Fedora X86/64bit :: FC11 Upgrade Made Firefox Max Out Cpu?
Oct 29, 2009
I've just upgraded from FC10 to FC11 (x86_64). Before the upgrade Firefox worked fine (it used a fair amount of ram but I typically have loads of tabs open :P ) but since the upgrade running Firefox maxes out my cpu. The whole system runs unusably slow if I have Firefox running now. I switched from KDE to LXDE and just ran Firefox to see if I could free up enough memory to save some tabs as bookmarks and close them but it's impossible (and not a permanent solution anyway). Konqueror runs blisteringly fast but with a cpu monitor running I can see starting Firefox just maxes out the cpu and it stays there, it's not just a heavy load at startup.I have 3GB ram and it's a dual core Centrino 2GHz so it's not an old system running out of resources and FF ran perfectly well under FC10.
View 5 Replies
ADVERTISEMENT
Jun 16, 2009
Ive installed fc11 on my laptop (IBM lenovo R400). My work has a proxy which we must go through. I have set the proxy addresses in System Settings->Network Settings-> proxy. I have also run export [URL].. All seems to be ok, yum works from the command line, konquer goes out to the net just fine. However firefox wont connect to the internet no matter. The only way at the moment is to manually set the proxy in firefox.This doesnt seem right? Surely FF should pick up the system proxy? Does anyone have any ideas about this one?
View 3 Replies
View Related
Dec 20, 2009
I installed FC11 from installation cds twice and I'm having a problem with Firefox freezing the system. The mouse cursor will move but nothing else is responsive, including mouse buttons and keyboard.I checked the media on every disc and they all check fine.I never had this problem with FC10. I tried upgrading Firefox -- with the necessary dependency upgrades too but without success.I tried to downgrade to FC10 Firefox and ran into a great big hassle with that.
View 4 Replies
View Related
Nov 10, 2009
Today I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
View 2 Replies
View Related
Sep 28, 2009
I need to develop application for 32 bit environment.
Before to install FC11 64, I used FC 9 and FC 10 i386 version without any issues.
I'm lookking for a tutorial about use 32 bit development environment in a 64 bit OS.
How or where I can setup FC11 for this features.
View 2 Replies
View Related
Nov 5, 2009
I was trying to install the android sdk so I can write some apps and play around on a new droid phone i hope to get tomorrow. I had 64bit FC11 installed but the android stuff is only 32bit. I needed to install a bunch of the 32bit libs to get this to work. I installed FC11 64 bit. This cuased problems because the android stuff is 32bit. I couldn't get it to launch so I had to install the 32 bit libraries as well. A lot of the libraries could be removed but I think they will be helpful and useful in other stuff as well.
After installing these just follow the normal android install. I had another problem with the android install because the Ganymede Update Site was not checked so it wouldn't download the updates for the eclipse software. In the Software Updates and Addons window click Manage Sites, check Ganymede Update Site. Here is the link if you have to add it.[URL]..# instruction to get 32 bit android stuff in 64 bit FC11 Add an "rpm" Macro. You'll need this later or it will be hard to tell your rpm versions apart.
Add the following line to the "/etc/rpm/macros" file:
%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}
Code:
[stoggy@localhost][~]
[10:13 AM]$: echo "%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}" | sudo tee -a /etc/rpm/macros
%_query_all_fmt %%{name}-%%{version}-%%{release}.%%{arch}
[Code]...
View 5 Replies
View Related
Dec 3, 2009
I have installed last updates about 3 days ago. After this Fedora kernel 2.6.30.9-99.fc11.x86_64 does not start.booting it the last message I see"ADDRCONF(NETDEV_UP):wlan0: link is not ready" then it stops. I have to boot with a previous kernel version 2.6.30.9-96.fc11.x86_64.
View 2 Replies
View Related
Apr 7, 2010
I have programs that work in FC10 and FC12, but when I run them on FC11, i get behaviour that is very similar to a deadlock. They don't crash or anything. It just seems that all program output stops at one point and never resumes. I am wondering if FC11 has any known threading issues that one may need to know about before trying to use it to run their software from FC10 or FC12. Maybe something in the way that threading is handled differently from FC10 or FC12 that is not necessarily a problem, but just needs to be kept in mind when writing code for FC11.
View 10 Replies
View Related
Sep 22, 2009
How do I get java plugin to work in firefox 3.5.3 (default install of fc11 x86)64)? I removed the iced tea java completely. I installed the sun java rpm, but I cannot figure out where to link the plugin to. The firefox directory (listing below) has no plugins directory.
ls /usr/lib64/firefox-3.5.3/
application.ini chrome extensions LICENSE README.txt updater.ini
blocklist.xml components firefox modules run-mozilla.sh
browserconfig.properties defaults icons old-homepage-default.properties searchplugins
[root@dt-dan tmp]# find /usr/lib64/firefox-3.5.3 -name plugins
View 6 Replies
View Related
Dec 16, 2009
Is there a repo that I can add to get firefox 3.6 beta? I am on Fedora 11.
View 14 Replies
View Related
Dec 30, 2009
i used to be able to watch music videos from a local radio station website using firefox and mplayer with fc11. maybe the solution is to upgrade to fc12, since it seems to work fine on the pc with fc12, but maybe the problem is something easy to fix, and i can wait awhile before getting everything up on fc12.. -( also, with fc11, i can play the same videos using a newly installed version of google chrome. i am just trying to find out what causes this type of error and how i can fix it. if i go to www.kzsn.com and select the "on demand" tab, then select a video, i should see mplayer open up and the video play - i don't get the black box and no video, no sound.. as stated above, this works fine using google chrome, or using another pc with fc12. this website also has some videos that play via flashplayer. they also did not play in fc11 with firefox, but i was recently able to get them to work by downgrading to a previous version of shockwave (found that in another post). not sure if this has anything to do with the problem i am having, but thought i would mention it, just in case.. only other thing i can't seem to do with any release of fc (maybe linux in general) is watch movie trailers from the apple website (which used to work fine) - was wondering if anyone else can with fc11 or fc12?
View 14 Replies
View Related
Aug 15, 2009
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
View 4 Replies
View Related
Jun 22, 2009
I've been running FC10 with all updates and had downloaded the FC11 DVD. Yesterday I upgraded to FC 11 using the DVD and it appeared that everything went fine. However when I tried to do ayum updateI got the following error. There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
No module named yum
install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
2.6 (r26:66714, Mar 17 2009, 11:44:14)
[GCC 4.4.0 20090313 (Red Hat 4.4.0-0.26)]
go to the yum faq at: [URL] I'm not sure what to do next. I also noticed that all my previously configured repositories are lost.
View 3 Replies
View Related
Jul 12, 2009
Just upgraded from FC10 using the DVD using upgrade option. I got all the way through the upgrade with no problems. However, upon reboot, when I get to my login screen, I sign in with my username and password but I get an error about kstartup manager. I think the gist of the message was it is missing and I think the error # was 127 (I think). KDE will not start. I also tried XFCE, but it will not start also.
What should I do?
View 2 Replies
View Related
Nov 23, 2009
Pulseaudio setup. My pulseaudio was working when I was using FC11 and it stops working after I upgrade to FC12 using preupgrade. The system sees audio device and alsa is working correctly. No audio at all (system audio and mplayer) from Pulseaudio. I am using the onboard Intel audio. The verify from the alsamixer that the volume is not muted. I also tries all the combination of profiles in the pavucontrol and in some of the profiles, I can see the output volume bar is moving, but still no sound
pulseaudio-0.9.19-2.fc12.x86_64
alsa-plugins-pulseaudio-1.0.21-2.fc12.x86_64
Attached is the pulseaudio log when playing video from mplayer.
View 14 Replies
View Related
May 10, 2010
kpackagekit warned me about a distribution upgrade to FC12in order to set things in motion i have to press the upgrade button is this action completely safe?since my FC11 is working like a charm, and i consider to upgrade to FC13, depending on the fact if i can build kernel drivers for kernel 2.6.32-,, that is still in the testing repo'smy idea is to upgrade all available packages from testing when fc11 is EOL, and i will see what happends after this upgrade, if my system crashes or whats so ever, i will install FC13.
