Debian Installation :: Grub Not Installed Properly - Cannot Boot From Anywhere

Mar 1, 2015

I have an hp pavilion 15-b106ed with UEFI. I disabled secure boot and installed debian jessie form the CD1 iso (RC1 installer) burned to an USB key. Installation went smoothly, but after rebooting I get grub's terminal-like screen saying:

"GNU GRUB version 2.02 beta2-9ubuntu1. Minimal BASH-like line editing is supported... etc"

The problem is that as soon as I turn on the computer that grub screen shows up and I can't boot from USB anymore nor
access the BIOS settings, no matter how fast I press F9, F10 and such. I guess I have to tell him to boot from the USB using the grub terminal...

View 9 Replies


ADVERTISEMENT

Debian Installation :: Installed Vmlinuz And Initrd.gz (squeeze) In /boot/newinstallation And Added To Grub The Lines?

Sep 17, 2010

I have installed vmlinuz and initrd.gz (squeeze) in /boot/newinstallation and added to Grub the lines:titleNova Instalaçãoroot(hd0,0)kernel/boot/newinstall/vmlinuzinitrd/newinstall/initrd.gzNevertheless, when I choose this option at the grub, it begins to start the kernel vmlinuz and thus restart the system. The installed Debian Lenny boots in a normal way.

View 10 Replies View Related

Ubuntu Installation :: Installed 9.10 On Macbook Pro But Won't Boot Properly

Jan 4, 2010

I installed Ubuntu 9.10 desktop x86 on my macbook pro, I selected erase and use entire harddisk, after install, I restarted, but there is only a flashing question mark on a gray background screen, if I press option when power on, I can select a disk called "windows", then it boots into ubuntu, I wonder what is the problem?

View 1 Replies View Related

Ubuntu Installation :: PCBSD Installed For Triple Boot - Grub Menu?

Apr 10, 2010

I learn from a BSD magazine and installed PCBSD on my Dell notebok a single harddisk with a hope to have a triple boot. I have all the three OS, but could not find the menu.lst from /boot/grub/.... All I can find is a grub.cfg which is not editable. Someone from this forum said that menu.lst = grub.cfg.

View 4 Replies View Related

Ubuntu Installation :: Only Boot To Grub Rescue When Upgraded (wubi Installed) 10.04 To 10.10?

Oct 11, 2010

Installed Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)

View 4 Replies View Related

Debian Installation :: 'grub-pc' Package Failed Into /target/. Without The GRUB Boot Loader

Sep 21, 2010

I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.

View 3 Replies View Related

Debian Installation :: Successfully Installed But No Grub Entry Added

Apr 12, 2011

I have just installed Debian and the installation went smooth (net installation). The last prompt was to specify if you want to be able to boot 3 different OS's using grub. I answered yes (I have Win7, Ubuntu and now wanted to install Debian for testing purposes). Is there any way I could manually add entry to grub for booting Debian, for instance from Ubuntu adding to menu.lst?

View 2 Replies View Related

Debian Installation :: Installed Dual Boot 6 RC2 / No Boot At All

Apr 17, 2011

Before the installation, I had triple boot of WinXP, Win 7, Ubuntu 10.10. As you can guess, the main boot-loader was grub. The second is Win 7 boot loader, and there it gives the option what to choose, load XP or Win 7.I made a decision to remove Ubuntu and install Debian(you know better than me why I did). So first, I searched a guide how to un-dual-boot. It told me to delete the two partition that Ubuntu use(swap and ext4) and write to MBR the win 7 boot-loader(using EasyBCD), so I delete them and use EeasyBCD. At this stage, I had 2 partitions: NTFS for XP and NTFS for Win 7, and the Win 7 boot-loader(and XP) worked pretty well.I install the latest testing of Debian(6 RC2) from DVD1 using this guide, except I choose to use the graphical installer, ext4(not ext3 as there), install the desktop environment, and choose to install grub(even know it didn't asked me). The swap partition I set is 3 GB because my RAM is 2 GB, even know that ubuntu set it in the past to 2 GB.The installation went pretty well, just when come to grub package, it says that there was an error with installing grub package(it didn't told me what), I had no choice, so I choose to skip over grub/lilo and finish with no boot manager. I was thinking to myself: "So I couldn't install grub, at least I have the Win 7 boot-loader(which contain XP loader), and maybe Win 7 boot-loader will recognize Debian too.". But I end up with no boot at all.It told me than when choose not to install boot-manager that I need to load /vmlinuz and give it the parameter root=/dev/sda4(my deb partition).I think that if I could install grub, I could load all my boots("sudo grub update" right?).How can I fix it?

