I've lost my boot manager ,can't boot from harddisk ! I've installed F11 x86_64 kde livecd on a partition aside with FC10 and windows xp, created a /boot ext3 partition + a " / " ext4 root partition and a swap partition shared with F10.I've tried to restore booting windows xp with the windoze restore cd with the "fixmbr" tool, but it did'nt fix i
View 4 RepliesI just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies View RelatedI have Fedora 14 installed on my laptop (Installed with few issues) and I'm trying to install ubuntu on my desktop. I had ubuntu 10.04 installed before on a second (250gb) hard drive (Windows 7 on the other 1TB drive) with a few issues and kinda screwed a few things up trying to upgrade to 10.10. So, I said screw it, and downloaded the live .iso for 10.10 (x64) and burned it to disk. I boot from the live CD and choose the install option to use entire 250Gb disk. I choose my options, including to download updates and install 3rd party software and let the install run its course. Everything seems to be going fine and it asks me to restart. So I say yes, the disk pops out and the screen goes dark... and then nothing happens. The computer's still on but hasn't restarted yet. I hit the del key (Which I use to enter BIOS) and the computer finally restarts. I enter BIOS and tell it to boot from the 250Gb HDD, save and exit. However, it gets stuck at the point where it (It, I assume to be the motherboard) says "Loading Operations System ..." and with a blinking cursor on the line underneath. Nothing happeneds.
I tried again just this morning using the same procedure. I'm once again stuck at the "Loading Operating System .." screen.
EDIT: After poking around a bit more, I remembered I was confronted by a GRUB menu when I booted into Windows 7 HDD. So, I selected Linux from the menu and all seems good. Does anyone know why this is? It's very odd, well at least to me. Why would GRUB be on the windows hard drive? Is this something I should be concerned about?
I am trying to install fc11 on an intel mb with pentium4 and ati graphics
the install always hangs at the point where the sw packages have been selected
and the install is checking dependencies.
I have tried the regular install
the basic video install, and text install
with the same symptoms each time
the dvd drive lite is on and the hard disk activity lite is on and the system is frozen.
have to power off.
I have fc11 installed on another system (amd) and had install issues also but that was
with the preview.
I downloaded Fedora 10 LiveCD, then stick it in to my computer. It seems to start up nicely, but then I get this error:
Loading vmlinuz0..........
Loading initrd0.img...........
.......ready.
This kernel requires the following features not present on the CPU: cmov
Unable to boot - please use a kernel appropriate for your CPU.
New install from downloaded DVD. sound played after install. Installed rhymbox, which tried to install the various nonfree packages. I didn't have the keys installed so it failed miserably. From various websites I've used yum to install nonfree packages to support mp3. I now have both movieplayer and rhymbox which have no sound. Even more strangely, rhymbox 'slider' which follows the playtime remaining, simply doesn't move? Tried remove/re-install rhymbox to no avail.
View 4 Replies View RelatedI have a Dell Optiplex 760 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
running:
I tried to upgrade to FC11 via download and DVD and in both cases the install hangs on bootstrap right after remounting the root filesystem in read/write mode.
Since it hangs in this manner, I have not been able to gather any logs...
FC11 i386 dvd iso image passes pgp verify. Burns fine and verifies fine under nero. Boots fine and verifies fine on my athlon system and installs just fine. Not one issue at all. 1374 pkgs install without issue. Take the same disc put it into my dell poweredge 2850 (dual xeon) and the disc fails to verify.
Even if I go ahead and try to install, it will boot and go through the menus. Then on package install at some point it will say one is corrupt and halts the install. Yet ubuntu 9.04 installs just fine on it. So I don't see how it could be the dvd player itself, though not 100% ruled out.
I'm planning FC11 x86_64 with a live cd , but I would like to preserve my /home partition that is in ext3 . or is there a way to do an install and keep my /home and convert it after in ext4
View 1 Replies View RelatedWas using preupgrade from FC11x64 to 12x64. Preupgrade caused alot of problems like /boot not enough diskspace. After some searching found the steps and preupgrade proceed happily but after reboot got kernel panic grrr.
Took 3 days to find another machine to download and burn the FC12x64 disk. So I booted via the FC12x64 disk and selected the 1st option to install/upgrade. I thought it is upgrade and so choose replace my existing linux system however it wiped out everything on the disk. I have some important data in my home directory. I think it is in LVM, not a partition like /dev/sda1. How can I recover them? Was using stock settings.
I installed FC11 from installation cds twice and I'm having a problem with Firefox freezing the system. The mouse cursor will move but nothing else is responsive, including mouse buttons and keyboard.I checked the media on every disc and they all check fine.I never had this problem with FC10. I tried upgrading Firefox -- with the necessary dependency upgrades too but without success.I tried to downgrade to FC10 Firefox and ran into a great big hassle with that.
View 4 Replies View RelatedI'm running into this issue after installing Fedora Core 11 off DVD. Anaconda install the first part of the installation, then after reboot it goes into run level 3 (I think, where you have to login as root) I noticed that it said xserver failed to load before it actually boots Anaconda.
Maybe I should pull a graphic's card? I have logged in as root after the base install and did a lspci, and you can see the two Nvidia Quadro FX1700's and you can tell it is an intel board with the Intel Corp 6311ESB/6321ESB PCI Express ports. Also you can navigate through the linux directories via ls \. I tried YUM to find/install the graphics drivers but it says something about metadata not being configured. I checked the IP address with ifconfig and had to manually assign an ip.
Downloaded the F10 live CD. Booted to it, got past the white, blue, and dark blue loading bar then my screen would be covered in black and white lines. No sign of the GUI except for a mouse cursor. ctrl+alt+backspace would cause the display to blink off and then come back on to the same thing. ctrl+alt+f2 would bring me to a terminal, logged in as root, but from there I couldn't do anything. startx would tell me I had x running on another screen.
hitting tab when booting the livecd and adding "xdriver=vesa" and "nomodeset" to the boot line. That works. I get to the desktop at native res with desktop effects. Killer. I tried to install; install went flawless, rebooted to my HDD and the same issue, black and white bars. When booted to my HDD, however, ctrl+alt+f2 doesn't bring me to a terminal, it causes my monitor to go into sleep mode and my computer becomes unresponsive so I can't do anything from the command line.
Here's what I'm getting at : how do I get my installed version of F10 to do the "xdriver=vesa" and "nomodeset" args that the livecd can do?
My machine is a home built machine I bought off of a friend. P4 2.4 ghz, GB RAM, 2 80GB HDDs, Radeon x1600.
If I turn off the quiet mode in the boot options, it does throw up some errors (e.g. SQASHFS), and then stops after "starting abrt daemon".
On an AMD Athelon. It worked fine of F9, but started playing up, so I'm looking at upgrading.
Is it still possible to use LiveCD to boot into rescue mode and run fsck?
I just want to run fsck on my hard disk and make sure all is well.
Does fsck provide and logs or records of what it found?
Is it possible to run fsck without LiveCD?
I am trying to install Fedora on my computer but I am getting a kernel panic at liveCD boot after boot menu. It occurs to me for F13 and F14 (all x64, F14 x86 seems to boot fine but I'm trying to host a x64 guest OS on it so I need to get the x64 version to work)
My system specs:
Dual Opteron 265
4GB RAM
Asus K8N-DL (nVidia nForce Pro 2000, BIOS 1010)
I also tried to install F14 in some other computer (which worked flawlessly) and put the HDD into the computer in question, which gave me the same kernel panic.
I've burned the installation media on several different types of media, and i'm getting an error after the 3 bars load (first screen). I've tried the verify and boot option, and it's fine. I'm trying Fedora 10 on a studio xps 1340. The error messageet isCE hpet increasing min_delta_ns to xxxxx nsec twice, thenForce XPAon: 0about 15 times, thenCE hpet increasing min_delta_ns to xxxxx nsec a few more times, this pattern alternates and the xxxxx keeps increasing, starting at something like 10000 and jumping by 50000 each time it reposts.
View 14 Replies View RelatedI cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies View RelatedI had Fedora11 (default layout) running on a separate hard drive (winXP on the other drive). After the FC drive failure I replaced the drive and did a fresh install again. This time I tried a custom layout to keep the /home on a separate partition. The installation went without a hitch, but on first boot the system hangs with "Verifying DMI Pool Data......"
XP boots fine though. Looks like grub doesn't get loaded. I can boot with the installation cd and get into recovery mode, everything seems fine on the fedora disk. Fdisk result:
Grub.conf:
System Specs:
Toshiba A135-S2276 Laptop With Vista
ATI RADEON 200M 128MB
1.78Ghx Core Duo
2GB RAM
I am trying to Install Fedora 11 from a live install CD. I know it works because I tried it on another system. After the little Balloon that shows its loading completes the screen scrambles, later a mouse pointer appears then freezes shortly after. When I remove Quiet from Kernel Params. Lots of text then Samething.. Scrambled Screen the Freeze. I have tried adding the Following Parameters to the Kernel (nomodeset, xdriver=vesa, acpi=noirq, noapic). This sounds like a common problem with ATI based graphics and all answers seem to point the "nomodeset" and the "xdriver=vesa" but they dont seem to help.
I've been trying to install fedora 12 on my laptop, however, I've been running into kernel panics on both the live cd and the install dvd. I'm using an HP HDX16 with an Intel Core Two Duo T9400 @ 2.53ghz, and a Nvidia Geforce 9600M GT. Dunno if any other hardware might be involved. Here's the text I get on my screen:
Code:
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
DMAR; Host address width 36
DMAR: DRHD base: 0x0000000000000000 flags: 0x1
IOMMU 0: ver 0:6 cap f00021a4f000e2c3 ecap f000ff54f000ff53
DMAR:RMRR base: 0x89dc9ff649ff77fd end: 0xf4ffdefe05fcfbffe
DMAR: No ATSR found
DRHD: handling fault status reg f0002198
Kernel panic - not syncing: DMAR hardware is malfunctioning
Pid: 1, comm: swapper Tainted: G W 2.6.31.5-127.fc12.i686 #1
Call Trace:
[<c0764636>] ? printk_0x14/0x16
[<c0764580>] panic+ox3e/0xe0
[<c05b4ce3>] __dmar_enable_qi+0xbc/0xd3
[<c05b52d1>] dmar_enable_qi+0xe9/0xf3
[<c09aaecc>] init_dmars+0x1c7/0x5fb
[<c08fb6b4>] ? pci_iommu_init+0x0/0x11
[<c09ab50e>] intel_iommu_init+0x20e/0x2b6
[<c098f6bc>] pci_iommu_init+0x8/0x11
[<c0401143>] do_one_initcall+0x51/0x13f
[<c0989372>] kernel_init+0x19c/0x1ed
[<c09891d6>] ? kernel_init+0x0/0x1ed
[<c04041a7>] kernel_thread_helper+0x7/0x10
I have finally decided to bite the bullet and upgrade my current Linux system from Fedora Core 2 to Fedora 15. When checking the download page and from reading another thread there is apparently no isos' available for an set of install CDs. An iso is only available for DVD. Since my machine does not have a DVD drive that is obviously not an option. In the past I have only installed from a set CDs and I'm not sure which install method is the best to use. I do have a DSL internet connection and will probably need to increase my partitions sizes. Which install method do you recommend and why?
View 11 Replies View RelatedI've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
I want to view movies and livestream on the Internet and I tried many times installing the flash player for my fedora liveCD but still its not working. There always been an error. I been using all the options and installation instruction posted on the adobe site but still I can't find my way in.
View 3 Replies View RelatedI have try to install fedora 11 with windows XP dual boot, but when fedora 11 is install, it will compeletly remove the already installed windows XP, while fedora 8, it works nice with windows XP, and is good dual boot OS at the same time.if any thing is new in fedora 11 or 12 with respect to dual booting,
View 2 Replies View RelatedI was on version 2.6.29.6-217.2.3.fc11.x86_64 and it asked me to update so I did. When I restarted I chose this version to install and after a brief loading screen it goes to a black screen with a cursor prompt and pretty much stays there. So I go back to 2.6.29.6-217.2.3.fc11.x86_64 which boots up just fine. But after a while I get some updates that won't install because it says that Packages are not compatible:Install - Linux Kernal 2.6.30.5-43.fc11(x86_64)
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.19-170.2.35.fc10.x86_64 is needed by kmod-nvidia-2.6.27.19-170.2.35.fc10.x86_64-180.29-1.fc10.1.x86_64
[code]....
I'm trying to install (L)ubuntu on an old AMD 1.66GHz based HP laptop, to dual boot with Windows XP. However I'm running into an issue that I haven't come across on any other machine before where after selecting "Install Lubuntu" from the main boot menu, it moves to the scrolling dots splash/loading screen and after ~30 sec or a minute it freezes. There is no error, it doesn't reboot or eject the disk even after several hours of sitting on that splash screen, with the dots frozen, no CD activity, and no HDD activity. I get the same result if I try to boot it as a LiveCD as well.
Can someone help diagnose whats going on? Is it possible changing some boot options will allow it to install? I'm not quite sure where to go with this one.
Running kernel-PAE-2.6.29.6-217.2.7.fc11.i686
Boot hangs on 'starting atd'
Select 217.2.3 and it boots OK.
I have installed last updates about 3 days ago. After this Fedora kernel 2.6.30.9-99.fc11.x86_64 does not start.booting it the last message I see"ADDRCONF(NETDEV_UP):wlan0: link is not ready" then it stops. I have to boot with a previous kernel version 2.6.30.9-96.fc11.x86_64.
View 2 Replies View RelatedI'm planing to upgrade from FC11 to FC14 using a preupgrade. I've read about some ways to overcome the problem of my /boot partition being only 200MB in size while the newer versions require 500MB. The option of "filling the free space on the boot partition to be less than 100MB to cause preupgrade to download the loader" appeals to me. But what I don't understand is: is the 500MB requirement of the new versions is transient during the install or a permanent requirement? If I do this trick of first filling up the free space on /boot then freeing it up before the reboot, what will be the permanent disk space requirement of FC14?
Are there any safe (and prefarably simple) ways to increase the size of the /boot partition after decreasing the size of other partition? Here is the output of "df" relevant to the /dev/sda disk:
Code: