I am using Dell Notebook model Inspiron 1420. I run Ubuntu 9.04. I've tried but failed to install SPSS Student Version 16 via Wine. There is a message saying the installer is unable to run in graphical mode. Try to running installer with the -console or -silent flag. What is the silent flag?
View 4 RepliesI'm running a game called EV Nova (which runs perfectly well in WINE). I'm trying to set up a Menu item for it, but the Terminal command fails.
What works:
Right-clicking EV Nova.exe and selecting "Run with Wine Windows Program Loader"
What doesn't:
wine /home/user/.wine/drive_c/Program Files/nova/EV Nova.exe
wine "/home/user/.wine/drive_c/Program Files/nova/EV Nova.exe"
wine "C:\Program Files\nova\EV Nova.exe"
...or pretty much any other Terminal command.
No Boot started w/auto check of drives and it failed on my Virtual C: drive. I know,... but I edited /etc/fstab and now I have nothing available to get a command line. I have grub2 and don't know how or can't get to a boot menu either. Is this a reinstall?
View 9 Replies View RelatedI am trying to install spss 16 on an hp. I have activated the license and everything but when I run ./spss on the spss bin directory (this is the executable the install instrucyions tell me I should use) I get the following error after a little intro screen:
Code:
testu@Schwarzschild:~/SPSSIncb/SPSS16/bin$ sh ./spss
#
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x20656770, pid=2334, tid=2338302832
#
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
[Code]...
Aborted As you can see, I created an user to test the install (also this user has compiz completely disabled) and installed spss on his home directory.
I just installed wine 1.1.2.3 and I tried to run pocket tanks 1.3, but it fails. I think it has to do with the offscreenrenderingmode and needs this [HKEY_CURRENT_USERSoftwareWineDirect3D] "OffscreenRenderingMode"="backbuffer" However, that winedirect3d does not exist. The only things that do are fonts, drivers and occasionaly X11 and temperorary system settings Where did it go? What, if anything, Should I do? I could be completely wrong. Anyone have pocket tanks running successfully?
Fedora 11
AMD64 x86_64
Kernel 2.6.29.6-217.2.3
I've just downloaded ubuntu server 10.04.1 and put it on my usb flashdisk, the installation works fine until the point, where it tries to install grub.The thing is, that the installer is trying to write the grub to /dev/sda (which is my usb flashdisk) and not the raid itself.I'm using a fakeraid intel ich9r, which maps the newly created storage to /dev/mapper/isw_ecdhgaacgh_Volume0.Why doesn't install use that instead? It sees it, partitions it, even copies files to.
View 5 Replies View RelatedFirefox 3.1 beta 3 won't load. When I open the application, the little bouncy icon bounces, and the task manager shows "Firefox Web Browser", but this only stays this way for about 15 seconds then just goes away. No error or anything.
I've had this identical problem when I try to open certain programs with Wine too. Is there some place I can find a detailed error report on these failures?
when I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
View 1 Replies View RelatedMy first upgrade attempt to 9.10 ruined my install - there was no return and as 9.10 would not install either, I reinstalled 9.04 and everything was as expected.I decided to wait for 10.04 hoping the issue had been solved - unluckily it has NOT. Neither Live CD 9.10 nor 10.04 work. New Mint does not work either - to closely related to Ubuntu, but Suse live CD does. Played around with findings from different threads - like taking out "quiet splash --" and adding modprob parameter to no avail Prime suspect is HD and HD controller (ATA/PATA) - but I could not nail it.
View 3 Replies View RelatedI recently got a shiny new msi notebook and I decided I wanted to dual-boot Linux on it (with Windows 7 Home Premium 64-bit). I started with Ubuntu, when that failed (the GUI wouldn't install properly) I tried Mint. It worked fine, but for some reason, I hate Mint. I deleted the Mint partitions and attempted to claim back the free space in a new partition for Windows 7. For some unbeknownst reason, it failed. Since I didn't desparately need the hard drive space, I said "screw it" and went about my day.
After seeing a friend using Fedora, I figured "why not?" So I downloaded F14 and burned it to a disc and booted it. All went well so I tried installing it. The install process went normal until I reached this screen: I press "Next", and I get this: (Full text here) I start to think that anaconda has something to do with my hard drive partitions, so I open Logical Volume Manager.
Partition 1 is a recovery partition (12 GB).
Partition 2, I have no idea, but it's only .1 GB.
Partition 3 is the Windows 7 partition (172.29 GB).
Partition 4 is 113.20 GB.
Unpartitioned space is 113.20 GB.
I know this can't be right, because my hard drive is only 320 GB (and those GB aren't even "real" GB) and the partitions add up to 410.79 GB. I'm thinking that Partition 4 and Unpartitioned space are the same thing, and the existence of the Partition 4 record is the aftermath of the failure to reclaim the disk space for Windows. So how do I go about fixing this (getting rid of Partition 4 or finding a work-around)?
