Fedora Installation :: F11-install From External DVD Using Boot.img CD Fails?
Jul 24, 2009
I have sevral older machines that cannot boot from usb. Until now I have installed fedora using the provided boot.iso on a CD and an external USB dvd drive with the full install DVD.
With Fedora 11, this fails. It gets as far as "finding storage devices" and fails, telling me that an unhandled exception has occured. It offers to save the details, but freezes looking for a suitable location. I have no such problems with the same DVD/external rw drive on systems that can boot directly from usb.
Can Ubuntu install and boot from external HD while still booting windows off internal HD?In an attempt to spread Ubuntu my friend wants to use ubuntu off an external HD and still have windows fully operational on the internal HD. Questions:1) Can Ubuntu install on external HD without tricky mounting methods and if so how doabout it?2) The bois have the capability to boot from usb, will grub work?
I have Vista on my Samsung R60 + and have installed Ubuntu. On start up I get the dual boot option, select Ubuntu which then goes to completeing install etc, get some HD activity then nothing.
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.
Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.
Longer version: I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.
I'm trying to install Ubuntu 10.04 (32-bit) on my external harddrive, and the boot loader also on my ext.HDDThe problem is, is that the boot loader won't install himself on my HDD. Is it possible to install the boat loader still on my external HDD?
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem?
I have an external hard drive connected to my iMac. I have installed Ubuntu on unallocated space on my external, the first time I chose to put the bootloader on the external but when I booted up the computer and held the Option key it didn't recognize an OS to boot from.I am currently reinstalling Ubuntu but placing the bootloader on the internal hard drive hoping that the Mac boot menu will recognize an OS to boot from.
When I ran the distribution upgrade from 9.04 in update manager, my screen went blank on reboot and will not recover. Every time I reboot, screen goes blank. I cannot press CTRL-ALT F1 - F6 to gain access to text shells.
I tested booting from the 9.04 live CD and it works fine. So I downloaded the 9.10 live cd on another computer and booted it on the disabled system. Same exact problem on the live CD that I had upon installation: on boot screen goes black and cannot access text shells.
What can I do next to get out of this short of going back to 9.04, which has problems that I do not want to live with?
I have an Acer netbook that I installed Remix on. Now I can't get the thing to boot from the CD drive which is connected via the USB port. Any suggestions? I set the boot order with the CD drive first and the HD last.
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
After editing gdm and reming out line "auth required pam_suceed....................!=root quiet" the server boots but hang with the login screen. other highlighed but all options greyed out.
Boots OK in text mode and operates OK.
After restoring original gdm file problem still persists.
Anyone succeed with f11 install on netbook (/ on SDHC, /boot on primary SSD/HDD drive)? My netbook (AAO) works just fine with f11 Live-on-usb-sick (created with live-usb-creator), but fails to boot fedora from SDHC.
I started preupgrade with a 200M /boot partition 50% full. According to the instructions, it is supposed to give me the option of downloading the stage2 installer later. It doesn't, and crashes horribly (see below).This worked from FC12 to FC13. Reparititioning will take a day because the FC12 kindly made the root file system LVM and nothing will resize it. (I tried this with FC11 -> 12 and ended up losing everything and rebuilding the 1T disk).
I am trying to boot Fedora15 using a USB stick. It fails to boot properly It works fine when I boot Fedora 14 using the same usb stick. I've attached some screenshots. Trying to run it on a Lenovo T500 2081CTO with an ATI graphics card.
I have read other posts regarding the installations of different distros on external hard disk, but these did not help..
I want to install fedora 12 on a new external hard disk, so that i can boot from it on any system that supports booting from usb hard disk, and do all my work from the extenal hard disk itself. I want to know the exact procedure to install fedora on extenal hdd, and what do i need to do, so that the grub, (which i will install on the /boot partition of external hdd), get detected by the primary boot loader of mbr..
Or, I just need to boot from external hard disk.. please any one try to make it possible.
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /) - /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91) - /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
I've created an LiveUSB disk with the USBcreator method in Windows 7.Now the the image is copied succesfully and the USB key is bootable.However when the boot window popsup and I select the verify & boot option, a graphical loading window comes up and right after that the system halts with the error message "Sleeping forever".What am I doing wrong? Or what is Fedora doing wrong with their LiveCD to USB media?I've did a forum search and the exact same issue is described in this thread[URL]
I have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.
I tried many parameters, including xdriver=vesa, and it cannot used graphical install.
So, I tried text install, which I have done many times in the past.
However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.
It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.
What is the point of this option?
Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.
What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
I am attempting to install Fedora 11 on a Dell Windows Server 2003 computer from CD (I just want to override the Server PC with F11). I used this media in my class last night after testing it, so I know the media itself is good. We did have lots of issues getting the keyboard and mouse to work during the install attempts last night, too, but eventually it worked. Unfortunately, at home is a different story!
I boot from install Disk 1 and get to the first screen with the option of testing the media or skipping it and I only get one keystroke then nothing. F11 just hangs/stops/freezes/locks up. Reboots don't help and I attempted to install from the F11 DVD I made, too, but the machine completely wouldn't see that disk at all! The keyboard is connected directly to the computer via PS2. I don't have a USB keyboard laying around nor an adapter to try.
I would love to hook up my children with F11! I did manage to figure out what files to download, burn to disk and how to install F11 at school yesterday).
I'm newbie in Linux, but have used Windows and Mac OS X Leopard. Used RedHat in the past, and can't figure this out. I burned Fedora12-x86_64 DVD image on DVD, and start install. Whether I use "linux text" command from boot or just select Install at graphical prompt, everything goes OK until I select hostname. I leave it as "localhost.localdomain" and press Enter. It always give me an error "Can't load class=TimeZoneWindow".
My computer is connected via ethernet to my router, and I had no problems getting online in Windows. Now, in case there are hardware questions: Intel Pentium 4 with HyperThread enabled and 64bit support (Windows 7 Ultimate 64bit runs perfectly in 64bit mode) 2Gb of DDR 400Mhz RAM I have 2 SATA hard drives with RAID option as Mirror (BIOS settings - RAID or AHCI) And 128Mb ATI RAdeon X300 series. Pretty simple, but this error aborts my installation.
I tried to do Anaconda updates, but I have no clue about URL where the image is, ex: linux updates=[URL] or I tried configuring network: linux ip=192.168.1.113 netmask=255.255.255.0 gateway=192.168.1.1 dns=68.193.158.40,24.115.70.53 and no luck. Why does "Can't load class=TimeZoneWindow" appear? Is it a network issue or what? I've seen the screenshot for TimeZone screen in the Installation Guide, but I never get to it.
I am saddened that I can't install any Linux distro with ease on my HP m8530f computer which runs on a m2n78-la motherboard. It has a Phenom CPU, 6 SATA ports and probably a fakeRaid (at least that's what I guess is causing problem). The Fedora 14 Desktop install goes all the way to the end and then I get a fail message due to not being able to mount /dev/mapper/xxxxx.
P.S. the motherboard only has SATA mode or disabled for HardDrive mode and no any other options. Seems like this is an HP custom made motherboard from Asus hence the limited options in Bios setup.
I have a Western Digital Pasport 320 GB hard drive. I wanted to create a live installation on it like a USB stick. I wanted it to serve as a portable OS that I could use to boot any other computer off of, and use it for diagnostics and anti-virus scanning on Windows based computers. The additional space is for my own personal use, kind of like having a mobile desktop where I have all of my documents in one place.What I need to know is how to set up Fedora 11 so that the hard drive will boot on most PCs regardless of their architecture. I also need to know what's a good Anti-virus to install onto it for the sake of fixing Windows hard drives.
Please keep in mind I'm a noob when it comes down to a lot of things, so if there's an antivirus I have to install manually, please included a step by step.
As I have no blank cds handy right now, I had to go the way descirbed here:URL...But when I seect my partition and / (no sub dirs, an empty ext3 formated 6.8GB partition, exclusivly for that usage) it tells me there ws no installation media found and the search path got automagically adjusted to /imges/image.img.And ideas howto fix that? Or how to install fedora from harddisk (without big fuss)?
I'm currently running F11 and am trying to replace it with a fresh install of F13, using the same partitioning layout. I downloaded the F13 i386 DVD ISO using bit torrent. (The sha256sum of my downloaded ISO matches the reference sha256sum value.) I'm trying to do the fresh install of this ISO from hard drive (without burning a DVD). Last summer I did the same procedure of installing a downloaded DVD ISO from HDD when replacing F9 with F11. The installer (Anaconda 13.42) proceeds to the point where I specify my custom partitioning layout. It then prompts me about storing a boot loader. Shortly after I reply to that, the installer gets an "unhandled exception".
rpmdb: Program version 4.8 doesn't match environment version 4.7 error: db3 error (-30971) from dbenv -> open: DB_VERSION_MISMATCH
The only nonstandard thing I did was the following. According to the F13 installation guide, for installation from HDD the file "install.img" from within the ISO files must be copied to a directory named "images". The F13 installation guide gives the following procedure:
Installation fails part way-in , prelim formating of drive is ok, Failure comes when network connection is require to continue. The Marvell 88E8056 PCI-E gigabit Lan Controller is correctly listed but network manager fails to bring it up. when I put the old F10 drive in , everything boots up , I can surf the web.
I have been running Fedora 14 on my Asus 1101HA netbook for several months without real problems. This weekend I tried to install Fedora 15, but the install failed in two ways:
* The GUI login screen never appears. I'm able to log in using character mode, but that's all.
* The network hardware is not configured, even the wired connection. Hence, I'm unable to apply updates (which I hoped might fix the GUI problem). I tried manual configuration (which is hard to find instructions for these days), but it didn't work.
The output of ifconfig shows no eth0 device, but rather something called "em2":
I've attached the Xorg.0.log file and the output of dmesg and ifconfig.
Both F15 KDE Live CD and DVD new installs fail on HP 2133 mini notebook. The device has previously accepted F12 installation without a problem. The HP 2133 has a VIA C7 processor. Is this CPU is no longer compatible with Fedora? The syslog repeats endlessly 'microcode: no support for this CPU vendor'. The Live CD will not even begin the install to diskl. The DVD will install but will fail on reboot with the microcode error. How to overcome this installation problem?. Is there a kernel upgrade or microcode update that has already resolved this and how can it be installed?
I've tried to be clever but as usual I didn't think before acting and missed a small detail.
I have recently installed karmic (dual booting with Vista) on my dell xps laptop. The install went fine, I'm very happy with my new OS.
I bought a new Seagate 500GB portable external HDD. I got a bit over-excited and installed karmic on the external drive. This worked fine and I got a lovely (but slow to appear) Grub2 menu showing my vista and both ubuntu options.
My problem is that now, when I unplug the external drive, Grub fails and I get a grub rescue> prompt. So I need the external drive to be plugged in if I want to boot.
It seems I have done something to the grub configuration. I have read around the subject but I am not confident about how best to proceed.
I understand there is an 'advanced' option in the installer which will allow me to choose where to install grub. Presumably I want it on the internal drive so that I can boot without the external one plugged in.
Am I right in thinking I can just pop in my install disk and redo the installation?
If I indicate I want to install Grub on the internal drive, which partition should I aim for?
Will I get a grub option for booting to the external drive?
Will I be able to plug the external drive into a different machine and boot from it?
I haven't done anything with the fresh install on the external drive so I don't mind losing that.