View 9 Replies
View Related
Jun 11, 2009
I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies
View Related
Jul 6, 2009
I cannot seem to get past the "creating File System.." window on a laptop upgrade
Setup: Thinkpad T23 (dual boot) upgrade from fc10 using DVD iso.checked with checksum and burnt by K3b.
History/actions taken:
Burnt iso to DVD and install/upgrade froze "creating File System " froze after approximately 10 minutes.
(completely froze and had to use the power button!)
Checked disk OK on laptop, tried again, same fault.
Bought another DVD.(different die) and tried again, same fault.
Tried another laptop HD, (full install not dual boot) , same fault.
Removed partitions with fdisk, but still no luck.
Tried disk on a spare HD on my PC and it works, I get into the window allowing software selection!
Tried a "Linux Format" fc 10 disk and that works, also tried a PCLinux LXF disk which also worked.
The laptop does not report any problems at bootup and I do not not what else to try
View 11 Replies
View Related
Jul 8, 2009
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
View 4 Replies
View Related
Jan 12, 2010
I have a Broadcom wireless card in my hp dv6500z laptop, I had it all working properly in FC9 thanks to bbfuller and his post on the subject. After I upgraded to FC11 I have been unable to get it to connect.
I can see my neighbor's sites and suppose I could see my own if the SSID was allowed to broadcast but I keep that turned off. I put in all of the setting, including the network security key, but it won't connect, then when I go back and look again, the security key is not even close to what I put in; it gets changed to a huge string of characters.
I redownloaded broadcom-wl-4.150.10.5.tar.bz2.tar and followed the instruction on the post once again but no luck, which, after I thought about it, was a waste of time because if I can see other's wireless, then the card must be working. I have tried using Network Manager and not using Network Manager and still no luck...
View 6 Replies
View Related
Apr 4, 2010
Have been having my share of (nvidia) problems since last kernel update to fc11. Just can't seem to get x-server to work...
(Seems to me that I have had better luck with the 173xx legacy driver..Should I try that?...which one?..
I'm thinking: 173.14.20-1)...
Information; fc11 Leonidas i586 32 bit ..nvidia GeForce 7300 LE....ViewSonic VX922 19" LCD monitor
[root@Xray ~]# rpm -qa | grep -i nvid | sort
kmod-nvidia-190.53-1.fc11.4.i586
kmod-nvidia-2.6.30.10-105.2.23.fc11.i586-190.53-1.fc11.4.i586
nvidia-settings-1.0-3.2.fc11.i586
nvidia-xconfig-1.0-1.fc11.i586
[Code]....
Have blacklisted Nouveau in Modpobe... (Haven't done anything to grub.conf)... Have also tried to go the akmod route; but have never been able to make it work..
Have followed the instructions from Post 2 at the beginning of this thread; but I do get a message that says: "No package xorg-x11-drv-nvidia-libs.x86_64 available". I do have both rpmfusion repositories downloaded..
View 3 Replies
View Related
Aug 2, 2009
How can I force the upgrade FC10 -> FC11 with online download? Somewhere in Software Update settings?
View 2 Replies
View Related
Nov 24, 2009
Was using preupgrade from FC11x64 to 12x64. Preupgrade caused alot of problems like /boot not enough diskspace. After some searching found the steps and preupgrade proceed happily but after reboot got kernel panic grrr.
Took 3 days to find another machine to download and burn the FC12x64 disk. So I booted via the FC12x64 disk and selected the 1st option to install/upgrade. I thought it is upgrade and so choose replace my existing linux system however it wiped out everything on the disk. I have some important data in my home directory. I think it is in LVM, not a partition like /dev/sda1. How can I recover them? Was using stock settings.
View 3 Replies
View Related
Jun 6, 2010
tried install kchmviewer (5.1) from slackBuilds, but it seems like it's not compatible with slackware13.0 64bit. Also tried to install firefox chm reader add on, but its also 32bit available only! Has anyone installed any kinda of chm reader on slackware 13.0 64bit.
