Debian Installation :: Unable To Go Further After Select And Install Software
Dec 19, 2015
I had downloaded Debian 8.2 (Jessie) below files all are checksum passed. During installation after the 'Select and install software' stage the process halts and unable to proceed further.
debian-8.2.0-amd64-DVD-1.iso
debian-8.2.0-amd64-DVD-2.iso
debian-8.2.0-amd64-DVD-3.iso
I get the following error.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation step failed
An installation step failed. You can try to run the failing item again from the menu,or skip it and choose something else. The failing step is: Install the system.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
View 13 Replies
ADVERTISEMENT
Dec 23, 2015
I downloaded and mounted debian-8.2.0-amd64-netinst.iso on my work machine's VirtualBox v5.0.12 to check out Debian stable/Jessie's installer and clean installation in case I need to do it soon. I like the new installer compared to 11/24/2011 on my old desktop machine. It is much nicer, fancier with its advanced options, etc.
However, I ran into issues with its "Select and Install" part when I selected desktop managers (e.g., KDE and Gnome) and continued. It failed as shown in [URL] .... images. Why? I tried again from scratch and same thing. If I don't select any and just select non-GUI stuff (e.g, SSH and standard system utilities), then it works but I want the pretty GUI stuff.
View 14 Replies
View Related
Apr 30, 2011
I have just tryed to install Ubuntu 11.04 onto a USB to install on a netbook. I used the software recomended to prep the USB and booted to it.
In the opening menu where you can select to install on a partition I am unable to press enter, it seems to just reset the menu. The keyboard seems to be working fine because I can use the arrow keys.
I have been unable to find a solution to this problem online, all I have found is this simular issue, with no resolution.
[URL]
The netbook I am using is the Samsung n220 which apparently works well with ubuntu.
View 3 Replies
View Related
May 3, 2010
I appear to be unable to select individual updates for installation anymore from the Yast Online update screen. I use this to install updates manually on 11.1. But everytime I think I've chosen an update to install, all the updates listed get installed, and not just the one I've chosen. For example I just chose a "Fuse security update" to install and clicked the "Install" button. Nothing further happens until I click "Apply". Then all patches listed under the "All available" listing get applied. How do I just apply the patches that I want to ?
View 4 Replies
View Related
Mar 21, 2011
what's going wrong? :S:S
View 3 Replies
View Related
Oct 17, 2014
I am trying to install Debian wheezy 7.6 stable, i made a bootable pen drive with netinst but when it arrives the select and install software part i got a error that i cant know what error is because it does not show its name. Just appear a red screen saying that a part in installation fails: Select and install software. I guess that this error is when it is installing tasksel.
View 2 Replies
View Related
Aug 19, 2011
just installed Fedora 15 on my system alongside Ubuntu 10.10 on My 500 GB hard disk.However on starting the computer the Fedora 15 partition gets loaded automatically. How do I access
my Ubuntu 10.10 partiion? I want to have a choice at start-up which OS to use. On my previous computer when I used to have Windows and Ubuntu,a menu used to appear asking which operating system to load.
View 1 Replies
View Related
Jan 7, 2011
I'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
View 8 Replies
View Related
Oct 28, 2014
I wrote the hybrid DVD image for DI b2 (Jessie) on the USB drive and booted from it (UEFI mode). But I don't see KDE there in the advanced options. Was it removed from the image, or desktop environment selection is moved to some late stage now?
View 2 Replies
View Related
Mar 4, 2010
I'm trying to install the ubuntu netbook remix on an older Eee PC (4 gig SSD drive), and it's not letting me get past the prepare the disk space.I'm booting from a USB key, and I can get it and do various things from the live image. However, when I go through the install, it gets to the "prepare disk space" screen, and then I can't proceed. Screen looks like this:Prepare Disk SpaceThsi computer has no operating system on it.(blue bar)free space 4MG, /dev/sdb11 3.7GBWhere do you want to put Ubuntu-Netbook-Remix 9.10? Install them side by side, choosing between them each startup (this one is selected) Erase and use the entire diskgreyed outlist box is shown, refers to sdaThis will delete Debian GNU/Linx (4.0) and install Ubuntu-Netbook-Remix 9.10o Use the largest continuous free spaceo Specify partitions manually (advanced)bar with slider for free space, /dev/ddb1, and Ubuntu-Netbook-Remix 9.10And then nothing else - no forward button, or anything like that.
View 2 Replies
View Related
Mar 25, 2010
ok i have a trouble and the disk load... language and when i select apear statusbar but them nothing... i have a MSI DKA790GX, Athlon X2 5000+ BE, 2GB DDR(800), 500GB HDD, Ati Radeon 4870
View 4 Replies
View Related
Jan 21, 2016
Earlier , centos 6.6 & kvm was installed & over it debian 7.6 was installed & it was running fine.
