Fedora Installation :: Unable To Create Filesystem On FC11 Upgrade
Jul 6, 2009
I cannot seem to get past the "creating File System.." window on a laptop upgrade
Setup: Thinkpad T23 (dual boot) upgrade from fc10 using DVD iso.checked with checksum and burnt by K3b.
History/actions taken:
Burnt iso to DVD and install/upgrade froze "creating File System " froze after approximately 10 minutes.
(completely froze and had to use the power button!)
Checked disk OK on laptop, tried again, same fault.
Bought another DVD.(different die) and tried again, same fault.
Tried another laptop HD, (full install not dual boot) , same fault.
Removed partitions with fdisk, but still no luck.
Tried disk on a spare HD on my PC and it works, I get into the window allowing software selection!
Tried a "Linux Format" fc 10 disk and that works, also tried a PCLinux LXF disk which also worked.
The laptop does not report any problems at bootup and I do not not what else to try
View 11 Replies
ADVERTISEMENT
Oct 2, 2009
when i try to install fedora 11 on my laptop my Fedora 11 Preview installer crashes after attempt to create a partition. How do i overcome this problem
View 6 Replies
View Related
Jun 22, 2009
I've been running FC10 with all updates and had downloaded the FC11 DVD. Yesterday I upgraded to FC 11 using the DVD and it appeared that everything went fine. However when I tried to do ayum updateI got the following error. There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
No module named yum
install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
2.6 (r26:66714, Mar 17 2009, 11:44:14)
[GCC 4.4.0 20090313 (Red Hat 4.4.0-0.26)]
go to the yum faq at: [URL] I'm not sure what to do next. I also noticed that all my previously configured repositories are lost.
View 3 Replies
View Related
Jul 12, 2009
Just upgraded from FC10 using the DVD using upgrade option. I got all the way through the upgrade with no problems. However, upon reboot, when I get to my login screen, I sign in with my username and password but I get an error about kstartup manager. I think the gist of the message was it is missing and I think the error # was 127 (I think). KDE will not start. I also tried XFCE, but it will not start also.
What should I do?
View 2 Replies
View Related
Jun 11, 2009
I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies
View Related
Aug 2, 2009
How can I force the upgrade FC10 -> FC11 with online download? Somewhere in Software Update settings?
View 2 Replies
View Related
Nov 24, 2009
Was using preupgrade from FC11x64 to 12x64. Preupgrade caused alot of problems like /boot not enough diskspace. After some searching found the steps and preupgrade proceed happily but after reboot got kernel panic grrr.
Took 3 days to find another machine to download and burn the FC12x64 disk. So I booted via the FC12x64 disk and selected the 1st option to install/upgrade. I thought it is upgrade and so choose replace my existing linux system however it wiped out everything on the disk. I have some important data in my home directory. I think it is in LVM, not a partition like /dev/sda1. How can I recover them? Was using stock settings.
View 3 Replies
View Related
Dec 20, 2009
I installed FC11 from installation cds twice and I'm having a problem with Firefox freezing the system. The mouse cursor will move but nothing else is responsive, including mouse buttons and keyboard.I checked the media on every disc and they all check fine.I never had this problem with FC10. I tried upgrading Firefox -- with the necessary dependency upgrades too but without success.I tried to downgrade to FC10 Firefox and ran into a great big hassle with that.
View 4 Replies
View Related
Sep 12, 2009
I'm running a modified version of OpenSUSE 11.1 from the susestudio builder. I've run across a weird issue whereby gparted is unable to create anything more than an hfs filesystem.
It seems that the package libparted simply doesn't exist in any of the repositories I'm using. I am figuring this would affect what gparted is able to do, although I'm unsure since the program itself runs fine.
View 5 Replies
View Related
Jun 11, 2009
Is that possible, I mean when I upgrade F10 to F11 with yum upgrade is there a way to 'upgrade' the filesystem to ext4 for example (with the exception of boot partition)? Or I have to reinstall fedora like new?
While changing the filesystem can I do it by parts? what I mean is for example: I have 2 partitions like '/' and '/home' with ext3, so I backup data in '/home', change '/' to ext4 then mv files from '/home' to '/' and change '/home' to ext4 and finally mv those files from '/' to '/home'. Is that possible?
