Fedora Installation :: How To Extract Bootable Part From The Installation DVD
Jun 24, 2010
I need to install fedora on my new 16 DELL servers. I will doing it through DRAC (Dell remote access console) but DRAC can mount only one ISO at a time. I am planning to do multiple installations at the same time.hence i need multiple boot.iso files for each and every DRAC console that I open for each server.The question is...How to extract just the bootable part from the fedora DVD? I don't whether it should be called boot.iso, but I hope you get my point.I believe it has got something to do with the "isolinux" folder on the DVD, but I don't know what and how.
View 4 Replies
ADVERTISEMENT
Jul 8, 2011
I'm trying to extract .part files. These are mac extensions similar to .rar or .zip. I need to extract a whole bunch of them simultaneously. Theyre probably registered in sequence just like .rar files. What program can I yum install or where should I look to extract these to what will probably be an ISO.
View 1 Replies
View Related
Apr 5, 2011
I'd like to write a kickstart file that installs available Fedora 14 updates as part of the installation process, much as if I was doing a standard Fedora 14 installation and had enabled the 'updates' repo.
So my question is, is there an easy way to do this? I don't want to have to go down the route of downloading all updated packages and maintaining my own update repo (or indeed, creating a repo with the dependencies listed above).
View 1 Replies
View Related
Dec 8, 2010
I just used dd to clone a linux partition to a new hard drive, it had 800mb left on the old hard drive, after dd, new hard drive lists 1.29/1.3 terabytes full. Is this what happens by default in dd? How can I fix this?
View 1 Replies
View Related
Mar 4, 2010
I own a legit Windows XP Home CD, with time its getting more scratches so I want to make an ISO backup. I tried Brasero but the ISO it creates doesn't seem to be bootable. I don't mind using GUI programs, but I'd prefer to know the command line programs to learn more .
View 9 Replies
View Related
Mar 26, 2010
I have this string ./DAT000728-652523058.job.I want to extract the no between DAT and - sign. I want 728. I dont want 000728.echo ./DAT000725-560162365.job | cut -d'T' -f2 | cut -d'-' -f1 I am getting 000728.string can be ./DAT326822-652523058.job also. then i need 326822
View 6 Replies
View Related
Apr 13, 2009
Requirements
1) Can be integrated into web browser (so when click on chat the a window will open for chat with technical support executive:- It will be basically used for TS)
2) Must Have option to transfer file between costumer and TS execut
3) No installation on part of client
Basically it chat support as any other company on net... Like Symantec and all(Not That big thought)Any one know or have experience in this(setting up is relatively simple for me i need info on any particular software that i should try)Currently thinking about experimenting with ejabber... If that a bad choice i will loose lot of time and be behind schedule by miles.
View 3 Replies
View Related
Aug 10, 2011
I kept bumping into it all the time, only now when I need it I can't find it anywhere! What architecture is the kernel of my machine?
2.6.18-194.el5
View 1 Replies
View Related
Sep 1, 2010
I have been using Ubuntu for about a year and I decided to switch to Fedora just to see how it goes with getting everything in my system working again. I would say that with Ubuntu and Fedora installations I have installed and reinstalled 15 times, which I mention because I am not new to installing linux. I have used GParted to partition and resize my HD numerous times and reinstalled linux on a partition and so on. I know how to do all of that without any problems.
NOW HERE IS WHAT HAPPENED... I installed Fedora on my Desktop which I had partitioned into a 190 GB partition onto which Windows is installed and then I had another 30 GB partition onto which I chose to install Fedora. I chose the "replace existing Linux systems" in anaconda... and what resulted was a 30 GB partition with Fedora that is now showing up as LVM. I have never seen an LVM partition and I am not sure if I can use GPARTED to resize it without destroying it. I have used GPARTED to resize Linux partitions before, but they were never showing up as LVM. The forums on GPARTED only show info from about a year or two ago.
Here is what I want to do (and reading around on forums doesn't really give a good explanation of whether it is possible)... Is it possible to install Linux Mint into that 30 GB Fedora LVM partition by just resizing the Fedora part of the volume? So, the question is this: How can I resize the Fedora part of the LVM volume and then install Mint into that LVM partition?
If Fedora was on an ordinary 30 GB partition I would have no problem with using GPARTED to chop that in half and then use the 15 GB I freed up to install Mint. I just don't want to destroy the Fedora stuff by messing around the with the LVM partition so I would like to hear from others who have worked around this issue and please don't link to the ordinary LVM howto's you get through a simple google search as I have already read them and I don't find them too illuminating.
View 6 Replies
View Related
Aug 19, 2011
I've been yum upgrading since Fedora 3. For the first time, I did a fresh install with Fedora 15 and I found that ibmcam.ko is no longer part of the distribution in any way (even through rpm fusion). Is there a replacement for ibmcam.ko so I can get my cam working again?
View 6 Replies
View Related
Feb 12, 2010
My rquirement is I have a flat file with lot of lines on it.example:
line1
line2
line3
[code]....
View 8 Replies
View Related
Dec 26, 2009
I wanted to shrink my Windows NTFS partition to allow me to grow my extended partition which contains my Linux partitions, namely to grow my swap space and home directory some however it just fails at enlarging the extended partition. Is this a known problem because I know there were rewrites to the storeage backend of Anaconda.
View 4 Replies
View Related
Feb 27, 2009
I downloaded the *.iso for a Fedora 10 Live KDE installation. It is currently on my hard drive. I tried burning it to a CD with Roxio using two different methods. The first one was not a bootable method. So I checked the Roxio documentation and burned the image that way. In burning an *.iso to a bootable image on a disc, Roxio asks for three different file types, none of which are *.iso. I selected my *.iso because that was all I had. Then I burned it as a bootable to a CD.
When I tried to boot it, I got a black screen with a message at the top left reading something like there was no operating system available. I thought that was strange, and I do not know what to do.
View 8 Replies
View Related
May 27, 2010
I've successfully created bootable DVDs for several distros over the years. First, I downloaded F13 x86-64 the day of the release, checked the sha256sum against the CHECKSUM file (it passed), and burned a DVD. I see 5 folders and 10 files on it, as expected.I restart, and my PC (AMD Phenom 9600 quad, Gigabyte S Series GA MA69G-S3H motherboard) does not boot from the DVD, but from the hard drive.So I get into the bios, check to make sure that the boot order is correct (it is) and try again. No joy.
Next, I assume I screwed up, had a bad burn, down load and burn again, checking everything. Still won't boot from DVD. Try getting the ISO from torrents, (checking sha256sum all the while), burn my 3rd DVD (using Brasero this time) and - same problem.Now I assume I have a hardware problem, and for grins, put in the F12 ISO DVD. It boots from there just fine.So I don't have a hardware problem, and I seem to have 3 good burns, but it's not recognized as a bootable DVD.
View 14 Replies
View Related
Feb 17, 2009
I'm a newbie to Linux and FC10. I recently installed FC10 on my laptop which has the following config:
AMD64, 1gb DDR2 RAM, 60 GB HDD, DVD Drive and ATI Chipset.
The problem is FC10 locks up randomly and I have seen a couple of threads on this. I want to uninstall FC10. However I'm unable to uninstall / remove the partition. When I try to boot up my laptop using a Windows CD (planning to remove the linux partitions from the WINdows setup) I only see a blank screen, the DVD keeps on spinning but nothing happens. I have tested the windows xp cd on other machines and works fine.
View 2 Replies
View Related
Oct 2, 2009
This is the first time that I try to install Fedora 11 to my Cd-driver-less notebook. I try to boot from my USB stick it did not work. For me, only feasible solution is to boot from HDD.
However, how do I create bootable HDD from Fedora 11 live CD? I have already downloaded and burnt Fedora-11-i686-Live.iso to a CD. Since I cannot boot from my CD, I need to boot from the HDD. But how?
Also some additional info: I have already formatted my notebook's HDD by hooking it to my PC. So I can only access my notebook's HDD from my PC (winXP installed) As far as I can guess, I need to partition and format my notebook's HDD based on fedora's requirements. (I do not know how?) And copy some boot and installation files to these partitioned disks. (don't know neither)
View 7 Replies
View Related
Dec 23, 2009
I would like to install F12 to a bootable USB device from a working Fedora partition other than the liveUSB-creator option. Is there a way to do that from a working Fedora machine without have to burn a DVD? Seems like there should be but I can't find a guide for it.
View 3 Replies
View Related
Apr 23, 2010
I downloaded 64-bit fedora12 iso DVD image and created a DVD. When I tried to boot, the CD does not boot. I checked the documentation to see whether book.iso or any other file needs to be copied along with. My question is:
- What are the files I need to copy to a DVD for the DVD to boot up straight up from the DVD...?
- If not, is there another way to get this fresh installation done.
I have 32-bit Fedora 11 installed in a machine, but need 64-Fedora to do some testing, before going with RH Linux.
View 7 Replies
View Related
May 29, 2010
I am trying to set up an old server to run Fedora but I am having an issue I cant seem to fix. This Is the skinny. I have tryed with 10,11,12,and 13 and get the same result. I can load the live disk and do the install and it finishes but when I restart, The system does not see the HDD as bootable. But hears the strange thing. I can take the drive out and put it in my desktop and it boots fine. I also have been able to put suse and ubuntu on it without any trouble. I cant figure out what the difference is with Fedora.
View 4 Replies
View Related
Aug 29, 2010
I am using a 8 GB usb flash to create a F13 Live Media. I created it using the livecd-creator. But when I use it to try to boot, it says "No bootable partition in table". What's wrong? I did some searches on google, but didn't find a solution.
View 7 Replies
View Related
Nov 10, 2010
I am trying to install fedora 14 from live CD (USB boot) in my system which already has Windows 7. The installation goes fine however when I reboot the system I get 'No bootble device found' error. install fedora on the entire hard disk which I cannot do right now.
In Bios there are 'Native' and 'Legacy' options for 'ATA/IDE Mode' and if I select 'Native', 'Configure SATA as' option is enabled with options 'AHCI' and 'IDE'. I reinstalled fedora with all possible configuration, Legacy mode, Native + AHCI, Native + IDE but got the same error when booting. I have also tried options; MBR on /dev/sda and first boot record on /dev/sda5.
fdisk -l :
Device Boot Start End Blocks Id System
/dev/sda1 2048 78782463 39390208 5 Extended
/dev/sda2 78782760 211897349 66557295 7 HPFS/NTFS
[Code]....
View 1 Replies
View Related
Feb 8, 2011
I downloaded fedora14 iso and burned it straight to a cd but on reboot, it booted from my hd. My bios is set to boot from cd first.Next I extracted the iso to a subdirectory and burned that to a cd, creating a boot disk using the img file in the [BOOT] directory. When I rebooted, I got a cursor in the top left corner of the screen and nothing else
View 3 Replies
View Related
Jan 12, 2010
I have downloaded Fedora-12-x86_64-DVD.iso. Now I want to create a bootable USB from the downloaded ISO file. I tried with the latest version of liveusb-creator 3.9.1. I am unable to do so. It took around 3 days to download the iso file and now I cant even use it.
ERROR MESSAGE::
Fedora-12-x86_64-DVD.iso selected
Verifying filesystem...
Extracting live image to USB device...
Wrote to device at 1 MB/sec
Creating 100MB persistent overlay
LiveUSB creation failed!
Here is the screen shot....
View 5 Replies
View Related
Jun 3, 2011
I downloaded the Fedora-15-i386-DVD.iso and want to install Fedora 15 from it. I don't want to use the LiveCD version since it doesn't have all the packages. So I follow the tutorial given here under the section titled "How to Make a bootable USB Drive to Install Fedora instead of using a physical DVD ". Everything finishes off well. However. when I boot my computer using the USB, it says "USB doesn't have operating system. Safely remove and reboot".
Now, what to do? I also didn't get the line the tutorial saying, "You should now have a bootable USB stick which will run an 15 install. When you boot the stick, you may also add askmethod to the boot line and select a hard drive install and select the drive as /dev/sdb1 (or your USB device drive) and the path should be / " What am I supposed to do?
View 1 Replies
View Related
Jun 13, 2009
I'm installing Fedora 11 x86_64 from the DVD iso. The SHA256 checksum was fine, and the media checked out fine just prior to install. The F11 install seems to go perfectly and I get all the way through the installation. However, on reboot, I get this message, "No bootable device -- insert boot disk and press any key"!!!!I'm installing to an old Intel 975XBX2 motherboard with 4GB of memory, which I have used successfully, flawlessly for every single Fedora install since F6. I've only been using one hard drive with a FAT32 partition, and an NTFS partition for Windows XP, the remainder of the disk is Fedora.I've probably tried this F11 install about 8 or 9 times already with no success; actually, the installation seems to go perfectly, but I just cannot boot the PC. I think there's something wrong with GRUB being written into the MBR of the hard drive, because I cannot boot DOS on that FAT32 partition, I can't boot into the NTFS partition which contains XP, nor can I boot into F11.Anyone else having problems with the boot? I've been a long time Fedora user and was counting on the reliability of F11: Wondering if that Anaconda re-write had anything to do with all of these problems?
View 14 Replies
View Related
Mar 15, 2010
I ran the ubuntu 11.04 live CD on my laptop that had an earlier version of ubuntu (9 maybe??). I really liked what I saw so I used the Install ubuntu 11.04 wizard and chose the option to override the earlier version. During the 'Importing document and settings' step a pop-up entitled Failed to unmount partitions. the body stated: migration-assistant needs to mount a partition, but cannot do so because the following mount partition could not be unmounted:
/dev/sda1
The only app showing on the taskbar is the Install. this is running from the live CD.
View 9 Replies
View Related
Feb 24, 2010
When I look in /var/cache/apt/archives/, I see packages I recognize that I downloaded. But, I also see packages that I know I did not download, but rather were part of the initial installation of the image iso file on the CD. For example, the package for Abiword is in there. I would like to know which packages in this directory I installed, and which were part of the initial installation.
How do I know which packages are part of the installation from the image iso file on the CD? Once I know that, I would make a copy of all the other packages in this folder onto a DVD, so if I ever need to reinstall Ubuntu 9.10 I will know which packages to install over and above those part of the initial installation off the iso CD.
View 5 Replies
View Related
May 19, 2010
I am doing a dist-upgrade from 8.04LTS to 8.09. I use usb KVM switch, and I keep my eye on it so that I can respond to the usual configuration file prompts that pop up. For a while everything went fine, but suddenly I find that I can't use the keyboard to log in and check the progress (the mouse is completely unresponsive). Here's the kicker though: the computer is fine. I can use 'Ctrl-Alt F1' through F7, and the computer responds appropriately; it just doesn't do anything when the login screen is up.
I checked the /var/log/dist-upgrade/term.log, and if I understand it correctly, whether or not to keep /etc/mysql/my.conf is currently up for question. Is there any way to take back control of the computer without interrupting the upgrade? Not knowing very much about the install process, it seems like the GUI stopped polling for input.
View 2 Replies
View Related
Mar 18, 2011
I tried to install ubuntu 10.10 onto an HP laptop and could not get anything to boot apart from windows vista. When I entered the boot options and selected CD to try and load the ubuntu CD it just booted off the HDD repeatedly. I removed (foolishly perhaps) the HDD and formatted it on my other machine, then created a start-up disk for ubuntu on it. I re-installed the hard drive and loaded ubuntu with no problems, but I can't install it. What do I need to do to the HDD (partitions, flags, etc) to make it so I can boot the iso from one part of the drive and install on the other?
View 7 Replies
View Related
Apr 22, 2011
I'm trying to install Debian 6.0.1a on a MacBookPro5,5 (intel core 2 duo - EFI firmware). I have rEFIt 0.14 and a live cd of Debian (on a usb stick). I'm installing Debian on a usb stick. The installation process goes along smoothly, but then, it's impossible to boot up the freshly installed system (I get a black screen with a blinking cursor). I read that this is a common problem but all the solutions I have found have not worked for me.
The underlying idea is that since Macs have EFI firmware instead of a BIOS, the partition tables of devices are different (GPT for EFI versus MBR for BIOS), and grub is incompatible with GPT (I know there is an EFI version of grub but it is said to not work well). So the devices must have both a GPT partition table and a MBR one. These have to be "synced".
The tools available for this are:
- rEFIt can sync the partitions, but I haven't managed to have it sync them on any other device than the main hardrive. If I sync the main hardrive, then even the live cd (which is on a usb stick) won't boot (black screen with "GRUB _").
- Debian has a tool called gptsync, which returns a message saying "no data partition in gpt table, nothing to sync".
- Mac OS X has a tool called gptsync which returns a message saying "unknown partition type detected - I'm not touching this disc".
The reason there is no data partition is that gptsync sees my main partition as "EFI system". If I could change that, maybe I could sync the partition tables. Can that be done? Also, something I don't understand is: the live cd boots fine without grub. So why do I need grub? Couldn't the system boot up without it like the live cd does?
View 5 Replies
View Related
