I'm running a modified version of OpenSUSE 11.1 from the susestudio builder. I've run across a weird issue whereby gparted is unable to create anything more than an hfs filesystem.
It seems that the package libparted simply doesn't exist in any of the repositories I'm using. I am figuring this would affect what gparted is able to do, although I'm unsure since the program itself runs fine.
I cannot seem to get past the "creating File System.." window on a laptop upgrade
Setup: Thinkpad T23 (dual boot) upgrade from fc10 using DVD iso.checked with checksum and burnt by K3b.
History/actions taken:
Burnt iso to DVD and install/upgrade froze "creating File System " froze after approximately 10 minutes.
(completely froze and had to use the power button!)
Checked disk OK on laptop, tried again, same fault.
Bought another DVD.(different die) and tried again, same fault.
Tried another laptop HD, (full install not dual boot) , same fault.
Removed partitions with fdisk, but still no luck.
Tried disk on a spare HD on my PC and it works, I get into the window allowing software selection!
Tried a "Linux Format" fc 10 disk and that works, also tried a PCLinux LXF disk which also worked.
The laptop does not report any problems at bootup and I do not not what else to try
I just got a new hard disk so that my "/" and "/home" partitions would be located at their own separate drives. All was well until i tried to expand my "/home" partition to fill up the entire drive that used to also have the "/" and swap partitions on there. Let me sketch the before-and-after scenario in GParted,
Before:
What actually happened after:
Gparted gave an error prompt after which i found out that the entire ext3 partition (/home) had been moved to the left but not yet expanded to the right, which is of course not a problem. However, for some reason it has labelled the entire ext3 partition as a swap partition!
I'm still running ubuntu from the usb flash drive, because i dont want to risk that the (120GB) swap area will actually be used and cause my data to be lost.
I guess my question is, can i relabel the swap partition as ext3 like it was before without formatting (ie without losing data)?
Here's the output of "fdisk -l", which doesn't show the swap area (the drive in question is "/dev/sdb"):
Code:
Whenever I try to write to /opt, /usr/src, or /usr/local, I get "permission denied."
How do I fix this? The portion of the fstab for the filesystems in question is:
Code:
/dev/sda9 /opt ext4 user,noauto,noacl 0 0
/dev/sda6 /usr/local ext4 user,noauto,noacl 0 0
/dev/sda10 /usr/src ext4 user,noauto,noacl,exec 0 0
/dev/sdf1 /mnt/hd2 ext4 user,noauto,noacl 0 0
[Code]....
I am trying to partition my unallocated part of the disc in my laptop in ubuntu 10.04 using Gparted.Here is a screenshot of my disk and its partitions:
when i select the unallocated space i can ONLY create a PRIMARY partition..the LOGICAL and EXTENDED ones are grayed out.. i want to partition this unallocated space in two or three parts, and it seems i only have one (out of the four) primary partitions left.. so i cannot create the partitions i want!
So, my GParted (Ubuntu) won't create an NTFS partition (the option is greyed out). I'm trying to create an NTFS partition to allow for a Windows 7/Ubuntu dual-boot. Everywhere I check, they suggest either creating the NTFS partition in GParted BEFORE installing Windows OR leaving it "unallocated" with the Linux partition after it.
I have tried both now, with two results:
1) GParted can't create an NTFS partition within Ubuntu 9.10.
2) On the other hand, the Windows 7 Installer says that Windows can not create a partition or find a partition when I attempt to select the "unallocated" portion.
I am trying to create a partition using gparted for my centos installation but I accidentally deleted my partition table. my partition was created on windows7 and dual boot with ubuntu. I am trying to recover it using test disk with ubuntu live cd but after I recover it still I neither can't boot on windows or Ubuntu here is the result of patition quick seart
Quote:
Disk /dev/sda - 320 GB / 298 GiB - CHS 38914 255 63
Partition Start End Size in sectors
>D HPFS - NTFS 0 32 33 12 223 19 204800 [System Reserved]
[code]....
I tried to set up my partition characteristic like this
Quote:
Disk /dev/sda - 320 GB / 298 GiB - CHS 38914 255 63
Partition Start End Size in sectors
1 * HPFS - NTFS 0 32 33 12 223 19 204800 [System Reserved
[code]....
and still can't reboot on my win7 or ubuntu
how to create extended ext3 partition using GParted? Every time I select "New" for unallocated space I can only create primary partition. Other options (extended and logical) are always greyed out.
View 5 Replies View RelatedWhen I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
Why does this happen? I am (this time) trying to install Atmel's gnu-avr toolchain. Atmel's web site gives the repository as http:www.atmel.no/avr32/suse/11.0/i586. I put that into YAST2's repository manager, and it comes back with "unable to create repository from URL..."
