Debian Installation :: HP Proliant N40L Does Not Boot Into USB Stick
Mar 14, 2015
I have downloaded the "debian-7.8.0-amd64-netinst.iso" from the official website. I then used dd to create a bootable usb stick. The usb stick is detected by the HP Proliant server but it does not boot from it, even if no other OS is present (so boot order is not the problem, and even if it was, i checked the bios). I tried the original iso in a Virtualbox environment and it worked without a problem.
I then tried creating the usb stick in Windows using "Unetbootin" and "LinuxLive Creator". When I insert the stick into the HP this time it boots from it and all is good. I can not use this approach though, because I want to automate the installation until I can SSH onto the server. But somehow unetbootin and linuxlivecreator overwrite my modified debian isos preseed file (which also works perfectly on a Virtualmachine).I also used dd to create a Ubuntu usb stick and that works without a problem on the HP Proliant.
I recently purchased HP Proliant Microserver with the idea of having it as a home server running Amahi. I added one 2TB hard disk to the already installed 250 GB drive. The Microserver has no cd/dvd drive so I created a bootable pen drive using LiveUSB Creator tool from Fedora 14 installation DVD iso image. However, I ran into problems in the very first phase though I struggled hard, juggling i386, x64, Live images...
Now, for i386 Fedora: The machine successfully boots from the pen drive but after selecting language and keyboard, the installer does not see the installation image - or even the pen drive at all - saying "No driver found". Then, I can only open "Select Device Driver to Load" (screenshot) where I can only see whole bunch of drivers I have no idea which of to select. I tried "USB mass storage driver for Linux", nothing happened, I'm returned back to "No driver found". Haven't found the "HP NC107i PCI-Express Gigabit Ethernet Server Adapter" driver in the list...
x64 Fedora: Same result, though x64 at least recognizes the HDDs that are already in the box (screenshot) so I can try to use image files unpacked on the second one (ext4 formatted). Then, the installation proceeds till the point of formatting the installation drive when it suddenly "Cannot find ISO 9660 image" (screenshot) and I cannot but Exit.
Live x64 image: I tried the Live bootable image from the same pen drive - it booted and installed correctly and at the first glance the system was working fine, connecting to the internet, downloading updates etc. However, this is not my option because I didn't have the option to add additional Repository during the installation from Live image (as it is in this guide, search the page for "Add the Amahi repository"). why the installation is not working in my setup?
I burned a live dvdrw with the hybrid live cd of debian 8.1 gnome and installed Debian onto the 32gb usb stick like this
8gb for / 22 for /home 2gb for swap
after chrooting into the usb stick with the live dvd-rw and installing grub2 there again cause the installation couldn't do it without chrooting first.. I wasn't able to boot from the laptop I installed Debian with but I could on my Desktop PC.
I wondered if you needed a copy of my grub.conf? so here is the pastebinnet of /boot/grub/grug.conf
I have a HP ProLiant DL380 server and I am trying to install Debian on it.
I had an error that said dhcp configuration failed at the base installation and Debian found my NICs but asked for driver.
I've Googled it and found out that I need to install required Broadcom NetExtreme NIC drivers.
There are images that 3rd people have created but I don't want to use them as it will be a server.
Another way to install them is to download .deb package and install it from a removable media when asked.
So I went ahead and did an expert install mode and choosed adding packages from a media so an option appeared for me to install stuff from removable media now.
Each time I choose it, my flash drive's lights are blinking but then I am getting an error says this package can not be installed are you sure to install a non signed package.
I say yes at that stage but I still can't install and then it says this is probably happening because of kernel version miss match.
I downloaded latest stable copy of Debian and also downloaded the stable squeeze copy of the driver from official Debian site too. [url]
Is this a kernel mismatch between my Deb. version and the driver?
And after many try my server started hanging at detecting network hardware stage, how can I deal with this?
Also finally I started to get this...
[url]
Is this happening because I am using wrong architecture CD?
I have i386 image and my server has 2 x Pentium 3 processor.
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement 147 GB for Windows, C: 85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
I Installed Debian on my laptop using a USB-stick. After the installation, everything seemed ok, though it didn't boot anything, it was just waiting with a flashing marker. I put in the USB-stick and rebooted the system and it worked for some reason, GRUB started this time. Now i've had the system like this for a couple of weeks, I have to put in my USB-stick in order to be able to get GRUB to start, but can remove the USB-stick when the OS has started.
The only thing I could think of, was that GRUB was installed into the USB-stick. So I removed the USB-stick when Debian was started and and reinstalled GRUB using aptitude. Still didn't work. What could be wrong?
I'm trying to install Ubuntu 9.10 from USB stick. I used System>Admin>USB Start up Disk Creator and a 9.10 .ISO version to create the bootable USB stick.
When I plug my USB key into my computer, my computer doesn't boot from it. I tried on several other computers and none of them boot from my USB key. The bios settings on all my computers boot from removable media first.
I repeated the above steps with a different USB key and I still can't boot from the USB key. When I browse the USB key directories, I can see all the necessary files to install ubuntu.
Last year, I didn't have trouble installing ubuntu 9.04 from USB key. Not sure what I'm doing wrong this time.
Can anyone tell me how to trouble shoot this problem?
I have a computer missing a HDD and I would like to be able to use it until I have bought a new HDD. I have seen it is possible to install the contents of a LiveCD to a usb stick, but is it possible to install a normal debian system to a usb stick and make it bootable? Example: can I make BIOS find my usb stick and make it the master HDD and then install debian on it by booting with an installation CD?
The advantages would be the possibility to modify the operating system and storing files, which is impossible when using a liveCD.
I am trying to boot Fedora15 using a USB stick. It fails to boot properly It works fine when I boot Fedora 14 using the same usb stick. I've attached some screenshots. Trying to run it on a Lenovo T500 2081CTO with an ATI graphics card.
I used unetbootin (on another machine) to put the ubuntu 10.04 minimal amd64 .iso onto a usb stick. I used it to install a minimal system on a new 64-bit laptop (dual booting with Windows 7). Now, when I turn on the machine I get my choice of OS. When I pick Ubuntu, I get a blinking cursor, the harddrive is accessed. Then the cursor disappears, the harddrive is quiet, and nothing else happens.
After several attempts at installing Ubuntu 10.10 on a Samsung N150 laptop/netbook, I have finally succeeded, but it won't boot without the installation USB drive being plugged in. Trying to boot it without the USB thumb drive it just stops at a black screen and does nothing.
With the USB drive in, it doesn't actually load up the installer, as you would expect, but boots normally into Ubuntu. Once booted, you can remove the drive and it runs fine without it. When you plug it in, it sees it as /dev/sdb, and the only hard drive is also seen as /dev/sdb. So it never mounts it. It can mount any other USB thumb drive normally.
I tried to build a bootable USB stick using Code: Select alldd if=~/Desktop/linux/debian-8.0.0-i386-xfce-CD-1.img of=/dev/disk1 bs=1m as mentioned here: URL... but this does not work on my MacBook 3.1, late 2007 model (yes, I am using rEFIt and my CD drive is dead). The error message upon trying to boot from the USB stick using rEFIt says something like 'unable to load bootia32.efi'.
The workaround: I took the "bootX64.efi" from here:URL... on the USB drive and renamed it as "boot.efi".I copied the "debian-8.0.0-i386-xfce-CD-1.iso" to "/efi/boot" on the USB drive and renamed it as "boot.iso".So now my USB stick has 2 files only: "/efi/boot/boot.efi" and "/efi/boot/boot.iso" and nothing else.Now I was able to boot from the USB stick get into a GRUB prompt.
The installer starts fine and I choose my locale, keyboard etc. until it starts to scan for the CD drive and I face...The error message says that a CD was not found (as expected).I fired up the shell offered by the installer and mounted the USB stick to "/mnt/usb" like this:
Code: Select allmount /dev/hdb1 /mnt/usb
It works and I can see my ISO file in "/mnt/usb/efi/boot/boot.iso".I tried to mount the ISO image to "/dev/cdrom": Code: Select allmount -o loop -t iso9660 /mnt/usb/efi/boot/boot.iso /dev/cdrom
waited for a while and killed (control + c) the process and found that my "/dev" folder has been flooded with files named like the string "loop" followed by some digits (loop1245, loop8766 etc.).Can the Debian installer be somehow tricked into believing that the ISO file on the USB stick is the mounted CD?
I cannot get an install past looking for CD on any of the iso's I've tried. I have burned many iso's of other distributions onto a USB Stick and installed them so easily. Yet when it comes to Debian it is always a no go with me.
I think that Debian being up with the times would or should know most people that burn iso's just use an USB Stick it is easier and convenient. Therefore, they'd write the scripts to use them too without the "iso" thinking it is an CD/DVD that it is needing CD / DVD drivers to finish an install else abort.
I have a USB stick with a mechanical write protection (a small switch that disables writing on the stick). I have installed Ubuntu 10.04.1 on this device usung the startup drive creator. If the switch is in the position that allows writing, Ubuntu boots as expected. But if I switch to write protection, I only see a blinking cursur. Because it is a live system on the stick I expected that it should work as well, because nothing should be written to the stick. Does anyone have an idea why it behaves like this and how I can change it?
I want to install ubuntu 10.10 on my old laptop. I try to do this by usb stick, i came to the blue window boot device, there are 4 options to choose: Hard disk, cd-rom/dvd, floppy disk and lan boot. I tried all of them, but nothing happend.
Before: I had 2 os's ubuntu and windows installed on my system. Recently, I decided to install ubuntu to a flash drive. All went well except grub was not installed to the flash drive, but appended the existing grub setup on my hard drive.
Now: Even if I set the default system in grub as windows, or the original ubuntu install, my system will not boot unless the usb stick is plugged in. I get message. Error: grub rescue: My ideal solution: To stop grub searching for my flashdrive before loading the boot menu, and if possible to write grub to the flash stick.
What I have done so far with Debian: I used dd in Ubuntu Lucid to put the Debian live GDE version onto a USB stick, and I successfully booted my Toshiba Mini with it in under a minute! That even blows Easy Peasy away! I love the simplicity of the DE. For now I want to get the GDE version of Debain installed to a USB stick. (That is, I will use the live USB that I created to direct the installation to a USB stick that is plugged into the computer).
What I think that I know: I was successful to use a live Ubuntu Lucid USB to install Ubuntu Lucid to both a USB stick and an SDHC card, and that is what I am running right now. I have encountered issues with this process, such as apparently the /dev/sdx that was recognized during install being different when I try to boot the new stick, and I only happen to eventually mysteriously boot after, say, trying a different USB port. My main concern is a functional internet connection, otherwise I will be helpless when I try to confront any other kind of Debian problem, and of course I will soon want to begin installing packages. In Ubuntu Lucid my wireless card was nonfunctional, and I spent two weeks working on finding a "solution", which was something I believe called a Personal Package Archive, my first and only use of such a thing.
As far as I understand the first command, as with much of what I do with GNU/Linux, I must simply trust the benevolence of the package provider that their code will not ruin my hardware. The firmware issue does disburb me a bit, and it seems that Toshiba and Realtek or whoever is responsible would like to require me to use Windows in order to configure my wireless card. (That seems like it should be illegal.) Thank god I did manage to find a completely GNU solution, and thank the community for always being there trying to provide solutions like this.
So, appologizing for that overly elaborate introduction: Are there any pitfalls that I should avoid in the process of installing from the live GDE Debian USB to another USB stick on my Toshiba Mini, or if this is even possible in Debian? Is there a more appropriate solution to get my wireless card to work (instead of using the PPA mentioned above)? For instance, the wireless light never changes from amber to green (which I guess is what should indicate that the card is connected or not?), even though I am obviously connected to the interent (here I am). How do I force the installation to recognize my USB more primitively/reliably than as a /dev/sdx file (which seems to be quite dynamicly allocated from one boot to the next)?