View 8 Replies
View Related
Sep 26, 2010
New gateway laptop with a 330M nvidia card and windows 7. I partitioned the drive and made a dual boot with the 64bit 10.04. Everything seemed to be running fine. I installed the recommended drivers for the nvidia card (and also ran an update). I rebooted. Now I get the same thing whether in recovery mode, normal boot or even to a liveCD, first ubuntu with the five dots (with an odd green halo around them) then a few screens flash by and then blackness.
None of the f keys do anything, nor does holding shift during the boot and ctrl+alt+anything does not have an affect except ctrl+alt+delete will shut down still. Once in my frustrated button bashing I did somehow get a stretched out window saying there seems to be some graphics problem, from there I did get to a somewhat normal looking desktop. I didn't to do anything then, foolishly thinking I could do it again in the future (for some presumably unrelated reason I could not get online = no updates and no Internet help) I haven't gotten back there since.
View 8 Replies
View Related
Jul 27, 2009
I understand that there are a few posts regarding this issue but for some reason I still can't get Firefox to stop freezing. And it freezes the whole machine!! I couldn't really find Firefox v 3.0.11 to download. I kept getting redirected to the newest version that doesn't work.
View 14 Replies
View Related
Jul 20, 2010
everything else seems well with my FC13-x86-64 except firefox (3.6.4 and earlier versions too) VERY frequently hangs the whole system. only the mouse still working, keyboard not responding to ctrl-alt-del, ctrl-alt-function or any other key and even num-lock won't turn the led on. system is still remotely accessible through ssh so I can issue a reboot. same thing may have occurred with thunderbird but only once or twice and probably firefox was also running then. no problems so far with google chrome (but I have no flash plugin for that). FC5-x86-32 on my old PC has never had any of these problems.
View 2 Replies
View Related
Jan 5, 2011
Here's how to install latest Firefox on a 64 bit system (leaving your old firefox install untouched):
1. Get the latest Firefox tarball (64 bit) from ftp://ftp.mozilla.org/pub/firefox/releases/ and save it to whereever you like.
2. Make a new directory in /usr/lib64 and untar it there
Code:
3. We want to create a new user profile for Firefox 4. So start Firefox 4 profilemanager and create one.
Code:
Name the new profile whatever you like, I created a new profile named FF4b for example. Also before quitting make sure you click on the "default" profile so that you don't mess up your existing Firefox install.
4. You can now start Firefox 4 with the new profile:
5. If not already installed download flash player square plugin (64 bit) from [url]
Code:
Now you need to go to your .mozilla folder in your home directory and create a symlink for the flash plugin.
Code:
Now look for a folder which is associated with the firefox profile you created earlier. The folder name should end with the name you created it with. Mine was cay67zed.FF4b for example. Cd to that directory:
Code:
Make a plugins directory and put the symlink there:
Code:
If you want, you can create a launcher for Firefox 4 on your desktop or taskbar with the following command option:
Code:
View 1 Replies
View Related
Feb 13, 2011
how to run a java application on a 64 bit Firefox install on Fedora, but I didn't find any simple and direct way to do it. So I'll post this here, hoping that people who search for this problem can easily find this really quick solution.
1-> on the terminal do the usual su -
2-> yum install jre
3.> make a link in /home/your_name/.mozilla/plugins/ folder to the file located at /usr/java/jre1.6.0_23/lib/amd64/libnpjp2.so
(just select the file, press ctrl+shift and drag it to the plugins folder)
4-> go to http://java.com/en/download/installed.jsp from firefox and test your install
Piece of cake, but it doesn't show up in search engines that easily when I look for: jre firefox 64 plugin fedora Granted that many tutorials mention the linking method, but most either tell you to install the binary/rpm from the java site or even installing the 32bit version for older fedoras... yum makes it so much easier.
View 10 Replies
View Related
Feb 15, 2010
will firefox 3.6 be made available as an update? If not is there anything special I need to know before installing it myself i.e. will flash still work?
View 5 Replies
View Related
