During the installation process, configure the network installation process requires, as a result of my wireless network card can not be drived, It is not possible to continue with the installation,please help me.
View 5 RepliesI have installed Fedora 8 on my laptop. My laptop has a " Network controller:
Broadcom Corporation BCM94311MCG wlan mini-PCI " wireless Card.
I want to get the wireless working. I did an 'lsmod' and I found that the modules for this card is not installed. I tried to start Network Manager, but network manager cannot connect to wireless but it cant. How and where can I get the drivers for this and how do I install those modules. My laptop is a Dell vostro 1400.
Here ASUSTeK Computer Inc. - Networks - ASUS PCE-N13
you may download the driver and install it yourself; once you've succeeded, I am a one-time Linux convert and quitter that gave up on Linux a long time ago, because frankly it is too complicated and I'm just a user who needs to get things done today, not in the few weeks time it takes to figure these things out. Since Debian Squeeze got released I wanna test it out, but my PCI card, ASUS PCE-N13 needs to be set up.
Driver install too technically advanced.
The accompanying instructions are far from self-evident:
================================================== =====================
Build Instructions:
====================
1> $tar -xvzf RT2860_Linux_STA_x.x.x.x.tgz
[Code].....
I suggested for my friend to install ubuntu on her new pc because she does not have access to a Windows disk. I am somewhat familiar with Linux but I have never actually used it. She says she made the install disk and installed ubuntu just fine. When she went to intall her wireless network card cd it would not work. Please tell me what to do so I can instruct her on how to set these up to make them work.
View 2 Replies View RelatedI installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.
View 4 Replies View RelatedI know that most people are using F12 and F13 but I just installed F10 on one of my machines. The Kernel is 2.6.27.5-117.fc10.i686 and the GUI is Gnome 2.24.1.I have a Trendnet wireless card already installed in the machine from when it ran XP which is in the tew-421pc/tew-423pi family. Is there a device manager/hardware installer that I can use to set up the wireless card or does anyone know of a driver install program for this card?
View 1 Replies View RelatedI have recently installed Ubuntu 10.04 beside my Windows XP on my laptop:
Dell XPS 1330
I`m now facing some problems with my new OS :
1. The driver for my wireless network card isn't recognized although I have installed the recommended driver which was in Ubuntu Hardware Driver section.
2. When I connect my laptop to my TV using HDMI port, the screen is OK but there is no sound!
3. When by any reason my network cable is unplugged, the whole network service goes down and I have to restart the system.
lspci results:
I have Fedora11 running in my machine and it has no LAN port (RJ-45). I have a wireless PCMCIA card.The model of the wireless card is NL-2511CD EXT2(ETSI).When I insert that card to the PCMCIA slot a window pops up and ask for a WEP key. My wireless router is configured with WPA but above pop-up has no WPA option. I suspect my fedora installation does not have the necessary driver for my wireless card.I want to install that driver. I can transfer that file to the machine via thumb drive since it has no network connection yet. How do I install this? Please refer below images as I'm still a newbie at linux.
View 13 Replies View RelatedI have a Netgear WG511GE PCMCIA card, and a driver from the original installation disk. I used an ndiswrapper-utils gui called ndisgtk to install the driver. I then do the following to verify an installation:
[Code]....
Unfortunately, when I put the PCMCIA card in, nothing happens. On Windows, a green light flashes even if the card is not connected to any network. At first I thought this might be a hardware issue, so I did #lspci and got:
[Code]....
Lo and behold, when I put a different unbranded Wireless PC Card in it works. I'm no expert in Networks, but to me this suggests a driver problem (i.e. the card is physically detected it just won't work). However, the correct driver was installed with ndisgtk and this was verified with #ndiswrapper -l, hence the confusion.
I'd be grateful if anyone else has had this problem/knows of this problem and is willing to share the solution with me/point me in the right direction. So far, Google has returned a few posts from a few years ago talking about patching kernels and manually building files etc (just before Prism54 became integrated into the Linux kernel).
I have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found
View 2 Replies View RelatedI just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.
View 5 Replies View RelatedI have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
I got the native driver for linux already but just don't how to do it. It is an external wireless usb card, it's from Ralink.
View 4 Replies View Related1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedI chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.
After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.
My OS is Fedora 11.
The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.
My Network controller is : Broadcom Corporation BCM4312 802.11b/g
Debian 2.6.32-5-amd64 KDE I have to make one of my computers wireless. i need some product recommendations for a wireless access point & a wireless network card.
View 4 Replies View RelatedI clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View Relatedinstalling the PCI wireless card drivers in CentOS linux. I have "Sabrent PCI-G802 PCI Wireless Card - 54Mbps, 802.11g". I tried looking in google and tried multiple ways to install the driver but failed , I have followed the instructions given in the link i.e.
performed the following steps .....
1.# tar xvzf package.tar.gz (or tar xvjf package.tar.bz2)
2.# cd package
3.# ./configure
4.# make
5.# make install
I have the original cd (this cd has linux drivers also) which came with the PCI card but its not a plug and play cd like the MS windows, the cd drive is not reading the disk (But i can open it in windows 7). I copied the installation files from the cd to usb drive on my windows 7 PC and copied them on to the CentOS /home/user directory and performed the above mentioned steps. I was successful in getting till the second step. when i did the step 3 the system is asking some thing about
"Linux kernel source directory [/usr/src/2.6.18-92.el5PAE-i386]: Configure"
I just pressed the enter button and it went to the next message which is
"Linux source tree 'Configure' is incomplete or missing!" Configuration failed
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.
View 6 Replies View RelatedI am running SLED 11 and My Networkcard is Intel PRO/Wireless 5300. In short, it is not there anymore! I mean I was connected and everything and the next time I restarted It could not detect any wireless network. I deleted the wireless network card in hopes that the OS will automatically detect it on startup and set it right but NOPE. When I check the hardware information in YAST, it is listed there and it is also working under Windows.
View 4 Replies View RelatedI am trying to install Debian Lenny via Hyper-V. I get to the point where it asks for the network card. For some reason it can not find my network card. I have a RealTek (RTL8112L PCIe Gigabit LAN controller featuring AI NET 2 built on motherboard).
For some reason it doesn't see it. My issue is if I continue without the network how am I getting the drivers? Unfortunately Hyper-V doesn't support USB. I guess I can try to burn to CD but not looking to waste a cd for 480k and not sure that will work as I only see a auto.sh and a couple other files under scr directory. If anyone has any ideas please let me know. This is a fairly new Motherboard/NIC so I do not understand why it isn't recognized. I know it cant have everything but Realtek is a fairly common nic.
i've installed openSuse 11.2 on my laptop (dell studio 15).Today at work i tried to connect to the wireless network, but i couldn't. First, the network card wasn't being recognized, but after a long time trying i was able to set it up, for this i used this command:
Code:
zypper in broadcom-wl broadcom-wl-kmp-desktop
So now, the networkmanager detects all the networks around, but i cannot (or i don't know
[code]...
I have a Dell Latitude D800 with a Dell Wireless 1350 (802.11b/g) WLAN miniPCI Card. I need to install wireless on this laptop but I see no wireless card when I know I have the above wireless card. Here are some commands that I ran that I might prove useful:
[Code]....
I've been in a difficult situation since we're having only wifi and there is no way to connect my laptop to the internet via a LAN cable.
Debian's packages don't support my wireless card. However this one works: [URL]
Is there any way to install this driver for the Installer to connect to the internet while installing?
I don't know what exactly to do when the Installer ask for my network driver so that I can use it.
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
I try to install Debian 8 on my desktop PC that has a wireless network card.I had already used this computer with debian 7 and I could use my problem-free network connection.
My network card is : Asus PCE-N10
During the installation, a message occured to ask me to load a firmware (rtlwifi/rtl8192cfw.bin) which is loaded from a USB key.After this, Debian-installer seems to find my wireless card but can not find wireless network.I have this message, translated from French: "The search for an available wireless network failed" and I can enter an ESSID but inconclusive.
I have loaded Fedora 10 (do i need 11 now?) on my Lenovo T-60 laptop. but---went to connect to my wireless and it won't. it's enabled and i have done most things i can think of. which shouldn't be a lot to connect. So--is there a trick here? i was using PCLinux2009 before and it connected with no problem immediately.
View 2 Replies View Relatedi have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies View Related