Due to some issue we had to format the server , now we are able to install centos 6.6 & kvm but not debian 7.6. We are installing via media, from where can i download debian 7.6 iso.
we are installing it on hp dl 360 g9 server, we are able to format the disk inside the kvm & after when it start copy the operating system it throws error & error is Installation Setup failed, try run the failing item from the menu, I have tried the following
1. Replace the media & checked same error
2. Realter the partion & checked same error
3. Tried to install with guided partion & checked same error.
View 8 Replies
View Related
Apr 5, 2010
I'm new to Fedora (not linux) and I was wondering how I would go about doing a minimal install of fedora 12. I downloaded the live disc but it doesn't give me installation options (I'm new to minimal installs so I don't know that much). I also searched all over looking for a fedora minimal install iso, something similar to the ubuntu minimal install iso that is only 12mb.
View 14 Replies
View Related
Jul 20, 2011
I have unstable installed and wanting to play around with gnome 3 but I am having trouble. When I go to synaptic or terminal and try and install I can not find gnome 3. Here is my sources.list
[Code]...
View 13 Replies
View Related
Feb 28, 2009
I was able to install Fedora 10 from the Live KDE CD, however I can't boot it.
I placed it on /dev/hda4 of an IDE disk, while on /dev/hda1 I have a RedHat 9 Linux, /home is on /dev/hda2 and the swap is on /dev/hda3. I'm not sure if RedHat 9 and Fedora 10 can coexist on the same HD.
There's an option in the Live KDE CD boot install, which allows one to select:
boot from hard disk:
Do you know what to type in in order to direct Fedora to boot from /dev/hda4 (who may be /dev/sda4 as seen by Fedora)?
P.S. For the time being, I want to forget about Grub or LILO and see if I can boot it this way first. I have LILO working, it boots Windows from a separate disk and RedHat 9 from /dev/hda1.
View 3 Replies
View Related
Jan 12, 2009
Installing new Intel server S5000VSA (Sapello) motherboard with RAID 1. Downloaded F10 32 bit DVD and run install. Everything works fine and select Samba and all that. Install completes but on reboot get a blank screen.
I know with Windows one has to load the RAID driver off the Intel driver CD, so guess that is the problem. But how do I do this in Fedora? Question: How do I get to select the Intel RAID driver in the install process? There does not seem to be any place to stop and make this selection. I tried selecting the Red Hat and Suze installs on the Intel configuration assistant but it then reboots and that is it. In Windows it would ask to insert the Intel driver CD but that does not happen. So I am stuck. I loaded Fedora some 3 year ago and like it but then it was not on a RAID setup. I created a VMWare install on my desktop and did the same install options and it works. So the DVD seems fine.
View 3 Replies
View Related
Jan 30, 2011
I have tried both DVD and CD (both are MD5-checked) of both Lenny 5.0.8 and Squeeze RC on my HP DV7-3074CA. (a.k.a 3085DX)When I choose a graphic install, it just hangs after loading the initial files.When I choose the normal install, It gives the following error:
[1.383207] ACPI: EC: Input buffer is not empty, aborting transaction.
Is there a boot command I can input to override this? I tried removing the battery slot, but the only difference is that that message does not appear, but the setup hangs anyway.
UPDATING:Tried "pci=noacpi" but that did lead to a kernel panic.[1.547564] Kernel panic - not syncing: Attempted to kill init!
View 7 Replies
View Related
Mar 15, 2010
When I attempt to install the OS on my PC, the install software crashes immediately after I select US-English on the first screen. I'm copying the entire error report below. My system is configured as follows: Gigabyte P35-DS3R motherboard with 4G RAM. (FYI, I'm using the 32-bit LiveCD just because I may need a 32-bit OS for some purposes. I know this means I may not be able to use all of my RAM.) There are 3 500G hard drives connected to the computer. /dev/sda and /dev/sdb are RAID-1 mirrors via the on-motherboard ICH9R RAID chip. The logical partitions show up as /dev/dm-1, /dev/dm-2, /dev/dm-3, /dev/dm-4, and /dev/dm-5. When I type `fdisk -l`, I can see sda, sdb, and dm-* all separately. (I can provide the full output of `fdisk` if anybody wants to see it.)
/dev/sdc is a standalone drive without RAID.
I want to install Fedora on /dev/dm-2 with swap on /dev/dm-5. Currently, /dev/dm-1 and /dev/sdc2 each contain a separate installation of WinXP. I suspect the problem is with detecting RAID, thus I have deleted most of the error report that doesn't seem to concern storage detection.
[code]....
View 4 Replies
View Related
Jan 1, 2011
Have anyone try the latest Debian 5 iso CD? I got installation problem. It is the select and install software stage. If I select only
Code:
[*]Desktop Environment[*]Standard
I want to select web server, email server, the installation fail.
View 4 Replies
View Related
Oct 30, 2010
On my system (Ubuntu 9.x -> 10.x) I have always had the problem of not being able to select the edges of a window in order to change the window size. It seems that the 'hot' zone, which defines the window border selection area, is only 1 pixel wide. I find it very difficult to position the mouse pointer over this zone. Even if I am successful (which usually takes more than 20 tries), as soon as I begin to depress the mouse button, the merest movement causes the pointer to move off the 'hot' zone - and selection fails. The only work-around I have found is to select a corner point of a window -which seems much less sensitive - and then drag the window border in either a vertical or horizontal direction, rather than diagonally. But this is counter-intuitive and unsatisfactory.