Why does this happen? It's hardly unique to the Atmel repository: in fact, it seems to be YAST's default behavior on ANYTHING other than the official SUSE repos.
Is there some way to fix this, or bypass it with some other installation tool, so I can get the software I need?
i m not able to create new user account to my new install of 11.2 don't know whether it occured due to update problem or some installation failure. when creation a new profile through yast it gives a warning sub-domain not started and quits however a new user get added through cli but with no profile of its own. that user cant log into gui enviroment and when he/she logs through cli it automatically tranfers it profile to "/"(i.e root) i m using kde4.3
View 9 Replies View RelatedI have this hard drive with ~ 500 Go of unassigned space. I'd like to create a partition to store some backups but Yast 2 expert partitioner refuses to add any partition on this drive. A window pops up telling me:It is not possible to create a partition on /dev/sda/I am working in opensuse 11.3 (recently upgraded from opensuse 11.2)Linux linux-vytp 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 i686 i686 i386 GNU/Linux
View 7 Replies View RelatedI have a small installation problem with openSUSE 11.2 I have read the relevant stuff in the forums for new users. I have downloaded openSUSE-11.2-DVD-i586-iso and verified the file using MD5. I am currently running windows XP (SP1) on a Fujitsu Siemens V1000 laptop andI am trying to install linux from my hard drive and not from a DVD drive.
The path to the downloaded file on my windows partition is: e:/OpenSuse/openSUSE-11.2-DVD-i586.iso I have initialised installation and selected sda6 as the partition where the sourcefile is located. and when prompted for the directory, I typed " /OpenSuse/openSUSE-11.2DVD-i586.iso " The installations then proceeded through to "Initialising Package Manager" upon which I get the following message:
" Unable to create repository from url' iso:/? iso=openSUSE-11.2-DVD-i586.iso&url=hd:/OpenSuse?device=/dev/sda6"
DETAILS: Failed to mount iso:///?iso=openSUSE-11.2-DVD-i586.iso & url=hd:/OpenSuse?device=dev/sda6 on: Unable to find iso filename on source media.
History: - File:/openSUSE-11.2-DVD-i586.iso not found on medium 'hd:///OpenSuse?device=dev/sda6'
There is an option to try again at which point an additional dialog box appears and I have the opportunity to change things. Other than that, the only option is to cancel and terminate the installation. I've tried the process around 3 times, but if I'm doing the same thing then not surprising I'm getting the same result.
I want to install SLES11 with my usb key but I couldn't to make it bootable. Because my server are only a cdrom drive, not dvd... I read the following document : SuSE install from USB drive - openSUSE but it doesn't run! So I can mount/umount the usb and linux could see him:
Code:
mount /dev/sda /mnt/usb
but the fsck.vfat doesn't run :
Code:
fsck.vfat /dev/sda1 open /dev/sda1:No such file or directory
Trying to install on an older Dell D600 laptop. During the install process on the system probing screen I get the following error message: Unable to create repository from URL 'cd:/'
Then it provides some details.Details: [|] Valid metadata not found at specified URL{s} I'm not a computer guy - just trying to set up for my son.
I am trying to add a few additional repositories to SLES 11 64-bit but I can't seem to get them added. I am trying to add Index of /repositories/server:/database but I get the error "Unable to create repository from [URL]... Try again? So I browsed that repository and then tried to add Index of /repositories/server:/database/SLE_11 but still got the error message with this new URL listed instead. I tried just the 11.2 repository and it worked - Index of /distribution/11.2/repo/oss/suse.
How or what do I need to do in order to get Index of /repositories/server:/database added to my repository?
I'm new here, an Ubuntu user who would try Opensuse for a while. That is if I'm able to launch the thing !
I'd like to create a Live Usb Stick to test it and install it if I like it but it doesn't seem to work.
I tried the website method, using "Win32DiskImager.exe" but the program doesn't work for me (WinXP) : it looks like it's writing but when the "Done" message is prompted, I'm unable to access the usb key, Windows says it's not formatted. That doesn't look right...
I tried with LinuxLive Usb Creator but the boot process fails and Universal-Usb-Installer doesn't offer an Opensuse option.
Is there another way to install the distribution on an USB stick ? I could still try through Ubuntu but that would be quite surrealistic.
I've got 3 extra disks on OpenSuse 11.2 - all the same size. I've created a partition on all of them as type 0xFD. If I then try and add raid in yast I get "There are not enough suitable unused devices to create a RAID."
View 9 Replies View RelatedWhatever I do, I get this:
Code:
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
I'm running OpenSuse 11.0 in a lamp configuration with Apache 2. I configured Apache with the .conf files instead of YAST because I am running virtual hosts (that's another story).
My problem is that my server will not render the pages unless the permissions are set to 775 which I know is not necessary. This is also causing a problem because I am trying to install WordPress onto the server. WordPress will run, but it unable to upload images because it cannot create the directories required.
Apache2 is running as 755 with root as owner and www as group. I changed the owner of the htdocs sub-directories to myself, and created a group that has permissions to write to the directory. WordPress runs as my user and has the same permissions (775).
I have the following problem on fedora 12, x64 amd; I have installed fedora 12 from a live cd, whit custum partition tables (no lvm or somting like that). my sceam is (on a single 80 gb maxtor sata disk only 1 system, clean install):
/
/home
swap
Notitng more (not needed also). The installation was successfully. No problems on the install part. ALs no problems on the ugprade part. I installed the rest using yum groupinstall. When i want to add the extra 4 disks (all samsung 1 tb spinpoint sata) that i have for my backupdata, non of the partiotionprograms can recognise. If i do; moun /dev/sdb1/ /media/sdb1, it says that i need to add the file system. well, by some sort of misstake, i could find a workaround for this. When start gparted, select on of the samsung disks, select any of the flags in gpart, remove the flag and give it a ok, gpart can read the amount of data thats used. After that i ame able to mount whit a simple mount /dev/sbd1 /media/sdb1 command. When i use this command: hdparm -z /dev/sdb1, i can mount the disk afterwards, whitout problems. Of course, i need to add them als to my /etc/fstab file, so they automount each time at boot.........
I just installed a dual boot of ubuntu with XP on my laptop. I'm planning on deleting XP altogether and keeping ubuntu. Now, as I understand the best way to do this is to go to GParted, delete the ntfs partition, and format it to ext3. Does this sound right? Now the problem is I can't seem to get GParted installed. I go to the terminal window and type sudo apt-get install gparted but it doesn't work. I get the following messege.
Reading package lists... Done
Building dependency tree
Reading state information.. Done
E: Couldn't find package gparte
Running latest Ubuntu; dual boot with Vista - Ubuntu is the default. Acer laptop, twin core 2500 CPU, 3 gig ram, 500gb HD. It came with that HDD partitioned into 2 x 250gb (approx) Running Vista.
I would like to re-install to eliminate all my mistakes. I would also like to give Linux a major size partition. But unable to download G Parted (times out after running happily for 20 or so mgb - it just stops. Tried at least 3 times - twice under Ubuntu and once via Vista.
I currently have a server setup in a perfect way for my specific network. Is there a way that I can mirror the server EXACTLY to a CD that will install all my configurations and the like upon CD boot?
View 5 Replies View RelatedI am attempting to use SuseStudio "preload" and "live" .iso images and the instructions at SDB:Live USB stick - openSUSE to create a bootable USB drive.dd_rescue ends after the expected amount of time--without reporting errors--yet "fdisk -l" reports that the device does not contain a valid partition table. The USB key does not boot and appears to have no data.
For what it's worth, my build host is Gentoo on 2.6.39, and I have the latest dd-rescue available. The USB disk is a PNY attache 4GB and works fine with any ISO's supported by unetbootin. The only other bare metal I have here is a netbook running Mepix, so I can't make use of solutions that start with "Boot your existing OpenSuse workstation
I get the error: Could not start process Unable to create io-slave: klauncher said: Unknown protocol 'magnet'.
View 3 Replies View RelatedI have trouble to install gparted on centos55
yum can't find gtkmm-2.4
without it stops!
checking for GTKMM... configure: error: Package requirements (gtkmm-2.4 > 2.8 ) were not met:
No package 'gtkmm-2.4' found
[code]...
I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this:created a single partition withfdisk /dev/sdc (and some more commands in the interactive session that follows)formatted the partition withmkfs.msdos /dev/sdc1If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized.How do I create a FAT32 file system which can actually be used in windows?edit:I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.
View 2 Replies View RelatedIs there a way that I can use my Linux ext4 file system, as such and then use it on some other computer.I have a dual-boot of Windows 7 and Ubuntu 10.04 and my partition table looks like this:My question might not be clear, so explaining it with an example.Can I copy my Linux partition on a flash drive and then use it on a different PC, with or without any need to install Ubuntu on new PC, by simply booting from the copied ext4 partition.This way, I can easily port my Ubuntu packages and other applications, settings etc. from one PC to other
View 1 Replies View RelatedI am installing Ubuntu 9.10 on my computer and I get the following error:
"the ext4 file system creation partition #2 of Serial ATA RAID nvidia_bjfefgci () failed"
I followed the following instructions to prepare partitions [URL] and allocated 10,000 MB for swap, 245,000 MB for the one with / mount point and 245,000 MB for the one with /home mount point. I have two 250GB HDDs.