Searching for one week at the forum, sorry if i missed any posts about my issue,
My specs:
Microprocessor1.4 GHz Intel� Celeron� M Processor 360
Microprocessor Cache1MB L2 Cache, 400MHz FSB
Memory256MB 400MHz DDR2 System Memory (1 Dimm)
Video GraphicsIntel� Extreme Graphics 2 (shared)
Video Memory256mb: up to 64mb shared
Hard Drive40GB (4200RPM) Hard Drive
[Code]...
Today i used the mini CD command-line install, got the system running at the terminal, but installing xorg or gnome and rebooting results again in fail. Tried to edit xorg.conf through nano, after sudo apt-get install but before reboot, but was fail again (couldn't open the file). I dont know exactly if its the gnome or the X the issue, because i tried at the same notebook the ubuntu 8.04, the wallpaper pops up but it freezes after, i cannot use the X. Both cd's are checksum valid originals from canonical
is there any ways to install gnome and x in the terminal, edit the xorg.conf with anything that solve the problem and reboot? update 23:11PM: I found it, its a issue with old intel graphic cards. i915.modeset=0 xforcevesa in the boot parameters and i could use the installer in the lucid live cd. but now i need to edit the grub to always boot with this parameter.
System Specs:
Toshiba A135-S2276 Laptop With Vista
ATI RADEON 200M 128MB
1.78Ghx Core Duo
2GB RAM
I am trying to Install Fedora 11 from a live install CD. I know it works because I tried it on another system. After the little Balloon that shows its loading completes the screen scrambles, later a mouse pointer appears then freezes shortly after. When I remove Quiet from Kernel Params. Lots of text then Samething.. Scrambled Screen the Freeze. I have tried adding the Following Parameters to the Kernel (nomodeset, xdriver=vesa, acpi=noirq, noapic). This sounds like a common problem with ATI based graphics and all answers seem to point the "nomodeset" and the "xdriver=vesa" but they dont seem to help.
I try to install Fedora 12 from CD.
The CD is booted fine, but when i press on "Install to Hard Drive" icon, its not starting installation.
in the /var/log/messages i can see the following: localhost dbus" Can't send audit system: USER_AVC avc: received setenforce notice (enforcing=1).....
I use Dell latitude 110L.
Clean install.
Appeared to work fine.
Restart after install OK.
Ran Update Manager:
It started work on some 300-odd updates, But froze when "Applying Changes" to the following package:
libc6-dev. It was "Preparing to configure" libc6-dev, But couldn't get any further. The Update Manager window said it was at this point: "Security Updates - User-space parcer utility for AppArmor" Total freeze-up.
Forced restart.
Got to password screen OK.
Then to blank screen:
[code].....
This is all most unfortunate. The computer belongs to someone I know. They were getting fed up with their other operating system. I suggested Ubuntu. I've got their laptop on a promise to set them up with Ubuntu. I don't have long. They need it quickly. I may have no choice but to give it back to them with their old operating system on it. Won't be any skin off their nose.
Toshiba Equium A100-549 Model PSAA4E-00100MAV
I am installing from the scratch a 11.3 on a PC on which previously 11.1 did run flawlessly. (Athlon 3700 with 3GB ram and Asrock socket 939 mainboard. Graphics is Nvidia. The installation comes every time up to 90% when it arrives at "font initialization). No error message is displayed. The little "cursor wheel" is still turning but else, there is no activity.
DVD from an sha1 checked and MD5 doublechecked download was burned with lowest speed in K3b and verified by the same program post burn, with full success of every verification.
Tried to change DVD reader but does not change the result. Runs speedy up to that step.
I've bougt a new pc (i5-2050k, Nvidia GeForce 560Ti) and wanted to install Linux beside Windows.But each Linux-distribution (exept the old ones from Mandriva) fails installing/starting als livecd/checking for installation errors/..... while initiating udev.Is there any known bugfix for this problem? Remind, there is just Windows, so don't give me any shellcode to execute
View 5 Replies View RelatedI tried out many distros on my desktop before experimenting with my oshiba Satellite A665 laptop with integrated intel graphics. Everything worked out as normal until I was testing Ubuntu on a live cd, I clicked install and it sent me back to the login screen before I had made an account. So I then chose to restart and it started glitching so I had to manually power off. Ever since then whichever distros I try to install, they face numerous errors. On Ubuntu and Peppermint they freeze on the 5 dots installation part and Linux Mint just has a permanent black screen. Even the current Peppermint OS (only distro i have)hangs on the 5 dots when trying to boot onto the computer. This has resulted me in a computer that cant do anything, i've tried the noquiet and nosplash options but they don't seem to work. I was thinking of installing Windows and maybe erasing the disk by installing another distro later?
View 8 Replies View RelatedI am Brand new to linux and i was trying to install wine when I got This lovely thing on my screen : The Pic is in the attachment. How do I hit ok.
View 2 Replies View RelatedWhen attempting to install FC12 x86_64 on a Dell Optiplex 760, my USB devices stop working after initial boot. I see anaconda, but am unable to change anything since my keyboard, mouse and any other USB devices are not powering up after kernel boot.
View 13 Replies View RelatedCode:
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[Code].....
After installing I can see the Wine drop-down menu under the Applications, but every time I install something, updates etc. I can see this same error. How can this be fixed?
I did a fresh install of 10.04 ubuntu it seems to run fine. but I can't install MS software in wine it tells me that its blocked. This the message that i get:The file '/home/carl/Downloads/FW_V32_5_10_00_5054v2.exe' is not marked as executable. If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details, read about the executable bit.I installed this same file in 9.10 with no problems and I tried another MS program that I installed in 9.10 using wine no problems.
View 3 Replies View Relatedi want to install wine on rhel 5.plz send me wine installtion command.
View 1 Replies View RelatedLot of questions about WINE... When I'm done I'm going to make a HOWTO so that others can do what I did It's hard work, but I'm nearly done.The last problem I'm having is the WINE menu on GNOME won't show up after a install of WINE from a .deb package (it usually does). This was after I compiled WINE from source and removed it with "make uninstall" and "rm -rf /.wine".So now I installed the WINE from a deb package and the Wine menu entry is not showing up.I've tried re-installing Wine and rebooting my PC but nothing seems to work.
View 3 Replies View Relatedim trying to install wine1.3 and i need to upgrade libc6-i386 so i let apt-get try to do it, but it hangs at unpacking the deb, normally it has no problem no error occurs just sits there like its a huge deb but its only 3mbs. ive tryed using synaptic and doing the following.
sudo rm /var/lib/dpkg/lock
sudo dpkg --configure -a
sudo rm /var/cache/apt/archives/lock
sudo apt-get check
sudo apt-get clean
[Code]..
I am fairly new to using Ubuntu 10.10 or any other versions of Ubuntu. I recently downloaded Microsoft Office 2010 and opened it with Wine (read it was the best and easiest to use) after a few seconds I get an error message asking me to install msxml 6.10.1129.0, So I did some further research and found a bunch of links for download but from experience I did not attempt any as I know my PC can get infected. How to get Office on my PC.
View 2 Replies View RelatedI have had webmin running previously but i just recently installed Unbuntu server and i am now trying to install webmin. after typing this to install webmin sudo apt-get install webmin it started doing its thing and then it halts.
Giving me the following message: "Package webmin is not available, but is referred to by another package. this may mean that the package is missing, had been obsoleted , or is only available from another source."
The first thing i did after installing webmin was edit the sources.list
Then i tpyed sudo nano sources.list I uncommented everything with "deb" in front of it
I also uncommented
deb cdrom:
I then typed this sudo wget [url]
After getting that i typed this apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl
Then i tryed to install it and got that error.
I also tryed install it using this tutorial [url]
When i got to the part when i need to type
sudo apt-get install update this is what happened
I am trying to install wine on a Karmic box, but apt-get is trying to upgrade libc6 at the same time. _I know better than to touch the runtime C library. When I boot the same computer with a live session of Karmic, apt-get installs wine flawlessly.What is going on here? _Why is apt-get trying to do this
Code:
root@machine:~# apt-get install wine
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
cabextract cpp-4.4 gcc-4.4 gcc-4.4-base ia32-libs lib32asound2 lib32bz2-1.0 lib32gcc1 lib32ncurses5 lib32nss-mdns lib32stdc++6
[Code]...
I just finishing burning ubuntu on my laptop and was getting ready to partition my disk to allow space for ubuntu. I restarted my computer and when it was restarting ubuntu logo came up (as it booted from the disc). I was not wanting to install it at this moment so i was waiting for it to load then cancel it(just like a windows installation).It then froze and became pixelated with green and white colours.I thought it was nothing maybe just an error in teh disc. I waited 5-10 minutes then held the power button to shut it off. I then went to settings in the bios and changed it to boot from hdd first. After restart, windows began to load for like 3 seconds then blue screen. I dont know what went wrong or why this is happening.During installation of Ubuntu on my second try I keep getting:sudo: can't read /etc /sudoers: Input/Output errorsudo: no valid sudoers sources found, quittingWhat are the odds of me still having my windows 7 data?and could Hiren's boot cd help?
View 5 Replies View RelatedWhen i boot its all ok i press enter for instal ubuntu and than the normal screen When it finishes loading i get a random mashup of my windows desktop.
View 1 Replies View RelatedSo ... right now I'm having an issue after I installed ATI Catalyst 10.8 for my GPU HD 5770.Every time I try to boot, it sends me to init3 (I mean text screen). But when I check and try to switch to init5, it tells me that I'm on init5 already.And I'm still stuck on the text screen. However, safemode is still working (yeah I'm on it right now - -").
I installed ATI driver by using this instuction --- openSUSE Lizards � ATI HD57xxx fglrx drivers under 11.3