I am trying to boot Fedora15 using a USB stick. It fails to boot properly It works fine when I boot Fedora 14 using the same usb stick. I've attached some screenshots. Trying to run it on a Lenovo T500 2081CTO with an ATI graphics card.
View 2 Replies
I downloaded the Fedora Live USB creator and the program consistently fails to load properly onto the flash drive. I have also downloaded the DVD iso program from this site and get only errors when trying to boot with an ISO burner? I am attempting to load the program on Sun Virtual Box, which is like VMare's Workstation, and the prompt consistently reads error when attempting to install. Also the progress bar on the Live USB loader never stops even after it the cmd prompt says it is complete.
View 1 Replies View RelatedI just received a new workstation from a vendor with Fedora14 supposedly installed in it. The problem is, it does not boot up properly. Although I've contacted them to resolve the problem, I thought I'd ask here to see if I can expedite things. Bottom line, the machine goes through the boot-up process, but only so far. Rather than getting to the log-in screen, I only see a white bar at the bottom of the screen, with "Fedora14" adjacent to it. Is there a way that I can get into the set of configuration menus for setting up the OS? They neglected to include the source disks with the system, if that is what is required.
View 1 Replies View RelatedI want to try Debian on my Asus Eee netbook and I'm trying to follow the instructions in URL... But just copying the ISO file to the USB drive then trying to boot from it doesn't seem to work. I just get "Missing operating system".
The Eee can use an external optical drive as well but that failed also. I'm sure I need to do more to prepare the USB drive or CD? Can I prepare the USB Drive or CD on my Windows system, and make it boot on the netbook (which has another Linux distro on it now)?
I got a new laptop, this is the one: [URL] and decided that I wanted to go with Fedora instead of Ubuntu with this computer. The laptop runs win 7 64 bit so I'm trying to go with Fedora 64 but it will not boot. I first installed Fedora 12 64 bit from the DVD install and it would go to grub fine but when I boot the fedora os It just stops in the middle of the boot script. When it stops, the last 4 lines are:
kernel_init=0x1fd/0x257
child_rip+0xa/0x20
? kernel_init+0x0/0x257
? child_rip+0x0/x20
I hadn't messed with it for a few weeks and yesterday I saw that 13 was out, so I downloaded and burnt the Fedora 13 64 bit CD. I popped it in, booted the computer and it did the same crap. It didn't stop at the same line but it was around a line with:
? kernel_init
So I guess the kernel isn't loading properly or something. Do ya'll think I would be better off using the 32 bit?
After editing gdm and reming out line "auth required pam_suceed....................!=root quiet" the server boots but hang with the login screen. other highlighed but all options greyed out.
Boots OK in text mode and operates OK.
After restoring original gdm file problem still persists.
Anyone succeed with f11 install on netbook (/ on SDHC, /boot on primary SSD/HDD drive)?
My netbook (AAO) works just fine with f11 Live-on-usb-sick (created with live-usb-creator), but fails to boot fedora from SDHC.
I have sevral older machines that cannot boot from usb. Until now I have installed fedora using the provided boot.iso on a CD and an external USB dvd drive with the full install DVD.
With Fedora 11, this fails. It gets as far as "finding storage devices" and fails, telling me that an unhandled exception has occured. It offers to save the details, but freezes looking for a suitable location. I have no such problems with the same DVD/external rw drive on systems that can boot directly from usb.
I started preupgrade with a 200M /boot partition 50% full. According to the instructions, it is supposed to give me the option of downloading the stage2 installer later. It doesn't, and crashes horribly (see below).This worked from FC12 to FC13. Reparititioning will take a day because the FC12 kindly made the root file system LVM and nothing will resize it. (I tried this with FC11 -> 12 and ended up losing everything and rebuilding the 1T disk).
Code:
$ sudo preupgrade
Loaded plugins: blacklist, whiteout
[code]....
I've created an LiveUSB disk with the USBcreator method in Windows 7.Now the the image is copied succesfully and the USB key is bootable.However when the boot window popsup and I select the verify & boot option, a graphical loading window comes up and right after that the system halts with the error message "Sleeping forever".What am I doing wrong? Or what is Fedora doing wrong with their LiveCD to USB media?I've did a forum search and the exact same issue is described in this thread[URL]
View 5 Replies View RelatedI have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
Has anybody noticed that delete in Ubuntu 10.10 is only compatible with Ubuntu. E.g. I have a usb stick with 2 movies on it. Delete them using ubuntu's Gui just right clicking files and move to thrash so the drive looks empty. then i physically remove the drive and put it into a windows xp machine and all the files are still on the stick just put into a folder called thrash.
I also reformatted the usb stick Fat32 inside ubuntu and when i put it into the windows machine the file names were still there. (The movies were currupt and unplayable in Windows.)But still its very strange I suppose i'll just have to Blow up my usb if i ever need to destroy the data on it.. Just let me know if this has happened to you guys before. (I had Bootable Backtrack 3 on one of my old usb's that I gave to a work colleague.
I know that deleting and reformatting only deletes the indexing info for the OS but i always thought that deleted files couldn't be accessed by the average computer user.
I have a server that NFS exports the /home directory out to other computers. On the desktop they all work great, but on a wireless laptop, this is where the problem occurs. The wireless enables after the person logs in, rendering the NFS export /home useless on the laptops.Is there anyway to have the wireless enable correctly on the boot so that NFS can mount properly at boot also?I'm using Fedora 11 (32bit) with a wireless router that has a security of WPA-PSK [TKIP] + WPA2-PSK [AES]. I could switch to some of the older versions if necessary to get this working.
View 5 Replies View RelatedI am trying to get the Asus "My Cinema-U3100 Mini plus" DVB-T USB stick to work on my lucid 32bit with 2.6.32-27 kernel - with no great success so far. And this despite searching through forums and following the instructions given on [URL].
The USBID is in fact
Code:
ID 0b05:1779 ASUSTek Computer, Inc.
Which is exactly the one shown in the list of supported devices on LinuxTV. I have implemented all modifications and corrections to the source files as outlined in the above LinuxTVWiki instructions.
I also added the boot option
Code:
usbhid.quirks=0x0b05:0x1779:0x0004
to grub2 in order to overcome the (initial) problem of the tuner being recognised as a HID device.
My dmesg output after plugging in the device now shows
Code:
Jan 27 17:44:50 jens-laptop kernel: [ 1086.358488] usb 2-5: new high speed USB device using ehci_hcd and address 6
Jan 27 17:44:50 jens-laptop kernel: [ 1086.495359] usb 2-5: configuration #1 chosen from 1 choice
When I try to compile the af903x driver using
Code:
sudo make
The response on the screen is
Code:
make -C /lib/modules/2.6.32-27-generic/build SUBDIRS=/home/jens/Desktop/Linux_PC_AF9035_Afatech_2008.12.17/Linux-32bit_AF9035_20081217/AF903x_SRC modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-27-generic'
CC [M] /home/jens/Desktop/Linux_PC_AF9035_Afatech_2008.12.17/Linux-32bit_AF9035_20081217/AF903x_SRC/af903x-core.o
In file included from /home/jens/Desktop/Linux_PC_AF9035_Afatech_2008.12.17/Linux-32bit_AF9035_20081217/AF903x_SRC/type.h:4, .....
make: *** [default] Error 2
My knowledge is limited and I have no idea why I am getting all these warnings and finally the error message. Also, is there a way to tell when (or if at all) driver support for this device will be implemented in the Linux kernel?
I'm running into this issue after installing Fedora Core 11 off DVD. Anaconda install the first part of the installation, then after reboot it goes into run level 3 (I think, where you have to login as root) I noticed that it said xserver failed to load before it actually boots Anaconda.
Maybe I should pull a graphic's card? I have logged in as root after the base install and did a lspci, and you can see the two Nvidia Quadro FX1700's and you can tell it is an intel board with the Intel Corp 6311ESB/6321ESB PCI Express ports. Also you can navigate through the linux directories via ls \. I tried YUM to find/install the graphics drivers but it says something about metadata not being configured. I checked the IP address with ifconfig and had to manually assign an ip.
I'm trying to install Ubuntu 9.10 from USB stick. I used System>Admin>USB Start up Disk Creator and a 9.10 .ISO version to create the bootable USB stick.
When I plug my USB key into my computer, my computer doesn't boot from it. I tried on several other computers and none of them boot from my USB key. The bios settings on all my computers boot from removable media first.
I repeated the above steps with a different USB key and I still can't boot from the USB key. When I browse the USB key directories, I can see all the necessary files to install ubuntu.
Last year, I didn't have trouble installing ubuntu 9.04 from USB key. Not sure what I'm doing wrong this time.
Can anyone tell me how to trouble shoot this problem?
I have downloaded the "debian-7.8.0-amd64-netinst.iso" from the official website. I then used dd to create a bootable usb stick. The usb stick is detected by the HP Proliant server but it does not boot from it, even if no other OS is present (so boot order is not the problem, and even if it was, i checked the bios). I tried the original iso in a Virtualbox environment and it worked without a problem.
I then tried creating the usb stick in Windows using "Unetbootin" and "LinuxLive Creator". When I insert the stick into the HP this time it boots from it and all is good. I can not use this approach though, because I want to automate the installation until I can SSH onto the server. But somehow unetbootin and linuxlivecreator overwrite my modified debian isos preseed file (which also works perfectly on a Virtualmachine).I also used dd to create a Ubuntu usb stick and that works without a problem on the HP Proliant.
I burned a live dvdrw with the hybrid live cd of debian 8.1 gnome and installed Debian onto the 32gb usb stick like this
8gb for /
22 for /home
2gb for swap
after chrooting into the usb stick with the live dvd-rw and installing grub2 there again cause the installation couldn't do it without chrooting first.. I wasn't able to boot from the laptop I installed Debian with but I could on my Desktop PC.
I wondered if you needed a copy of my grub.conf? so here is the pastebinnet of /boot/grub/grug.conf
[URL] ...
I used unetbootin (on another machine) to put the ubuntu 10.04 minimal amd64 .iso onto a usb stick. I used it to install a minimal system on a new 64-bit laptop (dual booting with Windows 7). Now, when I turn on the machine I get my choice of OS. When I pick Ubuntu, I get a blinking cursor, the harddrive is accessed. Then the cursor disappears, the harddrive is quiet, and nothing else happens.
View 9 Replies View RelatedAfter several attempts at installing Ubuntu 10.10 on a Samsung N150 laptop/netbook, I have finally succeeded, but it won't boot without the installation USB drive being plugged in. Trying to boot it without the USB thumb drive it just stops at a black screen and does nothing.
With the USB drive in, it doesn't actually load up the installer, as you would expect, but boots normally into Ubuntu. Once booted, you can remove the drive and it runs fine without it. When you plug it in, it sees it as /dev/sdb, and the only hard drive is also seen as /dev/sdb. So it never mounts it. It can mount any other USB thumb drive normally.
I going to re-install Fedora 14 and several other OS-es on a multi boot system.
Now - my normal procedure is to install fedora 14 last and use the grub boot loader to load the other OS. As I use a hard disk to regularly install an experimental OS I keep my grub boot on a back-up floppy. The installation is done (as root) in this way:
modprobe floppy
fdformat /dev/fd0
mke2fs /dev/fd0
mount -t ext2 /dev/fd0 /mnt/floppy
grub-install --root-directory=/mnt/floppy '(fd0)'
cp /boot/grub/grub.conf /mnt/floppy/boot/grub/grub.conf
umount /mnt/floppy
This works great. If your mbr is overwritten by another OS you can use the boot floppy to get into Fedora - no problem.
However - my new system has no longer a floppy disk drive (no connection the motherboard). I wonder if can use a USB stick in stead of a floppy to boot Fedora if my mbr is overwritten. I only have no clue how to do that. The above procedure can obviously not be used, because a stick is no floppy.
I am NOT asking for a full Fedora on the stick!!! I only want t use the stick to boot my hard drive based Fedora if the mbr is overwritten.
I need to tidy up how my PC boots up.
Current sitch:
Windows XP Pro installed to main C drive.
Ubuntu 9.04 installed to an 80Gb USB drive which draws its power from the PC. Switching PC on brings up GRUB menu where I can choose between Ubuntu or Windows. For whatever reason, Ubuntu 9.04 will not boot properly, only getting me as far as the login screen. When I try to type in my username, the screen does not respond - I cannot type anything into the login box. If the USB drive is not connected to the PC when I switch it on, then there is no way to boot into Windows.
