I upgraded to 10.04 and cannot boot my system, even in recovery mode. No errors are shown, only some random color noise at the top of screen. I tried the 10.04 livecd and it doesnt boot eiter, it stops in busybox prompt with error: "Could not mount /dev/loop1 on /cow" or something like that. Before 9.10 was functioning perfectly.
My computer is Asus 1201N: [url]
liveCD hangs on the ubuntu splash screen. this is the second time grub has hosed this system (last time was 9.10 upgrade).
View 9 Replies View RelatedSystem Specs:
Toshiba A135-S2276 Laptop With Vista
ATI RADEON 200M 128MB
1.78Ghx Core Duo
2GB RAM
I am trying to Install Fedora 11 from a live install CD. I know it works because I tried it on another system. After the little Balloon that shows its loading completes the screen scrambles, later a mouse pointer appears then freezes shortly after. When I remove Quiet from Kernel Params. Lots of text then Samething.. Scrambled Screen the Freeze. I have tried adding the Following Parameters to the Kernel (nomodeset, xdriver=vesa, acpi=noirq, noapic). This sounds like a common problem with ATI based graphics and all answers seem to point the "nomodeset" and the "xdriver=vesa" but they dont seem to help.
Ubuntu Lucid Lynx 64bit, HP ZV6000
I've boon doing a lot of reading on booting problems in 10.04 and it seems as though there are a lot of booting issues after the upgrade or, in my case, out of the blue. I've only been using Ubuntu for about 6 months now, dual-booting my WinXP box, and for the most part haven't had any issues. I upgraded to 10.04 via the update manager (or whatever it was that said: there's a new version of Ubuntu out there, please update) sometime in May and never had a problem (although I did choose a wrong setting for the dual boot but that just meant I couldn't get into WinXP).
Out of the blue one day, after being on the laptop for a few hours I decided to shut down and go outside. I did the same normal shutdown I always do and shut the computer down. I came back to it a couple of hours later and it wouldn't boot. The HP splash screen pops up (as normal) giving me the opportunity to go into the BIOS if needed and then the GRUB 1.98 loader shows the available versions: Ubuntu kernel, ubuntu kernel and Win partition. If I choose either of the two Ubuntu kernel's my screen goes blank and I get a flashing curser in the top left corner. And that's it. I've let it sit for an hour and nothing.
I tried to boot from my LiveCD (9.10) but the computer will not boot from the LiveCD. I took out the HDD and slid it into a USB connector and plugged it into another computer and only the WinXP partition shows. I can't even look into the non-OS partition I created specifically for circumstances like these. I tried the "GRUB> find /boot/grub/grub.conf" command from the GRUB menu and nothing. It comes back with a "find is not a valid command" notice. I have some music and videos on there I'd really rather not lose. Unfortunately, the laptop is too old to boot from a USB (BIOS isn't being updated anymore) and I can't think of any other options. As far as I know, my only other option is to format the drive and start over.
I have a Netgear USB wireless NIC and neither Ubuntu or Lubuntu Live images can see it. I have tried copying wlan from another machine and installing the packages, but that doesn't work.
I recently seen a thread showing what the file is that is missing in the Lucid live images that was present on the Karmic and earlier images, but I can't find it nor remember what the file was called.
I've been running Lucid since it dropped. Decided to upgrade my NVIDIA 6600gt graphics card to the newest driver I found at the website. Installation went flawless. But after reboot, I got this:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) May 05 12:24:17 NVIDIA(0): Failed to initialize the NVIDIA
kernel module. Please see the
(EE) May 05 12:24:17 NVIDiA(0): system's kernel log for
[Code]....
Searching for one week at the forum, sorry if i missed any posts about my issue,
My specs:
Microprocessor1.4 GHz Intel� Celeron� M Processor 360
Microprocessor Cache1MB L2 Cache, 400MHz FSB
Memory256MB 400MHz DDR2 System Memory (1 Dimm)
Video GraphicsIntel� Extreme Graphics 2 (shared)
Video Memory256mb: up to 64mb shared
Hard Drive40GB (4200RPM) Hard Drive
[Code]...
Today i used the mini CD command-line install, got the system running at the terminal, but installing xorg or gnome and rebooting results again in fail. Tried to edit xorg.conf through nano, after sudo apt-get install but before reboot, but was fail again (couldn't open the file). I dont know exactly if its the gnome or the X the issue, because i tried at the same notebook the ubuntu 8.04, the wallpaper pops up but it freezes after, i cannot use the X. Both cd's are checksum valid originals from canonical
is there any ways to install gnome and x in the terminal, edit the xorg.conf with anything that solve the problem and reboot? update 23:11PM: I found it, its a issue with old intel graphic cards. i915.modeset=0 xforcevesa in the boot parameters and i could use the installer in the lucid live cd. but now i need to edit the grub to always boot with this parameter.
I have multiple computers set up in my home (self education on networking) with one used as the main machine, and the others set up as a variety of server types. The main machine is running Lucid, as gui based os. The others are all running the server version. NO Domain controller is installed, no DNS server is installed.
ALL of the server machines boot to a login prompt, allow user name and password entry, and then will fail to login with a timeout error. After anywhere from 8-15 tries, the login will eventually succeed. Error also occurs when logging in via ssh.
How did it work out? What model machine are you using?
Just wanted to get some idea of stability/functionality.
I upgraded my desktop from 9.10 to 10.04 and I have no sound.
When I boot from the 10.04 livecd, sound works fine.
gnome-volume-control does not get loaded into the taskbar, when I run it from the console there is nothing listed under hardware.
I also tried creating a fresh new user account, no sound on that either but gnome-volume-control does get loaded into taskbar but still nothing under hardware.
aplay -l does list sound devices ...
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code].....
ubuntu@ubuntu:~$ sudo aptitude safe-upgrade
The following partially installed packages will be configured:
linux-image-2.6.35-22-generic
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[Code].....
i'm running a fresh install of 10.10 with a casper-rw partition off a usb drive.
I tried to do a upgrade-manager -p ( or maybe -d , I forget ) and at the end it said the upgraded failed and my os was in a broke state. What can I check or do to complete the upgrade?
View 1 Replies View RelatedFail the upgrading...
Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade: The package 'update-manager-kde' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
Yesterday, while upgrading from Ubuntu 10.04 to 11.04, the computer crashed. For this reason, when I reboot, Ubuntu doesn't recognize any longer the root folder and so on... and halts execution in a blank screen (well before the login screen).I'm currently running LiveCD and I can see the Filesystem with the root folder, the bin folder, home folder and so on....My question is How can I access the files I had in my desktop from LiveCD? I know the user and password so how can I access it?
View 4 Replies View RelatedI am using the Ubuntu 7.10 Livecd with some modifications I did, and I wanted to update the base-system to the most recent release of Ubuntu. Once I have chrooted into the custom ISO's root filesystem do I use:
Code:
apt-get update
apt-get upgrade
apt-get dist-upgrade
or
Code:
aptitude update
aptitude upgrade
or neither?
After upgrading to 10.4, Eclipse started showing the the following error:
Failed to load JavaHL Library.
These are the errors that were encountered:
no libsvnjavahl-1 in java.library.path
no svnjavahl-1 in java.library.path
no svnjavahl in java.library.path
java.library.path = /usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/i386/client:/usr/lib/jvm/java-6-sun-1.6.0.20/jre/lib/i386:/usr/lib/xulrunner-1.9.2.3:/usr/lib/xulrunner-1.9.2.3:/usr/java/packages/lib/i386:/lib:/usr/lib
Synaptic shows libsvn-java as installed.
I have a laptop running Ubuntu 10.04 and also two dual boot desktop machines, both running Windows XP and Ubuntu. I have upgraded one of the desktops to Ubuntu 10.04 and since doing so Thunderbird will not run on the laptop or the desktop. On clicking the launcher there are signs of activity for a few seconds and then they stop and Thunderbird fails to open. Also there is no longer any sound on the desktop that I have upgraded. I am reluctant now to upgrade the remaining desktop in case I have the same problems
how to get Thunderbird running again, please. I have already spent a week unsuccessfully trying to get the sound working and have abandoned it, but I would like Thunderbird to start running again.
I recently upgraded to 10.04 and now netbeans is not working. It worked fine the first restart after i upgraded so i thought all was good. This morning i ran it and it said something about not being able to load some modules. Since then, i've tried uninstalling it, re-installing it, and numerous restarts, all to no avail. I'm gonna try downloading the package from their website and running it from a separate install and see if that helps, but after that, I'm out of ideas.
When i run it either from the terminal or by clicking on it, it shows the loading screen, then the loading screen dissapears, then nothing else happens. In the terminal, it waits about ten seconds after the screen dissapears and the program seems to exit, since the terminal begins accepting commands once again.
I was a little worried about doing an upgrade, via Update Manager, from 10.10 to 11.04.
I was right to be worried.
Boot hangs and booting in verbose mode, grub does come up, but going into the main latest kernel version shows;
VFS: Cannot open root device "sda1" or unknown block.
Please append a correct "root=" boot option; here are the available partitions
0b00 1648575 sr0 driver sr
May have missed some of the text as wrote it down.
sda1 was my original and only partition.
Have used my 10.10 live cd and file structure and files are all there,
Took the opportunity to shrink the single main partion and create primary partitions for /home and another for all the junk I accumulate. sda1 will still be my boot partition.
In the process of making a 11.04 boot CD.
I have problem when I try to upgrade my Ubuntu 10.10 to 11.04 using Internet the upgrade start then this Error window appear.
The error is :
I'm running some tests with RPM's.
In what case an RPM upgrade will fail (failed dependencies error message)?
For example, I have mysql 5.1.33 installed.
If I run code...
The other evening I was in the lengthy process of upgrading from Ubuntu 9.10 to version 10.04. It had downloaded all the packages and was in the process of upgrading when a thunderstorm blew in. The power failed momentarily. The system crashed and the installation did not complete.
The system is dual boot to Windows XP. From GRUB when I try to boot Ubuntu the display goes dark, after a few seconds of the white Ubuntu logo. If I hit ENTER I get a flashing Cursor. I can boot to System Restore and get the Recovery Menu. I don't know if there is something I can do from there to repair/finish my upgrade, or even revert to version 9, when I could restart the upgrade.
Can I burn a Live CD for version 10.04 and finish the upgrade? This would salvage the settings, printer drivers, and other programs that I have installed. If I have to make a brand new installation I have to rebuild all of the things I spent many hours getting setup.
I need to determine which package is causing every upgrade installation or removal of software to fail in Ubuntu 10.04 I have had a problem since allowing some non-supported upgrades (not certain what they were for) in 9.10 (FAIL!) I hoped that upgrade to 10.04 would resolve the issue (I know FAIL again!). I am guessing I can;
a) Remove the offending package
b) Repair the missing/damaged 10.04 files
c) replace the 10.04 OS
I am running a dual boot one drive system with XP and Ubuntu each in their own partition and a 3rd partition where data resides
Yesterday I attempt to use update-manager to do a distribution update. all was going good. i went to the kitchen to get a coffee and returned to a black screen with no cursor. the install couldnot have finished as it was still downloading updates i believe.
on reboot gnome did not respond so my last resort was to use kde for the time being. by running update-manager through kde I successfully updated to ubuntu 10.10. After completion of the update i restarted and gnome still had a non respinsive black screen on login.
Kde is still working fine.
Or at least how can I completely reinstall gnome.
After upgrading my ubuntu server from 8.04 to 10.04 and then to 10.10, grub failed to load and showed a: L 99 99 99 99 99 99 99 99 ....
I restarted using a liveCD, mounted my boot partition as /boot and then "grub-install /dev/sdb" (sda is the usb drive now) so I have access to grub console, but I don't know how to recover my boot menu.
I also use LVM, but I don't know if this is relevant.
I wanted to upgrade qbittorrent to the newest version. So I went to the official website and followed the steps of typing some commands in the terminal. However, it said missing libtorrent-rasterbar5. I went to Synaptic and checked, showing "libtorrent-rasterbar6". Does this mean my version of libtorrent-rasterbar is too new?
And I've removed something regarding qbittorrent because I wanted to install rasterbar5. I searched for rasterbar5 in the Net and downloaded it. It connected to the Ubuntu Software Centre automatically but it showed unable to install.
So I thought I failed to upgrade qbittorrent. I just wanted to install the original version (v2.4.0). I did it like the first time I downloaded qbittorrent. Open the Ubuntu Software Centre and search for it and press "install". It failed! Because a type of repositories named "qbittorrent" showing conflict.
I've dealt with a similar problem regarding GIMP successfully before. But I can't remember.
GRUB2 / RAID 10.10 to 11.04 Upgrade Fail.....
View 9 Replies View RelatedI was told that this command would upgrade from 12 to 13, while avoiding the boot space problem.
Everything seemed to go well, - all 1691 rpms downloaded to: /var/cache/yum/x86_64/13/fedora/packages/zip-3.0-1.fc13.x86_64.rpm, and then halted with the following message:
I'm not exactly a noobe, but this leaves me clueless. Can I salvage the upgrade?
I'm using Fedora 12 and today i was trying to upgrade it on F14 ...I download DVD from fedora site burn it on disc and start Upgrade...On start i get error that findutils is corrupted and i need to abort instalation... I think ok maybe disc is not good burned.. i Burn one more disc i test it its ok ... buti get same problem...Ok i try "Preupgrade" software.... he download all i reboot system, upgrade is start ...and... same problem finutils is coruppted... So now i cant upgrade F12 to F14 version...Icons are changed, for system version is F14... some data is changed to F14 some is still F12 + i lost Audio card so i don have sound :S
What can make me problem or how to solve?
In upgrade.log in /root/ i have one line Upgrading findutils-4.5.9-2.fc14.x86_64
I have an i5 sandy bridge PC with a gigabyte H67M mobo. I have been running maverick amd64 till yesterday. On maverick graphic acceleration didn't work so I decided to upgrade. After upgrade my computer hangs during bootup (with ubuntu logo on screen). I cannot see messages on screen, wasn't ESC key for that? Live CD seems to boot but also hangs computer after loading purple login wallpaper before login dialog is shown. To me it seems a graphic card regression issue since intel mobo graphic card wasn't working fine on maverick too. Also tried to manage with fail-safe graphic mode but this also hangs computer. Is there any log where I can see errors during last bootup from maverick live-cd?
View 9 Replies View Related