Fedora Hardware :: Dual Video Cards - ATI PCI & Via Onboard ?
Oct 17, 2010
I am a bit overwhelmed with all the information out here, and can't get this to work properly after trying to for two days. I have a PCI ATI card(Sapphire Radeon 9250):
00:08.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
00:08.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
of which I am only wanting to use the Primary, and my onboard video:
01:00.0 VGA compatible controller: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] (rev 01)
right now my xorg.conf is empty and I only get a display off my ATI card. How can I get my onboard to display as well like it does in windows?
I've tried many ways that I found and nothing seems to work.
View 2 Replies
ADVERTISEMENT
Oct 19, 2010
Is there a simple way to have both of the monitors on a system enabled? The video cards are both older ATI cards. One is a Radeon 9000 AGP 64MB, and the other is quite a bit older (ATI 3D Rage Pro 2x). When Ubuntu 10.10 is booting up, the splash screen appears nicely on the left-side monitor, and then the final desktop appears on the right-side monitor, but when I go to system --> preferences --> monitors, only one monitor is available. I'm guessing the right monitor is fed by the Radeon (I can check if it matters). If the splash screen appears on the left side when booting, why isn't that display available after the bootup has completed?
View 1 Replies
View Related
Feb 27, 2011
I am trying to resolve an ongoing fight involving /dev/video node assignment between 2 TV Tuner cards and a USB video camera.
Each time I reboot the three devices seem to shuffle their /dev/video assignment. i.e. what was /dev/video0 (USB camera) after a reboot magically becomes /dev/video1.
This causes all kinds of grief between my MythBackend and ZoneMinder who expect the devices to have static assignments.
how to best solve this? I did a brief search and one solution appears to be to statically assign the devices.
View 3 Replies
View Related
Apr 13, 2010
I would like to get my Slackware 11 to work with the Broadcom NetLink BCM5787 onboard Ethernet Cards (x2). I have downloaded the tg3 driver from the Broadcom site. I copied and extracted the driver onto the Linux harddisk. When I wanted to build it I got the message, tg3_compat.h: error : redefinition of 'msecs_to_jiffies'previous delay.h : error: definition 'msecs_to jiffies" was here"
View 3 Replies
View Related
Jun 19, 2011
Got a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies
View Related
Jan 31, 2010
Due to the miss of proprietary drivers from AMD for Fedora 12, I have installed a second video card in my system (a Nvidia one) for BOINC calculation. This card is not connected to a monitor.
So in the system I have this two cards:
ATI Shappire Radeon HD2600XT (256MB)
Asus Nvidia Geoforce 6600 (356MB)
The ATI is in the first PCI express device, the Nvidia to the second PCI express:
Code:
So I have used this Xorg configuration file (if I let Xorg to configure without the configuration file, it sets NVidia to default card and X files to start):
Code:
The Nvidia driver were installed as described in some forum:
1) disabling nouveau in grub configuration
Code:
2) Take SElinux to alow the driver:
Quote:
With this, the driver is correctly loaded in memory:
Code:
But the Xorg says that not Nvidia Driver where found (see the attack file).
These are the NVIDIA driver installed:
Code:
What can I do to make NVIDIA driver to work?
View 2 Replies
View Related
Mar 17, 2011
I have onboard video card (GeForce 6150SE nForce 430) and I install one PCI-E video card (GeForce 7300 GT). In BIOS I set primary video cart to onboard. Is it possible to work simultaneously? lspci -v command showing both, but nvida-setting, nvidia-xconfig and system-config-display only show one, never both.
lspci -v
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASRock Incorporation Device 03d0
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
[code]....
View 7 Replies
View Related
Sep 8, 2011
I am trying to put together a list of nvidia cards with the aim to include the nvidia driver for listed cards in autoplus etc..so what id like is the output oflspci -nn |grep VGA Quote:eg:02:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8500 GT] [10de:0421] (rev a1)Please could you post them here http://dnmouse.org/support/ you dont need/have to put your real name and email anything will do
View 10 Replies
View Related
Dec 20, 2010
My PCI-E Nvidia card died, and I want to use the onboard video from my H55 chipset, which Windows identifies as "Intel 5 Series/3400 Series". This is on 10.04 LTS.I did 'apt-get purge nvidia*' followed by adding "intel" as the driver in xorg.conf, but on boot I get the message:
Code:
intel0: no valid modes found
Screen(s) found but none has a usable configuration
Current xorg.conf:
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
[code]....
View 4 Replies
View Related
Dec 24, 2010
everex gPC2 tc2512 they went under
ubuntu 804 hardy
no windows
single boot
my onboard video is going bad.i have a radeon 9250 pci 256mb v/d/vo card.i would like to install before the onboard goes all the way out.how and what all do i need to do.what do i look for and change in the bios.yes it may be the power pack but if not i can not install the video card later
View 9 Replies
View Related
Jul 26, 2010
I'm looking at upgrading my motherboard and graphics card. Ideally, I'd like to have 2 monitors running at once (DVI), and an output to an LCD projector (HDMI). If I can't have all 3 working at once, I'd like the 2 monitors on all the time (off the graphics card), and then switch from the monitors to the HDMI output so that only the projector is getting video.
So, If I get a motherboard with onboard HDMI, would it be possible to run the HDMI out at the same time as the graphics card output?
View 1 Replies
View Related
Jun 17, 2010
I installed Edubuntu 9.10 on a Dell Optiplex GX260. This system has onboard INtell 846G series video. I want to install an NVIDIA video card. I popped it in the case, diabled the onboard video. I get the POST, the GRUB, no problem. But once I get past the GRUB, all I get is a blank screen. The HDD does not sound like Ubuntu is loading.
View 9 Replies
View Related
Sep 8, 2010
I just built a computer and the onboard nic pluggin is loose and won't register or connect right... so I had to put another nic card in pci to connect to wired network for internet. Problem now is its delaying something fierce... i'm thinking if i can manage to uninstall or disable the onboard nic maybe things would work better... problem is i wouldn't know how to do it... I know hardware is connected via a document somewhere in the file system... if I were to delete the file would that disable the nic or would it just reinstall itself on the next boot?
View 1 Replies
View Related
Jan 28, 2011
I just replaced my motherboard with a Gigabyte 890GPA-UD3H. I am happy to report that the OS (Ubuntu 10.04) was smart enough to boot up using the pre-existing software RAID 5 (four disks) and work fine with the new motherboard, CPU, and memory. However, since the new motherboard has a nice onboard display, I removed the PCIe graphics card (which was needed on the old board), and am now trying to configure the OS to use the "OnChipVGA."
This is what lshw produces
And here is what I get with startx:X.Org X Server 1.7.6
Fatal server error:
View 7 Replies
View Related
Apr 25, 2010
I'm having trouble getting X to work after switching from onboard intel video to a 5000 series ATI card. Apparently I need to switch to a MESA or fglrx driver. I did a sudo apt-get install fglrx-driver and it installed but still no X. I'm currently using Karmic. I've tried to boot with a live CD which works fine and changed the xorg file manual but that was a mess.
When I start I get a checking battery state ... done and it stays there forever sometimes and sometimes I can login but without x. Typing startx gives me a long list that says check the xorg website. I've been looking around for a way to fix this and haven't been able to get it working.
View 6 Replies
View Related
Jul 5, 2009
I am looking into buying a better graphics card, most likely Nvidia, for my HP D330 DT.How do you tell if the graphics card is compatible with your machine?One more thing, is there a way to tell if my GPU is an, AGP, PCI, or PCI express without opening my computer??
View 9 Replies
View Related
Jun 14, 2011
I'm building another desktop. This is not a gaming system (though some video does cross my path), it's primary focus is as an application development platform. The thing is based on a SuperMicro two CPU motherboard with a couple intel multi-cores, 16GB RAM, a hardware RAID, and CentOS 5.6 (64bit). To this mix I would like to add a solid dual-head graphics card. Something that will support a couple HP LP2465 monitors (not new but functioning well). Speed of rendering is not my biggest concern, stability and "real estate" (the monitors are 1920x1200 and I want all of it).
I've looked a little at the Matrox items and started researching nVidia, but would like to hear opinions from those "in the know".The motherboard, though a solid performer, may have just made this trip unnecessary. It has a quirk that I hadn't considered before. It has several PCI-X slots (64-bit @ 133MHz) but only one "PCI-Express 1 (x8) on a (x16) slot". Does that seem a little strange to anyone else? Not that there is just one PCI-E but that it will fit a x16 board but will only support x8 connections...
View 14 Replies
View Related
Aug 6, 2011
I am a new user to opensuse, coming from ubuntu. I have a usb to vga external video card that allows me to plug in an external monitor to a usb port.Tritton SEE2 UV150 Looking around there is a deb file available for ubuntu and the sources are on the suse build service. Though it does not say its available for suse. So im wondering if anyone else has used one of these devices and/or knows how I can get it to work. The pages i have found related are here:
[URL]
View 4 Replies
View Related
Jul 17, 2010
I set up a Ubuntu machine using the OnBoard video, and it runs OK.
Now, I put a nVidia card in it (2009'ish 512mb), and there is no screen after the BIOS screen.
If I boot off a Live CD, everything is fine, so the card is supported.
How do I get Ubuntu to look for the new card on bootup? Do I have to reinstall? If so, will it wipe out the installed applications and data?
Code:
cd / (this gets you to root)
cd etc
sudo chmod 777 X11 (this permits changing names)
cd X11
sudo chmod 777 xorg.conf.failsafe
[Code].....
View 5 Replies
View Related
Sep 6, 2010
I have 2 video cards installed, and I only have one 22" monitor (1680x1050 pixels).ATI Radeon HD 4290 Nvidia 7300 GT Silent How can I make the both video cards render OpenGL stuff at the same time? Is it even possible?
And which GPU is faster? ATI Radeon HD 4290?
View 8 Replies
View Related
Feb 25, 2010
I have recently decided to use ATI video cards again due to poor linux support several years ago. I currently have a Radeon HD 3000 series card however I have been unable to install the fglrx driver under Debian Lenny 64. It seems that the Catalyst 10.4 driver is not compatible with the Xorg version in Lenny.
So far the NVIDIA has been very good at making drivers available for the latest linux versions. I have been running Debian Sid with an NVIDIA card with relatively few problems.Is it still best to avoid ATI graphics cards or is this just a temporary problem?
View 1 Replies
View Related
Feb 11, 2010
I'm having a rather hard time getting my 3 monitors setup as one display. I can get all three to work without too much heartburn using 3 separate X instances. The monitors are on 2 different video cards, one dual heads. The other on it's own card.
I've tried countless ways to get this to work, and I'm just not feeling the love. There are 2 17 inch monitors on the 1 video card and then the second video card has a 24 inch monitor on it. I can get the two monitors on one head to work with twinview, but the third one is left out.
The physical configuration looks like this..
17inch on the left of the 24 inch monitor, and another 17 inch monitor on the right, with the 24 inch monitor being in the center.
I'm going to include my current xorg.conf and lspci.
xorg.conf
Code:
harry@ubuntu:~$ cat /etc/X11/x
xinit/ xkb/ xorg.conf xorg.conf.backup
harry@ubuntu:~$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
[Code].....
View 3 Replies
View Related
Mar 22, 2014
I'm having problems configuring a second video card in Debian 7.4 on GNOME. I've tried running Xorg -configure but that errors. When I run xrandr that only seems to pick up 1 screen.
Here is a section of my xorg.conf file:
Code: Select allSection "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
[Code] .....
The current effect is that the second screen seems to fire up and display a debian logo, and I can move the mouse pointer on to it, but I can't place any windows on there. Also, every time I log out and log back in, GNOME creates an additional instance of the menus (I now have 3 "Applications" and 3 "Places"). It sort of suggests that it is trying to use multiple monitors, but getting it wrong.
View 3 Replies
View Related
Mar 7, 2010
I installed fedora 12.
I have 2 ATI cards that I used to use on windows to run 4 monitors. A recurring problem has been to get them detected in linux. Only my secondary card is picked up linux. When I manage the displays it detects the 2 monitors connected that card.
What are the specific steps I should take to get the second card detected? Supposedly there is a tool system-config-xfree. I don't have it, yum can't find it.
Also I heard it has something to do with editing some xorg.conf file or something to that effect. I have absolutely no idea how to find the "bus id" of my card, or lookup the horizontal refresh rates, etc..
I would probably have no problem following the documentation & editing the file if I knew a good way to find these values.
Someone also suggested installing linux twice and saving the xorg.conf it generates each time (with different card each time) and then merging the two by hand. That is like killing a fly with a hammer though, when I do this again and again in the future It'd be nice to not have to take twice as long.
View 1 Replies
View Related
Apr 27, 2010
In Ubuntu Lucid Lynx RC, I got NVidia's TwinView to work with 2 monitors in a single video card. But when I use the same monitors but split them between the video cards I can't make TwinView work and it starts a X server for each monitor. I want the same effect I had with one video card.
View 1 Replies
View Related
Jul 12, 2010
I was just wondering if is an easy way to configure three monitors run across two video cards (Nvidia Leadtek GTS250 PCI-E 2.0 1G 2DVI ) 2 on one, 1 on the other under the one xserver? I tried to get it going using the Nvidia driver package with no luck - 2 monitors seemed to be simple to configure using Twinview setting on a single xserver (my current settings) and I was hoping their may be a simple extension for three and if so is there an easy way to go about this? (I am new to Ubuntu).
[Code]...
View 9 Replies
View Related
Oct 19, 2010
what would you recommend for ubuntu video/sound cards that work pretty much out of the box?
[code]...
View 1 Replies
View Related
Dec 14, 2010
I've been using linux for roughly 12 years now but I've always avoided linux on the desktop since touching X back in the day was quite a hassle. I recently decided that rather than keeping my windows desktop full of 15 PuTTY instances, I should rock the *nix desktop.
I started by installing Ubuntu 10.10 Desktop. It detected my two monitors handing off a pci express card just fine. I decided to install the ATI drivers when it prompted me - the proprietary drivers would let me select to use the monitors separately, but would always just default back to mirroring the screens. I was unable to get it to stop that, so I had to go back to the open source drivers. Which is fine, I don't really need the 3d accel. Roll forward a week, I ordered another video card to add another screen. I purchased another ATI card, since word on the street is that same-vendor chipsets play best together. This one had to be PCI, if this matters.
dmesg reports the new card is fine and happy, but the Monitors GUI thing doesn't detect any monitors off the new card, or report anything about it. So: what should I do to make the second video card get noticed?[URL]...
View 6 Replies
View Related
Jan 24, 2011
Been looking around and have been trying for 4 days to get my 3 monitors to work with my 2 video cards , When the system starts up I get the bootup screens on the 3rd monitor , then the login box shows up on the 1st monitor and when logging out I see the shutdown screen on the 3rd monitor again , so I know ubuntu see's it , but not sure how to include it in the regular desktop . It's just a lighted very dark red and I can't move my mouse or any windows over to it , here is my xorg.conf that I modified and tried to get it to work with :
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@palmer) Mon Oct 4 16:01:38 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
[Code]...
View 5 Replies
View Related
Jul 8, 2010
I have this Asus UL30VT notebook, with two video cards, an Nvidia G210M (which apparently isn't supported by Nvidia for Linux, but I've read somewhere that it's possible to make it work) and an Intel card (I can't find the model name). On Windows, it is possible to switch between these two cards for battery saving reasons. Anyway, I don't really care about this on Linux. I would just like to make the Nvidia card work somehow.
One of my doubts is: how do I know if Linux is detecting both video cards?What I'd like to know is, how can I make sure whether Linux is correctly detecting the Nvidia card or not? Is lspci enough?And if we suppose that Linux is aware of the presence of the Nvidia card, how do I know which card it's using? Right now I can infer it's using the Intel card from the X log, but is there any other way (I don't know, any "/proc/..." files) to know?
View 3 Replies
View Related
