Fedora :: F11 To F12 Doesn't Seem To Like Legacy Nvidia Cards?
Nov 18, 2009
Greets all and congrats on the developers on bringing us another great version of Fedora. My box has an Nvidia GForce4 MMX 440 SE 64MB SDRam. I downloaded and updated from F11 to F12 last night. Before I went to bed It booted to a blank screen, GDM didn't want to start. I decided to investigate in the morning and went to bed. The first problem I found was that the F11 Legacy Nvidia Drivers were causing a problem, so I had to remove those. I also did an update with yum to get everything 100% updated. Then rebooted, more problems. GDM did NOT want to start for anything. More investigating found that the culprit was this nouveau kernel mod. Well, I had the xorg nouveau driver installed and I thought that this might be one in the same so I removed the xorg one with no avail, the nouveau kernal mod still loading. Seems that they are different and one is used for the xorg server and the other is used for the framebuffer console. I had to pass nouveau.modset=0 to the kernel at boot time to rid myself of the framebuffer. GDM starts now and I have resinstalled the xorg Nvidia nouveau driver though I have not tested it as of yet. Is there a better way at disabling the framebuffer boot up then by passing things to the kernel?
Edit: I take all that back. Upon further tinkering, reading, and investigation. The problem seems to be two fold: 1) The legacy nvidia drivers pissed and moaned about permission so I removed them. 2). This one I over looked and was causing me most of my grief. I didn't change the xorg.conf video driver from nv to nouveau. I did this and it works fine now. It seems that the "Linva-config-display" And I am sorry that I do not know exactly what this is at the moment. But this would automatically change the video driver from nvidia to nv if I manually changed it in the xorg.conf file after I removed the nvidia drivers. So I ASSUMED(my big mistake) that it would automatically see the nouveau driver and replace the nv with that. I was very wrong. After I added it manually, I rebooted and it runs fine now.
I can't get the Nvidia legacy drivers running. I've the following packages, which are the right ones for my kernel:
Quote:
and I added nouveau to /etc/modprobe.d/blacklist.conf and created a new mkinitrd which boots. But the X11 window system doesn't start up, so I checked if nouveau is loaded and it's really blacklisted. When I manually modprobe nvidia kernel driver I get the following error:
Quote:
FATAL: Error inserting nvidia (/lib/modules/2.6.30.8-64.fc11.i686.PAE/extra/nvidia/nvidia.ko): No such device
and some warnings from the module that 185.18.36 doesn't support my CPU.
My video card is:
Quote:
Try to figure this out for two days now. Rpmfusion is really frustrating for me
Adding vmalloc=256m to the kernel parameters and Option "ConstantFrameRateHint" "True" in xorg.conf also didn't help.
I have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
I've got a Dell Xeon with two video cards - an nVidia Quadro2 MXR/EX/Go and an ATI Radeon 7000/VE. Under Fedora 10 Xinerama worked just fine, but I recently upgraded to F14 and Xinerama no longer works.The X server tries repeatedly to start but fails, with gdm-binary eventually giving up in disgust. If I comment out the ''Option "Xinerama" "On"' line it starts up (see attached xorg.conf), albeit with a few quirks. I have two X screens (:0.0 and :0.1 - one for each monitor), where :0.0 works just fine but :0.1 has no window manager - I can bring up windows on it but they have no window border ( no min/max/close buttons, can't be resized, etc). The mouse moves freely from one monitor to the other, but windows don't.The error messages I get when I try to use Xinerama are as follows. In /var/log/messages I get:
Mar 10 10:32:41 valdez kernel: [60328.892005] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 Mar 10 10:32:41 valdez kernel: [60328.892477] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 Mar 10 10:32:41 valdez kernel: [60328.907615] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1 Mar 10 10:32:41 valdez gdm-binary[21435]: WARNING: GdmDisplay: display lasted 0.457045 seconds
[code]....
I've tinkered around with xrandr a bit but have had no luck - mostly the screen flickers briefly and things continue on as they were before.
Due to the miss of proprietary drivers from AMD for Fedora 12, I have installed a second video card in my system (a Nvidia one) for BOINC calculation. This card is not connected to a monitor.
So in the system I have this two cards: ATI Shappire Radeon HD2600XT (256MB) Asus Nvidia Geoforce 6600 (356MB)
The ATI is in the first PCI express device, the Nvidia to the second PCI express:
Code:
So I have used this Xorg configuration file (if I let Xorg to configure without the configuration file, it sets NVidia to default card and X files to start):
Code:
The Nvidia driver were installed as described in some forum:
1) disabling nouveau in grub configuration
Code:
2) Take SElinux to alow the driver:
Quote:
With this, the driver is correctly loaded in memory:
Code:
But the Xorg says that not Nvidia Driver where found (see the attack file).
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
I`ve problem with my microphone on fedora 14 with Gnome 2. When i try to use alsamixer command there everything is ok. I tried pulseaudio and HDA nvidia sound cards, but microphone don`t work. How to fix this problem?
I recently updated my Debian Jessie and somehow that update broke my Debian. I have a Gtx 465 and this has been working fine under Jessie for a year.
After the update I no longer have X running. I tried removing all the Nvida stuff and reinstalling 304-legacy which did not get the Xserver back. I also tried to install Nvidia 304 driver binary but this time it refuses to compile ;( So I am out of luck at the moment.
I am runing Jessie Linux 3.18 Nvidia 465 Gtx Intel Cpu
Code: Select all built-ins [ 41.306] (==) ModulePath set to "/usr/lib/xorg/modules" [ 41.306] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 41.306] (II) Loader magic: 0x7ff757496d80
Does anyone know when or if the nvidia legacy drivers are going into Squeeze? I tried the ones in the Sid repos but ran into unresolvable dependencies. Lots of people were telling me that testing works just fine so I've been trying it out, but to be honest I've run into quite a few problems of this nature. I admit that I'm running a real Rube Goldberg mix of older and newer hardware on this box, but I wouldn't think it would be this much of a problem.
i tried installing the driver through the one click install (SDB:NVIDIA drivers - openSUSE) and through zipper, but system info says that the display driver is nouveau. here are my specs
Got a Gforce4 Ti 4400 graphics card. After installing 10.10 everything works but not optimal: I cannot choose any visual effects under appearances. I don't have a NVIDIA menu. Can't use any of the features. When looking in the 'additional drivers' section, nothing shows up. Looking at some threads, I tried what is described in: p {margin-bottom: 0.08in;} [URL]
However, the result is crap. As described further down that thread, my screen goes to crap. So, re-installed everything again and I am now wondering if I should just give up. Not my nature though so here is my question: My card is supported with the Legacy NVIDIA driver: 96.43.xx driver Latest version on their website: Version: 96.43.19 Certified Release Date: 2010.11.16 Operating System: Linux Language: English (U.S.) File Size: 15.7 MB
This file is a .bin file. So what should I do. I read something like if you don't use something from the repository you have to re-install it every time Ubuntu's kernel is updated. However, does the driver in the repository support my legacy card. Is it wise to install the certified driver and how do I do that?
I've currently got the beta of fedora 12 installed, hope to upgrade that once the final release comes out. I'm having so many problems getting wireless to work. I've got a edimax ew-7711utn wireless adaptor. It doesn't work. Really what I want is to take it back and get a wireless card that will work.
I recently installed the Nvidia proprietary drivers and I have a problem starting gdm. Xserver fails, only throwing a warning concerned to xkbcomp, something about ralt having two symbols... but just a warning anyway. Then, after waiting the screen flash between the tty and a black screen a few times;
i'm on the tty, from where I can "startx" without problem. I tried using the nv driver and gdm worked.. so i think it has relation with the nvidia drivers... If I start gdm from the tty, instead of using the startx command, then gdm appears but if I try to log in.. all freezes up.. Here's my xorg.conf generated by nvidia-xconfig: [URL]
I'm running a Geforce FX 5900 Ultra with nvidias 173.14.27 driver. I'm running slackware 13.1 with kernel 2.6.35.5.
I get a horrible slowdown which is noticeable in emulators such as bsnes and kega fusion. I also think it's responsible for other issues that involve zsnes flickering like mad and hanging. Zsnes will actually crash if I select any filter plugins with opengl output modes.
Kega Fusion slows down to a crawl (we're talking 10 fps) immediately before loading a rom. Playing a rom makes it even slower.
Bsnes has the same kinda slowdown as kega fusion (even worse since it's so cpu intensive) when I activate scanlines or any type of output filter with opengl. Otherwise with no filters and just plain opengl it seems to run fast like it should...
Gens-GS doesn't seem to enable any filters in fullscreen mode... They work however in windowed mode with no slowdown issues...
I've compiled and installed SDL 1.3 from hg repository, then recompiled bsnes just to test it with newer SDL. Unfortunately the problem persists even with a newer SDL version which thankfully for me means I can revert to the older stock SDL without having to recompile everything else haha!
It's funny because I thought these issues were related to the emulators and not the video card drivers. I had these issues for a couple years running ubuntu and trying other distros. When I installed Slackware 13.1 I decided to try my Radeon 9700 pro and kega fusion no longer had this slowdown issue! I switched back to my Geforce and installed nvidia's drivers and immediately had slowdown issues... I'm gonna switch back to the radeon card and test the other emulators but otherwise it'd be nice to know if there's a solution to this issue...
Ok I installed my radeon card: nvidia-installer --uninstall, then updated xf86-video-ati from 6.13.0 to 6.13.2. Even though kega fusion runs fine I get even worse problems with everything else! LOL so I'm going back to my geforce card.
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
I have an ATI Radeon 9200 AGP card. I plan to upgrade it mainly because the 2D performance in KDE (3.x without Beryl or Compiz) is just bad. Since we are talking about a relatively old desktop, I do not want to completely upgrade it. So, I want to just upgrade the VGA card. I have found the following cards: Nvidia GeForce 6200
Radeon HD 2400 Pro Radeon X1600 Pro Avivo Edition
Now, the simple question: Their prices are just OK (just a couple of � separate them). Which chip is better? And which chip is better supported from our beloved distro?
I'm really desperate here, I have an Alienware M17X laptop with dual Nvidia GTX280M video cards, Ubuntu 9.10 64-bit kernel - 2.6.31-16-generic. The installation was smooth excluding the video cards. I tried installing the drivers through the Hardware Drivers (the easy way) added this: http://ppa.launchpad.net/nvidia-vdpau/ppa/ubuntu to the list of repositories and got the following drivers available: 173,180,185,190,195(recommended). So I tried them all (did 4 re-installs already) with a very poor result - the cards are detected and the drivers were installed ok, but the performance is really a no-go. I'm not even talking about the SLI yet. Just trying to make one card work as it should. What I get is 136FPS in phoronix lightsmark test at 19020x1200 rez. The card should perform 4x from what it does (I know it because the phoronix team did it with a Clevo laptop with single GTX280M card and the older 185.x driver). Also I noticed that the Nvidia X-server shows my cards as PCI 8X instead of 16X, so I think it's a driver issue. So right now I'm trying to install the same driver phoronix used and have some trouble: in the process the installer says it needs to compile the Nvidia driver kernel and is unable to do so, so it fails. What am I missing here? Do I need some prerequisites to be installed prior doing it?
i just upgraded my pc to 12.1 milestone 5 when i went to play my fav game (Xonotic) it was all laggy at 1 fps. I realised the graphics card app wasnt working anymore.Can any 1 fix PS and i had to go on failsafe too. PS2 milestone 5 workes flawlessly apart from the gnome 3 bug at startup
I am running Ubuntu 9.10. My work requires me to frequently swap video cards between an ATI Radeon 5870 card and an NVIDIA GeForce 8800 GTX card. My question is: can the ATI driver (fglrx - catalyst 10.2) and the NVIDIA driver (nvidia 190.29) co-exist? Or do I need to reinstall the driver every time I change the card? I would like for the drivers to be able to co-exist so it would only be a matter of restarting my machine with the new card and choose the right xorg.conf file (perhaps from the GRUB menu).
Did an upgrade to Natty - on first boot, when I log in, it tells me I don't have the hardware to run Unity (not likely - it's an NVidia GTX460, not even a year old). I assume it's a driver problem, so I install the restricted NVidia binary drivers through jockey. That's the ubuntu way, I figure, let it do its thing. So with those enabled, I have 3d acceleration (hi, World of Warcraft!) but still no Unity. I blow away .gconf* and .gnome* (as I'm used to doing whenever something gnome-related goes wonky which, in Ubuntu, seems to be every single Ubuntu release) and absolutely no love. I log in and again, it tells me I don't have the hardware. I scoff at this dialog box as I fire up WoW and frag some orcs in glorious 3d. No, Mr. Dialog box, you're a filthy liar. How do I coax Unity into running on this thing? Or does it just... not? Switching to Nouveau isn't an option, as I need my games (and anyway, I don't think it was even in use originally).
I have 2 NVidia graphics cards, a GTX275 and a GT210. My system boots just fine in 32-bit Windows 7, so I know it isn't a hardware problem.Linux boots fine with either the GTX275 or the GT210 installed, but hangs after the file system check if both are installed. My motherboard has 3 pci-e slots, an x1, x4, and an x16. I've tried various configurations, all fail except 1 graphics card installed in either of these slots. I got my system to boot a couple of times with both cards installed in Xbuntu 9.10. Then this problem randomly happened.
System Specs: Ubuntu 10.04 Beta, 2.6.32-16 Kernel MSI N275GTX Twin-Frozr 896MB MSI N210GT 512MB (got it for VDPAU on an HDTV )[code].....
I'm not inclined to believe the problem is here. I don't even get a bootsplash, let alone XServer to start. The system hangs after a flurry of HDD activity. Checked partition, and it's ok.
/var/log/boot.log
Code: fsck from util-linux-ng 2.17.2 /sbin/fsck.xfs: XFS file system.
After a PSU and motherboard failure, I'm about to spec out a new PC. The last time I looked, Nvidia was the preferred graphics chipset as they tended to support Linux better than ATI. Is this still the case?[url].... seem to have lots of ATI cards in stock but hardly any Nvidia (despite offering a similar sized range), but I don't want to get an ATI card if it's not preferred for technological reasons (or even FOSS ethical reasons!).
I have seen several posts on various message boards that touch on the no sound over hdmi on nvidia cards issue (mine is an 8400 gs) and the general consensus seems to be create a custom edid and tell x to use it. So here is the heart of the post: I downloaded http://analogbit.com/sites/default/file /edid_disable_exts_v1.2.tgz to modify my edid but I don't know what to do with it. I extracted it and tried $ make and $ sudo make install But that wasn't the ticket,
From what I've read there is no problem running one nvidia card on a crossfire motherboard, but not much information running two cards.Some context: I currently have a Core 2 Duo on a motherboard with an nForce chipset supporting SLI. I have 2 nVidia 9400 graphics cards not in SLI mode driving my 3 monitors.I'm toying with the idea of upgrading the CPU and motherboard (maybe the RAM if I go for DDR3), and am leaning (back) towards the AMD camp, however most of the motherboards for AMD CPUs that have 2 PCIe x16 slots also have Crossfire.
Like a guy earlier today report a problem with Opensuse 11.2 working fine on his machine but 11.3 is not. I have somewhat the same problem. The default installation freezes randomly. I have seen this error before with Intel video cards but never with NVIDIA. Right now, I'm using VESA in failsafe mode and trying to install some drivers from this repo.
I'll try and find a fix for this. (Hope their is one)BTW, can anyone confirm when the official drivers for NVIDIA cards are coming out?
I am finding a lot of issues with flash in 11.4 release. As I know it is flash issue, because some people after updating flash on 11.3 got the same problem.
Flash seams to be crashing or/and slowing down web browser. After trying to figure out where is the problem, i found that: 1) removing SLI helped a little bit 2) updating to beta (270) nvidia drivers helped a little bit (moving window with flash animation from one screen to another one that is connected to different graphic card does not crash the browser anymore)
But still the problem exists.
For example, sometimes when i minimize the window with flash animation and i open new window (e.g. with spreadsheet) and move it on the same place where was previous window with flash, I can see this flash animation as a background of the new window....
Also, when i am moving the window with flash around, the flash disappears or gets gray.
Sometimes, ..... does not load the movie, but if i open the movie in VM windows, it works fine. After reloading Xwindows it works for a while also in opensuse.
Compiz works out of the box in Live systems when run on computers with integrated Intel graphics chips.Is there a way to make it work on system with Nvidia or ATI chips? Even if I have persistence enabled, downloading and installing the drivers does not carry over to the next session and it again throws up a "restricted drivers available/needed" prompt.P.S The purpose of doing this is for demos. Plugging in a live system and letting people play with whizbang effects is the best way to convert them
As described in further detail below I am looking for some help in Ubuntu 10.10 with a multi-monitor + multi-gpu setup using both ATI and Nvidia video cards installed within the same system (que scoffs and jeers). Is it possible to sucessfully run both ATI and NVidia GPU's and Drivers simultaneously in Ubuntu 10.10 (think multi-monitor environment)? I am asking b/c I am having trouble figuring out how to manage my video cards - particularly ATI - within a multi-monitor + multi-gpu video card environment.
Here's the setup:
Ubuntu 10.10 Maverick Meerkat x2 - NVidia 6800XT SLi GPU's + 2 DVI outputs/per card (Serviceable card for my needs) x1 - ATI Rage XL PCI Card + 1 VGA output (Yes, ancient hardware...I know)
So I installed openSUSE 11.1, and got everything from yast2 and then finally got nvidia.ymp or whatever. Bascially, the one click install. When i did that, I couldn't boot into the SUSE GUI. I could boot into the command line but I couldn't start X server.When I did try the Ec2-openSUSE-2.62.27.9 option, I get grub error 13. It says that the ex2fs file system is not supported, only I did not format it with ext2. I am completely stumped and I'm a newbie.
I just replaced the ATI videocard by a NVIDIA GT430 videocard on my Slackware64 13.1 htpc and cant get the card to be detected by alsa so I have no sound through HDMI. Only the onboard devices are detected. Alsaconf does not see the card and the Kmix application does not see it either. Only lspci & cat /proc/asound/cards see it but seems not able to use it...I am using the stock slack64 13.1 kernel 2.6.33.4 and I've recompiled alsa from sources to version 1.0.23. What do I need to do to get this to work??aplay -l
Code: **** List of PLAYBACK Hardware Devices **** card 0: pcsp [pcsp], device 0: pcspeaker [pcsp]
