Fedora Installation :: 15 - Make A Bootable USB Drive Instead Of Using A Physical DVD
Jun 3, 2011
I downloaded the Fedora-15-i386-DVD.iso and want to install Fedora 15 from it. I don't want to use the LiveCD version since it doesn't have all the packages. So I follow the tutorial given here under the section titled "How to Make a bootable USB Drive to Install Fedora instead of using a physical DVD ". Everything finishes off well. However. when I boot my computer using the USB, it says "USB doesn't have operating system. Safely remove and reboot".
Now, what to do? I also didn't get the line the tutorial saying, "You should now have a bootable USB stick which will run an 15 install. When you boot the stick, you may also add askmethod to the boot line and select a hard drive install and select the drive as /dev/sdb1 (or your USB device drive) and the path should be / " What am I supposed to do?
I want to make a live USB drive, perhaps even 1 with its own GRUB and a choice of operating systems..Its 16gb so it will fit..or maybe just install multiple desktop environments so I can switch depending on the resoruces of the computer I am using..Gnome>E17>LXDE.But I want it to be a regular account with a root/administrator password, ect. When I use the Startup disk creator or Unetbootin I find that the results are pretty limited. I might as well be using a live CD, but thats not ideal. Alternately, when I just install normally it doesnt always load, even when I hit F8 and tell it to boot from my USB drive.Knoppix based distros seem to work better than Ubuntu based distros in this regard, but I dont want Knoppix I want Ubuntu/Mint and friends.Finally, I have sometimes been having problems 'mounting' or using 'swapon'. Even when I turn on Swap with Gparted Im still not getting the benefit of the large swap area I have created..is this because of how the operating system uses swap? Is there a live distro that will save files and settings to swap before using up ram, by default? If not, is there a way to change the behavior of Ubuntu Live CD?
Is there a reason why we cant make proper paragraphs? Is this site strapped for bandwidth or something? Is the site just acting funny?
I just brought a netbook(1005HA) and wanted to try out Ubuntu netbook remix 10.04 but I clean installed it.I like it but there are programs on Windows that I need to use for my HD2. My friend put a windows 7 .iso file on the netbook and I transferred the image to my USB drive to make a bootable USB but it does not boot. install Windows 7 from a USB using Ubuntu correctly?
I would like to install F12 to a bootable USB device from a working Fedora partition other than the liveUSB-creator option. Is there a way to do that from a working Fedora machine without have to burn a DVD? Seems like there should be but I can't find a guide for it.
My karmic ubuntu studio will no longer boot. I believe I may have intermittent hard drive issues. I've backed up all my important files so I'm not extremely worried; however, I would like to try to get my setup bootable once more. I've reinstalled grub, and on trying to boot, I get the grub kernel selection. Regardless of what I choose, the system won't boot. I believe grub is alright, but something else is not. What else could I try to make it boot again? I've mounted the drive, chrooted to it, updated and upgraded, but it still won't boot. I may be doing that wrong, or there may be something else I need to do.
How to make a bootable Windows7 usb drive from Ubuntu? I have a netbook, so there is no dvdrom drive, and need to reinstall on it Windows 7 how to make a bootable usb drive with windows 7 if i have Windows 7 ISO on my computer with Ubuntu.
I have FC12 image and I want to install it on my laptop using a pen drive so what steps should I follow. My Dell laptop has i5 processor. Currently I have windows xp on my PC so give me any link of software to make the pendrive bootable.
I have Orace linux .iso's on a memory stick. I could burn them to CD's and install linux from the CDs. However I would rather not waste 5 CDs and just install from the memory stick. How can I do that? How do I make the memory stick bootable? I did try changing the boot options but I could find the right one.
root@martin-desktop:~# tail -n0 -f /var/log/messages Jan 29 01:43:23 martin-desktop kernel: [440650.637531] usb 2-2: new high speed USB device using ehci_hcd and address 8 Jan 29 01:43:23 martin-desktop kernel: [440650.776107] usb 2-2: configuration #1 chosen from 1 choice
[code].....
When I set "USB flash drive" as a first bootable device in BIOS, I get SYSLINUX "boot:" prompt and it loads both "vmlinuz" and "initrd.gz", but finally I end up in BusyBox prompt and following message:
Quote:
"Check root= bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev ALERT! does not exist. Dropping to a shell!"
Last boot message which I see is "Attached scsi generic sg2 type 0".what might cause such behavior? Did I miss anything while preparing USB flash drive?
I have a USB drive of 4 GB and I want to make the drive as bootable. I used the command /sbin/mkbootdisk --device /dev/sdb1 "kernal version" ( sdb1 is my pen drive).When i ran this cmd,it gave me an error saying not enough space to write.
I am trying to boot from an external hard drive, and have tried to use unetbootin like I used when crating a bootable usb drive but it does not see my external and will not create bootbale iso for me to run from my external hard drive.
My Ubuntu system drive is starting to throw up S.M.A.R.T. errors. I have two partitions on the drive (/home and /) and grub in the mbr. Is there a way to exactly clone this drive to another one so I don't need to reinstall or re-setup anything?
Ive been running VirtualBox with a windows XP installation for some time, on an opensuse 11.0 host for some time. Recently, however ive been having issues with suse, and want to take my virtual XP and make it a primary bootable physical partition, on a second disk
I know it can be done, but im not finding how exactly.
What ive tried so far. I've taken VBoxManage terminal tool and converted the VDI to a .img file, and tried to move that to my second physical disk, but it didnt work at all.
After some thinking, I booted to acronis true image within my virtual machine, and cloned the C:/ drive of windows over to my second hard drive. That got me further, but doesn't boot fully. Comes up to windows xp logo, and black screen boot loops.
Ive heard about using vditool to create a .raw file, and then go from there, but im at a loss to find vdi tool
How can i move my virtual machine to a physical, bootable partition on a second drive?
I am currently using windows xp, but I have acquired another hard drive and wish to install ubuntu to it, unfortunately i do not have a working cd drive. I have loaded the newest iso in daemon tools and it asks me if i want to install it in windows, or restart my computer to do a full install. i wish to do neither. i want to install a full copy to my other drive with the virtual cd drive. I have found alot of help dealing with installing it on the same drive as windows or something that would require a floppy drive. this task seems like it would be alot simpler than installing on the same drive, buy maybe not. Did i miss a tutorial somewhere?
I want to be able to add a physical drive to an existing filesystem, and PRESTO! That filesystem has more storage and/or redundancy. When one of the physical drives eventually fail, no problem, Ive lost some redundancy, I just have to install a new drive before another one fails.Lets assume I have 4 physical drives.*What Is This Configuration? *[URL]...But I am unclear how to get a logical volume that is mirrored and linear.
The last time I tried software RAID 1 (dm-x) under lvm, it was very fragile. Systemd could not start it,and then an update to mdadm put a stake through its heart. So I know that does not work.
I have downloaded imgburn, then downloaded ubundo from hippo site. somehow sonic was also downloaded. I did not know what choice to make when it came time to burn a cd....now I can't get back to those choices....I am trying to make a bootable cd to install in a sonic laptop without an operating system. If by downloading ubuntu on my c/drive have I changed my os in any way...I have a hp compaq desktop computer using windows os..I am on a network with my husband
i have installed ubuntu on a virtual machine. i have also installed it on a hardisk partition. i have edited some package files and install the packages. it works great. now i want to ship this whole thing to my client. Can anybody tell me how could i make a bootable ubuntu cd so that my customized file are there in the cd and when the client installs ubuntu from this dvd he will get all the cusotmized packages preinstalled
I noticed that when using the "daily built images" from Squeeze via Netinst, during the disk partitioner, I am un-able to make the /boot partition bootable.or some reason I can't enable the 'boot' flag on several different ISO attempts and differenthardware vendors. The only thing I can see is that this is an issue with the netinst ISO image from the daily built images. Has anyone seen this or is this a known issue / bug? I don't want to file a bug report if possible but I searched and couldn't find anything on this. I doubt I am the only one who's experienced this so far.
Running Squeeze here. I added a new SSD to my system. Root is /dev/sda3 and I want to clone that system to the new SSD on /dev/sdb1 and make it bootable. I tried:
mount /dev/sdb1 /mnt/ssd_root cp -dpRx / /mnt/ssd_root
but to no avail. I cannot get the new system to be bootable and available through Grub. Part of the problem is that I do not know my way around Grub v2 so well, I could probably manage quite well with legacy grub. So, whats the easiest way to clone a system and make it bootable on another partition? Should I be using debootstrap, and importing/exporting the package list to install the same packages on the new system as the old? or is using cp -dpRx to copy the old ok? How do I make the new system boot?
If I dd copy a bootable usb drive to an iso will the iso be bootable?
I haven't tried it yet, but i'm going to. Heres the situation and tell me if I'm crazy.
I have several bootable CDs I use at work to do different things, so I went ahead and made a multi-boot usb stick with the isos on them and everything is golden. When i need something else, I am able to slap the ISO on the usb stick, edit the menu.lst and I'm good to go.
The problem is, for some of our equipment I have a bootable USB stick that I have to use. I tried copying the files on the bootable USB to my multi-boot usb and setup grub to boot it (which admittedly I'm no expert at), but have had no luck.
So now I'm thinking, I'll use dd to copy the bootable USB stick to an iso (using bs=2048) and then do my normal setup with an ISO and maybe it will work.
Is there any possibility to move my already installed ubuntu linux to the usb flash and make it bootable. So that it would boot on the other machine?I have an installed ubuntu karmic linux installed on my machine. I want to make it portable, to move it with all installed packages and tuned software to a usb-flash drive.
I am trying to install ubuntu 10.04 on my 1 tb my passport drive and am having loads of trouble. i am unsure how to format the frees space for the boot loader and main drive. Also what partitions are specific for ubuntu to function. This drive is formatted with masterboot partition and contains two other partitions for media and backup. The computer it will be mainly used on is a macbook pro with refit installed on it.
I've downloaded Ubuntu 11.04 and used the Windows tool to create a bootable USB drive on a Corsair 4Gb USB stick. On my desktop system I run Windows 7. However, after setting up my ASUSTeK Computer INC. M4A785TD-V EVO (AM3) board to boot exclusively from USB (removed the HDD as an option), my PC still boots directly to Windows 7.
I have a PC with no option for a keyboard. I have to install the operating systems without a keyboard or mouse.
I have to make a bootable USB stick which can allow me to connect to the PC from my Laptop with a VNC connection, then the complete installation using IP to IP. I did this with the following:
Download [URL] Extract the files of .iso to my laptop Add the manual file in CentOS-6.0-i386-minimal/isolinux/ks.cfg
install lang en_US.UTF-8 keyboard us timezone --utc Europe/Brussels rootpw --iscrypted $6$i5qEWD. selinux --disabled
[Code]....
This allows you to modify your original iso files with the new contents and pack it as one .iso file
Finally load unetbootin and burn to your USB or disk or CD
I am trying to install ubuntu netbook remix on acer aspire one netbook. I used the usb-creator.exe tool to make bootable usb drive. When I boot from the usb drive it comes up to the boot options screen. But when I try to either install or run ubuntu from disk it goes to a black screen and stops or goes to a page long error message saying "cannot mount drive" and a list of command options. I also am not sure if setup gives you the option to reformat the hard drive. Or if this has to be done prior to booting from ubuntu usb-disk.
