Fedora Installation :: FC11 Upgrade Won't Startup To Desktop?
Jul 12, 2009
Just upgraded from FC10 using the DVD using upgrade option. I got all the way through the upgrade with no problems. However, upon reboot, when I get to my login screen, I sign in with my username and password but I get an error about kstartup manager. I think the gist of the message was it is missing and I think the error # was 127 (I think). KDE will not start. I also tried XFCE, but it will not start also.
What should I do?
View 2 Replies
ADVERTISEMENT
Jun 22, 2009
I've been running FC10 with all updates and had downloaded the FC11 DVD. Yesterday I upgraded to FC 11 using the DVD and it appeared that everything went fine. However when I tried to do ayum updateI got the following error. There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
No module named yum
install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
2.6 (r26:66714, Mar 17 2009, 11:44:14)
[GCC 4.4.0 20090313 (Red Hat 4.4.0-0.26)]
go to the yum faq at: [URL] I'm not sure what to do next. I also noticed that all my previously configured repositories are lost.
View 3 Replies
View Related
Jun 11, 2009
I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies
View Related
Jul 6, 2009
I cannot seem to get past the "creating File System.." window on a laptop upgrade
Setup: Thinkpad T23 (dual boot) upgrade from fc10 using DVD iso.checked with checksum and burnt by K3b.
History/actions taken:
Burnt iso to DVD and install/upgrade froze "creating File System " froze after approximately 10 minutes.
(completely froze and had to use the power button!)
Checked disk OK on laptop, tried again, same fault.
Bought another DVD.(different die) and tried again, same fault.
Tried another laptop HD, (full install not dual boot) , same fault.
Removed partitions with fdisk, but still no luck.
Tried disk on a spare HD on my PC and it works, I get into the window allowing software selection!
Tried a "Linux Format" fc 10 disk and that works, also tried a PCLinux LXF disk which also worked.
The laptop does not report any problems at bootup and I do not not what else to try
View 11 Replies
View Related
Aug 2, 2009
How can I force the upgrade FC10 -> FC11 with online download? Somewhere in Software Update settings?
View 2 Replies
View Related
Nov 24, 2009
Was using preupgrade from FC11x64 to 12x64. Preupgrade caused alot of problems like /boot not enough diskspace. After some searching found the steps and preupgrade proceed happily but after reboot got kernel panic grrr.
Took 3 days to find another machine to download and burn the FC12x64 disk. So I booted via the FC12x64 disk and selected the 1st option to install/upgrade. I thought it is upgrade and so choose replace my existing linux system however it wiped out everything on the disk. I have some important data in my home directory. I think it is in LVM, not a partition like /dev/sda1. How can I recover them? Was using stock settings.
View 3 Replies
View Related
Dec 20, 2009
I installed FC11 from installation cds twice and I'm having a problem with Firefox freezing the system. The mouse cursor will move but nothing else is responsive, including mouse buttons and keyboard.I checked the media on every disc and they all check fine.I never had this problem with FC10. I tried upgrading Firefox -- with the necessary dependency upgrades too but without success.I tried to downgrade to FC10 Firefox and ran into a great big hassle with that.
View 4 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Oct 29, 2009
I've just upgraded from FC10 to FC11 (x86_64). Before the upgrade Firefox worked fine (it used a fair amount of ram but I typically have loads of tabs open :P ) but since the upgrade running Firefox maxes out my cpu. The whole system runs unusably slow if I have Firefox running now. I switched from KDE to LXDE and just ran Firefox to see if I could free up enough memory to save some tabs as bookmarks and close them but it's impossible (and not a permanent solution anyway). Konqueror runs blisteringly fast but with a cpu monitor running I can see starting Firefox just maxes out the cpu and it stays there, it's not just a heavy load at startup.I have 3GB ram and it's a dual core Centrino 2GHz so it's not an old system running out of resources and FF ran perfectly well under FC10.
View 5 Replies
View Related
Nov 23, 2009
Pulseaudio setup. My pulseaudio was working when I was using FC11 and it stops working after I upgrade to FC12 using preupgrade. The system sees audio device and alsa is working correctly. No audio at all (system audio and mplayer) from Pulseaudio. I am using the onboard Intel audio. The verify from the alsamixer that the volume is not muted. I also tries all the combination of profiles in the pavucontrol and in some of the profiles, I can see the output volume bar is moving, but still no sound
pulseaudio-0.9.19-2.fc12.x86_64
alsa-plugins-pulseaudio-1.0.21-2.fc12.x86_64
Attached is the pulseaudio log when playing video from mplayer.
View 14 Replies
View Related
May 10, 2010
kpackagekit warned me about a distribution upgrade to FC12in order to set things in motion i have to press the upgrade button is this action completely safe?since my FC11 is working like a charm, and i consider to upgrade to FC13, depending on the fact if i can build kernel drivers for kernel 2.6.32-,, that is still in the testing repo'smy idea is to upgrade all available packages from testing when fc11 is EOL, and i will see what happends after this upgrade, if my system crashes or whats so ever, i will install FC13.
View 9 Replies
View Related
Jul 8, 2009
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
View 4 Replies
View Related
Jan 12, 2010
I have a Broadcom wireless card in my hp dv6500z laptop, I had it all working properly in FC9 thanks to bbfuller and his post on the subject. After I upgraded to FC11 I have been unable to get it to connect.
I can see my neighbor's sites and suppose I could see my own if the SSID was allowed to broadcast but I keep that turned off. I put in all of the setting, including the network security key, but it won't connect, then when I go back and look again, the security key is not even close to what I put in; it gets changed to a huge string of characters.
I redownloaded broadcom-wl-4.150.10.5.tar.bz2.tar and followed the instruction on the post once again but no luck, which, after I thought about it, was a waste of time because if I can see other's wireless, then the card must be working. I have tried using Network Manager and not using Network Manager and still no luck...
View 6 Replies
View Related
Apr 4, 2010
Have been having my share of (nvidia) problems since last kernel update to fc11. Just can't seem to get x-server to work...
(Seems to me that I have had better luck with the 173xx legacy driver..Should I try that?...which one?..
I'm thinking: 173.14.20-1)...
Information; fc11 Leonidas i586 32 bit ..nvidia GeForce 7300 LE....ViewSonic VX922 19" LCD monitor
[root@Xray ~]# rpm -qa | grep -i nvid | sort
kmod-nvidia-190.53-1.fc11.4.i586
kmod-nvidia-2.6.30.10-105.2.23.fc11.i586-190.53-1.fc11.4.i586
nvidia-settings-1.0-3.2.fc11.i586
nvidia-xconfig-1.0-1.fc11.i586
[Code]....
Have blacklisted Nouveau in Modpobe... (Haven't done anything to grub.conf)... Have also tried to go the akmod route; but have never been able to make it work..
Have followed the instructions from Post 2 at the beginning of this thread; but I do get a message that says: "No package xorg-x11-drv-nvidia-libs.x86_64 available". I do have both rpmfusion repositories downloaded..
View 3 Replies
View Related
Sep 3, 2010
I recently updated to Ubuntu 10.04. On this same machine I've used Ubuntu for 3 or 4 years now. Upgrading from 8 - 9 - 10. I love Ubuntu and use it as my everyday work environment. Anyway, recently when I start my machine in the morning it boots to commandline instead of the desktop. For the last couple days I boot to safe-mode and do a package repair. Sometimes more than once. Eventually I get the desktop to start but it is annoying. When trying to boot to Fail Safe Graphics Mode(?) I get an error stating: "Fatal Server Error: No Screens." The message referred me to /var/log/Xorg/failsafe.log. Here is a snippet of the end of that log file:
[code]...
Also, I'm using an NVidia graphics card on an HP machine. I installed the "current version" accelerated graphics driver which it says is proprietary.
View 1 Replies
View Related
Jul 11, 2011
I used 'preupgrade' to upgrade from Fedora 13 to Fedora 15. After some problems during reboot, Fedora 15 finally finished the "Upgrade to Fedora 15" step and I was able to successfully boot into Fedora 15.
But my desktop items from Fedora 13 are gone. While the new GUI is nice I would like to recover my desktop items from Fedora 13. How do I do that and put them on the main Window desktop of Fedora 15 ?
View 1 Replies
View Related
May 4, 2009
I tried doing an upgrade straight from fc5 to fc10. The upgrade seemed to go all right but once it was completed I've noticed some issues. My main issues are these:
1. After the upgrade all my desktop icons have disappeared and I'm not sure how to recover them. (this applies to all user account on a home machine)
2. When I click the right mouse button on the desktop I get no context menu but I do get the menu when I right click on my top or bottom menu bars.
3. When I try to launch any applications, games, etc., I see the icon show up in the bottom menu bar for a few seconds but then it disappears and the application never launches.
Those are the primary problems I'm encountering right now. I know the files in the home directories are still there (I did CTRL-ALT-F2 into a terminal and logged in as root. Normally I would've done CTRL-ALT-F1 but when I did I saw acpid messages and no prompt.) I've looked through the forums here but nothing I came across quite seemed to fit my needs.
View 7 Replies
View Related
Oct 14, 2009
it's possible to use preupgrade to go directly from FC8 to FC11.
Also, I'm wondering if this will allow me to avoid formatting my hard drive or not. I'll have backups ready just in case, but was hoping maybe I could get away with not having to do the old two-step shuffle with all my data.
View 2 Replies
View Related
Jun 9, 2009
I'd like to try a clean install instead of an upgrade from FC10 to FC11. What is a good way of getting the list of all packages that were installed through yum, and how do I feed that list to yum on a newly installed FC11?
View 7 Replies
View Related
Jun 16, 2009
when I try to run yum I get this:
Quote:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
No module named yum
install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the
current version of Python, which is:
2.6 (r26:66714, Mar 17 2009, 11:44:14)
[GCC 4.4.0 20090313 (Red Hat 4.4.0-0.26)]
how am I supposed to install a package without my package manager?
I can't install software via System/Administration as well.
It's so weird that I can't find any threads about this, apparently I'm the only one with this problem.
View 8 Replies
View Related
Jul 13, 2009
I had FC 6 and FC8 installed on a laptop, and all my video players (xime, vlc, mplayer) worked perfect. However I installed FC11 and the video freezes for few seconds while the sound is working o.k. then the video starts moving faster to synchronize the sound. This just happens the first 10-15 seconds and using any video player...
View 3 Replies
View Related
Aug 19, 2009
I have and old IBM notebook which I use for work (due to the serial port), and I would like to install FC11 on it, the problem that it doesn't offer to boot from neither CDROM (since it doesn't have a built-in one) nor from USB. However, I have external DVD device witch connect through USB, and I have the notebook bootable floppy desk, how can I install FC11 using those?
View 1 Replies
View Related
Sep 22, 2009
How do I get java plugin to work in firefox 3.5.3 (default install of fc11 x86)64)? I removed the iced tea java completely. I installed the sun java rpm, but I cannot figure out where to link the plugin to. The firefox directory (listing below) has no plugins directory.
ls /usr/lib64/firefox-3.5.3/
application.ini chrome extensions LICENSE README.txt updater.ini
blocklist.xml components firefox modules run-mozilla.sh
browserconfig.properties defaults icons old-homepage-default.properties searchplugins
[root@dt-dan tmp]# find /usr/lib64/firefox-3.5.3 -name plugins
View 6 Replies
View Related
Dec 16, 2009
Is there a repo that I can add to get firefox 3.6 beta? I am on Fedora 11.
View 14 Replies
View Related
Jun 22, 2009
On my PC (fresh FC11 i386 instllataion from CDs), dhclient doesn't work. When it tries to get an IP address with dhclient, it gets No DHCPOFFERS reveived and fails. The ethernet of my PC works fine - I can manually set IP address, netmask, gateway etc. to connect to my persoal Linksys router, but if I change to DHCP, it fails as above. So it's not the problem of the ethernet driver of FC11. I suspect that dhclient of FC11 is buggy. (For the record, DHCP works fine on FC10 and Windows XP with my Linksys router.)
View 1 Replies
View Related
Jul 16, 2009
Has anyone successfully installed Fedora Core 11 on a system with a Tyan Trinity KT-400 S2495 motherboard? I have two systems with this motherboard. I tried to install FC11 from the live CD. Both systems have AGP video cards based on the Nvidia GForce-2, although the cards are of different brands. On one system, FC11 installed, but after the machine is booted and I log-in, it runs slower and slower until it is effectively frozen after about fifteen minutes. Somtimes a "Kernel Failure" window will pop up. A momentary press of the power butting will bring up a shutdown window and shut the machine down after a wait of 60 seconds.) By doing several reboots, I did manage to update the installation. (My complements to the developers on the fact that the package download will pick up where it left off).
However it still freezes. On the other system, when the Live Cd has booted, the keyboard and mouse don't work, so I can't do the installation. I tried a different keyboard and mouse, tried rebooting several times. When I boot the machine from SystemRescueCd (kernel 2.3.29) the keyboard works in the text mode. I used the "wizard" command to try various graphical modes. In the default Xorg graphical interface, the keyboard works but the mouse doesn't. In the "Vesa" graphical interface, neither the keyboard nor the mouse work. I tried the Ubuntu 8.04 live CD and the keyboard and mouse don't work. I tried an FC 8 install Cd, the keyboard works in the installation screens but the mouse doesn't. I replaced the Nvidia AGP card with a Voodoo 3dFx PCI video card. The system won't finish posting. It hangs on the second screen. This system formerly ran Windows 2000 OK and before that it ran Window 98. But perhaps it's now defective?
View 3 Replies
View Related
Aug 18, 2009
I'd like to know, if there is more recent ISO to be download to burn the FC11 Installation DVD. I could get around this Ndvidia graphic installation problem where I am getting a command line system only.
View 10 Replies
View Related
Sep 28, 2009
i recently bought an elonex websurfer with the following spec:
Processor
Processor clock speed (MHz) 1200
Processor front side bus (MHz) 400
L2 cache (MB) 0.128
Chipset VIA VX700
Processor family VIA C7-M
Processor VIA C7-M ULV
is there any reason why i can't uninstall win xp and install Linux? i've tried a few distros and they all cause the computer to freeze. the websurfer came with a winxp image partition
View 4 Replies
View Related
Sep 30, 2009
I've lost my boot manager ,can't boot from harddisk ! I've installed F11 x86_64 kde livecd on a partition aside with FC10 and windows xp, created a /boot ext3 partition + a " / " ext4 root partition and a swap partition shared with F10.I've tried to restore booting windows xp with the windoze restore cd with the "fixmbr" tool, but it did'nt fix i
View 4 Replies
View Related
Oct 15, 2009
I did a yum update last night, then rebooted and at boot up I'm left with "GRUB" letters and a blinking underscore...
I am currently reinstalling from the DVD just to reinstall GRUB... at lot of time wasted... just to re-install GRUB.
Let me know how to avoid blowing out GRUB please. I use a dual boot so I install the booter loader to the first sector of my Fedora HD. I don't understand how an update could blow out GRUB running.
View 10 Replies
View Related
