Fedora Installation :: Can't Create Bootable DVD For F13
May 27, 2010
I've successfully created bootable DVDs for several distros over the years. First, I downloaded F13 x86-64 the day of the release, checked the sha256sum against the CHECKSUM file (it passed), and burned a DVD. I see 5 folders and 10 files on it, as expected.I restart, and my PC (AMD Phenom 9600 quad, Gigabyte S Series GA MA69G-S3H motherboard) does not boot from the DVD, but from the hard drive.So I get into the bios, check to make sure that the boot order is correct (it is) and try again. No joy.
Next, I assume I screwed up, had a bad burn, down load and burn again, checking everything. Still won't boot from DVD. Try getting the ISO from torrents, (checking sha256sum all the while), burn my 3rd DVD (using Brasero this time) and - same problem.Now I assume I have a hardware problem, and for grins, put in the F12 ISO DVD. It boots from there just fine.So I don't have a hardware problem, and I seem to have 3 good burns, but it's not recognized as a bootable DVD.
View 14 Replies
ADVERTISEMENT
Oct 2, 2009
This is the first time that I try to install Fedora 11 to my Cd-driver-less notebook. I try to boot from my USB stick it did not work. For me, only feasible solution is to boot from HDD.
However, how do I create bootable HDD from Fedora 11 live CD? I have already downloaded and burnt Fedora-11-i686-Live.iso to a CD. Since I cannot boot from my CD, I need to boot from the HDD. But how?
Also some additional info: I have already formatted my notebook's HDD by hooking it to my PC. So I can only access my notebook's HDD from my PC (winXP installed) As far as I can guess, I need to partition and format my notebook's HDD based on fedora's requirements. (I do not know how?) And copy some boot and installation files to these partitioned disks. (don't know neither)
View 7 Replies
View Related
Feb 8, 2011
I downloaded fedora14 iso and burned it straight to a cd but on reboot, it booted from my hd. My bios is set to boot from cd first.Next I extracted the iso to a subdirectory and burned that to a cd, creating a boot disk using the img file in the [BOOT] directory. When I rebooted, I got a cursor in the top left corner of the screen and nothing else
View 3 Replies
View Related
May 15, 2015
I'm having a problem creating an USB bootable pendrive, with Debian Jessie stable. I've downloaded the ISO from the site (I have tried with two versions, netinst and gnome). I tried to create the bootable pendrive with the command dd.
Code: Select alldd if=debian-etcetcetc.iso of=/dev/sdb
I put two pendrives that i've dd'ed them on the usb ports, and then typed fdisk -l, it returned this:
Code: Select allDevice Boot Start End Sectors Size Id Type
/dev/sdb1 * 64 2978975 2978912 1,4G 17 Hidden HPFS/NTFS
Disco /dev/sdc: 7,3 GiB, 7784628224 bytes, 15204352 setores
Unidades: setor de 1 * 512 = 512 bytes
[code]...
However, i tried to boot this two pendrives in three PCs and it was not recognized by anyone as bootable system.
View 12 Replies
View Related
Jun 6, 2011
I have a WinXP ISO file and was wondering which is the most noob friendly way to creating a bootable USB with it to re-install XP onto my netbook via Ubuntu 11.04.I haven't found any tutorials out there explaining anything on the lines of this.
View 3 Replies
View Related
Mar 28, 2010
I have a iMac G5 and an eeepc 1000 netbook, and I would like install Fedora 12/13 on it. I have downloaded the Fedora-12-DVD.iso, now that .iso is on my Mac, and I would like to create a bootable usb(8GB) on Mac using the iso file. I did find a few instructions on how to do this in Mac OS X [URL] however, they were concerned with .img files. If I am to expand the iso file I can see several .img files in the img folder and a few in other folder, which do I choose? The obvious choice seemed to be install.iso but it was only 166MB so I thought the whole system could not, possibly be fitted into such a file.
View 4 Replies
View Related
Feb 11, 2016
Every time I try to create a bootable USB on my sid boxes, it comes out corrupt. I'm trying to use a multi-arch netinst iso so I can back up my tablet. Anyway, I use
[code]
# cp debian-8.3.0-amd64-i386-netinst.iso /dev/sdf
[code]
And it won't boot, so I checked the drive with gparted on my desktop, and get some errors about invalid block sizes and corrupt partitions. When I try fdisk, it lists an EFI partition as I would expect, and then another partition with the right size, but its listed as type empty. I also get some invalid size errors there. This happens with an older iso I have successfully used in the past. When I run fdisk on the ISO file, I get the same errors as the USB drive. Here's the output
[code]
daniel@frakenstein:~/Downloads$ sudo fdisk -l ./debian-8.3.0-amd64-i386-netinst.iso
Disk ./debian-8.3.0-amd64-i386-netinst.iso: 556 MiB, 583008256 bytes, 1138688 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
[Code]...
I think my issue is with the message about 2048 vs 512 byte block sizes. I tried setting up partitions on my drive and just copying data to them from the iso. This makes the BIOS recognize the USB disk and it tries to run the bootloader, but fails since the symlinks are messed up copying that way. I've tried a few different boxes (all running sid) and I get the same results on all of them.
View 6 Replies
View Related
Apr 18, 2011
How can you create a bootable WindowsXP cd from ubuntu???
View 2 Replies
View Related
Jun 21, 2009
I have downloaded a bootable DOS iso CD image that I have burnt to CD and can boot from.I need to add more disk checking utilities to the CD iso image.The DOS disk checking utilities are designed to be run from a floppy disk, but my laptop does not have a floppy drive, so CD-ROM is an alternative, if I can remaster the existing iso image file?Can I mount the DOS iso file and then add other programs to it, and then remaster the updated iso, and make a new CD-ROM to boot from with the added tools?
View 3 Replies
View Related
May 4, 2010
How Do I Create Bootable USB Installation For NetBook ?
I am going mad!
I am trying to make a bootable USB installation
so I can try OpenSUSE 11.2 on my NetBook with no CD/DVD drive.
I've Google'd for hours and tried different things
but I can not make a bootable USB of OpenSUSE 11.2.
I am running Ubuntu 10.04 now on my main desktop
and Ubuntu 10.04 now on the NetBook,
but have access to a Windows XP computer too...
View 2 Replies
View Related
Jun 3, 2010
I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error.Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR):Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader.Partition 2 (ext3) - Ubuntu Linux 64 bit.Partition 3 (fat32) - contains data.What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it?
View 1 Replies
View Related
Jun 19, 2010
I am trying to install Ubuntu Netbook 10.04 on my eee pc. I have a macbook pro with built in SD card reader and a 4 gig sd card. I followed the instructions on the ubuntu netbook download page to create the bootable usb media and it appeared to work, but was not bootable for either the eee pc or the macbook.
I also posted under the apple section of the forums here: [URL]... I also tried using VirtualBox to create a virtual machine that I could install ubuntu directly onto the SD card, but VirtualBox can't work with the built in SD card reader apparently.
View 2 Replies
View Related
Jul 21, 2010
Ive installed and have up and perfect a copy of ubuntu, thing is i need windows for recording and xna, i want to make a installer from usb as i havent one cd or dvd i can use for installing and all the quick fixes seem to be either in linux to make a linux usb installer, in windows to make a linux usb installer, or windows to make a windows installer, but i cant seem to find one for linux to make a windows installer, as in i would like a linux program to create a bootable usb of windows of a iso i already have.
View 4 Replies
View Related
Jul 28, 2011
I am using Ubuntu 11.04 on my sisters computer which I am borrowing until my laptop gets fixed by Dell *sigh*
The only catch was that I had to remove the virus thats been plaguing this computer any means necessary my plan was to delete the windows 7 partition and put Ubuntu in its place temporarily.
My sister didn't have the Windows 7 DVD that was given to her *sigh again* but she did still have the key labeled on the side of the machine. So my plan than included to download that .iso of Windows 7, and then use setup.exe.
View 4 Replies
View Related
Oct 24, 2010
So since i deleted a necessary package my redhat system crashed. Now, when i had initially installed redhat using a friends disk I copied all the files from the CD-ROM on my external hard drive (of course after installing through the CD)
Now I need to re-install linux and I have no idea how to actually use those files to create an actual automatic bootable installation CD?
View 2 Replies
View Related
Jul 28, 2011
All of my PCs are set up to either run Ubuntu directly, or are dual boot Ubuntu and some variant of Windows. One of the things I like about this is that in the rare instances that I get a virus I can simply boot into Ubuntu and run ClamAV to remove the virus from there.
I have a friend who recently picked up a nasty virus and we are having a hard time getting his machine to boot at all without all sort of strange behaviors. Under that scenario I can't trust Wubi to work correctly. Soo....
Is it possible for me to create a bootable CD, DVD or USB drive from my machine? I'd like to use my machine because I can update the virus definitions before I create the image and then use that to clean his machine.
View 8 Replies
View Related
Apr 18, 2015
I have created a bootable USB with PowerISO in Windows 8, and the device is now booting. Why any of the solutions below creates a bootable ISO correctly? I would like to know what to do in case I have to create a bootable ISO again, but without using Windows. I have been searching about this, but I couldn't manage to find the solution.
System: ASUS laptop, Debian 7.8 Wheezy, Secure Boot disabled, Fast Boot disabled..I'm trying to create a bootable USB from an ISO image. The ISO image is PelicanHPC, a Debian-live based clustering distro, to create a home cluster with some computers just to try how it works.I have tried several ways of creating the bootable USB.
* Unetbootin
The Unetbootin loader is showing Default but when I press ENTER it will only show the same loader, not loading the kernel.
* dd and cp
I have tried dd standalone, and also as I could see in other websites, using isohybrid first on the ISO. I have tried setting/not setting as bootable partition /dev/sdb1 in fdisk. Using default bs and bs=4M too, without success.
I have tried running cp isoimage.iso /dev/sdb1, without success booting.
Then I tried booting the ISO image without USB from the local hard disk.
* grub-imageboot
Adding the ISO image to /boot/images and then running update-grub, but then, it won't boot, it keeps loading for a long time, 15 minutes, showing the splash image of the default grub (Debian's bootloader). I could read in the docs that it does not boot every ISO images.
* adding manually a menu entry to GRUB
I have created a loopback to the iso file and then loading the kernel (linux and initrd.img). This way, it loaded correctly, but when loading the system, an error message was displayed (unable to mount aufs on /root: No such directory) then kernel panic. A shell is prompted, if I do ls, it will display several directories, /root among them.
In boot.log there are 2 messages:
[code]....
I will try now the Unetbootin version from another computer that's running Debian 8 Jessie. There is not any unetbootin package in Debian 8 Jessie.
PelicanHPC is not too old distro, it dates from late 2013.Booting the ISO in a QEMU virtual machine boots and functions correctly, I even created a new virtual machine that boots from PXE and add a node to the master system.
View 14 Replies
View Related
Mar 3, 2010
I am running ubuntu 9.10 on my pc, trying to update the bios on a thinkpad a31. I'm trying to create a bootable iso disk from the downloaded file from ibm (spsuiv69.exe) it is currently sitting on my desktop.
To be clear - I am having trouble making the .exe file an iso. I read this is the best way to update bios on a linux machine, if there are better ideas - whatever works.
View 9 Replies
View Related
Jun 13, 2010
I lose my W7 DVD a couple of times and im tired of making DVDs when i can just create a Bootable USB but the only thing wrong is that i know of ...you can only create Ubuntu USB in Ubuntu.... In Windows you can create a Windows USB with progrmas and UBuntu as well... SO since windows can make multiple USB bootable... Does Ubuntu have a Program that will allow me to Create a Bootable Windows 7 USB?
View 9 Replies
View Related
Aug 19, 2010
how to write bootable cd i want to write xp in my cd how can burn that to format my system
View 1 Replies
View Related
Oct 12, 2010
how to creat a bootable pen drive of ubuntu 10.10???
i can't make bootable usb flash drive of ubuntu 10.10 useing "Universal-USB-Installer-1.8.0.4" as [URL]. how can i make a bootable ubuntu 10.10 using my pen drive. i have the .iso file.i don't want to burn it into cd.
View 1 Replies
View Related
Nov 4, 2010
Running: Ubuntu 9.04 32 bits I'm trying to create an bootable usb drive for installing windows 7 so i took this release"Microsoft.Windows.7.Enterprise.x64.Integrated.Oct ober.2010-BIE"
1. Extracted to get the iso
2. Formated my 8gb usb flash drive with gparted
3. Extracted all the files from the iso with UNetbootin to my usb stick
4. Restarted and selected boot from removable drive in the bios options
After step 4 nothing worked i tried to remove booting from the hdd to force the computer to boot from the usb drive but just get the message that i need to insert an bootable media or restart.
Tried several times and the usb worked propperly while installing ubuntu 9.04 which I run this writing moment. I'm out of ideas and I don't have an cd/dvd reader to boot an dvd from either so via usb is the only thing my knowledge is capable to.
View 8 Replies
View Related
Feb 27, 2011
ok so i want to create a bootable CD containing some usefull progs.. ie gparted live / clonezilla live / Memtest etc.... how would i go about making this cd with a choice window to select what application i want to run ?
View 7 Replies
View Related
May 4, 2011
I followed the directions on the Ubuntu site and on the forum but am still unable to make one.I used the Universal USB installer (as directed by the Ubuntu download page) and the unetbootin utility as found on a thread in the forums. To ensure that it was not the USB drive, I've used a Kingston drive and a SanDisk drive. Both report "no Operating System found" when attempting to create the drive.I'm using Win7 x64 to create the bootable drive, and ubuntu-11.04-desktop-i386.iso as the image.
View 3 Replies
View Related
Feb 13, 2011
is there any kind program works under ubuntu, like nlite for windows? i need to create a windows xp bootable cd.and need to add sata drivers in this cd.
View 3 Replies
View Related
Apr 30, 2010
I am in the process of creating for the very first time Kickstart bootable CD.Anyone have any quick tips or level of details to create this process? I am new to Linux and doing this for the very 1st time, so please give me as much info as possible
View 7 Replies
View Related
Jul 28, 2011
I downloaded clonezilla's .iso file. But I can't seem to burn it in bootable format.
What's the easiest way to make and burn and .iso image ?
it was easy with Nero, but I no longer have that sw.
View 3 Replies
View Related
Mar 25, 2010
I have a customized XP installation disk created for my company. However, my office does not require several of the applications that are installed by default. Also, some configuration settings are incorrect. I have extracted the XP installation files and can perform an install using those files from a running system, but I cannot boot from the CD.
I have tried just about every suggestion I can find on the net except purchasing a third-party burning application to do this. I tried burning both CDs and DVDs using floppy boot images, but XP will not install in a "DOS environment". I've also tried ripping the boot sector directly from a bootable CD/DVD and using that without success. Finally, I ripped ISO images and tried ripping the boot sector from those, also without success. I've also tried various file system type settings in K3b, including Joliet, Linux/Windows, UDF, and DOS compatible, all without success. Surely there must be a way to do this?
PS--I tried posting this to the K3b mailing list first but was rejected, even after creating an account with Sourceforge!? Didn't want to have to submit a support request just to submit a support request.
View 3 Replies
View Related
Feb 26, 2010
I'm just interested if there does exist any utility for creating bootable flash drives? I mean, if I could make somehow LiveCD with KDE desktop on openSUSE? I used Ubuntu and it had it's own utility with nice GUI, it just needed any bootable .ISO file or bootable CD/DVD and it created LiveCD on USB flash drive. So is there any chance to find something similar?
I work in a computer service center and it'll be very helpful (I think) to have bootable USB Flash dive with operating system to log into dead operating system partitions. Of course I have Windows LiveCD, but it has as much bugs as it's parent big brother.Oh, I forget to post my operating system versio. I'm using openSUSE 11.2 x64 with KDE version 4.3.5
View 7 Replies
View Related
Mar 17, 2010
I want to install SLES11 with my usb key but I couldn't to make it bootable. Because my server are only a cdrom drive, not dvd... I read the following document : SuSE install from USB drive - openSUSE but it doesn't run! So I can mount/umount the usb and linux could see him:
Code:
mount /dev/sda /mnt/usb
but the fsck.vfat doesn't run :
Code:
fsck.vfat /dev/sda1 open /dev/sda1:No such file or directory
View 2 Replies
View Related