Cannot install Ubuntu10.10 from usb stick to Vista PC for dual boot-installer crashes.Launchpad report bug not allowing me to report new bug either!I have been trying to install 10.10 ALL day unsuccessfully. Unhappy about unsuccessful outcome!
I have been trying for close to 7 hours now to create a working encrypted bootable usb key for debian now.
I start by running the debian installation dvd (1 of 3. I downloaded and burnt all three ISO's that I found here: [URL] .... (2015-06-06 17:33) to disk), and when I get to the partitioning part, I cannot get an encrypted volume that will hold the root filesystem.
Here is what I have tried:
I have tried the Guided partitioning option to use the entire disk and set up encrypted LVM, to no avail.
I am left with a primary boot partition of 254.8 MB, at ext2 with /boot mountpoint on it, and a logical partition of 15.8 GB, with crypto as it's file system that says it's "not active". This bit here seems to be a running theme as I keep coming back to this set up, (give or take some space arrangement). From what I've read and seen, I should be seeing an Encrypted Volume container similar to LVM, but called an "Encrypted Container" that I can create additional partitions in like / and /home, and what have you.
And I can't "activate" the partition either. I have tried both the Configure Logical Volume Manager, which changed the partition to an LVM partition that dosn't encrypt anything inherently (and I have checked), and I have tried the Configure encrypted volumes option, which leads to the same results basically.
I have tried manually creating the partitions, a 512 MB ext4 /boot partition and then partitioning the rest of the space as "physical volume for encryption" with aes encryption, 256 key size, xts-plain64, Passphrase encryption key, erase data flag, bootable flag off.
Same result, 1 primary boot partition, 1 logical (I later tried making it a primary partition to, with the same results) crypto volume that is "not active".
I also tried setting up the a logical volume manager, which created a container to create additional partitions in which I could encrypt, but it was either a partition dedicated to something (i.e. root (/) or /home, or /swap, etc) or it could be encrypted, but not both. I even tried creating a root partion, and then selecting Configure encrypted volumes, and then selecting the root partition, and here is where I thought I was getting somewhere, because then it comes up giving me all the same options above, but it also specifies mount point under encryption. Which is /, which is what I'm after. So I accept that, and it goes back to being crypto, "not active" and when I check the partition again, the mount point option is gone.
Last thing I tried was going back to having a 512 MB /boot partition, and an encrypted partition set up with Configure encrypted volumes option, and then specifying the encrypted partiton with the Logical Volume Manager as the place to create logical groups and volumes, to little avail. I can create more volumes that are either encrypted, or a useful non encrypted volumes like / (root), /home, /swap, and the like, but not both at the same time.
Following this guide: [URL] ....
This leads me to a useable system, but the system wasn't encrypted. When I booted, I wasn't asked for a passphrase, and I checked the stick with my old linux mint dristro, and I was able to mount the logical volume and look at the contents, /etc, /home, /var by activating the partition in GParted and mounting it.
A number of users seem to mark an encrypted partition as lvm and then create more logical volumes within that that either actually become encrypted, or they don't check. I'm not sure which after my testing.
[URL] .....
I have also read this: [URL] .... and this [URL] .....
I found this which shows the container I believe I should be seeing if I do this right, but I can't get it : [URL] ....
I have also watched movies on youtube about it : [URL] ....
Could the issue be that I'm using a Lexar JumpDrive? 16 GM USB 3.0.
I've gotten debian to run off of it on it's own so I kind of doubt it.
I am trying to create a bootable USB stick in Windows to install Debian on my laptop. I have looked at the guide on the [URL] website, but it seems to assume you already have access to a Linux machine with the use of zcat and other extractors. Is there anyway to create a bootable Debian USB stick in Windows? By the way, I'm trying to simply get the USB stick to become bootable and then install the OS through the internet on my laptop. My laptop does not have an optical drive, so I have to do it this way.
