What's the easiest way of formatting SD cards to FAT32 in Fedora linux?
Also, I'm having trouble when I try to unmount the volume of a SD card, there's 0.8 GB being used that I expect to be cleared when I choose to 'empty trash', everytime I select 'unmount volume' the SD card window just shuts down instead of clearing that space.
I formatted 56 GBs of my hard disk space into fat32 and it seems that 27 gbs of it is used! Though direct checking from the volume itself shows nothing like this, gparted still insists 27 gbs are used.
View 4 Replies View RelatedI have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?
View 1 Replies View RelatedI converted one of my old iPod touches into a external harddrive, and i wouldnt mind a small tuorial on how to format my Ipod(USB) to FAT32? I'm on a netbook, and i want to delete Fedora and install BAckTrack instead. and without a CD/DVD drive or really much free money, i gotta use my iPod to do this.
View 8 Replies View RelatedI have 2 fat32 partitions that I use for things that I share between windows and fedora
I decided to merge them into one partition so I did this with cfdisk by deleting them creating and creating 1 large fat32 partition with the free space. When I boot my machine I am presented with:
grub>
I used the fedora cd to "rescue a broken system" and everything seems fine? I didn't touch any partition besides my extra fat32 partitions and my /boot partition is bootable. How do I tell this minimalistic grub to use my normal grub.conf?
I have used ubuntu distribution in wich i can install grub on a fat32 Filesystem. Can i install Grub on a fat32 filesystem with Fedora 12?
View 6 Replies View RelatedI have a dual booted system - windoze and f12 (64bit). I try to have all partitions mounted in fedora so have edited my fstab. This has been successful for my ntfs partitions but on boot fat32 is not a recognized filing system? Fortunately I don't need the partition but would be good to know how to label it?
View 4 Replies View RelatedI have some files and directories (some mixed case, and some all uppercase) that I have copied on a FAT32 USB stick, and when I load this on FC11 all the files and directories that have/are less then 8 characters (ie that fit into the 8.3 format) all go to lowercase.
View 1 Replies View RelatedI have a single 6.2Gb file that needs to go on a fat32 format hdd, does anyone know of a way to split the file so it will fit.
View 2 Replies View RelatedI'm trying to format the output of ls -l, any help is appreciated
Quote:
[david@barca boot]$ ls
efi
grub
david@barca boot]$ cd efi/
[david@barca efi]# ls
EFI
[david@barca efi]# cd ../grub
[david@barca grub]# ls
device.map
now to long list files in each directory using one line:
Quote:
[david@barca boot]$ ls -l *
efi:
total 2
drwxr-xr-x. 3 root root 1024 May 13 2010 EFI
grub:
total 319
-rw-r--r--. 1 root root 70 Oct 26 17:12 device.map
How can I format the output of ls to get it all in single lines:
Quote:
drwxr-xr-x. 3 root root 1024 May 13 2010 efi/EFI
-rw-r--r--. 1 root root 70 Oct 26 17:12 grub/device.map
Any thoughts?
how to mount windows xp fat32 drives in fedora core 7
View 1 Replies View RelatedI have been trying to figure out how to format my hard drive when I'm installing Fedora 11. When I boot from the live disk, all installation were done automatically, so I didn't see how I can do it. I tried googling it, but didn't find anything on how to do it either.
View 3 Replies View RelatedMay I have a step-by-step guide on mounting and formatting a DVD+R disc on my laptop?
View 1 Replies View RelatedHow would I format my partition into a ext3 file system?
View 1 Replies View RelatedI booted fedora from an live cd not i have a problem when i want to install fedora formatting is taking vey long its already busy for 1 hour and this is te second time im trying to install fedora does it need to take this long ? I've got an unexpected fault for the second time and pressed debug but nothing is happening keeps formatting.
View 3 Replies View RelatedI have installed fedora 14 xfce.
However, I want to totally format the hard disk so I have no operating systems left on there.
I have created a usb boot disk for installing windows.
So I want to re-format the whole hard disk. Then boot up with the usb and install windows. Once I have done that. Then use the rest of the hard disk to install Fedora 14 from my other usb.
However, I am not sure how to completely format the hard disk. I want to start from a clean disk.
Sometimes it does this and other times it does not. It has happened with 2 hard drives. When it formats the partition the bar stops and the mouse pointer graphics stops.
View 3 Replies View RelatedI'm trying to install SL6 to a pair of 2TB harddisks in a RAID 1 array. The problem is that when the "Formatting" progress window that says "Creating ext4 filesystem on /dev/mapper/pdc_eahgdeafbgp1" comes up it appears to eventually freeze. It's been like that for 6 hours without the progress bar moving at least. I have another identical system that I booted up using the gparted live cd to see if I could get any more information using that. I first created a 500MB ext4 partition and mkfs.ext4 ran almost instantly. I then tried 5GB and it seemed to take maybe about a second or two and worked fine. I then jumped up to 500GB and it's been running for about 5 hours now. I'm pretty sure that I remember the creation of an ext4 filesystem occuring extremely fast even for very large partitions, but this is the first time I've played with RAID.
View 3 Replies View RelatedI want to install Fedora KDE spin on an existing XFS partition without formatting it. (Since said partition is full of my data that I have nowhere else to put). But the installer doesn't allow me to set the partition as / without formatting. XFS is not one of the filesystems listed as options for formatting. How can I make Fedora do what I want?
View 7 Replies View RelatedI've a flash drive that it's partitions formatted as fat32, ex4 and encrypted ext4. It works fine on the system that I've formatted it on, but when I try to use it on my other Linux distributions I get these problems:
* ext4 partition accessible by root only.
* after entering my pass-phrase I get
Code: /dev/mapper/udisks-luks-uuid-***** uid1000 is mounted What I'm asking for is a way to create the ext4 file system without being attached to some UID and to be accessible by any user.
I've got a Dell Xeon with two video cards - an nVidia Quadro2 MXR/EX/Go and an ATI Radeon 7000/VE. Under Fedora 10 Xinerama worked just fine, but I recently upgraded to F14 and Xinerama no longer works.The X server tries repeatedly to start but fails, with gdm-binary eventually giving up in disgust. If I comment out the ''Option "Xinerama" "On"' line it starts up (see attached xorg.conf), albeit with a few quirks. I have two X screens (:0.0 and :0.1 - one for each monitor), where :0.0 works just fine but :0.1 has no window manager - I can bring up windows on it but they have no window border ( no min/max/close buttons, can't be resized, etc). The mouse moves freely from one monitor to the other, but windows don't.The error messages I get when I try to use Xinerama are as follows. In /var/log/messages I get:
Mar 10 10:32:41 valdez kernel: [60328.892005] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Mar 10 10:32:41 valdez kernel: [60328.892477] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Mar 10 10:32:41 valdez kernel: [60328.907615] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
Mar 10 10:32:41 valdez gdm-binary[21435]: WARNING: GdmDisplay: display lasted 0.457045 seconds
[code]....
I've tinkered around with xrandr a bit but have had no luck - mostly the screen flickers briefly and things continue on as they were before.
Wan (mail) is by way of wireless internet into a linksys (PPPoE) 192.168.1.1 router and then only to the mailserver into etho0 192.168.1.3. Mailserver also has etho2 192.168.1.2 connected to a switch that has 3 pc's attached and an adsl router for pc internet access. Server does not provide proxy for pc's. Just mail. Linksys is 192.168.1.1 and can be seen by the isp provider. The server wan is 192.168.1.1 and can ping to 192.168.1.1 and can browse the net via linksys. The lan connection is 192.168.1.2 and this should be visible to the pc's but it doesn't appear to be and can't ping a pc although the switch lights show it is connected.
etho0 192.168.1.3, 255.255.255.0 & default gateway 192.168.1.1
etho2 192.168.1.2, 255.255.255.0 & nothing for default gateway.
DNS is blank for hostname and primary dns is 192.168.1.1. secondary, tertiary and dns search path are all blank. Should there be a default gateway for etho2 even though it only has a lan connection ? If I gave it the adsl gateway then how would the server know which card to use for outside access?
Last update: 8/25/2011 Table of Contents
Introduction
Step 1: Identify the chipset of the wireless device
Step 2: Choose the right driver
Step 3: Install the driver
How to install and use b43 and b43legacy How to install and use the Broadcom 802.11 Linux STA driver (broadcom-wl) How to install and use b43-openfwwf
[Code]...
Greets all and congrats on the developers on bringing us another great version of Fedora. My box has an Nvidia GForce4 MMX 440 SE 64MB SDRam. I downloaded and updated from F11 to F12 last night. Before I went to bed It booted to a blank screen, GDM didn't want to start. I decided to investigate in the morning and went to bed. The first problem I found was that the F11 Legacy Nvidia Drivers were causing a problem, so I had to remove those. I also did an update with yum to get everything 100% updated. Then rebooted, more problems. GDM did NOT want to start for anything. More investigating found that the culprit was this nouveau kernel mod. Well, I had the xorg nouveau driver installed and I thought that this might be one in the same so I removed the xorg one with no avail, the nouveau kernal mod still loading. Seems that they are different and one is used for the xorg server and the other is used for the framebuffer console. I had to pass nouveau.modset=0 to the kernel at boot time to rid myself of the framebuffer. GDM starts now and I have resinstalled the xorg Nvidia nouveau driver though I have not tested it as of yet. Is there a better way at disabling the framebuffer boot up then by passing things to the kernel?
Edit: I take all that back. Upon further tinkering, reading, and investigation. The problem seems to be two fold: 1) The legacy nvidia drivers pissed and moaned about permission so I removed them. 2). This one I over looked and was causing me most of my grief. I didn't change the xorg.conf video driver from nv to nouveau. I did this and it works fine now. It seems that the "Linva-config-display" And I am sorry that I do not know exactly what this is at the moment. But this would automatically change the video driver from nvidia to nv if I manually changed it in the xorg.conf file after I removed the nvidia drivers. So I ASSUMED(my big mistake) that it would automatically see the nouveau driver and replace the nv with that. I was very wrong. After I added it manually, I rebooted and it runs fine now.
Due to the miss of proprietary drivers from AMD for Fedora 12, I have installed a second video card in my system (a Nvidia one) for BOINC calculation. This card is not connected to a monitor.
So in the system I have this two cards:
ATI Shappire Radeon HD2600XT (256MB)
Asus Nvidia Geoforce 6600 (356MB)
The ATI is in the first PCI express device, the Nvidia to the second PCI express:
Code:
So I have used this Xorg configuration file (if I let Xorg to configure without the configuration file, it sets NVidia to default card and X files to start):
Code:
The Nvidia driver were installed as described in some forum:
1) disabling nouveau in grub configuration
Code:
2) Take SElinux to alow the driver:
Quote:
With this, the driver is correctly loaded in memory:
Code:
But the Xorg says that not Nvidia Driver where found (see the attack file).
These are the NVIDIA driver installed:
Code:
What can I do to make NVIDIA driver to work?
I am a bit overwhelmed with all the information out here, and can't get this to work properly after trying to for two days. I have a PCI ATI card(Sapphire Radeon 9250):
00:08.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
00:08.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
of which I am only wanting to use the Primary, and my onboard video:
01:00.0 VGA compatible controller: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] (rev 01)
right now my xorg.conf is empty and I only get a display off my ATI card. How can I get my onboard to display as well like it does in windows?
I've tried many ways that I found and nothing seems to work.
I just installed Fedora 13 on my desktop computer and ran into the same problems I did when I tried to install which was i could connect to a network but couldn't access the internet. I decided to install Fedora 14 since I already installed it on my laptop. I'm still running into the same issue, I can connect to my network but cannot connect to the internet using my PCI NIC or onboard NIC. Networking is enabled and I'm getting a IP address from my router. I ran "lspci" and it shows me both network cards which, please correct me if I'm wrong, makes me think that the drivers are installed.
I'm also curious if the VNC client/server could be used through a WAN. I would like to remote into my computer at home when I'm not there and see the gui. I had SSH installed at one point but it was just text. If there is better program please let me know. why I would have Services on my laptop but not on my desktop? Both computers are running the same version. Both cards are enabled and set to connect automatically. I can get a IP with both NICs. I only have one plugged in at a time.
I have just upgraded to Fedora 14, with some hope that a F13 kernel crash issue would be resolved. Alas, not, and I have lost audio in one of my sound cards. I am using 2 sound cards in my computer. The first one (VT 1708 on the M2V MX SE motherboard) is used for FLDIGI (ham radio program). The other one (Creative Labs SB Live!) is tied to a speaker/microphone. At some point in mid 2010, I started getting kernel crash reports (not sure which kernel version this started), and the VIA VT 1708 audio controller stopped working. The SB Live! card works fine.
From mesg, I get:
[9.181148] WARNING: at drivers/pci/pci.c:105 pci_ioremap_bar+0x2c/0x5b()
[9.181186] [<c05c36ad>] ? pci_ioremap_bar+0x2c/0x5b
[9.181194] [<c05c36ad>] pci_ioremap_bar+0x2c/0x5b
[9.181299] ALSA sound/pci/hda/hda_intel.c:2510: ioremap error
I've just pulled out the SB LIVE! card to see if it is causing the VT 1708 controller to fail...there appears to be no interaction.
From lspci -v, I get:
20:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 8290
Flags: fast devsel, IRQ 17
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
Kernel modules: snd-hda-intel
So it seems to know it's there. How to get my sound back (and get rid of this kernel crash every time I start my computer)?
I have onboard video card (GeForce 6150SE nForce 430) and I install one PCI-E video card (GeForce 7300 GT). In BIOS I set primary video cart to onboard. Is it possible to work simultaneously? lspci -v command showing both, but nvida-setting, nvidia-xconfig and system-config-display only show one, never both.
lspci -v
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASRock Incorporation Device 03d0
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
[code]....
My laptop has these Broadcom chipsets (from lspci):
Code:
00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02)
02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 01)
The 4321 is working fine with wl, but I can't figure out how to get the 4306 working. As I understand, I can't use wl for that one. I once had it working (in FC10 or so) with b43legacy, which is now blacklisted for wl. Unblacklisting it alone doesn't make the other card work. Is there some other configuration I need to do?