I burned the Fedora 13 x64 DVD, booted from it, and attempted to upgrade my Fedora 12 x64 OS. It found my previous installation than asked my what to do with my boot partition. I chose to upgrade it, rather than skip or whatever else, only to eventually be met with a message saying the partition is too small by 9M. Really ? This is a 100 MB partition. Is 100 MB now too small for a boot partition ?
View 1 RepliesWho has successfully upgraded going from F7 x86_64 to F9 x86_64 using the yum approach? I have had about 0% success getting everything to work correctly doing a fresh install of F9. Everything works correctly in F7( sound, firefox/flash, networking, samba, etc ), so I figure that starting with something know to work and upgrading to F9 might be a better approach that starting with F9 and having it guess.
View 7 Replies View RelatedIt's become a tradition since I've installed FC6 on my machine: after each Fedora upgrade, the PC hangs at reboot because of a badly make initrd !
I found this post a while ago that helped me to solve the problem by rebuilding the initrd with the right librairies in it: [url]
So for each upgrade I've done the last 2 years I had to follow again these instructions to rebuild the initrd.
I've just finished the upgrade from F9 to F10 and I faced the following friendly message:
Code:
Allright, not a surprise in fact. While rebuilding the initrd I discovered there's no more /lib/i686/nosegneg/ directory in Fedora10's initrd. Therefore I reinstalled the libm-2.9.so library as follows:
Code:
Once the initrd rebuilt, I rebooted and faced a second friendly message:
Code:
I searched for posts reporting problems with segfault in ld-2.9.so but didn't find anything. So now I'm with a successfully upgraded fedora 10 system that refuses to boot.
By the way, I've done the upgrade using the netinstall CD, all the packages have been retreived online without errors and I think I've therefore the latest versions.
How to making this F10 box to start ?
Lately I was upgrading from F9 to F10 on my IBM thinkpad, everything looked good and in the end of the uppgrading prosess I got a messages witch told me that my upgrade was successfull and I was asked to reset the computer, but there my problems begin , after reset I only get black screen with the name name GRUB written in the up left corner of the screen and everything stopps there.
View 2 Replies View RelatedI tried upgrading from Fedora 8 to Fedora 10 using the DVD, but I ran into a few problems.After verifying the install media, it was no longer able to detect the DVD. Annoying, but I got around this by simply rebooting and then skipping the media check.The second problem happened after I tried to "upgrade an existing installation". It gives me the error "Multiple devices with label /boot detected. Devices must have unique labels in order for you system to work. Please correct this problem before upgrading".My system's working just fine, so I'm not sure why I'm getting this error. I have a RAID-1 setup, so would that be causing the error? How do I correct this problem without wiping out my system?
View 1 Replies View RelatedI upgraded to fedora 10 using yum but i have a problem, the installation went fine and after rebooting i got a login screen. I typed in my user name and password and after a second it returns to the login screen. Im sure the username and password are correct. If i type in another password i get an error message. So how can i log in?
This is what i did to upgrade to Fc10:
Code:
Then i got an upgrade wizzard and selected Fedora 10 and than reboot.
In the grub menu only one kernel is present which is the Fc10 so couldn't use the old one.
I've tried to edit the kernel with single for single user that works gives me a command line but im just not experienced enough to figure out how i can use the command line to login.
I386 install dvd, gets to the point where it needs to resolve packages and then anaconda crashes. http://jaojbre.users.sbb.rs/anacdump.txt contains detailed log file. Any idea?
View 1 Replies View RelatedMy system is Dell 4300S with 1.4 GHz Pentium processor, recently upgraded to 1 GB RAM,120 GB WDC1200JB hard drive Sony DRU-720A DVD/RW drive, ATT plugandshare wireless adapter with Atheros AR5001X chip, ATI Rage 128 Pro Ultra TF video card, and Actiontec V90, and 56KFlex modem (Agere System Venus). I attempted to use preupgrade to upgrade from Fedora 12 to 14 using wireless connection. It seems, that upgrade finished successfully, except I am not unable to get to a GDM login. I updated SElinux to selinux-policy-3.9.7-10 and selinux-policy-targeted-3.9.7-10, and touch /.autorelabel overnight, I was able to login using GDM once. And that is all. After I boot, after Ctrl+Alt+F4, I can login to terminal.
[Code].....
I cannot seem to get past the "creating File System.." window on a laptop upgrade
Setup: Thinkpad T23 (dual boot) upgrade from fc10 using DVD iso.checked with checksum and burnt by K3b.
History/actions taken:
Burnt iso to DVD and install/upgrade froze "creating File System " froze after approximately 10 minutes.
(completely froze and had to use the power button!)
Checked disk OK on laptop, tried again, same fault.
Bought another DVD.(different die) and tried again, same fault.
Tried another laptop HD, (full install not dual boot) , same fault.
Removed partitions with fdisk, but still no luck.
Tried disk on a spare HD on my PC and it works, I get into the window allowing software selection!
Tried a "Linux Format" fc 10 disk and that works, also tried a PCLinux LXF disk which also worked.
The laptop does not report any problems at bootup and I do not not what else to try
Quote:
I've upgraded to fedora12 from fedora11 using preupgrade.
The process was successfull till the first boot, where I got above error message.
I'm trying to upgrade, but have this issue: usually I download the DVD iso, run checksum, burn it, test the disk, and when found ok, I run the upgrade. Now, however, I keep getting "disk not ok" at 95% of the disk test. I have downloaded and verified the iso twice, used 2 DVD's, 2 different DVD-drives, 2 different computers and keep getting this error at 95%.
View 2 Replies View RelatedI am attempting to upgrade Fedora 12 to 13. I get an error screen that said root could not be found. Four options are given. Not sure exactly their wording, but two appear to allow you to cancel the other two warn that if you reinitialize you will wipe out all data.
I have a Vista partition and a Fedora partition. I've added the vista ntfs partition to fstab with no help. All of the partition use the long UUID form. I added the root location (root (hd0,5) to the upgrade menu item in grub.conf and that didn't work either.
I'm reluctant to proceed for fear of initializing the entire drive. I could live with installing Fedora 13 over the existing partitions.
I am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies View Relatedlast month i had ubuntu 9.04 on my pc but i formated and i install 9.10 then i formatted again with windows xp and now i want to install again the 9.10..but when i try to install at the boot ubuntu docent boot up also fedora(12),opensuse and ubuntu 9.10 but with ubuntu 9.04 everything is ok..i try to upgrade from 9.04 to 9.10 using update manager but when i restart my pc ubuntu doesn't boot up?
View 1 Replies View RelatedI cannot upgrade from 8.04. I go to the update manager, and it says everything is up-to-date. I've tried going in through terminal.
View 2 Replies View RelatedI'm currently trying to upgrade to 10.04, but I'm experiencing a problem. Currently I am encountering the following error message when trying to upgrade: "An unresolvable problem occurred while calculating the upgrade: The package 'ubuntu-desktop' is marked for removal but it is in the removal blacklist."
The message directed me to /var/log/dist-upgrade. I looked at the apt.log file and I discovered the following at the end of the file:
"Investigating ubuntu-desktop
Package ubuntu-desktop has broken Depends on libsdl1.2debian-pulseaudio
Considering libsdl1.2debian-pulseaudio 2 as a solution to ubuntu-desktop 0
[code]....
I downloaded Ubuntu 10.04 Alternate CD and tried to upgrade 8.04 to 10.04. When I run upgrade (with the option "Include latest updates from the Internet?" set to "No" ) in the "Setting new software channels" it gives this error (ScreenShot attached):
Code:
An unresolvable problem occurred while calculating the upgrade:
E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
I'm using Ubuntu 10.04 (upgraded from 9.10) and I can't find a way to upgrade to the new 10.04.1 version.
I've updated all the software sources, changed my country location to US, and even generated a new sources.list file, but my update manager never displays an option to make an upgrade to 10.04.1
Here are my current settings:
Code:
###### Ubuntu Main Repos
deb http://pt.archive.ubuntu.com/ubuntu/ lucid main restricted universe multiverse
###### Ubuntu Update Repos
deb http://pt.archive.ubuntu.com/ubuntu/ lucid-security main restricted universe multiverse
[Code].....
I have Ubuntu 10.04 and I am trying to upgrade to 10.10 but when I have the update manager check for updates it is not an option.
View 5 Replies View Relatedwhen I upgraded from 10.04 to 10.10 I lost the ability to enable effects, lost the ability to use compiz and my screen got messed up and my video card driver wasn't working forcing me to re-install it several times. Even now my system doesn't totally work how it used to in 10.04.I want to avoid that in this upgrade. I downloaded the live cd since the wire upgrade took a bunch of hours. But my concern is the graphics, I want to be able to use effects since Unity uses effects, I have unity 2d installed but it doesn't work. So somehow enabling effects is a must.
what steps do I take to make the upgrade process as smooth as possible, I've already done my app updates so my system is current, I'll disable 3rd party ppa's like before but what else? Do I have to disable my video card driver so the live cd video card driver can be installed? How do I keep my setting as is but allow for all the 11.04 goodness to be installed?Or is erasing my current Ubuntu partition and reinstalling 11.04 fresh the best option?
I am running Lucid Lynx on a Dell Inspiron 1720 laptop. Every time I try to upgrade to 11.10 (via the Update Manager) I get the below listed errors. Any suggestions are appreciated.
W:Failed to fetch http://astromirror.uchicago.edu/ubun...86/Packages.gz 404 Not Found
, W:Failed to fetch http://astromirror.uchicago.edu/ubun...86/Packages.gz 404 Not Found
, W:Failed to fetch http://astromirror.uchicago.edu/ubun...rce/Sources.gz 404 Not Found[code]....
Since 9.10 was available, I've been unable to upgrade to the next distribution. Today I actually took the time to copy down and make note of the error given. The pop-up error is this: Could not calculate the upgrade
[Code]...
I just upgraded to 10.04 from 9.10. Everything seemed to go well and it looks like everything transfered over fine except my email stuff. I was using Evolution with 9.10, but it looks like none of that is on 10.04. Not too worried about the program itself, but I would like to have kept my contacts info and a few of the emails from the last couple of days.
View 1 Replies View RelatedUpgrade from Karmic - was using EasyBCD in Vista. Tried upgrading to Grub2, reinstalling Grub - but can not boot to either. Here is my Results.txt file from [URL]
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
[code]....
I'm trying to upgrade Virtualbox but I get the following error. What can I do? I use Ubuntu Release 10.04 with Linux 2.6.32-24 generic.
View 4 Replies View RelatedI upgraded to 10.10, and grub just came back with "no wubildr", and then a "no other mode", or something like that. I dual boot xp (I used it to install wubi), and I need a few files off my linux partition. Is there a way to:recover my files within windows
skip grub and go strait to ubuntu
I have Ubuntu Mavrick installed on windows vista using wubi. it has been running smoothly since RC, when i installed it. now, after I updated using Update Manager last night I was asked to reboot. Upon rebooting i was not able to use ubuntu. the Ubuntu option is there on the windows boot menu but after i select it gruub does not appear. instead it reboots again. is there any way to fix this problem so i can use ubuntu again? if not how can i recover my ubuntu files and folders? Please help because i dont really want to reinstall after all the tweaking and stuff.
View 3 Replies View RelatedI started off on 9.10 and upgraded to 10.4 without any problems. However during the upgrade to 10.10 got asked about grub (see attachment 1& 2) and I think I should have ticked the other boxs but I didn't. I also got an error (see3) The 4th one I think is a different issue.On the restart it would only get to the purple screen before the login field appears. I presume I need to do something to the grub but have no idea what.My system is 64bit and a raid 1. The attachment 5 shows the partition arrangement I can boot into the the PC with a live (32bit 10.10) cd.
View 3 Replies View RelatedI am running 10.04 LTS inside Windowsxp.LTS is totally updated.What is more,in the settings section of update manager I have ticked to show normal releases as well.Still,update manager is not displaying "10.10 is available"Thus,unable to upgrade.
View 3 Replies View RelatedI updated my pc today, all went well no errors during upgrade. But I am unable to boot. I get the splash screen with Ubuntu and 4 coloured dots, then it goes and i get a page of txt. *starting apparmor profiles skipping profile in /etc/apparmor.d/disable: usr.bin.firefox plymouthd: ply-keyboard.c:384: ply_keyboard_watch_for_input: Assertion `keyboard != ((void*)0)' failed. *Setting sensors limits rather than invoking int scripts through /etc/init.d, use the service ( utility, e.g service s20plymouth-splash start Since the script you are attempting to invoke has been converted to an upstart job. you may also use the start ( utility, eg. start s20plymouth-splash Start: uknown job S20plymouth splash
If i leave it the screen just goes black I can get to ttyl by using ctrl&alt&f7 and log in.but thats about it startx just tells me no screens found I expect because xorg isn't used. If i go into recovery mode, failsafe graphics won't load either. So i select netroot and the enter startx which will give me a root desktop. I tried reinstalling grub, but no change. Not sure where to go from here i suspect it is something to do with plymouth? but i am no expert even tho i've been a user for 4 years