View 9 Replies
View Related
Jun 30, 2011
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies
View Related
Jul 25, 2011
I just updated my system, not sure which package may have caused this, here are the outputs:
Mutter:
Code:
(mutter:4637): Clutter-CRITICAL **: Unable to initialize Clutter: Unable to select the newly created GLX context
Window manager error: Unable to initialize Clutter.
Compiz:
[Code]...
View 3 Replies
View Related
May 27, 2011
I am attempting to put a SystemRecoveryCD ISO onto a USB drive by using a shell script that is bundled with the ISO file (usb_inst.sh). When I run this script, I am presenting with a dialog box with a blue background (see attachment) with two options: <OK> and <Cancel>. I am able to switch between the options by using the arrow keys and Tab, but if I try to select an option by pressing Enter, O, or C, a new terminal line appears (as in the attachment), preventing me from selecting anything in the dialog. I feel like I'm not doing something extremely obvious;
View 3 Replies
View Related
Apr 25, 2010
I'm using Karmic with Grub 2 (1.97b4) I have this strange problem going on and believe it might be a bug so if no resolution will file it on Launchpad. Whats happening is this:when I installed Karmic fresh a couple of months ago I never did anything with customising the Grub splash screen. I just stuck with the boring black/white and if I wanted to got to Memtest or my little used Win XP partition would just hit the down arrow when the Grub Splash appeared and go there.A couple of days ago I decided to add some custom colors to the splash screen as outlined in the Grub 2 documentation. I did this to both my desktop (Acer Aspire L100) and my laptop (Compaq) Everything looks fine except for one thing. On the desktop if I hit the down arrow (or any other key) it immediately boots the first option which of course is Karmic. It should have paused the timer and allowed me to scroll down. What this means is I can only boot Karmic at this time. This is only happening on the desktop!
View 1 Replies
View Related
Mar 26, 2009
I'm installing FC-686 onto a Dell 6300 server with several drives, one 300+gig and about 5 9gig drives. The install disk loads fine but when I select install to HD it tells me that there is no device to install to. Obviously doesn't see the HDs. I have used the internal program to format the HDs, I think I selected RAID 3. I wanted to use all the HD space as my data is not critical requiring RAID 5. Unless someone convinces me otherwise. I did this also because I wanted to maximize disk space. What else to do with 9 gig drives?
View 4 Replies
View Related
Jan 6, 2010
I'm currently trying to use preseed to build an ubuntu server box over the network. I'm using the netboot.tar.gz from the karmic main mirror. By default it installs the standard kernel (linux-2.6.31-16-generic), and I want to use the server kernel (the metapackage linux-server which should install linux-image-2.6.31-16-server). I'm using a minimal build:
Code:
tasksel tasksel/first multiselect minimal As far as I can see all the other preseed settings are close to defaults. I've tried setting both of the following lines (separately and together) with no effect:
Code:
d-i base-installer/kernel/image string linux-server
d-i base-installer/kernel/override-image string linux-server
Once the machine is built, if I run:
[Code]...
View 3 Replies
View Related
May 21, 2011
I have done a fresh install of Ubuntu 11.04 on my oem intel machine.After the installation,the screen resolution is stuck at 800x600.I am unable to select a higher screen resolution.
View 6 Replies
View Related
Jul 26, 2010
Am carrying out installation of CentOS-5.5 on a Sun fire X2270 server using PXE. The installation starts well but on getting to the keyboard type the installation halts. I have plugged in a USB keyboard unfortunately, am unable to select the keyboard type even on reboot as the keyboard is non-responsive.
View 2 Replies
View Related
Apr 21, 2010
I switched our main fileserver to new hardware running RHEL 4 Update 8 yesterday. Post the switch my users are finding that the text in the boxes on taskbars at the bottom of their desktop screens no longer truncates but spills over onto that of other boxes, making them extremely hard to decipher.
All our desktops are RHEL 4.8 too. Also, I'm only able to select PNGs as desktop wallpaper - JPEG backgrounds just appear as plain white when selected(!) Has anyone seen this before and knows of a fix?
View 10 Replies
View Related
Aug 22, 2011
I have recently zypper dupped to opensuse 11.4 from 11.3. My only problem is I am unable to access my address book when I click <select> when sending a new message; only recent addresses show in the window that pops up. Even if I select <all> in the list of choices, only <recent addresses> show up. In the useful tips that appear upon opening K-mail it states that if I click on < folders> then < Mailing list management> I will be able to select and manage all of my address books. But when I click on <folders> the <mailing list management> is faded telling me that it is not enabled. My question is what must I do to enable the mailing list management to be enabled? I have enabled mailman with no help.
View 1 Replies
View Related