View 3 Replies View Related

Ubuntu :: GRUB Does Not Work Properly On Boot?

Mar 5, 2011

Today when working with Windows 7 Disk Management, I carelessly mark the partition on which Win 7 is installed as ACTIVE and the chain of problems began. When I restarted my laptop, something like this appeared:

Code:
No such partition.
Grub rescue>_

[code]....

View 2 Replies View Related

Debian Multimedia :: Installed And Want To Install Compiz (properly)?

Mar 31, 2011

I installed debian and want to install compiz (properly).Read this thread Compiz and followed the instruction to install the packages. It mentions xorg.conf which does not exist where it tells me to look.I can type "compiz --replace" and it does do something but all the window borders disappear. I tried compiz setting manager - still same problem.And no visual effects (presumably due to missing xorg.conf)

View 9 Replies View Related

Debian :: GRUB Refused To Be Installed / Grub Loader Error 15

Feb 4, 2010

I tried to install Open Office following a guide in OpenOffice.org but after several attempts debian refused to boot properly. I decided to re-install Debian 5.0. When we came to the installation of the boot loader GRUB refused to be installed. I stopped the installation expecting to go back to the beginning. But now it tries to boot saying:Grub loading stage 1.5.

Grub loading, please wait...
Error 15

This is an old Toshiba 3110 with Windows 98SE installed which I have successfully customized and do not want to loose. What can I do to get back into W98SE and then re-install Debian properly?

View 14 Replies View Related

Debian Installation :: Dual Boot - Install After Windows Is Already Installed

Jul 29, 2011

how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.

View 3 Replies View Related

Debian Installation :: Get Grub2 To Boot Up Properly But "xputs" Error Pops Up And Drops To The Recovery Prompt

May 4, 2011

I switched over from Ubuntu because I realized Ubuntu sucks now (lol), but anyways... Now I'm trying to get Grub2 to boot up properly, but this "xputs" error pops up and drops me to the recovery prompt. I tried the grub-install dev/sda and all it did was recognize my Windows 7 OS (as Vista) and added it to the bootloader list and didn't fix the "xputs" issue.

I heard that doing a chroot is the most effective solution. Forgive me, but I don't know what "chroot" means or how effective it is. I can specify more information about where the OS is if needed. I have the boot flag set to the Debian OS at the hd(0,5) or sda5 I think, and Windows is at sda1 (I think). I just want to make sure I can fix this without damaging Windows, and I'll try to get more information.

Right now, I can only get into Windows or Debian with UBCD and Grub2 Super Disk and I know that sometimes Parted Magic could orderly mount the disks differently, so I don't know if it was sdaX or sdbX, but probably sdaX. I'll check again.

View 1 Replies View Related

Debian Installation :: GRUB In Boot Partition?

Jun 19, 2012

I am new to Debian but have some basic experience with Linux and am currently trying to triple boot Windows 7, Fedora 16, and Debian on an HP Pavilion dv7. I have the Windows Boot Loader on my MBR because I've heard that Windows updates can cause boot issues if GRUB is installed there. This means that I've been installing GRUB in the /boot partition for each Linux distro and creating corresponding entries in the Windows boot menu.

This has worked in the past with both Fedora and Ubuntu, but I have not been able to work around it with Debian. When I choose my Debian option in the Windows boot loader, it loads GRUB but hangs after it prints "Welcome to GRUB!", and I have to restart the computer. I would like to hear what more experienced Linux users have to say both about why this isn't working for Debian and about if keeping the WIndows boot loader is the right way to go.

Also, here is my partition layout:

Partition 1: SYSTEM (HP pre-installed) (209 MB)
Partition 2: Windows Partition (472 GB)
Partition 3: Extended (160 GB)
1: /boot for Fedora (524 MB)
2: Physical Volume for other Fedora partitions (79 GB)
3: /boot for Debian (749 MB)
4: Physical Volume for other Debian partitions (80 GB)
118 GB free space
Partition 4: HP_TOOLS (HP pre-installed) (108 MB)

View 14 Replies View Related

Ubuntu Installation :: Can't Get Grub To Work Properly

Jan 2, 2011

After windows 7 failed to install and decided to take my partitions with it I managed to restore them from liveCD.I now can't get grub to work properly. I finally got it to find boot into one of the my two OS', but then borked grub it again when trying to update-grub2.Output from bootinfoscript attached.

View 9 Replies View Related

Debian Installation :: GRUB Missing OS On Multi Boot

Oct 29, 2010

I just netinstalled Squeeze to a netbook with Windows7. The installation went well without any problem. Linux is also working OK. When I boot now, grub does not show Windows7. I took default settings during installation. I mean I did not do anything special. What should i do to fix it? Should I run osprober and grub-update?

View 3 Replies View Related

Debian Installation :: Triple Boot On A Netbook: Grub Does Not Appear

Dec 26, 2010

I recently bought a netbook on which Windows 7 Start Edition was installed. I partitioned the disk to install 2 other linux distributions : Backtrack 4 and Debian Lenny. Here is my partition scheme :

Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc6a9bf3e
[Code]...

Partition table entries are not in disk order During both of the installs, I chose to install Grub. Unfortunately, when I start my netbook, it launches Windows 7 automatically and I do not see grub...

View 6 Replies View Related

Debian Installation :: Grub 2 Not Setting Boot Record?

Mar 21, 2011

I've been using squeeze for a year or two now, on a PC dual booting with windows xp. Not long ago I thought that, as it's now become the stable release version, I'd do a fresh install, which I've been trying to do with the first two dvds. The installation proceeds as expected, up to and including setting grub. However, although grub saysthat it has detected windows xp, and I tell it to set up the dual boot, the computer on reboot goes straight into windows xp, with no on-scrteen option shown for choosing debian.

View 6 Replies View Related

Debian Installation :: UEFI GRUB Broken - Dual Boot 7.7 And Win 8.1

Dec 23, 2014

My Toshiba Satellite C870-198 has Debian 7.7 installed in UEFI mode alongside Windows 8.1. The GRUB menu no longer displays, but the machine boots straight into Windows.

I can boot into Debian or Windows from rEFInd installed on a USB stick. The rEFInd menu has the following entries:

The Debian entry actually launches the GRUB menu which was installed with Debian.

Code: Select allBoot Microsoft EFI boot (Boot Repair backup) from Basic data partition.
Boot supposed Microsoft EFI boot (probably GRUB) from Basic data partition.
Boot EFIubuntugrubx64.efi from Basic data partition.
Boot EFIdebiangrubx64.efi from Basic data partition.
Boot bootootx64.efi from Basic data partition.
Boot vmlinuz-3.2.0-4-amd64 from boot.

In an attempt to fix GRUB I executed the commands in the 'Reinstalling grub-efi on your hard drive' section of: [URL] ....

Code: Select allmount /dev/sda1 /boot/efi
... surprisingly returned:
Code: Select all$LogFile version 2.0 is not supported.  (This driver supports version 1.1 only.)
$LogFile version 2.0 is not supported.  (This driver supports version 1.1 only.)
Did not find any restart pages in $LogFile and it was not empty.
The file system wasn't safely closed on Windows. Fixing.
Code: Select all[ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD"

... returned "EFI boot on HDD".

[Code] ....

... Where is Debian?

FULL HISTORY ....
=============================

The laptop came with Windows 8 preinstalled. I switched off Secure Boot and installed Ubuntu for UEFI dual boot. I recall having to use Boot Repair to get the GRUB boot manager working properly for both systems.

Recently I decided to replace Ubuntu with Debian 7.7 and first cloned the entire hard drive to a USB drive (The Clone Drive). This drive successfully boots into Ubuntu in UEFI mode.

Following this I took the opportunity to update Windows to 8.1, which broke GRUB as expected, so that the machine would only boot straight into Windows.

I installed Debian from a live USB stick in the mistaken belief that it would be bootable in UEFI mode. It did boot OK in legacy mode.

I then burned the full Debian 'DVD' image to a USB stick, booted it in UEFI mode and reinstalled Debian. In UEFI mode GRUB allowed me to boot into both Debian and Windows.

At this point I tested The Clone Drive. It was still able to boot into Ubuntu as previously, but after powering down, unplugging The Clone Drive and rebooting, the GRUB menu failed to appear and the machine booted straight into Windows. This is its current state.

View 13 Replies View Related

Debian Installation :: Dual-boot Grub Rescue Says No Such Device

Feb 13, 2015

I'm inexperienced in Debian. I have a dual-boot machine (64-bit, Debian 7.3, Windows 7, legacy boot) and encouter a problem at boot ever since I completed the installation of Debian 7.3 alongside the exising Windows 7. This machine has six hard drives: two are intended for ntfs storage of general data (raided together by RAID1); two more are intended for ext4 storage of general data (also raided together by RAID1); the fifth contains the Windows OS files and the sixth contains the Debian OS files. The problem is that I arrive to the grub_rescue each time at boot, seeing the message:

GRUB loading.
Welcome to GRUB!

error: no such device: e081517b-3399-4067-9294-8f0686f753ca.
Entering rescue mode...
grub_rescue>

View 2 Replies View Related

Debian Installation :: 8.3 And Windows 10 Dual Boot GRUB EFI Removed

Feb 3, 2016

I've been using Debian for a few years but always on dedicated boxes and/or VMs.

Finally decided to dual boot Debian and Windows on my main Desktop PC.

Installed as I normally would using, however this time using a seperate drive (one for the existing Windows 10 install and the other for Debian), Debian install detects that windows has an EFI partition and sticks an entry in there, which is fair enough, and everything working fine. Then I spent some time configuring all my software and set it all up just the way I like it. I've rebooted Debian a few times to check it's working correctly and it is.

The issue arrives when I reboot and load into Windows 10. It boots fine.

However after a further reboot GRUB no longer loads... and the machine just boots directly into Windows 10.

After doing some further digging into my EFI partition (and reinstalling various times) it would appear that after a reboot Windows 10 deletes the entry GRUB creates in my EFI partition after EVERY reboot.

Done some googling and most people advise turning off 'fast boot' in Windows as it locks certain partitions to facilitate the machine going into hibernation, only to find that it's always been turned off on my machine (I recall due to a driver issue with my graphics card this had to be turned off when I installed Windows 10).

I've found this article on the Ubuntu forums : [URL] .... however I've tried their steps and windows is still doing a hostile takeover of my EFI partion after a reboot!

Any way to stop Windows 10 from interfering with my EFI files after a reboot? (without doing the obvious thing and kill Windows off).

View 4 Replies View Related

Debian Installation :: Remove GRUB Boot Loader From My System?

Apr 3, 2010

I've had to give up trying to install linux. It just won't work on my machine, a Presario 6370us that has been upgraded over the years such that it is not compatible with linux, apparently. (You can read my travails elsewhere on this board; thanks very much to all who tried to help.)

Now, how do I remove the GRUB boot loader from my system? I need the system to boot directly to Windows XP.

I can't start linux in any way, shape, or form, so I need to either edit GRUB inside the GRUB environment itself, or to do so from Windows.

Ideally, I'd like to remove GRUB entirely. Failing that, I'd like to edit the GRUB config file so that only Windows is an option. Failing that, I need to make Windows the default OS.

View 3 Replies View Related

Debian Configuration :: Restoring Boot Record After GRUB Installation?

Mar 11, 2011

I have recently installed Debian alongside Vista on the same boot menu using the GRUB booting device. Only problem is, I couldn't boot Vista at all any more, so I removed my Debian installation from that drive. But the GRUB boot record persists, I don't have the Recovery disk to restore my old system, so I have to find a way to manually remove the GRUB track and put the old record in its place. I assume there was a copy made of it by the installation program, now my only problem is to find that file and copy the content back in place (at the address at the very beginning of the drive) all that by using Linux code, since that is all I have left. Being new to this game, I have no idea how to begin writing the right command for a job like this

View 3 Replies View Related

Debian :: Restore Original Boot Record After Grub Installation?