I need to change this so that I can boot into Windows without the USB Hard Drive being connected to the PC. The GRUB thing is obviously on the USB hard drive, so I need to keep it connected to the PC just to boot it up. I'm concerned that if I take that drive and try to upgarde it to 9.10, I will mess up the boot sequence etc., and then won't be able to boot up the PC into either Windows or Ubuntu.
I have a USB stick with a mechanical write protection (a small switch that disables writing on the stick). I have installed Ubuntu 10.04.1 on this device usung the startup drive creator. If the switch is in the position that allows writing, Ubuntu boots as expected. But if I switch to write protection, I only see a blinking cursur. Because it is a live system on the stick I expected that it should work as well, because nothing should be written to the stick. Does anyone have an idea why it behaves like this and how I can change it?
View 9 Replies View RelatedI want to install ubuntu 10.10 on my old laptop. I try to do this by usb stick, i came to the blue window boot device, there are 4 options to choose: Hard disk, cd-rom/dvd, floppy disk and lan boot. I tried all of them, but nothing happend.
View 5 Replies View RelatedBefore: I had 2 os's ubuntu and windows installed on my system. Recently, I decided to install ubuntu to a flash drive. All went well except grub was not installed to the flash drive, but appended the existing grub setup on my hard drive.
Now: Even if I set the default system in grub as windows, or the original ubuntu install, my system will not boot unless the usb stick is plugged in. I get message. Error: grub rescue: My ideal solution: To stop grub searching for my flashdrive before loading the boot menu, and if possible to write grub to the flash stick.
OpenSuse 11.4 32bit KDE 4.6.0
When I plug in my 8 GB SanDisk Cruzer USB stick into my desktop box, the KDE Device Notifier fails to recognize it. It will recognize every other USB stick. "fsck" reports no errors. I can mount it manually. I can read and write to it. The Device Notifier on my netbook recognizes it. So does another desktop box. By the way this started recently so I suspect some software update.
My old computer started randomly rebooting so I went out yesterday and bought a new one. It's a standard Intel 64 architecture with 2gb ram etc.The old computer was running Lenny however I'm happy to upgrade, so I just went to the main Debian download site and downloaded:debian-6.0.1a-ia64.netinst.iso (this didn't work, apparently ia64 is for itanium and my machine is definitely not that), so I downloaded: debian-6.0.1a-amd64-netinst.iso, burnt the CD and ran the install. First time through I had a power failure.
Second time through (a complete fresh start - new partition and everything) it went all the way through to completion and reboot.Clicked 'Continue' to reboot and the machine reset as it would normally and the Grub loader started okay, prompted for the "Debian amd64" standard boot image, selected that and the first 6 lines appeared normal, then the messages wizzed by so fast that only superman could read them. Then they stop - here is some of the content...
[3.816673] Kernel panic - not syncing: Attempted to killl init!
Call trace:
get_empty_filp
panic
[code].....
Running it again I get similar stack stuff but it's a different place: [3.541816], [3.427502] And sometimes if I wait for a minute or two it will continue on further but appear to crash again. Hardware details (everything is onboard - no added cards):
G41M-S3
Intel G41 + ICH7 chipsets
CPU: LGA 775 for Intel Core 2 Extreme
[code]......
Is the amd64 the wrong image? Should I try i386? Is it a blip and I should just rerun the entire install again?
Cannot install Ubuntu10.10 from usb stick to Vista PC for dual boot-installer crashes.Launchpad report bug not allowing me to report new bug either!I have been trying to install 10.10 ALL day unsuccessfully. Unhappy about unsuccessful outcome!
View 9 Replies View RelatedI have an hp pavilion 15-b106ed with UEFI. I disabled secure boot and installed debian jessie form the CD1 iso (RC1 installer) burned to an USB key. Installation went smoothly, but after rebooting I get grub's terminal-like screen saying:
"GNU GRUB version 2.02 beta2-9ubuntu1. Minimal BASH-like line editing is supported... etc"
The problem is that as soon as I turn on the computer that grub screen shows up and I can't boot from USB anymore nor
access the BIOS settings, no matter how fast I press F9, F10 and such. I guess I have to tell him to boot from the USB using the grub terminal...
