Fedora Installation :: FC11 Over With The Same Packages As In FC10

Jun 9, 2009

I'd like to try a clean install instead of an upgrade from FC10 to FC11. What is a good way of getting the list of all packages that were installed through yum, and how do I feed that list to yum on a newly installed FC11?

View 7 Replies


ADVERTISEMENT

Fedora Installation :: Yum Not Working After Upgrade From FC10 To FC11

Jun 22, 2009

I've been running FC10 with all updates and had downloaded the FC11 DVD. Yesterday I upgraded to FC 11 using the DVD and it appeared that everything went fine. However when I tried to do ayum updateI got the following error. There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:

No module named yum

install a package which provides this module, or verify that the module is installed correctly.

It's possible that the above module doesn't match the current version of Python, which is:

2.6 (r26:66714, Mar 17 2009, 11:44:14)
[GCC 4.4.0 20090313 (Red Hat 4.4.0-0.26)]

go to the yum faq at: [URL] I'm not sure what to do next. I also noticed that all my previously configured repositories are lost.

View 3 Replies View Related

Fedora Installation :: Upgraded To FC11 From FC10 / System Freezes / Hangs

Jun 24, 2009

I upgraded from FC10 to FC11 yesterday.I had no problems using FC11 after I looked into the bootloader (not intuitive - Ha!).Tried to boot up this morning; and things seemed to work well until I tried to call up Firefox (added a few themes yesterday).The window pops open; but the computer freezes on the spot with an alarm (generic "beep", w/o the finishing "p").Tried it with Epiphany; and I get the same results with the exception of actually getting to the Home Page.Yum works for the most part - I reinstalled Firefox (no effect); but couldn't reinstall epiphany (keeps saying "there is no such package - did you mean 'epiphany'". No typos on my part - go figure). Doing Software/Package Updates (via System Menu) freezes the box as well.Did it with the system monitor on. It doesn't appear to be related to CPU Usage.

Had a FC10 liveUSB and used it for awhile (e.g. to check out the forums). After giving my ISP some grief about downloading speed, immediately received a note from their Abuse Department, saying that my machine had been infected with a virus and had been sending spam emails (post upgrade to FC11).

View 14 Replies View Related

Fedora Installation :: Force The Upgrade FC10 - FC11 With Online Download?

Aug 2, 2009

How can I force the upgrade FC10 -> FC11 with online download? Somewhere in Software Update settings?

View 2 Replies View Related

Fedora Installation :: Can't Install FC10 Or FC11 For Desktop With Intel GMA X4500HD Graphics - Screen Goes Black

Jul 20, 2009

I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.

View 1 Replies View Related

Fedora :: After Upd FC10 To FC11 Yum Not Working?

Oct 12, 2009

I recently update FC10 to FC11 and Yum has stopped working. Also, "Add/Remove Software" has no packages listed. And, I have no Software repositories listed. When I try to run Yum I get the following:

There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:

[Code]...

View 1 Replies View Related

Fedora :: Does FC11's KDE 4.2 Replace The FC10 KDE Taskbar

Jun 15, 2009

Once of the biggest issues I had with FC10's KDE desktop was its taskbar widget and how it worked. It did not group tasks, didn't stack vertically, etc. etc. I understand this was due to KDE 4.1 which was a or is considered a "broken" KDE release? I've read that many ppl say KDE 4.2 is much better in FC11. Many FC11 reviewers state they like its KDE version better than 4.1 shipped with FC10.

However, has the KDE taskbar widget specifically been replaced or upgraded? Anyway, I'm considering an upgrade, and I'm willing to do it JUST to get another taskbar in KDE... if the 4.2 one is an improvement. Fondest wish is for it to be exactly like the KDE 3.5 taskbar widget from FC6!

View 2 Replies View Related

Fedora Servers :: FC11 Cannot Start BIND After Upgrade From FC10

Jul 8, 2009

I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.

Here's what I see:

Code:

[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]

So, no error message. Logs read as follows:

Code:

Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'

[code]....

View 4 Replies View Related

Red Hat / Fedora :: Revert Back To Fc10 Or Force Install Of Fc11?

May 15, 2010

After trying to do a upgrade to fc11 from fc10 it seems i am stuck between them. the grub loader only shows 1 fc11 kernel, but when i try yum update all the updates are fc10, Some libs are so.8 and some are so.7 namely libssl.so.8 and the missing deps are libssl.so.7.

is there a way to revert back to fc10 or force install of fc11.

compaq evo n400c

no floppy no cdrom can get usb flash to work.

View 4 Replies View Related

Fedora Installation :: Fc12 Still Has And Still Picking Up Fc11 Packages?

Mar 4, 2010

What to do? After preupgrade and update fc11->fc12, system has a mixture (oh yeah) of fc11 packages and fc12 new ones. Dependencies problems, and even by removing, reinstalling packages sometimes it's picking up fc11 ones.I tried yum clean etc to no avail. Is there any script or anything to solve this automatically? I suppose the solution is to manually erase all the fc11 packages (assuming they are really installed and not simply reported as such)?

