Ubuntu Installation :: Grub Won't Start Unless Usb Stick Mounted From Boot?
Jan 11, 2011
Before: I had 2 os's ubuntu and windows installed on my system. Recently, I decided to install ubuntu to a flash drive. All went well except grub was not installed to the flash drive, but appended the existing grub setup on my hard drive.
Now: Even if I set the default system in grub as windows, or the original ubuntu install, my system will not boot unless the usb stick is plugged in. I get message. Error: grub rescue: My ideal solution: To stop grub searching for my flashdrive before loading the boot menu, and if possible to write grub to the flash stick.
View 3 Replies
ADVERTISEMENT
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Nov 17, 2010
OpenSUSE have Dolphin as default filebrowser, but if i plugin an USB Memory Stick it automatic open Nautilus. How can i change this to Dolphin?
View 1 Replies
View Related
Jun 1, 2010
I did a clean installation of Ubuntu 10.04 and I found that after the computer booted, the GRUB stopped by waiting for entering command -- "grub >". The GRUB version is 1.98. I want to go directly to the GRUB boot menu after computer booted.
View 9 Replies
View Related
Dec 20, 2010
I have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
View 1 Replies
View Related
Feb 7, 2010
I' ve tried to do a iso multiboot 1gb pen stick with grub2 bootloader. I 've already readed all is it possible finding on the WWW but there are some problems i don't understand how to solve.
This is my sitution:
-koala 32bit installed on my pc with grub2 bootloader
-1gb pendrive parted as follow:
In the first fat16 partition there is installed grub2. On the second ext2 one there are iso files.
This is what i've do to install grub2 on my pen:
So i've created /boot/grub/grub.cfg file with the follow lines:
When i reboot by the pen stick, grub load up to it says me:
It seems not reding /boot/grub/grub.cfg
View 2 Replies
View Related
Jul 15, 2010
I get this pop-up error message whenever I plug it in or try to open it via my file manager:
Quote:
Failed to mount "16G Removable Volume".
Rejected send message, 1 matched rules; type="method_call", sender=":1.81" (uid=1165 pid=4087 comm="exo-mount -n -h /org/freedesktop/Hal/devices/volum") interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=3003 comm="/usr/sbin/hald --daemon=yes ")).
[Code].....
View 15 Replies
View Related
Oct 18, 2010
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
View 9 Replies
View Related
Jan 28, 2011
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
View 5 Replies
View Related
Jun 22, 2010
If I use the super grub disk I can get to my ubuntu partition otherwise my windows partition boots automatically. I spent over an hour in the community documentation using the live cd to reinstall grub and nothing has fixed it. I think that grub is installed and the windows bootloader is just taking precedence.
View 3 Replies
View Related
Jan 24, 2011
A friend of mine installed ubuntu 10.10 alongside with Windows XP. During the installation he manually edited partitions. Now, the grub loader does not start, and in order to start ubuntu he has to use live cd to choose "boot from first hard drive" in the menu. Windows XP is missing from the boot options.
See the output of "fdisk -l" below (he has two identical hard drives). It looks like a big mess. Any idea where to start fixing this?
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x05c605c5
[Code]...
View 6 Replies
View Related
Aug 5, 2010
a windows installation on a fake-raid, /dev/mapper/ddf1_AR01p1 and an xtra penguinFS on ddf1_AR01p2. I simply tried to boot "Super Grub Virus" from a usb stick ... and the $%!($ER hosed the array. Luckily, my day to day OS and important data is on a different set of disks ... but my BIOS boot target is set to the fake-raid, so it did not kill anything genuinely important ... I just got lucky.
I would really like to restore the windoZe partition as it WAS. I actually use it a couple of times each year. I would just reinstall the OS ... really NOTHING important on those 2 disks, but I have no idea where my XP disk can be found ... but I know the xp installation is hiding in /dev/null ....
View 1 Replies
View Related
Jan 10, 2010
I'm trying to install Ubuntu 9.10 from USB stick. I used System>Admin>USB Start up Disk Creator and a 9.10 .ISO version to create the bootable USB stick.
When I plug my USB key into my computer, my computer doesn't boot from it. I tried on several other computers and none of them boot from my USB key. The bios settings on all my computers boot from removable media first.
I repeated the above steps with a different USB key and I still can't boot from the USB key. When I browse the USB key directories, I can see all the necessary files to install ubuntu.
Last year, I didn't have trouble installing ubuntu 9.04 from USB key. Not sure what I'm doing wrong this time.
Can anyone tell me how to trouble shoot this problem?
View 5 Replies
View Related
Aug 11, 2010
I used unetbootin (on another machine) to put the ubuntu 10.04 minimal amd64 .iso onto a usb stick. I used it to install a minimal system on a new 64-bit laptop (dual booting with Windows 7). Now, when I turn on the machine I get my choice of OS. When I pick Ubuntu, I get a blinking cursor, the harddrive is accessed. Then the cursor disappears, the harddrive is quiet, and nothing else happens.
View 9 Replies
View Related
Oct 25, 2010
After several attempts at installing Ubuntu 10.10 on a Samsung N150 laptop/netbook, I have finally succeeded, but it won't boot without the installation USB drive being plugged in. Trying to boot it without the USB thumb drive it just stops at a black screen and does nothing.
With the USB drive in, it doesn't actually load up the installer, as you would expect, but boots normally into Ubuntu. Once booted, you can remove the drive and it runs fine without it. When you plug it in, it sees it as /dev/sdb, and the only hard drive is also seen as /dev/sdb. So it never mounts it. It can mount any other USB thumb drive normally.
View 4 Replies
View Related
Mar 19, 2011
My old server machine running Ubuntu 6 experienced hardware failure, so I built a new machine with spare parts and decided to install 10.10. I used the 2 HDDs from the old machine and decided to use existing partitions for the 10.10 installation. I specified the existing partitions on a 250 GB PATA drive for root, /boot, /home, and swap. For some reason when I booted up 10.10 for the first time, the other HDD (750 GB SATA) was mounted as /boot. I never specified the second drive to be used for anything during the installation, so I have no idea why this happened.and how can I change the mount point for /boot? I would like the highlighted partition in the attached screenshot to be /boot. I really hope nothing on the 750 GB drive was overwritten in this whole process, because it contains all of my photo and video backup.
View 1 Replies
View Related
May 16, 2010
i have installed ubuntu 9.10 inside windows vista.now when i start my system i get option to select windows or ubuntu. windows can start successfully but ubuntu start up fails and give grub shell prompt as :
[Code]...
View 4 Replies
View Related
May 14, 2010
host - ubuntu 10.04
guest (VM) ubuntu 9.10
Sun VirtualBox - virtualizer
How to start grub screen of ubuntu 9.10 (guest) at boot. Pressing [ESC]/F1/F2/F5 etc. seems having no function.
View 2 Replies
View Related
Nov 7, 2010
I have a USB stick with a mechanical write protection (a small switch that disables writing on the stick). I have installed Ubuntu 10.04.1 on this device usung the startup drive creator. If the switch is in the position that allows writing, Ubuntu boots as expected. But if I switch to write protection, I only see a blinking cursur. Because it is a live system on the stick I expected that it should work as well, because nothing should be written to the stick. Does anyone have an idea why it behaves like this and how I can change it?
View 9 Replies
View Related
Jan 6, 2011
I want to install ubuntu 10.10 on my old laptop. I try to do this by usb stick, i came to the blue window boot device, there are 4 options to choose: Hard disk, cd-rom/dvd, floppy disk and lan boot. I tried all of them, but nothing happend.
View 5 Replies
View Related
May 27, 2010
Fedora 13..Please advise how to start the grub menu at boot? [ESC]/[Shift] etc. without function.
View 6 Replies
View Related
Jan 29, 2011
Cannot install Ubuntu10.10 from usb stick to Vista PC for dual boot-installer crashes.Launchpad report bug not allowing me to report new bug either!I have been trying to install 10.10 ALL day unsuccessfully. Unhappy about unsuccessful outcome!
View 9 Replies
View Related
Mar 14, 2015
I have downloaded the "debian-7.8.0-amd64-netinst.iso" from the official website. I then used dd to create a bootable usb stick. The usb stick is detected by the HP Proliant server but it does not boot from it, even if no other OS is present (so boot order is not the problem, and even if it was, i checked the bios). I tried the original iso in a Virtualbox environment and it worked without a problem.
I then tried creating the usb stick in Windows using "Unetbootin" and "LinuxLive Creator". When I insert the stick into the HP this time it boots from it and all is good. I can not use this approach though, because I want to automate the installation until I can SSH onto the server. But somehow unetbootin and linuxlivecreator overwrite my modified debian isos preseed file (which also works perfectly on a Virtualmachine).I also used dd to create a Ubuntu usb stick and that works without a problem on the HP Proliant.
View 3 Replies
View Related
Aug 13, 2015
I burned a live dvdrw with the hybrid live cd of debian 8.1 gnome and installed Debian onto the 32gb usb stick like this
8gb for /
22 for /home
2gb for swap
after chrooting into the usb stick with the live dvd-rw and installing grub2 there again cause the installation couldn't do it without chrooting first.. I wasn't able to boot from the laptop I installed Debian with but I could on my Desktop PC.
I wondered if you needed a copy of my grub.conf? so here is the pastebinnet of /boot/grub/grug.conf
[URL] ...
View 14 Replies
View Related
May 29, 2011
I am trying to boot Fedora15 using a USB stick. It fails to boot properly It works fine when I boot Fedora 14 using the same usb stick. I've attached some screenshots. Trying to run it on a Lenovo T500 2081CTO with an ATI graphics card.
View 2 Replies
View Related
Dec 5, 2010
I am using Gnome and Squeeze. I am wondering if I have a problem of understanding, or a problem that I found with Gnome.
My configuration is with a 3 hard disk system.
disk1 (Debian)
disk2 (XP and Fedora)
Disk3 (W7 and a Data partition)
When I boot and log in, all partitions for disk2 and disk3 are mounted read-write. Only by going to command line am I able to unmount the drives with the following sequence
cd /media
umount *
umount *
I should be able to mount and umount a drive by providing or responding to a root password. But I am not given the option to present a password. My request is blocked.
I also do not want to see the drives remounted after a boot. I tried to find out how this was managed, but I was unable to discover the module and it's parameter list that controls or does this task.
View 1 Replies
View Related
Jun 12, 2011
I'm trying to run ubuntu 11.04 (64-bit) on my hp pavilion tx2100ed but it won't boot. After the grub bootscreen it goes black and doesn't react to Ctrl-Alt F1 ..F4.
Also booting the recovery mode doesn't work
To be able to start the installer I had to use xforcevesa.
Does any one know what this can be and how to solve it?
can i force x to start in vesa mode using grub commands?
View 3 Replies
View Related
Nov 29, 2010
In order for me to get started with Linux, I downloaded & installed Virtualbox (V3.2.10) on my WinXP machine, and downloaded the Puppy Linux image from as per[URL].. When I start up the VM, I get a GRUB menu allowing me to boot
Quote:
Linux (on /dev/hda1)
Install GRUB to floppy disk (on /dev/fd0)
Install GRUB to Linux partition (on /dev/hda1)
I tried the first option, which results in Quote:
Booting 'Linux (on /dev/hda1)'
root (hd0, 0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz root=/dev/hda1 ro vga=normal
[Code]...
View 7 Replies
View Related
Dec 22, 2010
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
View 9 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
