few minutes before the sound stops completely. if i leave the system settings set to the internal sound card and configure jack audio connection kit to go to the usb device, i get the same results on the usb sound. a few minutes of playback at the most.i can restart sound with either "pulseaudio --kill && pulseaudio --start" or "alsactl init" in either situation. just requires restarting the programs. same results after restarting. i think this is alsa related as i have both the system sound and jack using the alsa driver, but i don't truly understand the relationship between pulseaudio and alsa.
I have two sound cards active on this machine and they both work fine. However I would like to blacklist one card from being used for audio capture in KDE, because I am already using it outside of KDE for timed recording. The problem is that when I start amarok while timed recording is going on, it attempts to probe the card and this causes the recording to abort.
In Configure desktop > Multimedia, I can see the two cards. I can alter the priority but the Remove button is greyed out. So I can't remove a card from phonon.
Searching around for where phonon stores its configuration led me to ~/.config/kde.org/libphonon.conf. This certainly looks like the info I was trying to edit, but it's encoded in some way code...
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
I was having issues with the mic or line in on my onboard sound card, while trying to get my tvtuner patched in, later I gave OSS a try, I could not get it to work and decided to go back to Alsa, now my soundcard is not functioning.I have followed quite a few different guides, one of which is the sticky, please forgive me for not remembering which guides. I'm going nuts over this.As you can see below it looks like it is still using the oss driver.
uname -a Linux freekbox 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 i686 GNU/Linux
aplay -l aplay: device_list:223: no soundcards found...[code].........