View 14 Replies View Related

Fedora X86/64bit :: Programs That Work In FC10 And FC12 Develop In FC11

Apr 7, 2010

I have programs that work in FC10 and FC12, but when I run them on FC11, i get behaviour that is very similar to a deadlock. They don't crash or anything. It just seems that all program output stops at one point and never resumes. I am wondering if FC11 has any known threading issues that one may need to know about before trying to use it to run their software from FC10 or FC12. Maybe something in the way that threading is handled differently from FC10 or FC12 that is not necessarily a problem, but just needs to be kept in mind when writing code for FC11.

View 10 Replies View Related

Fedora Servers :: Restore RPM Packages (fc10)?

Sep 10, 2009

I made a big mistake on my FC10 machine-while trying to resolve a way to install vlc- I wrote the following command:"yum erase rpm lib".After restarting the machine fedora did not load... (might be funny- I laughed...).Do you know of a way top recover from this state? (I have the liveCD disk),

View 2 Replies View Related

Fedora :: Removing Duplicate I386 Packages On A X86_64 System After A Pre-Upgrade From FC8-FC10

Oct 19, 2009

I recently upgraded my x86_64 system from FC8 to FC10 using Pre-Upgrade. (related blog link) It appears that the upgrade process installed a steaming pile of i386 packages that are duplicates of existing x86_64 packages. I now get update errors because of this package clash. I have searched the fora and the most progress I've been able to make so far is: I apparently had 8 unfinished yum transactions so I did yum-complete-transaction 8 times and have no more incomplete transactions.

The output of package-cleanup --dupes is not very helpful:

Code:

[tim@servy ~]$ sudo package-cleanup --dupes
Setting up yum
Loaded plugins: refresh-packagekit

Yet I still get transaction errors when I run updates via synaptic. It checks dependencies and downloads everything and errs when testing changes. This is the error it gives at the moment:

Code:

Test Transaction Errors: file /etc/gconf/schemas/gweather.schemas from install of libgweather-2.24.2-1.fc10.x86_64 conflicts with file from package gnome-applets-1:2.20.1-1.fc8.i386

[code]...

View 14 Replies View Related

Fedora Installation :: Firefox And FC10 Won't Run?

Jan 6, 2009

When trying to launch firefox after upgrading to FC10, I get:Couldn't load XPCOM

View 4 Replies View Related

Fedora Installation :: Fc10 To 11 And Now STUCK?

Aug 6, 2009

I did the yum preupgrade install, all went well, did preupgrade -gui ; did everything fine, then i got the REBOOT now to start updating, clicked and i have just

View 5 Replies View Related

Fedora Installation :: Fc10 Booting Became Slow

Mar 30, 2009

I was forced to reinstall fc10 a couple of days back and from them the bootingup is really slow(takes more then 1 minute to show login screen). before the reinstall, it was quite fast. i dont know what went wrong.

[Code]....

View 2 Replies View Related

Fedora Installation :: Install Systemc V2.1.0 On Fc10 With Gcc 4.3.2?

Apr 16, 2009

I am trying to install systemc v2.1.0 on fc10 with gcc 4.3.2. I have gone through the previous posts for systemc installation with gcc 4.3.2 and have installed the patch ,
added the following headers in systemc-2.2.0/src/sysc/utils/sc_utils_ids.cpp

#include "string.h"
#include "cstdlib"

but it did not work out.This is what I get The complete installation process is as follows

$tar xvzf systemc-2.1.v1.tgz
$cd systemc-2.1.v1
$wget http://www.kix.in/misc/patch_systemc-2.1.v1-gcc4-osx // patch from post
$patch -p0<patch_systemc-2.1.v1-gcc4-osx

[code]....

View 1 Replies View Related

Fedora Installation :: Cant Execute Firefox-3.0.10 In FC10?

May 3, 2009

After to download the firefox-3.0.10.tar.bz2I have the next problem

Code:
firefox-3.0.10]$ ./firefox
./run-mozilla.sh: ./firefox-bin: /lib/ld-linux.so.2: bad ELF interpreter:

[code]....

View 11 Replies View Related

Fedora Installation :: Can't Install IE24linux On FC10

May 27, 2009

installing IE on FC10 as I need it to access company email I installed wine first as #yum install wine* then I installed cabextract as #yum install cabextract after that I downloaded IEs4linux and run the script ad $./ies4linux I got the following message in the terminal "IEs4Linux 2 is developed to be used with recent Wine versions (0.9.x). It seems that you are using an old version. It's recommended that you update your wine to the latest version (Go to: [URL])" and in the install window script couldn't download flash and it seems to be hang every thing is stopped and I didn't get any message in terminal or in installation window.

View 1 Replies View Related

Fedora Installation :: Preupgrade From FC8 To FC11?

Oct 14, 2009

it's possible to use preupgrade to go directly from FC8 to FC11.

Also, I'm wondering if this will allow me to avoid formatting my hard drive or not. I'll have backups ready just in case, but was hoping maybe I could get away with not having to do the old two-step shuffle with all my data.

View 2 Replies View Related

Fedora Installation :: Update From FC10 To Fedora 12 From The Command Line?

Dec 10, 2009

How do I update from FC10 to Fedora 12 from the command line.

View 2 Replies View Related

Fedora Installation :: FC10 Multiple Errors Right After Install

Jan 30, 2009

I have just loaded the FC9 onto a HP/Compaq D510 2.8Ghz/Intel graphic card. Everything when as expected during the install but on login I get the following set of errors. The follow Panels encounters a problem.

[Code].....

View 3 Replies View Related

Fedora Installation :: No Sound On FC10 Newer Kernel 2.6.27.15-170.2.24?

Feb 23, 2009

Just installed FC10 and noticed no sound with latest kernel (2.6.27.15-170.2.24), however I do have sound with kernel 2.6.27.5-117. No other differences. Anybody else have this problem?

View 10 Replies View Related

Fedora Installation :: Dual Boot With FC10 - XP Hangs

Mar 3, 2009

I installed fedora on my second hdd, the other one had xp before fedora, now in grub it shows xp as other and wont boot into it, just hangs there. SDC is an external drive and sdb is the xp drive as you can tell by the filesystem.

Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x836db2c4 .....

View 1 Replies View Related

Fedora Installation :: FC10 On ESATA Drive Won't Start?

Mar 5, 2009

I am new to Fedora 10 and encountered the following problem. I installed FC10 on an external eSATA hard drive (sdb) on my laptop which already has some other Linux distros on sda. I used a DVD that came with the Fedora 10 Bible, so I can assume that the DVD had no problems. The installation went OK and I got no error messages. I added the following lines to the menu.lst file of the distro that I use to boot all my distros.

title Fedora 10
root (hd1,1)
kernel /boot/vmlinuz-2.6.27.15-170.2.24.fc10.i686 ro root=/dev/sdb2 rhgb quiet
initrd /boot/initrd-2.6.27.15-170.2.24.fc10.i686.img

When I boot Fedora, the blue bar at the bottom of the screen goes half-way, then gives me the error message: "mount: could not find filesystem '/dev/root' "

View 5 Replies View Related

Fedora Installation :: FC10 I386 - How Many CDs - Of 6 - Required For Min. Install

Apr 18, 2009

I would like to try out fc10 on an old, k6-2 pc. Last night I tried to download the dvd, but firefox 'completed' the download with only 1.2/~3xg, and of course it didn't work.

I am trying a test net installation in VirtualBox, so far so good.

However, I would rather have a more complete installation on hand and I'm looking at the full install cd's --there are 6 of them.

[url]

Are all 6 required for a minimal install, or could I get by with one (or two, etc)? For example, with debian installation cds you can use just the first one -- the rest are just a complete set of packages for everything +kitchen sink.

View 1 Replies View Related

Fedora Installation :: Unable To Login After Fc8 - Fc10 Upgrade

Apr 20, 2009

I upgraded to fedora 10 using yum but i have a problem, the installation went fine and after rebooting i got a login screen. I typed in my user name and password and after a second it returns to the login screen. Im sure the username and password are correct. If i type in another password i get an error message. So how can i log in?

This is what i did to upgrade to Fc10:

Code:

Then i got an upgrade wizzard and selected Fedora 10 and than reboot.

In the grub menu only one kernel is present which is the Fc10 so couldn't use the old one.

I've tried to edit the kernel with single for single user that works gives me a command line but im just not experienced enough to figure out how i can use the command line to login.

View 6 Replies View Related

Fedora Installation :: FC10 - Need RAIDCore 5252 Drivers

Apr 20, 2009

Anyone know where I can find installation driver disk for a RaidCore 5252? I do have the source code, would I be able to create a new driver for this controller? If so, how is that done?

View 2 Replies View Related

Fedora Installation :: Fc10 Cannot Access WINXP Through Network

May 28, 2009

I have a home network with 2 WINXP machines and one I am trying to load FC10 on. If I get FC10 to work, I will convert the others to FC10. I am trying to access the WINXP machines through my LAN. I have installed samba. I have gone through a lot of places to try to configure samba. Several places say I have to set the security level on the ethernet card using system-config-securitylevel. When I enter this in terminal, I get command not found. I checked with yum and it is installed. I have tried using the menus but cannot find it anywhere. I can see the FC workgroup from one of the WINXP machines but I cannot look into it. It says I don't have the right permissions. I would like to set it so I don't need a userid/password at all. Can I do this?

View 5 Replies View Related

Fedora Installation :: Computer Cannot Start Up After Deleting FC10?

Jun 1, 2009

My laptop is dual-boot with Windows XP and FC10 co-existing. Yesterday, I wanna re-install FC10, so I formated(deleted) all linux partitions in Windows XP. Disaster happened when i rebooted computer: the computer cannot startup at all?Now, I don't know how to deal with it. I wanna know: what can i do to start up the computer into Windows? In my opinion, computer should work well without one system in dual-boot mode. If you format C: drive on which windows are installed, for instance, the computer can boot into FC10 normally. Why it die deleting FC10?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved