Fedora Installation :: Turning *.iso Into A Bootable CD?
Feb 27, 2009
I downloaded the *.iso for a Fedora 10 Live KDE installation. It is currently on my hard drive. I tried burning it to a CD with Roxio using two different methods. The first one was not a bootable method. So I checked the Roxio documentation and burned the image that way. In burning an *.iso to a bootable image on a disc, Roxio asks for three different file types, none of which are *.iso. I selected my *.iso because that was all I had. Then I burned it as a bootable to a CD.
When I tried to boot it, I got a black screen with a message at the top left reading something like there was no operating system available. I thought that was strange, and I do not know what to do.
View 8 Replies
ADVERTISEMENT
May 27, 2010
I've successfully created bootable DVDs for several distros over the years. First, I downloaded F13 x86-64 the day of the release, checked the sha256sum against the CHECKSUM file (it passed), and burned a DVD. I see 5 folders and 10 files on it, as expected.I restart, and my PC (AMD Phenom 9600 quad, Gigabyte S Series GA MA69G-S3H motherboard) does not boot from the DVD, but from the hard drive.So I get into the bios, check to make sure that the boot order is correct (it is) and try again. No joy.
Next, I assume I screwed up, had a bad burn, down load and burn again, checking everything. Still won't boot from DVD. Try getting the ISO from torrents, (checking sha256sum all the while), burn my 3rd DVD (using Brasero this time) and - same problem.Now I assume I have a hardware problem, and for grins, put in the F12 ISO DVD. It boots from there just fine.So I don't have a hardware problem, and I seem to have 3 good burns, but it's not recognized as a bootable DVD.
View 14 Replies
View Related
Jun 24, 2010
I need to install fedora on my new 16 DELL servers. I will doing it through DRAC (Dell remote access console) but DRAC can mount only one ISO at a time. I am planning to do multiple installations at the same time.hence i need multiple boot.iso files for each and every DRAC console that I open for each server.The question is...How to extract just the bootable part from the fedora DVD? I don't whether it should be called boot.iso, but I hope you get my point.I believe it has got something to do with the "isolinux" folder on the DVD, but I don't know what and how.
View 4 Replies
View Related
Feb 17, 2009
I'm a newbie to Linux and FC10. I recently installed FC10 on my laptop which has the following config:
AMD64, 1gb DDR2 RAM, 60 GB HDD, DVD Drive and ATI Chipset.
The problem is FC10 locks up randomly and I have seen a couple of threads on this. I want to uninstall FC10. However I'm unable to uninstall / remove the partition. When I try to boot up my laptop using a Windows CD (planning to remove the linux partitions from the WINdows setup) I only see a blank screen, the DVD keeps on spinning but nothing happens. I have tested the windows xp cd on other machines and works fine.
View 2 Replies
View Related
Oct 2, 2009
This is the first time that I try to install Fedora 11 to my Cd-driver-less notebook. I try to boot from my USB stick it did not work. For me, only feasible solution is to boot from HDD.
However, how do I create bootable HDD from Fedora 11 live CD? I have already downloaded and burnt Fedora-11-i686-Live.iso to a CD. Since I cannot boot from my CD, I need to boot from the HDD. But how?
Also some additional info: I have already formatted my notebook's HDD by hooking it to my PC. So I can only access my notebook's HDD from my PC (winXP installed) As far as I can guess, I need to partition and format my notebook's HDD based on fedora's requirements. (I do not know how?) And copy some boot and installation files to these partitioned disks. (don't know neither)
View 7 Replies
View Related
Dec 23, 2009
I would like to install F12 to a bootable USB device from a working Fedora partition other than the liveUSB-creator option. Is there a way to do that from a working Fedora machine without have to burn a DVD? Seems like there should be but I can't find a guide for it.
View 3 Replies
View Related
Apr 23, 2010
I downloaded 64-bit fedora12 iso DVD image and created a DVD. When I tried to boot, the CD does not boot. I checked the documentation to see whether book.iso or any other file needs to be copied along with. My question is:
- What are the files I need to copy to a DVD for the DVD to boot up straight up from the DVD...?
- If not, is there another way to get this fresh installation done.
I have 32-bit Fedora 11 installed in a machine, but need 64-Fedora to do some testing, before going with RH Linux.
View 7 Replies
View Related
May 29, 2010
I am trying to set up an old server to run Fedora but I am having an issue I cant seem to fix. This Is the skinny. I have tryed with 10,11,12,and 13 and get the same result. I can load the live disk and do the install and it finishes but when I restart, The system does not see the HDD as bootable. But hears the strange thing. I can take the drive out and put it in my desktop and it boots fine. I also have been able to put suse and ubuntu on it without any trouble. I cant figure out what the difference is with Fedora.
View 4 Replies
View Related
Aug 29, 2010
I am using a 8 GB usb flash to create a F13 Live Media. I created it using the livecd-creator. But when I use it to try to boot, it says "No bootable partition in table". What's wrong? I did some searches on google, but didn't find a solution.
View 7 Replies
View Related
Nov 10, 2010
I am trying to install fedora 14 from live CD (USB boot) in my system which already has Windows 7. The installation goes fine however when I reboot the system I get 'No bootble device found' error. install fedora on the entire hard disk which I cannot do right now.
In Bios there are 'Native' and 'Legacy' options for 'ATA/IDE Mode' and if I select 'Native', 'Configure SATA as' option is enabled with options 'AHCI' and 'IDE'. I reinstalled fedora with all possible configuration, Legacy mode, Native + AHCI, Native + IDE but got the same error when booting. I have also tried options; MBR on /dev/sda and first boot record on /dev/sda5.
fdisk -l :
Device Boot Start End Blocks Id System
/dev/sda1 2048 78782463 39390208 5 Extended
/dev/sda2 78782760 211897349 66557295 7 HPFS/NTFS
[Code]....
View 1 Replies
View Related
Feb 8, 2011
I downloaded fedora14 iso and burned it straight to a cd but on reboot, it booted from my hd. My bios is set to boot from cd first.Next I extracted the iso to a subdirectory and burned that to a cd, creating a boot disk using the img file in the [BOOT] directory. When I rebooted, I got a cursor in the top left corner of the screen and nothing else
View 3 Replies
View Related
Jan 12, 2010
I have downloaded Fedora-12-x86_64-DVD.iso. Now I want to create a bootable USB from the downloaded ISO file. I tried with the latest version of liveusb-creator 3.9.1. I am unable to do so. It took around 3 days to download the iso file and now I cant even use it.
ERROR MESSAGE::
Fedora-12-x86_64-DVD.iso selected
Verifying filesystem...
Extracting live image to USB device...
Wrote to device at 1 MB/sec
Creating 100MB persistent overlay
LiveUSB creation failed!
Here is the screen shot....
View 5 Replies
View Related
Jun 3, 2011
I downloaded the Fedora-15-i386-DVD.iso and want to install Fedora 15 from it. I don't want to use the LiveCD version since it doesn't have all the packages. So I follow the tutorial given here under the section titled "How to Make a bootable USB Drive to Install Fedora instead of using a physical DVD ". Everything finishes off well. However. when I boot my computer using the USB, it says "USB doesn't have operating system. Safely remove and reboot".
Now, what to do? I also didn't get the line the tutorial saying, "You should now have a bootable USB stick which will run an 15 install. When you boot the stick, you may also add askmethod to the boot line and select a hard drive install and select the drive as /dev/sdb1 (or your USB device drive) and the path should be / " What am I supposed to do?
View 1 Replies
View Related
Dec 19, 2010
I have just finished installing 10.04 on my EEE 900A. Stuff works flawlessly insofar as I can tell. The one remaining thing I am still trying to figure out is how to turn_off the touchpad. Is this doable with some utility that I can grab from Some repo??
View 1 Replies
View Related
Jun 8, 2010
I want to install ATLAS on my laptop to do this i have to turn of cpu throttling.
View 4 Replies
View Related
Jan 11, 2011
I am looking to turn off Plasma Workspace and keep it off! Today I was informed by a family member that their desktop had drastically changed. After investigating this, I had noticed that they were now running what was called Plasma Workspace. I am truly baffled right now as to how this was activated/turned on for only 1 out of 5 users on my computer. None of them are computer savvy, so it would also help me out considerably if I knew how this was turned on without the use of the terminal.
View 4 Replies
View Related
Jun 17, 2011
I searched and only got the screen program, and the drop down menu only shows options from 1 min to 1 hour.
View 6 Replies
View Related
Aug 16, 2010
I just installed Mythbuntu 10.04 and have my Sony LCD TV connected via a DVI to HDMI cable. The issue I am encountering is that everything works fine until I turn off the TV and turn it back on later, because the screen stays blank and from what the TV tells me there is no signal. I have no idea what can cause this. I checked the TV settings in terms of power saving and turned it all off. I turned off the screen saver in Ubuntu, but still the same issue. My motherboard uses the ATI HD4200 onboard graphics engine
View 1 Replies
View Related
Aug 24, 2010
Im trying to maximize my network connectivity. To do this I have begun using the program ethtool. The first thing I did was run
Code:
#ethtool eth0
which informed me Im running 10BaseT mode. So i though, ok, that has to do with the autoneg right?
so I ran:
Code:
# ethtool -s eth0 speed 1000 duplex full autoneg off
[Code]...
LOLz, I got it now, This computer has 2 nics installed! Thats why the link stat was "Link detected: no"
I moded my code to pertain to eth1, the connected port. Eh, anyhow, Im still not sold on this problem being solved, the connection eth1 seems to work fine at 100BaseT/Full but I loose connectivity when trying to use 1000BaseT/Full despite the nic showing it as a supported mode.
View 4 Replies
View Related
May 1, 2011
I have a Hewlett-Packard HP Pavilion dv6000. I had no issues before the upgrade, but after, my wireless driver refuses to turn on the wireless at all. I've seen in most of the posts, people can see the wireless networks but not access them. I can't even get my little orange wireless (off) light to turn blue (on). The "additional drivers" option in "administration" was a bust and I've tried reinstalling the kernel from my original disk iso.
Here is my wireless info:
Code:
03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
I currently have the STA broadcom driver enabled and all I can do is use a cable for internet right now.
View 2 Replies
View Related
Jun 5, 2011
Under Gnome2 you were able to stop the OS from turning off the screen by selecting "never" as the time to turn off the display when the computer was idle. This was found under the screensaver configuration.The screen tool for Gnome3 does not offer "never" as an option. Does anyone know how to stop Fedora 15/Gnome 3 from turning off the display?
View 14 Replies
View Related
May 3, 2010
I have installed Lucid Lynx and have spent some time setting it up to my liking. I normally use PcLinuxOS and it has a GUI application (mklivecd) that lets you make a LiveCD out of your installation, is there an equivalent in Ubuntu?
View 1 Replies
View Related
Jun 13, 2009
I'm installing Fedora 11 x86_64 from the DVD iso. The SHA256 checksum was fine, and the media checked out fine just prior to install. The F11 install seems to go perfectly and I get all the way through the installation. However, on reboot, I get this message, "No bootable device -- insert boot disk and press any key"!!!!I'm installing to an old Intel 975XBX2 motherboard with 4GB of memory, which I have used successfully, flawlessly for every single Fedora install since F6. I've only been using one hard drive with a FAT32 partition, and an NTFS partition for Windows XP, the remainder of the disk is Fedora.I've probably tried this F11 install about 8 or 9 times already with no success; actually, the installation seems to go perfectly, but I just cannot boot the PC. I think there's something wrong with GRUB being written into the MBR of the hard drive, because I cannot boot DOS on that FAT32 partition, I can't boot into the NTFS partition which contains XP, nor can I boot into F11.Anyone else having problems with the boot? I've been a long time Fedora user and was counting on the reliability of F11: Wondering if that Anaconda re-write had anything to do with all of these problems?
View 14 Replies
View Related
Jun 9, 2010
creating a bootable floppy from a bootable floppy image on a NON Linux machine I am trying to install dsl (damnsmallLinux) on one of my old Compaq 2000 Deskpro machine having 256RAM and 2 GB hardisk. (which I hope to increase to 8 or 10 GB ...can I use a larger disk capacity??) I have downloaded the floppy bootable image from the website using a machine a fedora OS machine that does not have a floppy drive. I have even converted the image file to an iso file. I can copy this image file or iso file to the Compaq machine but how do I use it as a bootable floppy? OR how do I create a bootable floppy disk from this image?
View 6 Replies
View Related
Oct 23, 2009
I have a cdrom (bootable) that I want to copy over to a usb stick, and have THAT boot the system (Adding other files to it before hand) I know it's easy, but how? I've already made a iso of the cdrom.
View 2 Replies
View Related
May 11, 2010
How can i copy my G4L bootable CD into a partition, so thar i can boot from it, and not use the CD anymore?The idea is based in the fact that i am so lazy ... that opening/closing the CD is getting on my nerves
View 5 Replies
View Related
Mar 23, 2011
If I dd copy a bootable usb drive to an iso will the iso be bootable?
I haven't tried it yet, but i'm going to. Heres the situation and tell me if I'm crazy.
I have several bootable CDs I use at work to do different things, so I went ahead and made a multi-boot usb stick with the isos on them and everything is golden. When i need something else, I am able to slap the ISO on the usb stick, edit the menu.lst and I'm good to go.
The problem is, for some of our equipment I have a bootable USB stick that I have to use. I tried copying the files on the bootable USB to my multi-boot usb and setup grub to boot it (which admittedly I'm no expert at), but have had no luck.
So now I'm thinking, I'll use dd to copy the bootable USB stick to an iso (using bs=2048) and then do my normal setup with an ISO and maybe it will work.
View 5 Replies
View Related
Apr 3, 2010
I have slackware on a bootable flash drive, and the pc onto which I want to install slack won't boot from a flash drive. So how do I burn a bootable set of CDs from my flash drive?
View 2 Replies
View Related
Feb 10, 2010
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
View 2 Replies
View Related
May 13, 2010
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies
View Related