I'm having problems installing Ubuntu 10.10 Netbook onto my Asus 900. I downloaded the .iso then used the "make startup disc" feature in my Mint 9 desktop machine to make a usb install disk. All appears well at that point. When I try to boot from the usb stick, I get an error message as follows:
I installed Squeeze with LXDE on my old 600MHz Celeron, 256MB ram computer. But, every time I boot, the screen resolution is wrong. I can set it right with a few clicks of the mouse, but next time I boot up it has reverted to the wrong setting. I found that this problem has been reported on the LXDE forum, but the official response seems to be that it is not their problem.
I want to try Debian on my Asus Eee netbook and I'm trying to follow the instructions in URL... But just copying the ISO file to the USB drive then trying to boot from it doesn't seem to work. I just get "Missing operating system".
The Eee can use an external optical drive as well but that failed also. I'm sure I need to do more to prepare the USB drive or CD? Can I prepare the USB Drive or CD on my Windows system, and make it boot on the netbook (which has another Linux distro on it now)?
I have a HP ProLiant DL380 server and I am trying to install Debian on it. I had an error that said dhcp config failed at the installation and Debian could not find my NIC. I've Googled it and found out that I need to install required Broadcom NIC drivers.
There are images that 3rd people have created but I don't want to use them as it will be a server.
Another way to install them is to download .deb package and install it from a removable media when asked.
So I went ahead and did an exper install mode and choose adding packages from a media so an option appeared for me to install stuff from removable media now.
Each time I choosed it, my flash drive's lights were blinking but then I was getting an error says this package can not be installet are you sure to instal non signed package.
I say yes at that stage but I still can not install and it says this is probably happening because of kernel version miss match.
I downloaded latest stable copy of debian from official debian site and downloading the stable squeeze copy of the driver from official Debian site too.[URL]..
I have an HP ProLiant DL560 server with Debian 6.0 installed and cannot figure out how to get the fans to run at anything except high. I have searched google and this site, but cannot find anything that works on Debian 6; the SLES packages will install, but don't do anything.
Server Specs: HP ProLiant DL560 4x Intel Xeon 2.20GHz processors 6GB RAM 2x 72.8GB 15k rpm SCSI HDDs (Raid 1) 2x power supply
By way of background: I've been using Linux since kernel 0.97.something_or_the_other, but I've been using one of the other distros. This is my first crack at Redhat/Fedora.
I'm trying to install Fedora 10 on an old Compaq Proliant 3000, dual P-II 450, Compaq Smartarray 3200, plenty of drive space, 3C905 based NIC, original Compaq CD drive.
The install will boot from the CD just fine, I get the initial graphic menu to select whether to do an install, upgrade, etc.
I select option 1 to install and I get what looks like an ncurses based screen that asks me to select a language, another screen that asks for a keyboard, then a screen that asks me if I want to install from CD/DVD, NFS, local drive, etc.
If I select the CD install option, the next screen complains that it can't find a drive and asks me to either select a driver from a list of drivers or to insert a driver disk. Doesn't matter what driver I select, it always snaps immediately back to the screen that says it can't find the hardware to match the driver. Every time it does this, it's not spinning the CD to read the driver that I've selected.
IF I go for an NFS install, after it asks me the network parms I wind up at that same driver screen with the same results, no matter what I pick it throws me back to the can't find hardware/pick a driver screen. As far as I can tell, the NIC is never actually trying to wake up.
I know the hardware is functional because if I boot from from CD with my usual distro it identifies and starts all the hardware just fine, CD, NIC, RAID, etc.
I can see where it might work to have the necessary driver module for the CD on a floppy, but where do I get the module? I tried mounting the .iso images for the install set on another machine but I don't see anything obvious that looks like modules that I can cabbage onto.
