Fedora Installation :: F11 Install Worked But "No Bootable Device..." On Reboot?
Jun 13, 2009
I'm installing Fedora 11 x86_64 from the DVD iso. The SHA256 checksum was fine, and the media checked out fine just prior to install. The F11 install seems to go perfectly and I get all the way through the installation. However, on reboot, I get this message, "No bootable device -- insert boot disk and press any key"!!!!I'm installing to an old Intel 975XBX2 motherboard with 4GB of memory, which I have used successfully, flawlessly for every single Fedora install since F6. I've only been using one hard drive with a FAT32 partition, and an NTFS partition for Windows XP, the remainder of the disk is Fedora.I've probably tried this F11 install about 8 or 9 times already with no success; actually, the installation seems to go perfectly, but I just cannot boot the PC. I think there's something wrong with GRUB being written into the MBR of the hard drive, because I cannot boot DOS on that FAT32 partition, I can't boot into the NTFS partition which contains XP, nor can I boot into F11.Anyone else having problems with the boot? I've been a long time Fedora user and was counting on the reliability of F11: Wondering if that Anaconda re-write had anything to do with all of these problems?
View 14 Replies
ADVERTISEMENT
Apr 29, 2011
I tried upgrading to Natty last night through the update wizard and the install went perfectly... until I rebooted and it got stuck at a screen with an "_" in the top left corner of the screen and nothing else. I guessed that this was a grub problem, so I tried reinstalling grub2, but to no avail. So, I burned a Natty install CD and proceeded to reinstall, formatting the partition (/home was on another partition and did not get formatted). Again, the install went great, rebooted and this time I get "No Bootable Device - Please insert a bootable device and hit enter". So, again, I try re-installing grub2 from the live CD. I purge, uninstall, and reinstall grub2... nothing works! What the hell?
View 1 Replies
View Related
Mar 5, 2016
I am having a problem with my new Toshiba Satellite Laptop... I had installed debian for some time but last week suddenly stopped working.
- the computer stopped working at all... nor bios access.
- I did a new bootable installation in USB drive and downloaded the latest debian iso from official website and created the bootable device via dd as usual.
- I installed the new debian but after I removed the usb drive in order to boot into my new system. I was taken to a screen saying "Start PXE over IPv6 -- Start PXE over IPv4 ..." I followed several links looking for a fix, and all of them lead me to disable network boot option in BIOS setup...
- I disabled but after that it appears a new message "No Bootable device -- Press restart system" and nothing happens from there.
- I have found info in Internet regarding this issue, but all I find is "windows related"
- Someone recommended me this: "The BIOS can no longer recognize the hard drive as a bootable device. This could be for a number of reasons. Your best bet, if it is still under warranty, is going to be to bring it back to where you purchased it"
- But instead, what I did was to create a new bootable device, this time containing XUBUNTU and installed it to the machine, I had the good news that the installation proceed without any problem, so I could figured out that my machine it is still alive...
- Back to my issue and hoping that something unexpected happened that fixed the machine, I got back and did a new Debian bootable device, also hoping that the latest was corrupted or something, but after reboot to my new system... the problem persisted again.
- I chose to have 1 partition in full disk.
Now I don't know what else to do... I don't like ubuntu, I have used debian for some years and I want to keep using it and I would not like to be forced to move to ubuntu or xubuntu for this.
View 14 Replies
View Related
Nov 10, 2010
I am trying to install fedora 14 from live CD (USB boot) in my system which already has Windows 7. The installation goes fine however when I reboot the system I get 'No bootble device found' error. install fedora on the entire hard disk which I cannot do right now.
In Bios there are 'Native' and 'Legacy' options for 'ATA/IDE Mode' and if I select 'Native', 'Configure SATA as' option is enabled with options 'AHCI' and 'IDE'. I reinstalled fedora with all possible configuration, Legacy mode, Native + AHCI, Native + IDE but got the same error when booting. I have also tried options; MBR on /dev/sda and first boot record on /dev/sda5.
fdisk -l :
Device Boot Start End Blocks Id System
/dev/sda1 2048 78782463 39390208 5 Extended
/dev/sda2 78782760 211897349 66557295 7 HPFS/NTFS
[Code]....
View 1 Replies
View Related
Apr 16, 2010
I tried to install F12 on my new IDE-HDD. The installation completed without any errors. But, when rebooting my PC I got a dark screen with error message: reboot and select proper boot device.
No BIOS boot up issue, since booting up using other hard disk running windows has no problem at all. I have set the hardisk jumper to master/primary, tried to re-install F12 a couples of time, but didn't make any difference.
View 2 Replies
View Related
Jan 29, 2011
I have dell laptop running with windows xp and im trying to install ubuntu 10.10 by booting it from a cd.
I verified the image I downloaded by comparing the hash and it worked out fine. I wrote the image into a cd and changed the booting priority on the BIOS to boot from the drive. When attempting to boot I get the "No bootable device found strike F1 to retry, F2 for setup or F5 to run onboard diagnostics" message.
View 1 Replies
View Related
Dec 23, 2009
I would like to install F12 to a bootable USB device from a working Fedora partition other than the liveUSB-creator option. Is there a way to do that from a working Fedora machine without have to burn a DVD? Seems like there should be but I can't find a guide for it.
View 3 Replies
View Related
Oct 7, 2010
I am dealing with a problem which I cannot seem to fix myself.I have a computer (age ~1 year) on which I am trying to install Ubuntu.The problem which I am facing is at the point of choosing to boot from the CD it says 'cannot find bootable device'.Note that this PC does not have a floppy drive and that I do not have a 1GB USB stick. I do have a 256MB USB stick.
View 9 Replies
View Related
May 13, 2010
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies
View Related
Dec 6, 2010
The installation went okay (to start with) on my newly formatted hard drive (after death of Windows XP), but I got an error about 3/4 of the way through. The system said something about starting the desktop to try to resolve or fault find the problem. So I now have a desktop with access to all the menu system. I am feeling my way around slowly getting used to the environment. I think there are bits missing from the install but with no frame of reference I cannot tell what exactly is wrong. One obvious problem is my Monitor screen resolution. In Monitor preferences it is set as 'unknown monitor'.
The detect monitor button does nothing and the resolution is set as 2048 x 1536 which is just too small to see properly on the screen. I am currently using zoom to increase within a window to use at all. I have tried opening a terminal and using the xrandr command which reports the following:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 2048 x 1536, current 2048 x 1536, maximum 2048 x 1536.
default connected 2048x1536+0+0 0mm x 0mm
[code]....
View 9 Replies
View Related
Oct 12, 2010
My live cd worked flawlessly.
After I installed it, is another story I chose to include the suggested .mp3 codec, and to install updates at the same time.
Cmos and hardware all inits fine, then I get several seconds of a cursor, followed by the nice "ubuntu" title with little orange squares under it.
Interestingly, the squares do not cycle until I hold down the power button.
Searching for "10.10 boot" somehow returned zero results. ??
View 4 Replies
View Related
Jun 14, 2011
I've been trying since ever to install the new ubuntu on my FakeRaid controller and I'm really starting to get frustrated. After restarting, i get the message "reboot and select proper device.." So my first tough was that my grub was not installed properly. So i ran the boot_info_script.sh that I found in the forum and here is my output. It says that the boot loader is not installed and my Raid is screwed up. I went look in the BIOS and everything looks fine. Ive put the result.TXT from the script.
Quote:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of
/dev/mapper/ddf1_00000000000000004b1ba2914b1ba291f5010000f5010 000.
ddf1_00000000000000004b1ba2914b1ba291f5010000f5010 0001: ________________________
[code]....
View 2 Replies
View Related
Jun 12, 2009
I have a small atom-based workstation.I used preupgrade to move from F10 to F11.The process seemed to go smoothly.I boot up and everything is working as I expect, except for yum update.
View 1 Replies
View Related
May 10, 2010
I have laptop ASUS X51RL with Intel pentium dual core inside processor. As mentioned here:I tried to install i386 FC12 on it. When the instalation was completed, there was a message to reboot. So did I, and while the BIOS was still loading, of course, removed the DVD in order not to repeat the instalation. Fedora started loading with the three varioants of the blue color bars and suddenly on the screenappeared a long message finishing with the words: "kernel panic - not syncing: fatal exception in interrupt " and that was all - the system stopped untillo there and never loaded For the last 2 days this is about my 12th attempt to get linux. Before I had tried about over 6 times with ubuntu, finishing the same way after the first reboot, 1 time knoppix and 2 times Debian. Only debian succeeded to load succesfully after its instaltion was complete, but I didnt linke it and a friend of mine strongly recommended me FC12. So what am I supposed to do??? I guarentee, my hard disc is not corruted as I read 1 hundred times on google, I had benn running windows 7 before I started trying to get linux and everything was OK... the install DVD is also OK, I tested it in the same beginning of the instalation and the test was successfull.
View 7 Replies
View Related
Mar 20, 2010
I installed Debian lenny 5.04 today through netinstall. After install it refuses to boot and says, "No bootable device found - "insert and press any key".
Motherboard : Intel DP35DP
Processor : Intel core 2 duo
RAM: 2 GB
NVIDIA 8500GT 512mb
I have googled it around and it seems to be something to do with BIOS. I am sure harddisk is not fried. Because I installed Ubuntu and it works
View 6 Replies
View Related
May 19, 2010
Installed ubuntu 10.4 over previous ubuntu on Intel 945G. After installation and reboot the system does not boot: "no bootable device - insert boot disk and press any key".
Installation was done from USB-stick, prepared by UNETBOOTin. I have two HD's, one used for system + storage, another one just for storage. I manually deleted previous system partitions of previous ubuntu install in system HD. The system HD had about 1/3 of free and unallocated space for system partitions, which ubuntu installer created during the installation.
I tried to reinstall grub from bootable USB-stick and it succeeded but it did not help. The system is still not bootable.
I have used ubuntu for years and never happened something like this. Am I missing something or is ubuntu missing something???
HW failure is ofcourse possible but I am quite skeptical about it because Live ubuntu from USB-stick works well.
View 9 Replies
View Related
Jan 2, 2010
i had a working multi-boot system, vista on sda1,2; swap sda3; ext=sda4; ubuntu sda5; fedora sda6; data sda7 - i mount the data partition when using all of the linux releases so i don't have to have multiple copies of music, docs, etc. everything has worked fine until yesterday. i tried to install fc12 on sda6, replacing fc11. it required me to format sda6 as ext4. i wasn't sure where i had grub installed, but have a backup of menu.lst in data (sda7), so figured i could let it install to mbr or wherever it wanted to by default. when the install completed and i reboot, i get a black screen and these messages: CLIENT MAC ADDR: 00 19 XX XX XX GUID: XXXXX PXE-E53:
No boot filename received
PXE-M0F: Exiting Intel Boot Agent.
No bootable device -- insert boot disk and press any key I tried reinstalling fc12, same exact errors. I then thought maybe the problem had something to do with ext4 partition mixed in with ext3's, so i installed mepis on the sda6, and let it write grub to mbr (i think, not really sure where it wrote it). anyway, i still get the identical black screen. no grub type menu or anything. the screen used to show "DHCP for a few seconds", but doesn't anymore after i disconnected the ethernet cable.........
View 5 Replies
View Related
Jan 7, 2011
Unfortunately accidentaly I disconnected my usb drive my computer and my VMs run from so I just rebooted for a quick fix Now I can't open virt-manager locally and the VM's can't get network connections I see this in the logs after the last two reboots
Code:
grep lxc /var/log/messages |tail -n 2
Jan 7 00:45:04 F820 libvirtd: 00:45:04.524: warning : lxcStartup:1895 : Unable to create cgroup for driver: No such device or address
Jan 7 11:52:53 F820 libvirtd: 11:52:53.325: warning : lxcStartup:1895 : Unable to create cgroup for driver: No such device or address
[code]...
I tried restarting libvirtd after with no love so I rebooted and cgroup was gone this was a clean install of F14, after this started I brought the system current, I can provide the packages installed but they errors didnt change
View 1 Replies
View Related
Mar 5, 2011
- Old laptop with only PATA
- Bought a PCMCIA ESATA card and a SATA SSD in an external enclosure
- Bios is too old to support booting from the PCMCIA device
I bought an SSD to speed things up a little, but having some issues.
Since I can not boot from the SSD, I thought I'd load the kernel from the old PATA disc and then mount / to the SSD.
== What i've tried: ==
(sda = internal pata)
(sdb = external ssd)
1. Installed ubuntu to sda with seperate paritions for /boot /var /srv and /
moyd@A:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda9 4804736 2012760 2547908 45% /
none 508764 376 508388 1% /dev
[Code].....
View 3 Replies
View Related
Nov 21, 2010
I have 2 Debian OS's and wanted to put Fedora next to it.
Install went ok, but after rebooting it says: "No root device found. Boot has failed, sleeping forever."
During install from the live CD I didn't "v" the boot (efi or something?) because I thought Grub would take care of everything.
Should I just reinstall again and choose the Fedora bootloader? Won't it mess up Grub?
View 14 Replies
View Related
Jun 24, 2010
what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
View 1 Replies
View Related
Mar 17, 2010
I just brought up FC12 on our VSphere to begin testing..The nic did not configure properly for some reason.. I was able to go to command line, and do an "ifup ifcfg-eth0" and DHCP got an address. Go into GNOME - System-Administration - Network , or system-config-network the "Activate/Deactivate" is greyed out. Also, GNOME - System-Administration - Network Device Control show NO device..
View 1 Replies
View Related
Feb 1, 2011
I've done an image according to:
[URL]
then I've copied it using:
Code:
# fdisk -l
Disk /dev/hda: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1145fa35
[code]....
View 2 Replies
View Related
Feb 24, 2011
I'm looking to upgrade my netbook from the default Windows 7 Starter pack, over to the ever amazing Debian Ubuntu package. The problem is that, just as the title suggests, my netbook is unable to boot from a USB device, nor does it have a slot to place CDs/DVDs in. I'm not really in the position to purchase an external CD/DVD drive, however I'm not sure that would work anyways since it would connect via USB.. What can I do? Am I stuck with Windows 7 forever on this netbook?
View 4 Replies
View Related
Sep 19, 2009
I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies
View Related
May 4, 2010
How Do I Create Bootable USB Installation For NetBook ?
I am going mad!
I am trying to make a bootable USB installation
so I can try OpenSUSE 11.2 on my NetBook with no CD/DVD drive.
I've Google'd for hours and tried different things
but I can not make a bootable USB of OpenSUSE 11.2.
I am running Ubuntu 10.04 now on my main desktop
and Ubuntu 10.04 now on the NetBook,
but have access to a Windows XP computer too...
View 2 Replies
View Related
May 13, 2011
I have installed Ubuntu 10.10. Works good, but I would like to switch LTS-release-cycle. I can't burn CD, so I'm trying to install Ubuntu 10.04 without cd or pendrive. I tried to install Ubuntu 10.04, using Ubuntu alternate cd and grub loader: [url] but it doesn't work (bugs in kernel modules) Is it possible to downgrade Ubuntu 10.10 to 10.04 without burning cd? Can i create new partition and house the installation disk?
View 1 Replies
View Related
Jan 26, 2009
I am unable to install fedora 10 (both Live_CD and DVD) as the screen freezes at the Login page in LIVE_CD and in the welcome page in the DVD installation. Anyway i have narrowed down the issue by goin via the forum. Issue is with the graphics card only. I have tried the following steps to get around this issue,try removing "rhgb" from the bootline - not worked xdriver=vesa - Worked, i got via the Login page in Live_CD but the desktop is not completely visible and its freezes. vga=ask - not worked as i dont know which option to choose try removing "rhgb" from the bootline I am using 845GV motherboard, onboard Graphics card.
View 1 Replies
View Related
Jul 26, 2011
copy a compact flash card with a form of Linux on it (Found out it was custom version based on Fedora Core 3). The flaky USB card reader seems to have hosed the flash card, it shows up with unknown volume after ejecting the card and reinserting it. My troubleshooting: I have Ubuntu on a flash drive that I used to start all this to read the flash card.
- I tried Disk Utility to reformat the card as Master Boot Record and the volume as ext3 with flag set to Bootable and copied the files using cp in command line.
- I tried ISO Master & mkisofs to make an ISO that the USB thumb drive tools can use, but it wouldn't copy all the files. Looks like symbolic links either were ignored or couldn't find the source file with -f.
- I learned that I might need a boot partition with a boot image, which I think I have in initrd-2.6.14.7img, but I don't know how to do that. Do I also need a swap partition?
My updated goal: using the files from the flash card, make a bootable compact flash card with Fedora Core 3.
View 7 Replies
View Related
Apr 16, 2011
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
View 9 Replies
View Related