Mar 11, 2011

A few days ago I installed my first Linux product, which is Debian 6.0, and I installed the GRUB booting device on my main boot record, as it was suggested that it was a harmless step to take. Unfortunately, some quirk in my system made GRUB believe that I had XP when in fact I have Vista, so the options I have now are to boot Debian or to boot XP which is not on my computer. In other words, I have to get rid of GRUB now, but I'm realizing that he's not such an easy customer to kick out. I have moved my Linux installation to another drive, but the old GRUB always stays in place, and my Vista is stuck there frozen for eternity. So after considering all kinds of possibilities, I have come to the conclusion that the easiest way to restore my original boot record would probably be to find its backup copy that I assume the installation program made, and to copy it back into the right address at the beginning of the disk. I don't have the Vista recovery CD, so I really have to do this manually. So now my questions are these: did the installation program make a copy of the boot track, and if so, where did he put it and under what name, and finally, what command can I use from within the Debian terminal, which is now my only tool left, to copy the content of thesaid file into the first 512 bytes of the hard drive? I know that would be a simple matter for any serious geek, I guess I must be a little rusty. Anybody feel up to it?

View 9 Replies View Related

Ubuntu Installation :: Properly Multi-booting Grub With Windows First

Mar 5, 2010

I wanted windows to appear first in my grub2 menu so I renamed the 30_os_probe file(or whatever it felename is) to 09_os_probe so that it comes before the 10 linux file, problem is whenever these files get updated the updater is unable to find the 30_os_probe file since I renamed it and recreates it... leaving me with two versions (09 and 30) with 09 being of course outdated.

The updater also fails to run update-grub and instead attempts to update grub.cfg manually... and fails. I had to manually do a sudo update-grub.

Is there any way to fix this so its all updated automatically while leaving windows the top choice? No manual intervention required beyond clicking "install updates"?

Also, is it possible to JUST have the Windows and Ubuntu choices, no Ubuntu recovery, memtest, alternative(older) kernels for Ubuntu, etc in the grub menu?

View 9 Replies View Related

Debian Installation :: Grub Rescue - Will Not Boot From Mdadm RAID - No Such Disk

Sep 19, 2014

I am running a 14 disk RAID 6 on mdadm behind 2 LSI SAS2008's in JBOD mode (no HW raid) on Debian 7 in BIOS legacy mode.

Grub2 is dropping to a rescue shell complaining that "no such device" exists for "mduuid/b1c40379914e5d18dddb893b4dc5a28f".

Output from mdadm:
Code: Select all    # mdadm -D /dev/md0
    /dev/md0:
            Version : 1.2
      Creation Time : Wed Nov  7 17:06:02 2012
         Raid Level : raid6
         Array Size : 35160446976 (33531.62 GiB 36004.30 GB)
      Used Dev Size : 2930037248 (2794.30 GiB 3000.36 GB)
       Raid Devices : 14

[Code] ....

Output from blkid:
Code: Select all    # blkid
    /dev/md0: UUID="2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb" TYPE="xfs"
    /dev/md/0: UUID="2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb" TYPE="xfs"
    /dev/sdd2: UUID="b1c40379-914e-5d18-dddb-893b4dc5a28f" UUID_SUB="09a00673-c9c1-dc15-b792-f0226016a8a6" LABEL="media:0" TYPE="linux_raid_member"

[Code] ....

The UUID for md0 is `2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb` so I do not understand why grub insists on looking for `b1c40379914e5d18dddb893b4dc5a28f`.

**Here is the output from `bootinfoscript` 0.61. This contains alot of detailed information, and I couldn't find anything wrong with any of it: [URL] .....

During the grub rescue an `ls` shows the member disks and also shows `(md/0)` but if I try an `ls (md/0)` I get an unknown disk error. Trying an `ls` on any member device results in unknown filesystem. The filesystem on the md0 is XFS, and I assume the unknown filesystem is normal if its trying to read an individual disk instead of md0.

I have come close to losing my mind over this, I've tried uninstalling and reinstalling grub numerous times, `update-initramfs -u -k all` numerous times, `update-grub` numerous times, `grub-install` numerous times to all member disks without error, etc.

I even tried manually editing `grub.cfg` to replace all instances of `mduuid/b1c40379914e5d18dddb893b4dc5a28f` with `(md/0)` and then re-install grub, but the exact same error of no such device mduuid/b1c40379914e5d18dddb893b4dc5a28f still happened.

[URL] ....

One thing I noticed is it is only showing half the disks. I am not sure if this matters or is important or not, but one theory would be because there are two LSI cards physically in the machine.

This last screenshot was shown after I specifically altered grub.cfg to replace all instances of `mduuid/b1c40379914e5d18dddb893b4dc5a28f` with `mduuid/2c61b08d-cb1f-4c2c-8ce0-eaea15af32fb` and then re-ran grub-install on all member drives. Where it is getting this old b1c* address I have no clue.

I even tried installing a SATA drive on /dev/sda, outside of the array, and installing grub on it and booting from it. Still, same identical error.

View 14 Replies View Related

Debian Installation :: Dual Boot UEFI - Grub Not Recognizing Drive

Mar 24, 2015

I've set up a dual boot system with Debian and Windows 8, both installed on their own drive, with their own boot partition. I installed eveything in UEFI-Mode with fast- and secure boot turned off. Both installations are working, as I can access them by changing the boot priority in the Bios. What I cannot achieve is to let grub boot my windows installation.

This is the output of parted -l:

Code: Select allModel: ATA Samsung SSD 840 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End    Size    File system     Name  Flags
 1      1049kB  512MB  511MB   fat32                 boot
 2      512MB   111GB  111GB   ext4
 3      111GB   128GB  17,0GB  linux-swap(v1)

[Code] .... 

As you can see, my linux install is on sda, my windows install on sdc (sdb beeing a data disk). This is the entry I made in the 40_custom file in etc/grub.d:

Code: Select allmenuentry "Windows 8.1" {
insmod part_gpt
insmod chain
set root='(hd2,gpt2)'
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
boot
}

I think this should be fine, but if I choose the windows entry wehen grub is booting, it says: error: no such partition. It's my first debian installation, and I am stuck here. Not too much of Linux experience in general.

View 12 Replies View Related

Debian Installation :: Recover Grub On A Dual Boot Machine With Encrypted LVM

Oct 16, 2015

My laptop setup is:

sda1: W7
sda2: FAT16
sda3: /boot
sda4: encrypted LVM with debian (everything besides /boot)

now I've re-installed W7 so grub was overwritten. I've tried the procedure which worked for me previously:booting with the netinst usb in rescue mode, choosing a root partition to mount, using grub-install to reinstall the grub:

Code: Select allmount /dev/sda3 /boot
grub-install /dev/sda

Now I'm on Jessie (stable), and this time this fails, and I am able to mount only sda3.grub-install doesn't exit so I'm assuming it has been replaced by `grub-installer'. also '/boot' doesnt exist so I created it manually.

Code: Select allmount /dev/sda3 /boot
grub-installer /dev/sda

The latter fails with
Code: Select all/dev/sda/proc not a directory

View 6 Replies View Related

Debian Installation :: Squeeze- Grub Can't Dual Boot -ntoskrnl.exe Error

Jun 7, 2010

I cannot count how many times I have re-installed squeeze, and do all kinds of fixes to grub, but no joy. Every time, there is this ntoskrnl.exe error, and to re-install it. I thought my WIN XP may be corrupted, so I reinstalled it, and updated it with sp3 and all updates. Then I re-installed squeeze (reformatting all partitions). At the end, the installer ask if I want to install grub to mbr. I replied yes. After reboot, only the 2.6.32.3-amd64 and the recovery kernels show up on the grub screen, no winxp.OK, I booted into squeeze kernel and looked at the /boot/grub/grub.cfg file, and there winxp is not included in /etc/grub.d/30_os-prober section. In terminal, I typed

#os-propber and it found winxp in /dev/sda1
then I typed
#update-grub

and now /etc/grub.d/30_os-prober now show winxp.I rebooted, and winxp shows on the grub screen, and I chose winxp.It came back with "ntoskrnl.exe ...error... re-install ntoskrnl..."Here are the details:

fdisk -l
root@SHUM-AMD64:/home/shum# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders

[code]....

View 14 Replies View Related

Debian Installation :: Cannot Write Grub To Boot Location - Fatal Error

Jun 10, 2011

I have been following this tutorial [URL]. When I get to the end of the installation and try to install GRUB to the /boot partition I have set up it throws a fatal error at me. No explanation other than it can't write to the specified location. I double checked all the partition settings which were the same as the tutorial then skipped the GRUB installation and finished. The only thing I can think of that might be wrong is that the 250MB partition size specified for /boot in the tutorial is too small.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved