Ubuntu Installation :: Can't Boot After Installing 10.04 From Minimal Cd On USB Stick
Aug 11, 2010
I used unetbootin (on another machine) to put the ubuntu 10.04 minimal amd64 .iso onto a usb stick. I used it to install a minimal system on a new 64-bit laptop (dual booting with Windows 7). Now, when I turn on the machine I get my choice of OS. When I pick Ubuntu, I get a blinking cursor, the harddrive is accessed. Then the cursor disappears, the harddrive is quiet, and nothing else happens.
I'm about to ditch Freenas as my NAS software and make it an Ubuntu server box. The mainboard is an Asus AT3ION-T dual core Atom board. Freenas runs happily from USB stick. I have no optical device to install Ubuntu from and would like to install Ubuntu Server to a USB stick.
I tried to build a bootable USB stick using Code: Select alldd if=~/Desktop/linux/debian-8.0.0-i386-xfce-CD-1.img of=/dev/disk1 bs=1m as mentioned here: URL... but this does not work on my MacBook 3.1, late 2007 model (yes, I am using rEFIt and my CD drive is dead). The error message upon trying to boot from the USB stick using rEFIt says something like 'unable to load bootia32.efi'.
The workaround: I took the "bootX64.efi" from here:URL... on the USB drive and renamed it as "boot.efi".I copied the "debian-8.0.0-i386-xfce-CD-1.iso" to "/efi/boot" on the USB drive and renamed it as "boot.iso".So now my USB stick has 2 files only: "/efi/boot/boot.efi" and "/efi/boot/boot.iso" and nothing else.Now I was able to boot from the USB stick get into a GRUB prompt.
The installer starts fine and I choose my locale, keyboard etc. until it starts to scan for the CD drive and I face...The error message says that a CD was not found (as expected).I fired up the shell offered by the installer and mounted the USB stick to "/mnt/usb" like this:
Code: Select allmount /dev/hdb1 /mnt/usb
It works and I can see my ISO file in "/mnt/usb/efi/boot/boot.iso".I tried to mount the ISO image to "/dev/cdrom": Code: Select allmount -o loop -t iso9660 /mnt/usb/efi/boot/boot.iso /dev/cdrom
waited for a while and killed (control + c) the process and found that my "/dev" folder has been flooded with files named like the string "loop" followed by some digits (loop1245, loop8766 etc.).Can the Debian installer be somehow tricked into believing that the ISO file on the USB stick is the mounted CD?
I am attempting to install 10.10 from a usb stick after a disc installation failed, but it is taking forever. I am stuck on the screen which says 'Ubuntu 10.10' and has four little orange dots flashing as if it is loading. It has been like this for over 20 minutes now. Is this unusual or is it normal? Anyway, I am restarting my PC and trying again.
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement 147 GB for Windows, C: 85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
I live in a country where 1Mbit broadband is a premium service for large businesses. I am paying a little over $40 a month for a 128k connection with monthly capping. I want to download Fedora but the download is just huge for my connection, especially as it is used for work 14 hours a day. I have attempted the LiveCD and got the 'ext4 cannot be used for boot' error. I also have several other specialised distros on this machine and it's going to be a pain inserting a new boot partition just for Fedora.
Like it is possible with Slackware, can I just download the first CD of the Fedora 11 set and get a minimal install from this or does Fedora need the whole set of disks? Is there a simple enough net install option that I could use instead? I can't understand why they can't just release something like Ubuntu's alternate install CD.
I'd like to say I'm very impressed with Fedora 11. I'm a long time Linux user and I've tried many distros. But, I usually keep only the best on my laptop. For a long time that was Ubuntu but, I think Fedora 11 has made some key improvements over Ubuntu and I'm eager to switch. The problem is: I haven't been able to run Fedora as anything other than on the Live CD. Everything works perfectly and it installs but, when I reboot, Grub begins. Instead of booting, however, Grub drops into its minimal shell and gives me a command line.
I've tried installing it a number of ways now and have read much about the problems with Ext4 on Grub and took special care to see that Grub has its own, separate, /boot ext3 partition. Even then, no luck. My hardware should work fine. I've got an HP DV-5 with 4GB RAM, AMD Turion 64-bit dual-core @ 2 Ghz, and an IDE 250GB hard drive. I'm working with the 64-bit Fedora 11 Live disc with KDE as the Gui.
I'm trying to install Ubuntu 9.10 from USB stick. I used System>Admin>USB Start up Disk Creator and a 9.10 .ISO version to create the bootable USB stick.
When I plug my USB key into my computer, my computer doesn't boot from it. I tried on several other computers and none of them boot from my USB key. The bios settings on all my computers boot from removable media first.
I repeated the above steps with a different USB key and I still can't boot from the USB key. When I browse the USB key directories, I can see all the necessary files to install ubuntu.
Last year, I didn't have trouble installing ubuntu 9.04 from USB key. Not sure what I'm doing wrong this time.
Can anyone tell me how to trouble shoot this problem?
After several attempts at installing Ubuntu 10.10 on a Samsung N150 laptop/netbook, I have finally succeeded, but it won't boot without the installation USB drive being plugged in. Trying to boot it without the USB thumb drive it just stops at a black screen and does nothing.
With the USB drive in, it doesn't actually load up the installer, as you would expect, but boots normally into Ubuntu. Once booted, you can remove the drive and it runs fine without it. When you plug it in, it sees it as /dev/sdb, and the only hard drive is also seen as /dev/sdb. So it never mounts it. It can mount any other USB thumb drive normally.
I have a USB stick with a mechanical write protection (a small switch that disables writing on the stick). I have installed Ubuntu 10.04.1 on this device usung the startup drive creator. If the switch is in the position that allows writing, Ubuntu boots as expected. But if I switch to write protection, I only see a blinking cursur. Because it is a live system on the stick I expected that it should work as well, because nothing should be written to the stick. Does anyone have an idea why it behaves like this and how I can change it?
I want to install ubuntu 10.10 on my old laptop. I try to do this by usb stick, i came to the blue window boot device, there are 4 options to choose: Hard disk, cd-rom/dvd, floppy disk and lan boot. I tried all of them, but nothing happend.
Before: I had 2 os's ubuntu and windows installed on my system. Recently, I decided to install ubuntu to a flash drive. All went well except grub was not installed to the flash drive, but appended the existing grub setup on my hard drive.
Now: Even if I set the default system in grub as windows, or the original ubuntu install, my system will not boot unless the usb stick is plugged in. I get message. Error: grub rescue: My ideal solution: To stop grub searching for my flashdrive before loading the boot menu, and if possible to write grub to the flash stick.
Cannot install Ubuntu10.10 from usb stick to Vista PC for dual boot-installer crashes.Launchpad report bug not allowing me to report new bug either!I have been trying to install 10.10 ALL day unsuccessfully. Unhappy about unsuccessful outcome!
I have downloaded the "debian-7.8.0-amd64-netinst.iso" from the official website. I then used dd to create a bootable usb stick. The usb stick is detected by the HP Proliant server but it does not boot from it, even if no other OS is present (so boot order is not the problem, and even if it was, i checked the bios). I tried the original iso in a Virtualbox environment and it worked without a problem.
I then tried creating the usb stick in Windows using "Unetbootin" and "LinuxLive Creator". When I insert the stick into the HP this time it boots from it and all is good. I can not use this approach though, because I want to automate the installation until I can SSH onto the server. But somehow unetbootin and linuxlivecreator overwrite my modified debian isos preseed file (which also works perfectly on a Virtualmachine).I also used dd to create a Ubuntu usb stick and that works without a problem on the HP Proliant.
I burned a live dvdrw with the hybrid live cd of debian 8.1 gnome and installed Debian onto the 32gb usb stick like this
8gb for / 22 for /home 2gb for swap
after chrooting into the usb stick with the live dvd-rw and installing grub2 there again cause the installation couldn't do it without chrooting first.. I wasn't able to boot from the laptop I installed Debian with but I could on my Desktop PC.
I wondered if you needed a copy of my grub.conf? so here is the pastebinnet of /boot/grub/grug.conf
I am trying to boot Fedora15 using a USB stick. It fails to boot properly It works fine when I boot Fedora 14 using the same usb stick. I've attached some screenshots. Trying to run it on a Lenovo T500 2081CTO with an ATI graphics card.
I am having trouble with setting up the grub based system on my external hdd. I am trying to have one grub which is going to load operating systems, and livecd if any (usb install). I am stuck at installing Ubuntu 10.10 Minimal version (i don't need gui for linux).Here is what I have done so far:
1. Created 2 primary partitions - windows 7 recovery and data (ntfs) 2. Created an extended partition for linux stuff. 3. Create a logic partition (10MB) for grub (ext2)
After a long time I tried ubuntu(9.10) again on my fileserver, I have some remarks; why does a minimal server installation include X/openoffice? I don't need document conversion on a fileserver and I bet a lot of people don't. Wouldn't it be better to create a new server package and leave minimal minimal? low memory installs (64mb) don't work unless you configure swap by hand in between things, 64mb ram is a lot in my eyes. I mean, not to be rude but if I wanted all this I could've better installed Solaris.
That said it's stable and running fine. Since it's my home fileserver I tried to convert my previously created raid10 mirror on an adaptec 1200 card to a softraid 5 solution. This is wat I did:
I'm having problems installing Ubuntu 10.10 Netbook onto my Asus 900. I downloaded the .iso then used the "make startup disc" feature in my Mint 9 desktop machine to make a usb install disk. All appears well at that point. When I try to boot from the usb stick, I get an error message as follows:
I've just installed debian testing on my computer (netinst AKA basic shell version). Now, how do I do a minimal gnome install? Minimal means, I don't need libreoffice or any extra bloat. However, I do want nautilus, gnome-settings-daemon and networkmanager (and of course, firefox!).
Also, is audio included or not in gnome-shell?
If I just install the gnome-shell package (with --no-install-recommends package), will it pull in gdm, Xorg, etc. or do I have to install them separately? Also, need to confirm whether my sources.list is properly set or not:
Code: Select alldeb http://ftp.security.debian.org/debian/ stretch main non-free contrib deb http://security.debian.org/debian-security stretch/updates main
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
I am new to ubuntu even if I work in IT since 1999 so I am pretty confident I can follow instructions as needed. I need to build a custom install of Ubuntu with minimal software installed (I actually only need VMware View Client and a few more + graphic environment) and I would like to put it all on a USB key and use it to boot any PC so I can fire up my application. Is there a way to do this? Any instructions? I found something about doing an install on USB but nothing about a minimal install (only full).
Since playing games on Ubuntu is a pain, I've decided to sacrifice a few GB's to install Windows 7 on another partition. Is there any tool for Ubuntu to make USB sticks bootable? I've tried UNetbootin, but that's just for Linux distributions. I use Ubuntu 10.04 64Bit and want to install Windows Home Premium 64Bit, in case it's important...
Ok now, whenever I try to boot up Ubuntu (I also have Windows 7 installed), this message pops up:
Code: [ Minimal BASH-Like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a
I'm installing 11.3 from USB stick. I went through the partition screen, etc and it did not mention anything about any data or other stuff on the harddisk. but when I got to the "Live Installation Settings" page, it shows the booting sections as:
+ openSUSE 11.3 (default) + openSUSE 11.2 - 2.6.31.12-0.2 (/dev/sdb2) + Linux Other + Failsafe -- openSUSE 11.3
how do I blow those others away? I want them erased aand don't want them in grub or "installed around", rather, I want it "installed over" them. Also, the "Linux Other" is the USB stick. Is it a problem to have that?
I'm running debian 8.3 (kernel 4.1) on a BeagleBone black and writing a program with C# (vs2015) along with mono on the beagle. So far everything is working out great. What I'm trying to figure out now is how to make this setup run like a kiosk with it booting into my program with a graphical environment but with no actual desktop (just a blank screen). There will be an LCD showing the program but at the same time I want the program available through a remote connection.
I've got the blank desktop working via VNC but I think I should change to xrdp (the target users all have windows with remote desktop connection installed by default but what vnc is or have the permissions to install a vnc client).
Anyway, I think getting xrdp started with my program at boot will be pretty simple (famous last words?). I simply start the xrdp instance in rc.local then use the session script to start my program.
What I cant wrap my head around is not having two copies of my program running - one showing on the LCD using HDMI and the other running on a second desktop through xrdp...
