Fedora Installation :: Unable To Login After Fc8 - Fc10 Upgrade
Apr 20, 2009
I upgraded to fedora 10 using yum but i have a problem, the installation went fine and after rebooting i got a login screen. I typed in my user name and password and after a second it returns to the login screen. Im sure the username and password are correct. If i type in another password i get an error message. So how can i log in?
This is what i did to upgrade to Fc10:
Code:
Then i got an upgrade wizzard and selected Fedora 10 and than reboot.
In the grub menu only one kernel is present which is the Fc10 so couldn't use the old one.
I've tried to edit the kernel with single for single user that works gives me a command line but im just not experienced enough to figure out how i can use the command line to login.
View 6 Replies
ADVERTISEMENT
Jan 23, 2010
After the Upgrade of my Fedora Insatallation (FC 10 => 12) I have some problems with Gnome and the Login via console. The system actually boots fine and all kind of services like Postfix, IMAP, Samba, SSHD, Apache, etc. are avialable normally.
If I try however to work directly on the server I only see the completed Fedora progress icon and not as hoped for, the Login to Gnome. Also the attempt to change to a plain console with ALT-CTRL-F1 fails.
Since actually everything seems to work quite fine, I am somewhat helpless, according to should I look for, to get Gnome and the Console Login working again.
View 8 Replies
View Related
Nov 27, 2010
My system is Dell 4300S with 1.4 GHz Pentium processor, recently upgraded to 1 GB RAM,120 GB WDC1200JB hard drive Sony DRU-720A DVD/RW drive, ATT plugandshare wireless adapter with Atheros AR5001X chip, ATI Rage 128 Pro Ultra TF video card, and Actiontec V90, and 56KFlex modem (Agere System Venus). I attempted to use preupgrade to upgrade from Fedora 12 to 14 using wireless connection. It seems, that upgrade finished successfully, except I am not unable to get to a GDM login. I updated SElinux to selinux-policy-3.9.7-10 and selinux-policy-targeted-3.9.7-10, and touch /.autorelabel overnight, I was able to login using GDM once. And that is all. After I boot, after Ctrl+Alt+F4, I can login to terminal.
[Code].....
View 8 Replies
View Related
Jun 22, 2009
I've been running FC10 with all updates and had downloaded the FC11 DVD. Yesterday I upgraded to FC 11 using the DVD and it appeared that everything went fine. However when I tried to do ayum updateI got the following error. There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
No module named yum
install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
2.6 (r26:66714, Mar 17 2009, 11:44:14)
[GCC 4.4.0 20090313 (Red Hat 4.4.0-0.26)]
go to the yum faq at: [URL] I'm not sure what to do next. I also noticed that all my previously configured repositories are lost.
View 3 Replies
View Related
Feb 6, 2009
What is the best method to upgrade Fedora from 8/9 to 10? I have the DVD, and whenever I try to boot from the DVD it locks up the PC after selecting the default language stuff. I've run the media check on the DVD, and it passes with no problems. I am behind a firewall and for some reason the configuration is not allowing YUM to get through the firewall, but Firefox can get through (I have another post for this issue).
View 4 Replies
View Related
May 4, 2009
I tried doing an upgrade straight from fc5 to fc10. The upgrade seemed to go all right but once it was completed I've noticed some issues. My main issues are these:
1. After the upgrade all my desktop icons have disappeared and I'm not sure how to recover them. (this applies to all user account on a home machine)
2. When I click the right mouse button on the desktop I get no context menu but I do get the menu when I right click on my top or bottom menu bars.
3. When I try to launch any applications, games, etc., I see the icon show up in the bottom menu bar for a few seconds but then it disappears and the application never launches.
Those are the primary problems I'm encountering right now. I know the files in the home directories are still there (I did CTRL-ALT-F2 into a terminal and logged in as root. Normally I would've done CTRL-ALT-F1 but when I did I saw acpid messages and no prompt.) I've looked through the forums here but nothing I came across quite seemed to fit my needs.
View 7 Replies
View Related
Aug 2, 2009
How can I force the upgrade FC10 -> FC11 with online download? Somewhere in Software Update settings?
View 2 Replies
View Related
Apr 20, 2009
Trying to install FC10 on an older Dell GX150 machine, and I get to the point where the graphical install app loads, but I am not able to see any text on the screen, other than the back/next buttons, and when I click on next, I can see that it goes to a new screen where it looks like it's asking for some text input, but I can't decipher what it's asking for, and if I try to type in the box, nothing happens.
I think I read somewhere on here about using a different boot option to get FC10 to work in a Virtual PC, but not sure if it would apply here (and can't seem to find that thread anyway!) I am booting off the FC10 DVD, and can get to the menu to install/upgrade, rescue, boot locally, or test memory. If I hit TAB, I can edit the boot option - I just need to know what to put in there to get this to work!
View 4 Replies
View Related
Jan 26, 2010
I'm trying to move an existing FC10 install (created by someone else) from a 160GB WD1600AAJS SATA disk to a 160GB WD1600AAJB PATA disk (cursed trend of horizontally mounting SATA connectors at the end of the motherboard means the latest rev mobo doesn't fit in our enclosure!). I've used DD to copy the disk image from one to the other, but when attempting to boot, I get the following error:
Code:
Unable to access resume device (UUID=946f216f-0c24-4b02-a996-f42059970de7)
mount: error mounting /dev/root on /sysroot as ext3: no such file or directory
That particular UUID maps to sda2, which is the swap partition. Interestingly, both the SATA and PATA disk come up as /dev/sda on the motherboard. I kind of grok that the UUIDs are substitutes for directly naming the disks, and that they're referred to in fstab, initrd-2.6.27.12-170.2.5.fc10.i686.img, and in /dev/disk/by-* I'm guessing the problem is that the GUIDs (at least the one for swap) are no longer the same. How are they assigned to the partitions during boot?
I tried doing
Code:
swapoff -a
mkswap /dev/sda2
swapon -a
and put that new GUID in fstab and into initrd-* (using some steps I found elsewhere on how to gunzip/rezip it).At that point, I get a kernel panic on boot
Code:
Kernel panic - not syncing: CFS: Unable to mount root fs on unknown-block(0,0)
So I'm guessing that the other UUUDs have changed as well and I need to update them. How would I figure out what they are? I suppose I could change the references to /dev/sda*, but I didn't build this original image and I'm thinking whoever did had a good reason to go with UUIDs.
View 10 Replies
View Related
Mar 27, 2009
I recently upgraded from FC7 to FC10 (Also, the Kernel from 2.6.22.9 to 2.6.27.19).I did the upgrade through Yum (First installed the fc10 rpms, then did yum upgrade).Now the new Kernel won't boot.These are the options in GRUB for the new Kernel
Code:
root(hd0,1)
kernel /boot/vmlinuz-2.6.27.19-170.2.35.fc10.x86_64 ro root=LABEL=/ rhgb debug
[code]....
View 1 Replies
View Related
Feb 14, 2010
I am getting a problem when login into FC10. It boots correctly an shows the login screen; then, when typing my user and passwd goes to the desktop and shows a KERNEL FAILURE. At this moment, most of the times the PC is blocked and doesnt works any more. One time has continued working without problems.
After the las failure, my system log has this info:
Code:
I have checked my hard disks (fsck) y every thing looks fine. However, i dont know how to fsck the VolGroup0. I cant'get it unmounted.
Code:
View 1 Replies
View Related
Mar 26, 2009
just as the title states i need to upgrade my os from fc4 to fc10 first let me say i have no physical access to the box. all i have is root ssh access to it. So i need to know the best way of upgrading that will be safe. before i do the upgrade the server will be backed up so i will not loose any files. if the upgrade fails the data center will reload the os with what i need on it. but i would rather not have to format.
View 6 Replies
View Related
Jun 13, 2009
After upgrading to F11 I have had a few problems with some applications most like miro I was able to fix by using yum remove and then reinstalling. It appears that after updating some applications have stayed with the fc10 versions despite fc11 versions being available.
yum list | grep fc10 | grep installed
anthy.i386 9100h-4.fc10 installed
compat-db45.i386 4.5.20-5.fc10 installed
cronie.i386 1.2-8.fc10 installed
[code]...
View 14 Replies
View Related
Oct 20, 2009
I recently upgraded my x86_64 system from FC8-FC10 using Pre-Upgrade, and here I got some help fixing all the package conflicts that resulted. Following the first reboot after this massive package update, it appears DNS doesn't work in some apps.
I could ping www.yahoo.com, and nslookup www.yahoo.com resolved the name, but firefox and links couldn't. Typing the ip addr that nslookup gives for www.yahoo.com works fine in both firefox and links. Something's obviously wrong with DNS.
I found a workaround for Firefox which is to browse to about:config and set network.dns.disableipv6 = true. Firefox started resolving names after that.
But then I noticed yum is DNS incapable as well. I don't know how to fix it. Here's what I get:
Code:
[~]$ sudo yum update
Loaded plugins: allowdowngrade, refresh-packagekit
http://linuxdownload.adobe.com/linux/i386/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
[Code]....
Does anyone have any additional info on workarounds or fixes for this DNS problem?
The machine in question has a static ip addr, and I have static nameserver addrs in /etc/resolv.conf, corresponding to the static settings provided by my isp.
View 14 Replies
View Related
Jul 8, 2009
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
View 4 Replies
View Related
Oct 19, 2009
I recently upgraded my x86_64 system from FC8 to FC10 using Pre-Upgrade. (related blog link) It appears that the upgrade process installed a steaming pile of i386 packages that are duplicates of existing x86_64 packages. I now get update errors because of this package clash. I have searched the fora and the most progress I've been able to make so far is: I apparently had 8 unfinished yum transactions so I did yum-complete-transaction 8 times and have no more incomplete transactions.
The output of package-cleanup --dupes is not very helpful:
Code:
[tim@servy ~]$ sudo package-cleanup --dupes
Setting up yum
Loaded plugins: refresh-packagekit
Yet I still get transaction errors when I run updates via synaptic. It checks dependencies and downloads everything and errs when testing changes. This is the error it gives at the moment:
Code:
Test Transaction Errors: file /etc/gconf/schemas/gweather.schemas from install of libgweather-2.24.2-1.fc10.x86_64 conflicts with file from package gnome-applets-1:2.20.1-1.fc8.i386
[code]...
View 14 Replies
View Related
Dec 9, 2009
While creating a new VM for Win2K, I guet the following error when I try to "Finish":
Code:
Unable to complete install '<class 'libvirt.libvirtError'> socket closed unexpectedly
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 717, in do_install
dom = guest.start_install(False, meter = meter)
[code]....
This looks like a SELinux issue, since I do get a warning: SELinux is preventing qemu (qemu_t) "search" to / (fusefs_t). I'm attaching the complete SELinux Alert.
View 2 Replies
View Related
Jun 2, 2009
I recently built my second general-purpose server, and recently installed fedora core 10 on it. The first thing I attempted to set up after installation was the network - and that's where it's gone wrong When editing a network device using the graphical system-config-network utility, I find that the subnet mask is being automatically changed to match the default gateway address every time I attempt to modify any of its settings (or sometimes even when I cancel the changes). This also means that I cannot set the subnet mask, as it simply won't accept my setting for it. I seem to be able to get around this glitch by setting the subnet mask using the shell version of the same utility, but that doesn't solve my network issue.
Even when I use the shell utility to fix the subnet mask, I'm unable to ping other computers or routers on the network even when ifconfig indicates that the desired ip address has been taken, and other computers on the network are also unable to see the server. I'm using a wired connection and a static IP address on a network with no DHCP.
View 14 Replies
View Related
Jul 16, 2009
I have a problem to login with the root user from gui (I use Gnome). The root password is ok. Is there a way for me to logon with the user root in gnome?
View 1 Replies
View Related
Jun 24, 2011
About a week ago I used preupgrade to make the transition F14 -> F15 on a x86_64 workstation.
The system has been fully updated ever since, but I'm still not able to login either with KDE or Gnome. With KDE, the login process freezes before completion, whereas with Gnome I get the "wallpaper" behaviour reported here: [URL]
Funny though, I can login in the KDE failsafe session.
I could find no other thread reporting this problem and am at a loss on how to start diagnosing the problem. If anyone out there has any suggestion, I'd welcome it...
what's the difference between a "regular" KDE session and the failsafe one? They both look & feel the same to me...
View 2 Replies
View Related
Jan 11, 2010
I was using Fedora 11 for the past few months. It was working fine. I upgraded yesterday to Fedora 12 and now every time I boot up, the fedora logo screen comes up, the "f" is filled up and after that the screen goes hazy. I was expecting the login screen but nothing comes - the system freezes sort of.
View 1 Replies
View Related
Dec 20, 2010
I am unable to login to kde after upgrade to fc14 from fc13 as user , the splash screen works for seconds and returns back to login screen, but I am able to do as root
I also managed to login to KDE (failsafe session)
and also I am able to login as normal user to gnome desktop
View 5 Replies
View Related
Jul 21, 2010
I burned the Fedora 13 x64 DVD, booted from it, and attempted to upgrade my Fedora 12 x64 OS. It found my previous installation than asked my what to do with my boot partition. I chose to upgrade it, rather than skip or whatever else, only to eventually be met with a message saying the partition is too small by 9M. Really ? This is a 100 MB partition. Is 100 MB now too small for a boot partition ?
View 1 Replies
View Related
Feb 3, 2010
I've installed F12 twice now. After completing the installation and getting all the updates via YumEx, my network trouble begin after a reboot. I am not able to login as root under gnome so I can't see the services panel.
Tried to reinstall 'NetworkManager' after the fact but of course I have no network connections so I may have made the problem worse. I hate to reinstall and repeat the same troubles over again as it consumes a lot of time. I don't know where to begin.
View 8 Replies
View Related
Mar 29, 2010
If I'm getting good at anything with Fedora, it would be making mistakes. I have Fedora 12 installed and it was running fine until I attempted to set the path in bashrc and cshrc for jdk. Now I am unable to login using the only user account I created at install. When I enter my password the login screens goes blank then my mouse pointer appears with the circling dashed loading symbol for a few secs and then brings me back to the login screen asking for my password again.
View 4 Replies
View Related
Jan 6, 2009
When trying to launch firefox after upgrading to FC10, I get:Couldn't load XPCOM
View 4 Replies
View Related
Aug 6, 2009
I did the yum preupgrade install, all went well, did preupgrade -gui ; did everything fine, then i got the REBOOT now to start updating, clicked and i have just
View 5 Replies
View Related
Jan 8, 2009
Who has successfully upgraded going from F7 x86_64 to F9 x86_64 using the yum approach? I have had about 0% success getting everything to work correctly doing a fresh install of F9. Everything works correctly in F7( sound, firefox/flash, networking, samba, etc ), so I figure that starting with something know to work and upgrading to F9 might be a better approach that starting with F9 and having it guess.
View 7 Replies
View Related
Jan 22, 2009
It's become a tradition since I've installed FC6 on my machine: after each Fedora upgrade, the PC hangs at reboot because of a badly make initrd !
I found this post a while ago that helped me to solve the problem by rebuilding the initrd with the right librairies in it: [url]
So for each upgrade I've done the last 2 years I had to follow again these instructions to rebuild the initrd.
I've just finished the upgrade from F9 to F10 and I faced the following friendly message:
Code:
Allright, not a surprise in fact. While rebuilding the initrd I discovered there's no more /lib/i686/nosegneg/ directory in Fedora10's initrd. Therefore I reinstalled the libm-2.9.so library as follows:
Code:
Once the initrd rebuilt, I rebooted and faced a second friendly message:
Code:
I searched for posts reporting problems with segfault in ld-2.9.so but didn't find anything. So now I'm with a successfully upgraded fedora 10 system that refuses to boot.
By the way, I've done the upgrade using the netinstall CD, all the packages have been retreived online without errors and I think I've therefore the latest versions.
How to making this F10 box to start ?
View 4 Replies
View Related
Feb 23, 2009
Lately I was upgrading from F9 to F10 on my IBM thinkpad, everything looked good and in the end of the uppgrading prosess I got a messages witch told me that my upgrade was successfull and I was asked to reset the computer, but there my problems begin , after reset I only get black screen with the name name GRUB written in the up left corner of the screen and everything stopps there.
View 2 Replies
View Related
