Fedora :: F14 And Xinerama With Both NVidia And ATI Cards?
Mar 16, 2011
I've got a Dell Xeon with two video cards - an nVidia Quadro2 MXR/EX/Go and an ATI Radeon 7000/VE. Under Fedora 10 Xinerama worked just fine, but I recently upgraded to F14 and Xinerama no longer works.The X server tries repeatedly to start but fails, with gdm-binary eventually giving up in disgust. If I comment out the ''Option "Xinerama" "On"' line it starts up (see attached xorg.conf), albeit with a few quirks. I have two X screens (:0.0 and :0.1 - one for each monitor), where :0.0 works just fine but :0.1 has no window manager - I can bring up windows on it but they have no window border ( no min/max/close buttons, can't be resized, etc). The mouse moves freely from one monitor to the other, but windows don't.The error messages I get when I try to use Xinerama are as follows. In /var/log/messages I get:
Mar 10 10:32:41 valdez kernel: [60328.892005] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Mar 10 10:32:41 valdez kernel: [60328.892477] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Mar 10 10:32:41 valdez kernel: [60328.907615] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
Mar 10 10:32:41 valdez gdm-binary[21435]: WARNING: GdmDisplay: display lasted 0.457045 seconds
[code]....
I've tinkered around with xrandr a bit but have had no luck - mostly the screen flickers briefly and things continue on as they were before.
View 1 Replies
ADVERTISEMENT
May 21, 2010
After working on trying to get my 3 monitors to work with Ubuntu 10.4 and my ATI Radeon HD3200 (IGP) and HD4850 cards, I just had to share the xorg.conf. I am using the default open source drivers that came with 10.4 and I kept KMS enabled (it wouldn't work without it).
Here is my conf:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "4850-2-Screen"
Screen 1 "4850-1-Screen" RightOf "4850-2-Screen"
Screen 2 "3200-Screen" RightOf "4850-1-Screen"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "on"
#OPtion "Clone" "off"
EndSection .....
View 9 Replies
View Related
Nov 18, 2009
Greets all and congrats on the developers on bringing us another great version of Fedora. My box has an Nvidia GForce4 MMX 440 SE 64MB SDRam. I downloaded and updated from F11 to F12 last night. Before I went to bed It booted to a blank screen, GDM didn't want to start. I decided to investigate in the morning and went to bed. The first problem I found was that the F11 Legacy Nvidia Drivers were causing a problem, so I had to remove those. I also did an update with yum to get everything 100% updated. Then rebooted, more problems. GDM did NOT want to start for anything. More investigating found that the culprit was this nouveau kernel mod. Well, I had the xorg nouveau driver installed and I thought that this might be one in the same so I removed the xorg one with no avail, the nouveau kernal mod still loading. Seems that they are different and one is used for the xorg server and the other is used for the framebuffer console. I had to pass nouveau.modset=0 to the kernel at boot time to rid myself of the framebuffer. GDM starts now and I have resinstalled the xorg Nvidia nouveau driver though I have not tested it as of yet. Is there a better way at disabling the framebuffer boot up then by passing things to the kernel?
Edit: I take all that back. Upon further tinkering, reading, and investigation. The problem seems to be two fold: 1) The legacy nvidia drivers pissed and moaned about permission so I removed them. 2). This one I over looked and was causing me most of my grief. I didn't change the xorg.conf video driver from nv to nouveau. I did this and it works fine now. It seems that the "Linva-config-display" And I am sorry that I do not know exactly what this is at the moment. But this would automatically change the video driver from nvidia to nv if I manually changed it in the xorg.conf file after I removed the nvidia drivers. So I ASSUMED(my big mistake) that it would automatically see the nouveau driver and replace the nv with that. I was very wrong. After I added it manually, I rebooted and it runs fine now.
View 1 Replies
View Related
Jan 21, 2010
so this is my first post but i have finally gotten linux installed. i currently have debian installed i have 2 different video cards installed
Radeon X600
GeForce4 MX 4000
i know you are probably saying, why in the world do i have an ATI and an NVidia in the same box? because i found one lying around and installed it. i have gotten X to start up and i have a separate X session in each monitor. what i want to do is enable Xinerama but when i put it in to my xorg.conf X wont start at all so basicly i was wondering where the problem lies.i am using the radeon and nv drivers i have read sometimes the nv drivers dont work and also that the module "glx" may also cause problems. i dont want to invest in a bunch of new video cards to get this to work but i just might have to. here is my xorg file
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" RightOf "Screen1"
Screen 1 "Screen1" LeftOf "Screen0"
[code]...
View 2 Replies
View Related
Jan 31, 2010
Due to the miss of proprietary drivers from AMD for Fedora 12, I have installed a second video card in my system (a Nvidia one) for BOINC calculation. This card is not connected to a monitor.
So in the system I have this two cards:
ATI Shappire Radeon HD2600XT (256MB)
Asus Nvidia Geoforce 6600 (356MB)
The ATI is in the first PCI express device, the Nvidia to the second PCI express:
Code:
So I have used this Xorg configuration file (if I let Xorg to configure without the configuration file, it sets NVidia to default card and X files to start):
Code:
The Nvidia driver were installed as described in some forum:
1) disabling nouveau in grub configuration
Code:
2) Take SElinux to alow the driver:
Quote:
With this, the driver is correctly loaded in memory:
Code:
But the Xorg says that not Nvidia Driver where found (see the attack file).
These are the NVIDIA driver installed:
Code:
What can I do to make NVIDIA driver to work?
View 2 Replies
View Related
Nov 26, 2008
I heard a lot about NVIDIA Xinerama & Compiz not working but on looking further, in recent times people have got them to work. I've setup Xinerama with 4 monitors working across 2 dual video cards and it works great. I have the latest NVIDIA drivers (using the one-click) and I just installed the latest compiz using one-click as well.
The cards are as follows:
Chip: 0 is -> NVIDIA GeForce 8600 GT 01:00:0 0x10de 0x0402 AGP nvidia
Chip: 1 is -> NVIDIA GeForce 8600 GT 02:00:0 0x10de 0x0402 AGP nvidia
(I chose these because they have no fans and when working from home, quiet is nice to have!)
The following options are recommended to run compiz with NVIDIA and I have enabled them all at one point. However, looking through carefully I don't need to since using the latest drivers and having pretty good video cards all this seems to be (according to the documentation) automatically enabled.
[Code]...
View 4 Replies
View Related
Apr 2, 2010
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
View 14 Replies
View Related
Jul 7, 2011
I`ve problem with my microphone on fedora 14 with Gnome 2. When i try to use alsamixer command there everything is ok. I tried pulseaudio and HDA nvidia sound cards, but microphone don`t work. How to fix this problem?
View 11 Replies
View Related
Jan 30, 2011
Recently installed Slackware, and now trying to get my two monitors working nicely. After much hair-tearing I've got Xinerama set up so that each monitor displays separate information.I'm using an nVidia 9800 GT dual-headed graphics card. This is my xorg.conf file:
Code:
Section "ServerFlags"
Option "Xinerama" "ON"
EndSection
[code]....
then the mouse is stuck on the right screen. It seems to recognise that the physical right monitor is the virtual right monitor, but if you try to move off the left side of the screen, it appears on the right side of the same screen. This seems to be similar to the bug described here, but that's meant to be fixed in v1.2.3 and I have v1.5.0 (according to pkgtool). I have also considered physically swapping the monitors, but then I would have to edit all the other OSes I use to know about the change, and also on principle I feel I should work out why it's not working...
View 2 Replies
View Related
Nov 29, 2009
On openSUSE 11.1 I was able to configure KDE 4 for 2 monitors with sax2 (although the resolution was bad).On 11.2 neither SAX2 nor KRandR seem to work. The KDE User Guide says that a driver supporting version 1.2 is necessary. However the nvidia driver for eForce FX Go5200 seems to support only version 1.1.Is there a way to use both monitors with SUSE 11.2? I am quite desperate since for my work using only 1 monitor is definitely a handicap.
View 5 Replies
View Related
Jan 10, 2010
I would like to adjust Xinerama to place 1 desktop on each of my 2 monitors and not stretch a single over both. With the current set up there is a problem with window placement upon opening new widows or context dialog boxes. I realize that I could adjust placement properties and select window placement with the mouse but this is still lacking in productivity. My monitors are not next to on another so this is more of a problem than it seems.
View 4 Replies
View Related
Mar 24, 2011
I'm trying to set up a tri monitor setup. Unfortunately I must use 2 cards, one an AMD HD4350 and a PCI Geforce FX200. (Old skool I know) Due to the restrictions, I am forced to use the open source drivers (else nvidia glx will clash).
1: Use XRANDR to span the displays (this is what I did previous to the introduction of the third monitor and nvidia card to my system) I tried to do this, by setting up a second X screen on the NVIDIA card, disabling Xinerama; but after much googling I can't figure out the syntax for panning across 2 screens (X screens) in XRANDR, even tho it's >1.3, which supposedly supports multi card output.
2:Use Xinerama, sacrificing randr, and composite extensions. I also attempted to do this, with some limited success. I could get the NVIDIA screen to be right of the ATI, but I couldn't get 2 independent outputs running on the ATI card, even with "ZapohHeads" appended to one of the device sections for my ATI card.
View 1 Replies
View Related
Jan 5, 2010
I'm really desperate here, I have an Alienware M17X laptop with dual Nvidia GTX280M video cards, Ubuntu 9.10 64-bit kernel - 2.6.31-16-generic. The installation was smooth excluding the video cards. I tried installing the drivers through the Hardware Drivers (the easy way) added this: http://ppa.launchpad.net/nvidia-vdpau/ppa/ubuntu to the list of repositories and got the following drivers available: 173,180,185,190,195(recommended). So I tried them all (did 4 re-installs already) with a very poor result - the cards are detected and the drivers were installed ok, but the performance is really a no-go. I'm not even talking about the SLI yet. Just trying to make one card work as it should. What I get is 136FPS in phoronix lightsmark test at 19020x1200 rez. The card should perform 4x from what it does (I know it because the phoronix team did it with a Clevo laptop with single GTX280M card and the older 185.x driver). Also I noticed that the Nvidia X-server shows my cards as PCI 8X instead of 16X, so I think it's a driver issue. So right now I'm trying to install the same driver phoronix used and have some trouble: in the process the installer says it needs to compile the Nvidia driver kernel and is unable to do so, so it fails. What am I missing here? Do I need some prerequisites to be installed prior doing it?
P.S> Part of lspci output:
02:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280M] (rev a2)
03:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280M] (rev a2)
As you can see the cards are detected.
View 2 Replies
View Related
Sep 10, 2011
i just upgraded my pc to 12.1 milestone 5 when i went to play my fav game (Xonotic) it was all laggy at 1 fps. I realised the graphics card app wasnt working anymore.Can any 1 fix PS and i had to go on failsafe too. PS2 milestone 5 workes flawlessly apart from the gnome 3 bug at startup
View 2 Replies
View Related
Mar 3, 2010
I am running Ubuntu 9.10. My work requires me to frequently swap video cards between an ATI Radeon 5870 card and an NVIDIA GeForce 8800 GTX card. My question is: can the ATI driver (fglrx - catalyst 10.2) and the NVIDIA driver (nvidia 190.29) co-exist? Or do I need to reinstall the driver every time I change the card? I would like for the drivers to be able to co-exist so it would only be a matter of restarting my machine with the new card and choose the right xorg.conf file (perhaps from the GRUB menu).
View 9 Replies
View Related
Apr 29, 2011
Did an upgrade to Natty - on first boot, when I log in, it tells me I don't have the hardware to run Unity (not likely - it's an NVidia GTX460, not even a year old). I assume it's a driver problem, so I install the restricted NVidia binary drivers through jockey. That's the ubuntu way, I figure, let it do its thing. So with those enabled, I have 3d acceleration (hi, World of Warcraft!) but still no Unity. I blow away .gconf* and .gnome* (as I'm used to doing whenever something gnome-related goes wonky which, in Ubuntu, seems to be every single Ubuntu release) and absolutely no love. I log in and again, it tells me I don't have the hardware. I scoff at this dialog box as I fire up WoW and frag some orcs in glorious 3d. No, Mr. Dialog box, you're a filthy liar. How do I coax Unity into running on this thing? Or does it just... not? Switching to Nouveau isn't an option, as I need my games (and anyway, I don't think it was even in use originally).
View 9 Replies
View Related
Mar 29, 2010
I have 2 NVidia graphics cards, a GTX275 and a GT210. My system boots just fine in 32-bit Windows 7, so I know it isn't a hardware problem.Linux boots fine with either the GTX275 or the GT210 installed, but hangs after the file system check if both are installed. My motherboard has 3 pci-e slots, an x1, x4, and an x16. I've tried various configurations, all fail except 1 graphics card installed in either of these slots. I got my system to boot a couple of times with both cards installed in Xbuntu 9.10. Then this problem randomly happened.
System Specs:
Ubuntu 10.04 Beta, 2.6.32-16 Kernel
MSI N275GTX Twin-Frozr 896MB
MSI N210GT 512MB (got it for VDPAU on an HDTV )[code].....
I'm not inclined to believe the problem is here. I don't even get a bootsplash, let alone XServer to start. The system hangs after a flurry of HDD activity. Checked partition, and it's ok.
/var/log/boot.log
Code:
fsck from util-linux-ng 2.17.2
/sbin/fsck.xfs: XFS file system.
View 4 Replies
View Related
Apr 11, 2010
After a PSU and motherboard failure, I'm about to spec out a new PC. The last time I looked, Nvidia was the preferred graphics chipset as they tended to support Linux better than ATI. Is this still the case?[url].... seem to have lots of ATI cards in stock but hardly any Nvidia (despite offering a similar sized range), but I don't want to get an ATI card if it's not preferred for technological reasons (or even FOSS ethical reasons!).
View 9 Replies
View Related
Sep 29, 2010
I have seen several posts on various message boards that touch on the no sound over hdmi on nvidia cards issue (mine is an 8400 gs) and the general consensus seems to be create a custom edid and tell x to use it. So here is the heart of the post: I downloaded http://analogbit.com/sites/default/file /edid_disable_exts_v1.2.tgz to modify my edid but I don't know what to do with it. I extracted it and tried $ make and $ sudo make install But that wasn't the ticket,
View 1 Replies
View Related
Dec 27, 2009
From what I've read there is no problem running one nvidia card on a crossfire motherboard, but not much information running two cards.Some context: I currently have a Core 2 Duo on a motherboard with an nForce chipset supporting SLI. I have 2 nVidia 9400 graphics cards not in SLI mode driving my 3 monitors.I'm toying with the idea of upgrading the CPU and motherboard (maybe the RAM if I go for DDR3), and am leaning (back) towards the AMD camp, however most of the motherboards for AMD CPUs that have 2 PCIe x16 slots also have Crossfire.
View 4 Replies
View Related
Jul 15, 2010
Like a guy earlier today report a problem with Opensuse 11.2 working fine on his machine but 11.3 is not. I have somewhat the same problem. The default installation freezes randomly. I have seen this error before with Intel video cards but never with NVIDIA. Right now, I'm using VESA in failsafe mode and trying to install some drivers from this repo.
I'll try and find a fix for this. (Hope their is one)BTW, can anyone confirm when the official drivers for NVIDIA cards are coming out?
View 8 Replies
View Related
Mar 17, 2011
I am finding a lot of issues with flash in 11.4 release. As I know it is flash issue, because some people after updating flash on 11.3 got the same problem.
Flash seams to be crashing or/and slowing down web browser. After trying to figure out where is the problem, i found that:
1) removing SLI helped a little bit
2) updating to beta (270) nvidia drivers helped a little bit (moving window with flash animation from one screen to another one that is connected to different graphic card does not crash the browser anymore)
But still the problem exists.
For example, sometimes when i minimize the window with flash animation and i open new window (e.g. with spreadsheet) and move it on the same place where was previous window with flash, I can see this flash animation as a background of the new window....
Also, when i am moving the window with flash around, the flash disappears or gets gray.
Sometimes, ..... does not load the movie, but if i open the movie in VM windows, it works fine. After reloading Xwindows it works for a while also in opensuse.
View 4 Replies
View Related
Oct 10, 2010
Compiz works out of the box in Live systems when run on computers with integrated Intel graphics chips.Is there a way to make it work on system with Nvidia or ATI chips? Even if I have persistence enabled, downloading and installing the drivers does not carry over to the next session and it again throws up a "restricted drivers available/needed" prompt.P.S The purpose of doing this is for demos. Plugging in a live system and letting people play with whizbang effects is the best way to convert them
View 9 Replies
View Related
Apr 8, 2011
As described in further detail below I am looking for some help in Ubuntu 10.10 with a multi-monitor + multi-gpu setup using both ATI and Nvidia video cards installed within the same system (que scoffs and jeers). Is it possible to sucessfully run both ATI and NVidia GPU's and Drivers simultaneously in Ubuntu 10.10 (think multi-monitor environment)? I am asking b/c I am having trouble figuring out how to manage my video cards - particularly ATI - within a multi-monitor + multi-gpu video card environment.
Here's the setup:
Ubuntu 10.10 Maverick Meerkat
x2 - NVidia 6800XT SLi GPU's + 2 DVI outputs/per card (Serviceable card for my needs)
x1 - ATI Rage XL PCI Card + 1 VGA output (Yes, ancient hardware...I know)
[code]....
View 4 Replies
View Related
Oct 27, 2009
So I installed openSUSE 11.1, and got everything from yast2 and then finally got nvidia.ymp or whatever. Bascially, the one click install. When i did that, I couldn't boot into the SUSE GUI. I could boot into the command line but I couldn't start X server.When I did try the Ec2-openSUSE-2.62.27.9 option, I get grub error 13. It says that the ex2fs file system is not supported, only I did not format it with ext2. I am completely stumped and I'm a newbie.
View 3 Replies
View Related
Jan 9, 2011
I just replaced the ATI videocard by a NVIDIA GT430 videocard on my Slackware64 13.1 htpc and cant get the card to be detected by alsa so I have no sound through HDMI. Only the onboard devices are detected. Alsaconf does not see the card and the Kmix application does not see it either. Only lspci & cat /proc/asound/cards see it but seems not able to use it...I am using the stock slack64 13.1 kernel 2.6.33.4 and I've recompiled alsa from sources to version 1.0.23. What do I need to do to get this to work??aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: pcsp [pcsp], device 0: pcspeaker [pcsp]
[code]....
View 3 Replies
View Related
May 6, 2010
I recently upgraded to Lucid from Karmic and shortly before the release upgraded from a geforce 8400gs to my geforce GT240 and noticed no difference on Karmic. I read somewhere that the capability of video cards would be applied further with Lucid. Since installing Lucid I've noticed a severely reduced sharpness and severely increased contrast, changing the contrast in X server has no effect. My hardware driver is activated but not in use and no online fix I've attempted has been successful in resolving the issue. Is it possible to use a gt240 on lucid with no hassle and is there any way I can maximize my video cards capabilities?
View 2 Replies
View Related
May 19, 2011
here's what I want:
Fedora 14
Radeon 5830
2 monitors(one 1920x1080, one 1920x1200) -- shared screen
Compiz
Gnome
It seems like you cannot run Compiz and Xinerama at the same time(correct?) So the solution is then to use XRandR right? I configured my xorg.conf using aticonfig --initial=dual-head. When I do that and reboot, everything works fine and Compiz is enabled! Hooray! But wait, there is a separate screen on each monitor and I can't drag windows between them. So I open amdcccle and change the monitors to share a screen(single desktop, multi monitor) and reboot... and my left monitor looks fine but the right monitor(the 1920x1200 one) looks corrupted. Strange text composited over, weird flickering, etc. I can't see the login prompt to type my password due to the corruption.
View 1 Replies
View Related
Jun 6, 2010
I am trying to use three monitors with two video cards on Fedora 13:
$ lspci | grep -i vidia
07:00.0 VGA compatible controller: nVidia Corporation NV41 [Quadro FX 3450/4000 SDI] (rev a2)
0c:02.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1)
$
The Quadro dual-card has no problem driving two 19" monitors, but the GeForce will not wake the third 17" monitor from power save mode. The BIOS indicates that the Quadro is the primary card. I am trying to use Xinerama to activate the GeForce. So far I have only seen the GeForce and 17" monitor work if the Quadro is physically removed. In all cases I have been using nouveau. I'll attach my xorg.conf, Xorg.0.log, and smoltprofile.txt. My xorg.conf shows two monitors: monitor0 (19") and monitor1 (17"). monitor0 is actually two identical monitors which the quadro treats as one large monitor.
View 2 Replies
View Related
Dec 1, 2010
I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?
View 1 Replies
View Related