View 2 Replies
View Related
Oct 29, 2009
I've just upgraded from FC10 to FC11 (x86_64). Before the upgrade Firefox worked fine (it used a fair amount of ram but I typically have loads of tabs open :P ) but since the upgrade running Firefox maxes out my cpu. The whole system runs unusably slow if I have Firefox running now. I switched from KDE to LXDE and just ran Firefox to see if I could free up enough memory to save some tabs as bookmarks and close them but it's impossible (and not a permanent solution anyway). Konqueror runs blisteringly fast but with a cpu monitor running I can see starting Firefox just maxes out the cpu and it stays there, it's not just a heavy load at startup.I have 3GB ram and it's a dual core Centrino 2GHz so it's not an old system running out of resources and FF ran perfectly well under FC10.
View 5 Replies
View Related
Nov 23, 2009
Pulseaudio setup. My pulseaudio was working when I was using FC11 and it stops working after I upgrade to FC12 using preupgrade. The system sees audio device and alsa is working correctly. No audio at all (system audio and mplayer) from Pulseaudio. I am using the onboard Intel audio. The verify from the alsamixer that the volume is not muted. I also tries all the combination of profiles in the pavucontrol and in some of the profiles, I can see the output volume bar is moving, but still no sound
pulseaudio-0.9.19-2.fc12.x86_64
alsa-plugins-pulseaudio-1.0.21-2.fc12.x86_64
Attached is the pulseaudio log when playing video from mplayer.
View 14 Replies
View Related
May 10, 2010
kpackagekit warned me about a distribution upgrade to FC12in order to set things in motion i have to press the upgrade button is this action completely safe?since my FC11 is working like a charm, and i consider to upgrade to FC13, depending on the fact if i can build kernel drivers for kernel 2.6.32-,, that is still in the testing repo'smy idea is to upgrade all available packages from testing when fc11 is EOL, and i will see what happends after this upgrade, if my system crashes or whats so ever, i will install FC13.
View 9 Replies
View Related
Jul 8, 2009
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
View 4 Replies
View Related
Jan 12, 2010
I have a Broadcom wireless card in my hp dv6500z laptop, I had it all working properly in FC9 thanks to bbfuller and his post on the subject. After I upgraded to FC11 I have been unable to get it to connect.
I can see my neighbor's sites and suppose I could see my own if the SSID was allowed to broadcast but I keep that turned off. I put in all of the setting, including the network security key, but it won't connect, then when I go back and look again, the security key is not even close to what I put in; it gets changed to a huge string of characters.
I redownloaded broadcom-wl-4.150.10.5.tar.bz2.tar and followed the instruction on the post once again but no luck, which, after I thought about it, was a waste of time because if I can see other's wireless, then the card must be working. I have tried using Network Manager and not using Network Manager and still no luck...
View 6 Replies
View Related
Apr 4, 2010
Have been having my share of (nvidia) problems since last kernel update to fc11. Just can't seem to get x-server to work...
(Seems to me that I have had better luck with the 173xx legacy driver..Should I try that?...which one?..
I'm thinking: 173.14.20-1)...
Information; fc11 Leonidas i586 32 bit ..nvidia GeForce 7300 LE....ViewSonic VX922 19" LCD monitor
[root@Xray ~]# rpm -qa | grep -i nvid | sort
kmod-nvidia-190.53-1.fc11.4.i586
kmod-nvidia-2.6.30.10-105.2.23.fc11.i586-190.53-1.fc11.4.i586
nvidia-settings-1.0-3.2.fc11.i586
nvidia-xconfig-1.0-1.fc11.i586
[Code]....
Have blacklisted Nouveau in Modpobe... (Haven't done anything to grub.conf)... Have also tried to go the akmod route; but have never been able to make it work..
Have followed the instructions from Post 2 at the beginning of this thread; but I do get a message that says: "No package xorg-x11-drv-nvidia-libs.x86_64 available". I do have both rpmfusion repositories downloaded..
View 3 Replies
View Related
Feb 8, 2011
I downloaded fedora14 iso and burned it straight to a cd but on reboot, it booted from my hd. My bios is set to boot from cd first.Next I extracted the iso to a subdirectory and burned that to a cd, creating a boot disk using the img file in the [BOOT] directory. When I rebooted, I got a cursor in the top left corner of the screen and nothing else
View 3 Replies
View Related
May 17, 2010
I just downloaded the new fedora and proceed to install it into a free space of 11GB on my HDD. As such the partitioner is unable to create more than 1 partitioneven if free space is available, it reports not enough free space seen if its present. As such it can create only one of the three partitions i.e., swap or / or /home duw to which cannot proceed ahead.' Some more details me running Xp as the other OS on my system.
View 10 Replies
View Related
Aug 7, 2011
Two nights ago I installed the KDE Spin of F15 and it all went smoothly. Then, I decided to try and use Windows' bootloader (it was a dual-boot) instead of GRUB. So I booted into Windows, spun up EasyBCD, added the correct entry for Fedora, and overwrote the MBR. I rebooted and tried to boot into Fedora, only to realize that the Windows Boot Manager had a failsafe that sensed when it didn't boot into Windows, and it stopped me from booting into Fedora.
At first, I booted into my live USB and tried to get GRUB back. After a couple Konsoles full of GRUB telling me that it couldn't mount the drive and install itself, I decided I was probably doing something wrong and it would be much easier to just reinstall Fedora.
I deleted the Fedora partitions I had made earlier from Windows (because it was already running). Then I booted into my live USB and tried to install Fedora. I clicked "OK" to make a partition (that would mount at /boot) that was 500 mb. It told me there wasn't enough space, but sitting right next to one of the already installed partitions was more than 190000 mb of space. So I tried to redo the partition with 250 mb, then I tried to make the swap partition and the main one (that would mount at /). I kept getting the error. I decided maybe it was a problem with the USB, so I rebooted into Windows and reinstalled the ISO onto the USB (with unetbootin) and repeated the process, only to get the same error.
P.S- I tried to use the option to "Use Free Space" as well as doing it manually and got the same error. Also, I saw another thread where a person with my same type of compute (a Lenovo Y560) had a similar problem. It might be possible there's a hidden partition for Lenovo's purposes? Anyways, the other user's solution was to move the an extended partition somewhere. I'll be posting an fdisk soon, in case I have the same problem as the other user. The other user used GParted, but it looks like I can use Easeus too, which I already have installed.
P.P.S- Here's the fdisk in case it will help:
Code:
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
View 4 Replies
View Related
Jul 21, 2010
I burned the Fedora 13 x64 DVD, booted from it, and attempted to upgrade my Fedora 12 x64 OS. It found my previous installation than asked my what to do with my boot partition. I chose to upgrade it, rather than skip or whatever else, only to eventually be met with a message saying the partition is too small by 9M. Really ? This is a 100 MB partition. Is 100 MB now too small for a boot partition ?
View 1 Replies
View Related
Jan 8, 2009
Who has successfully upgraded going from F7 x86_64 to F9 x86_64 using the yum approach? I have had about 0% success getting everything to work correctly doing a fresh install of F9. Everything works correctly in F7( sound, firefox/flash, networking, samba, etc ), so I figure that starting with something know to work and upgrading to F9 might be a better approach that starting with F9 and having it guess.
View 7 Replies
View Related
Jan 22, 2009
It's become a tradition since I've installed FC6 on my machine: after each Fedora upgrade, the PC hangs at reboot because of a badly make initrd !
I found this post a while ago that helped me to solve the problem by rebuilding the initrd with the right librairies in it: [url]
So for each upgrade I've done the last 2 years I had to follow again these instructions to rebuild the initrd.
I've just finished the upgrade from F9 to F10 and I faced the following friendly message:
Code:
Allright, not a surprise in fact. While rebuilding the initrd I discovered there's no more /lib/i686/nosegneg/ directory in Fedora10's initrd. Therefore I reinstalled the libm-2.9.so library as follows:
Code:
Once the initrd rebuilt, I rebooted and faced a second friendly message:
Code:
I searched for posts reporting problems with segfault in ld-2.9.so but didn't find anything. So now I'm with a successfully upgraded fedora 10 system that refuses to boot.
By the way, I've done the upgrade using the netinstall CD, all the packages have been retreived online without errors and I think I've therefore the latest versions.
How to making this F10 box to start ?
View 4 Replies
View Related
Feb 23, 2009
Lately I was upgrading from F9 to F10 on my IBM thinkpad, everything looked good and in the end of the uppgrading prosess I got a messages witch told me that my upgrade was successfull and I was asked to reset the computer, but there my problems begin , after reset I only get black screen with the name name GRUB written in the up left corner of the screen and everything stopps there.
View 2 Replies
View Related
Apr 19, 2011
I was using 9.04 for a while because it was working for me, I decided to upgrade yesterday using the Upgrade button on synaptic to 9.10. Now when I boot I get an error message:
Code:
chroot: cannot execute /etc/apparmor/initramfs: No such file or directory
Mount of filesystem failed.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and re-try
I want to try to fix the problem so I do not have to do fresh installation.
View 5 Replies
View Related
Jan 25, 2009
I tried upgrading from Fedora 8 to Fedora 10 using the DVD, but I ran into a few problems.After verifying the install media, it was no longer able to detect the DVD. Annoying, but I got around this by simply rebooting and then skipping the media check.The second problem happened after I tried to "upgrade an existing installation". It gives me the error "Multiple devices with label /boot detected. Devices must have unique labels in order for you system to work. Please correct this problem before upgrading".My system's working just fine, so I'm not sure why I'm getting this error. I have a RAID-1 setup, so would that be causing the error? How do I correct this problem without wiping out my system?
View 1 Replies
View Related
Apr 20, 2009
I upgraded to fedora 10 using yum but i have a problem, the installation went fine and after rebooting i got a login screen. I typed in my user name and password and after a second it returns to the login screen. Im sure the username and password are correct. If i type in another password i get an error message. So how can i log in?
This is what i did to upgrade to Fc10:
Code:
Then i got an upgrade wizzard and selected Fedora 10 and than reboot.
In the grub menu only one kernel is present which is the Fc10 so couldn't use the old one.
I've tried to edit the kernel with single for single user that works gives me a command line but im just not experienced enough to figure out how i can use the command line to login.
View 6 Replies
View Related
Jun 11, 2009
I386 install dvd, gets to the point where it needs to resolve packages and then anaconda crashes. http://jaojbre.users.sbb.rs/anacdump.txt contains detailed log file. Any idea?
View 1 Replies
View Related
Nov 27, 2010
My system is Dell 4300S with 1.4 GHz Pentium processor, recently upgraded to 1 GB RAM,120 GB WDC1200JB hard drive Sony DRU-720A DVD/RW drive, ATT plugandshare wireless adapter with Atheros AR5001X chip, ATI Rage 128 Pro Ultra TF video card, and Actiontec V90, and 56KFlex modem (Agere System Venus). I attempted to use preupgrade to upgrade from Fedora 12 to 14 using wireless connection. It seems, that upgrade finished successfully, except I am not unable to get to a GDM login. I updated SElinux to selinux-policy-3.9.7-10 and selinux-policy-targeted-3.9.7-10, and touch /.autorelabel overnight, I was able to login using GDM once. And that is all. After I boot, after Ctrl+Alt+F4, I can login to terminal.
[Code].....
View 8 Replies
View Related
Oct 14, 2009
it's possible to use preupgrade to go directly from FC8 to FC11.
Also, I'm wondering if this will allow me to avoid formatting my hard drive or not. I'll have backups ready just in case, but was hoping maybe I could get away with not having to do the old two-step shuffle with all my data.
View 2 Replies
View Related
Apr 20, 2011
I'm not a complete newb, or a seasoned hacker. I can't figure out what's up with this, I keep getting this message when I try to apply updates. [('installing package kernel-2.6.35.12-88.fc14.i686 needs 17MB on the /boot filesystem', (9, '/boot', 16985088L))]
View 6 Replies
View Related
