Fedora Installation :: Cannot Boot Into 64bit - Kernel Not Loading Properly
Jun 1, 2010
I got a new laptop, this is the one: [URL] and decided that I wanted to go with Fedora instead of Ubuntu with this computer. The laptop runs win 7 64 bit so I'm trying to go with Fedora 64 but it will not boot. I first installed Fedora 12 64 bit from the DVD install and it would go to grub fine but when I boot the fedora os It just stops in the middle of the boot script. When it stops, the last 4 lines are:
I hadn't messed with it for a few weeks and yesterday I saw that 13 was out, so I downloaded and burnt the Fedora 13 64 bit CD. I popped it in, booted the computer and it did the same crap. It didn't stop at the same line but it was around a line with:
? kernel_init
So I guess the kernel isn't loading properly or something. Do ya'll think I would be better off using the 32 bit?
I am new to this forum, so apologies if this question has been asked before or is placed in the wrong section. Hey there, I am running Fedora 14 on a 64-bit system (laptop). Upon logging in, (it doesn't seem to make a difference if it is an initial log-in or returning from logging out), the top and bottom GNOME panels occasionally 'miss' loading a few things, or loads them improperly. As an example, the Notification Area may be missing, and I will have to re-add it manually to the blank spot where it should have loaded. I have also had issues with the Workspace Switcher loading improperly and the System Monitor not loading at all.To note, this does not happen every time, but it occurs often enough to become an inconvenience. More often than not I will have to log out and back in again to fix an improperly loaded section of the panel(s).
Ive loaded 64studio (hda6) grub in MBR, and fed10 grub on its partition (hda8), but from Studio it seems i cant Mount fed10 files to look at the Kernel path from MBR. (studio did not auto pick it up, like it did for Mandriva on hda7)
Does anyone know what it is ? something like kernel /boot/vmlinuz.....and Initrd(hd0,7)/boot.initrd.img .....then i can Edit menu.Lst in MBR grub.
I've downloaded 2.6.36-rc8 vanilla kernel, then I copied .config file from my current working kernel 2.6.32.21-168.fc12.x86_64, then I've configured, compiled and installed kernel like this:
Code: make gconfig make -j4 all (or make all) make modules_all make install The last command edits my grub.conf file and writes this: [Code]....
I checked my .config and ACPI, and File Systems are built into kernel and not loaded as modules... And, I have LVM but my /boot partition isn't in it, so I don't HAVE to use initrd, right? How can I boot from a vanilla kernel without initrd ?
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
I was finally able to install Fedora 11 x64 after choosing to only install packages from the repository on the install DVD. Prior to that when I had chosen tio install from the default online repositories, the install itself failed with a Python exception ( see my other post ). Now, however, once I boot after the install I eventually receive a kernel panic message, and failure. The exact same thing happened with CentOS 5.3 x64 after a flawless install. So unless someone knows what might be going on I will assume that Fedore, Red hat, and offshoots for x64 bit systems are just not for me. I have been able to successfully install the latest Mandriva and SUSE x64 Linux distros so whatever Red Hat/Fedora has done just does not work on my system.
I have a new work laptop (Dell M6400) that I currently have F10 i386 on. I would like to take advantage to the 64bit processor, but don't know if I need to completely re-install my F10, or if I just have to add the proper 64 bit kernel and applications.
I'm currently using FC 9 - 2.6.27 x86_64. (In my Hp - nx6320 laptop with- Intel centrino Duo processor). I have downloaded linux-2.6.30.2. How do I install this with i386/i686 configuration set. All that I want is a 32 bit - linux-2.6.30, because NCTUns 5.0 works only with the 32-bit kernel. I have tried following:
Code: make ARCH=i386 menuconfig After this, I see the architecture set to "X86_32 = Y" in the .config file. But later, after I run
Code: make bzImage The configuration restarts asking to select Y/N for various packages and modules. I have no much idea on what to select and what not to, in order to retain X86_32 set. I end up with the new .config file with contents as below after the make bzImage command.
Code: #X86_32 is not set X86_64 = y Again it is going to be built as a X86_64 bit kernel.
How to install the kernel as 32-bit along with the existing FC-9 64 bit kernel.
Firefox starts to load, the window appears, but then hard drive keeps running for ever and ONLY thing that can be done is to click on Close Window, which will stop hard drive and get back to the desktop.
Suggestion posted to Delete ".mozilla/firefox" folder from my home directory worked initially,but the problem reappeared some time ago.
Other applications in Ubuntu seem to work OK.
How to correct this problem permanently - other than going to a different O.S.?
I installed Drupal and there is only one site. It I access the website [url] where Drupal is installed I can easily see it functioning properly. But on internet it is not loading properly the colors etc are not visible properly.
F12 + Samba4, services smb and nmb set to run at levels 2345 - after reboot, I need to manually doservice nmb restartin order for all machines on the network to "see" the shared folders. It appears that service nmb does NOT start properly, as when above command is entered it shows "FAIL" as message for stopping the service.
I just received a new workstation from a vendor with Fedora14 supposedly installed in it. The problem is, it does not boot up properly. Although I've contacted them to resolve the problem, I thought I'd ask here to see if I can expedite things. Bottom line, the machine goes through the boot-up process, but only so far. Rather than getting to the log-in screen, I only see a white bar at the bottom of the screen, with "Fedora14" adjacent to it. Is there a way that I can get into the set of configuration menus for setting up the OS? They neglected to include the source disks with the system, if that is what is required.
When I am trying to install Fedora14_x64 It starts fine upto loading the anaconda.Then The screen goes blank.How to install Fedora14_x64 in my system.I am using Fedora12_x64 currently.
I am trying to boot Fedora15 using a USB stick. It fails to boot properly It works fine when I boot Fedora 14 using the same usb stick. I've attached some screenshots. Trying to run it on a Lenovo T500 2081CTO with an ATI graphics card.
I tried to put Avast on my 11.04 machine, it didn't work, what's worse is that now only one kernel will work properly. any time i try any kernel other than 2.6.38-9-generic(it came with the install CD)the boot process stops at different points but it's during the time that it is starting and stopping processes. oh yeah, i've tried install different linux systems and they all work with what comes with the install cd but when i try to change the kernel same problem.
Yesterday, i just got my Fedora live DVD. When i tried to boot it from my CD/DVD ROM drive, it seems to hang when it's just about to finish loading. From one of the prevous threads, one of the members said that i had to have 2 partitions on my HD. Currently, i already have 2 partitions. Can someone give me advice on what to do??
I use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
I have an Intel DG33TL MB, Intel Core 2 Quad Q9650, 8GB SuperTalent DDR2-800, and 4 Seagate 500GB hard disks. The disks are connected to a 3Ware 9650SE-4LPML and set for RAID0. I partitioned the drive in the following manner: 900GB for XP-Pro x64 (first install), 100 GB XP-Pro (installed second), and the remaining for FC10. After installing FC10 x64 using downloaded DVD .iso I am getting the following error on reboot:
Code: Reading all physical volumes. This may take a while... Volume group "VolGroup00" not found.
New install of Fedora 12 64-bit from DVD on an Optiplex 740 (AMD) with 8GB memory I had to use the mem= option to get the install past the EDD probe, but it seemed to install successfully. Now on boot it goes all the way through the "filling icon" progress meter, then switches to a completely black screen with an X pointer cursor that responds to mouse movement, but nothing else happens. Ctrl-Alt-F{2-5} do not switch to a console login, so the system's inaccessible.
The new 2.6.35.7 kernel fails to boot on my Lenovo laptop. I had previously compiled a 2.6.35 kernel with a couple of different .config files and never had it boot properly. The failure occurs very quickly and I am including the final screenshot in case that helps.
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
I've been having trouble getting the latest kernel to update, due to an error resolving dependencies. I've used yumex to remove old versions of kmod-nvidia that were fc10 specific, and gotten past that. However, when I updated the kernel, yumex reported that mkinetrd failed. Checking, the newest kernel listed in grub.conf is the one I'm using, not the one I just installed. What do I need to do to get the updated kernel properly listed and ready to use?
Here's the deal: I've done a fresh F12 install on my T61. Told the installer to Encrypt the Hard Disk. The installation went fine. The kernel was 2.6.31.5. I ran a yum update, which added another kernel - 2.6.32.11, but I can't boot from that one. The newer kernel throws a an "Uncompression error -system halted" immediately.
I downloaded 64-bit version of Fedora 11 and burned the iso on my dvd. When I rebooted the machine it booted up from the dvd but it showed an error message that kernel "image not found". And it stops there itself. Can someone show me some way except downloading the iso again?
