Ubuntu :: Packages Part Of Iso Image File Installation
Feb 24, 2010
When I look in /var/cache/apt/archives/, I see packages I recognize that I downloaded. But, I also see packages that I know I did not download, but rather were part of the initial installation of the image iso file on the CD. For example, the package for Abiword is in there. I would like to know which packages in this directory I installed, and which were part of the initial installation.
How do I know which packages are part of the installation from the image iso file on the CD? Once I know that, I would make a copy of all the other packages in this folder onto a DVD, so if I ever need to reinstall Ubuntu 9.10 I will know which packages to install over and above those part of the initial installation off the iso CD.
I just used dd to clone a linux partition to a new hard drive, it had 800mb left on the old hard drive, after dd, new hard drive lists 1.29/1.3 terabytes full. Is this what happens by default in dd? How can I fix this?
how to add packages to an existing Ubuntu ISO or LiveCD (Think like slipstreaming Windows Service Packs into Windows installation CDs, if that helps). I want to add things such as more games or the restricted extras plugins so that I don't have to go get them every time I install the OS on someone's computer, things like that. Not as important, but if it would be possible to remove packages
PS I'm not necessarily looking for a specific version, but I'm currently running 9.10 on one machine and 10.04 (soon to be 10.10) on another. A guide for any Ubuntu distro would be fine though. I'm just as interested in learning the theory of it as I am the actual execution.
I am trying to upload some pics on my Facebook account using Firefox. When I click on Facebook's file upload icon, Firefox bring up a 'File Upload' window. I noticed that smaller image file is previewed on the lower right hand corner, while bigger image file is not. Is there anyway I can change this behavior or maybe change what Firefox is using to browse my files?
I have a dd image of a full drive (as a file) that was using Truecrypt system encryption under windows. I want to mount the main partition from that image using Linux's Truecrypt. I am familiar with dd loopback devices and have the partition offset, but I don't know how I can mount it like this because I need to use the truecrypt command.
Is there perhaps some way to create a fake device file for the disk image that I can mount from within Truecrypt?
I am trying to uninstall the packages that were installed as part of kubuntu desktop. I have gotten ~3 quarters of them, but didn't know if there was a better way than trying to pore over synaptic.
I did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.
I'm using Ubuntu for about a half year. Currently version 10.10. The next problem I have with Nautilus: He have it in ListView. If I want to rename a file then the entire file is selected and not only the first part. So the file extension is also selected. I think this is a bug, whoich can be found on the Internet, but I do not find a solution. Does anyone here have a solution?
I have a .txt-file with ~50.000 lines of numbers, generated by a mathematics program. From this file, I need line ~ 1.100 to line ~16.000 (these lines are always the same btw, this may make the solution easier, dunno) to be copy/pasted to another file, where the lines ~500 to ~15.000 (also, every time the same) should be overwritten by the aforementioned lines...I haven't found or come up with anything that works yet, mostly I find solutions to copy everything from one file to another but I can't find something to specifically overwrite a part of a file with part of another.
Can I install ubuntu to an image file? I am using GRUB to boot my live cd, so is there a way to trick the installer into picking up an image file as another hard disk, like it is in wubi? (I am using mac)
The DVD disk is from LinuxFormatMagazine, and PCLOS is the ISO that boots. It has 10.10 on it also, but that isn't the ISO that loads by default. Do I have to transfer the 10.10 file, and burn it to a new ISO? Or can I run or install it from its' current file type on the DVD?
I get a box from update manager listing all the updates that it think I should download. I try to, and I just get this message afterwards, "Failed to fetch [URL] Hash Sum mismatch". Any solutions?
Edit- I'm running on Ubuntu 10.10 if that's any help.
I put Ubuntu on my computer about a week ago, and have not been able to download many new programs or updates. For expmple, I'll go over to Update Manager and try to install something, but it will stop usually halfway through or near the end and show me an error message. usually, the message looks like this:FAILED TO DOWNLOAD FILE PACKAGESCheck your Internet connection
Details: Failed to fetch http://us.archive.ubuntu.com/ubuntu/...u10.2_i386.deb Hash Sum mismatch Failed to fetch http://us.archive.ubuntu.com/ubuntu/...u10.2_i386.deb Hash Sum mismatch
I created an image disk of my installed packages with APTonCD, then I burned a CD in order to install these packages on my not internet connected PC.I typed: sudo apt-cdrom add wich added this line in source.list:
Code:
deb cdrom:[APTonCD for ubuntu lucid - i386 (2010-06-22 22:26) CD1]/ /
then:
Code:
sudo apt-get update
But now if I want to install a package sudo apt-get install xorg for exemple, I have many lines of errors like:
Code:
Impossible to retrieve cdrom:[APTonCD for ubuntu lucid - i386 (2010-06-22 22:26) CD1]/packages/package_name.deb What's that problem ?
Before installing Centos, I downloaded an image file and burned it to CD using InfraRecorder. It starts to run but does not complete. My machine is a new Intel Q6600 Core 2 Quad CPU with 4G of RAM. It is a 64-bit machine, and I used the 64-bit image. After Centos (which I tried first) failed, I then tried (using the same burning software):
o Slackware o UBuntu o gNewSense o Knoppix o Debian o Fedora o Suse o BSD o Solaris 0 puppy Linux
Most failed similarly to Centos. Knoppix worked fully several times, but I was not enthusiastic about installing it, and eventually (on the 5th iteration), it started to fail in a way similar to Centos, and continues so. Solaris and PuppyLinux worked. Those that failed, failed while attempting to start the 4 CPUs. Solaris and Knoppix (when it worked) succeeded in starting all 4 cpus and I could see the messages.
How to communicate what's happening during a failed boot? Finally, I hit upon the idea of photographing the screen during the failing part of the boot; the file is attached. The photo shows the screen just before it blanks, and the BIOS resets for another try. Please let me know if I can collect any other information. I would like to use Centos as a dual boot on my shiny new machine.
I'm trying to figure out how to access the local part and the domain part of an email address in postfix's main.cf. For example, myname@mydomain.net has myname as the local part and mydomain.net as the domain part.I get the whole email address with %s. I want to speed up the lookups by writing better database queries.I've had no luck finding this in the otherwise well documented postfix.
I know that the question could sound weird but...I was wondering if is possible to download one or more parts of a file.
For example, the first 10 mb, or the latter ones.
I know that there are some apps that let you do segmented downloads, but, is there anyone that let you choose the segment to be downloaded? If not, can this be accomplished with any linux command-line application?
we have access to one domain name , 1 internet ip address and may servers hosting different part of site. I want them all to be accessed via same web site . some of the server in our network are embedded devices.they have their specific utility being hosted on that machine. So the severs are bound to be distributed . I just wanted to know how can I access them via single ip, domain name.
As I understand it creating an image of a Linux system makes an exact copy of the OS and any user files/configurations/programs etc. What i would love to do is create an image of my work PC and install it at home on my desktop. Can someone briefly explain the process of creating and installing images of Linux systems?
Home OS - windows Want - An image file that can be executed in a virtual machine(VMPlayer or VirtualBox) or booted directly on my home PC.
I downloaded a .gz file. The network was disconnected a few times during downloading. I resumed the download each time with wget -c option. However after all the downloading is over, an error occurs when I try to extract the .gz file. Is there any way I can download only the missing part of the file?
In bootseqence of linux, the first step is check the CMOSRAM(size 64bytes) setup for custmor setting. So i am just confused wether CMOSRAM is a part of motherboard or is a part of RAM itself.
I have this string ./DAT000728-652523058.job.I want to extract the no between DAT and - sign. I want 728. I dont want 000728.echo ./DAT000725-560162365.job | cut -d'T' -f2 | cut -d'-' -f1 I am getting 000728.string can be ./DAT326822-652523058.job also. then i need 326822
There are a few things I was wondering about (using tools available in bash):How to insert a file at at the specified location of another.How to copy a portion of a file between two lines matching a regex to another file (and/or making sed only work between two lines matching a regex)How would you do this?
Morning all , not sure how to put this. I have a .sh executable script I use for video encoding. I want the system to be able to see it no matter where in which folder I am. I want to be able to execute that script in terminal in any folder. How can I make it part of the system path. ? Don't know if my wording is right but I think you guys know what I mean.
when I try to install anything using the Ubuntu software centre, I get the following message Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources.
I am new and recently almost one month back installed debian linux stable 8.2 came from windows. Today I upgrade my debian stable 8.2 to testing and everything works fine. Just one thing is that I checked kernel and find :
uname -r
4.2.0-1-amd64
dpkg --list | grep linux-image
ii linux-image-3.16.0-4-amd64 3.16.7-ckt11-1+deb8u5 amd64 Linux 3.16 for 64-bit PCs ii linux-image-4.2.0-1-amd64 4.2.3-2 amd64 Linux 4.2 for 64-bit PCs ii linux-image-amd64 4.2+68 amd64 Linux for 64-bit PCs (meta-package)
I am first time removing old kernel so cant take risk from searching the solution from google so come here, what and how to remove that includes everything like kernel image and other old kernel files not needed.
One more thing I just realised and saw on details in settings gnome that
Base : Debian GNU/Linux stretch/sid 64-bit
Is this right as it says sid in the line but i just changed my sources.list to testing only and then aptitude upgrade and full-upgrade then just.
anyone knows of a software to take a snapshot of part of the screen and save it as a pdf file. I have KSnapshot installed but this only allows saving image files.
I want to read values from a file...these are basically one word values, that is to say that the text file I want to read from contains lines of word length 1, as in:
