OpenSUSE Hardware :: Unable To Get The Device To Scan For Remote Devices?
Sep 14, 2010
I have the above bt dongle and I am unable to get the device to scan for remote devices. The dongle and bluetooth software is recognized and from a system point of view is working. Using Suse 11.3 64bits
[Code]...
When I scan the blue led comes on solid and goes back to blinking afterwords but nothing is found. I did try another adapter and the bluetooth worked. BTW The Bluedevel application is real nice and works much better then the kdebluetooth app,
View 1 Replies
ADVERTISEMENT
Apr 1, 2011
I am trying to write a script to modify /etc/fstab that will add entries for a number of partitions on different disks.
The only thing that I do not know how to do is to obtain a unique id such as the ones in /dev/disk/by-id/ to address by from a given partition (ie /dev/sdb1). In my fstab I noticed that in installation the system added fstab entries that are unique (in /dev/disk/by-id/)
I could simply do /dev/sdb1 and so on, but I would prefer a unique identifier so that each mount point is tied to a partition on a specific and unique physical drive.
i need this to be script-able if possible, if not I would still like to know.
View 3 Replies
View Related
Apr 7, 2011
To use my home broadband, I am connected to a wireless router. How can I scan for other devices connected to that router? I am using Ubuntu 10.10.Is there both a GUI and CLI method?The IP of my router is URL... Please rename this thread title from 'How can I scan for other devices connected to that router?' to 'How can I scan for other devices connected to my router?
View 4 Replies
View Related
May 12, 2011
I am using Ubuntu, now installed KDE (kubuntu) and I have Bluetooth working and enabled but for some strange reason the bluetooth scan is not finding any devices in spite of the fact that I have my mobile phone with bluetooth on and discoverable. My laptop is HP Touchsmart tm2 2102tu. Here's output of my hciconfig -a
BD Address: 70:F3:95:74:7D:CE ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:1099 acl:0 sco:0 events:42 errors:0
[code]....
Neither hcitool scan nor scanning with Gnome or KDE bluetooth settings is working for me.
View 9 Replies
View Related
Feb 19, 2010
Previously, everytime I insert a USB drive it automatically mounts. But now I am getting this error:
"Unable to mount 8.0 GB Media DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Also, previously my CD/DVD works properly. But now everytime I insert a disk, this is what I get:
"Unable to mount TOSHIBA
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
By the way, I am using openSUSE 11.1.
View 9 Replies
View Related
Jan 26, 2010
I just bought an hp 6500 wireless printer, and after taking 5 minutes to set it up (amazing how easy it is to get hardware working that supported by Linux) I was happily printing...But- I haven't managed to get it to scan from my desktop pc running 9.04. Tells me no device is found. I added the printer to a laptop running 9.10, and it scanned perfectly straight away...
I've been through the Ubuntu help documentation and haven't found a solution.I think that maybe Turbo Print (for our old Canon printer) might have messed something up. I had to uninstall Turbo Print to get the printer to work (it hijacked Ubuntu's built in printing stuff).
View 2 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
May 1, 2010
The one thing that has stopped me switching over to Ubuntu was getting my scanner to work. I finally resolved this issue. Here are the set I followed to get it working. When trying to scan with XSane I would get the device not found alert. Using the sane-find-scanner command would find the scanner as a USB device. found USB scanner (vendor=0x04b8, product=0x0851) at libusb:001:006 I amended the "rules" file for xsane /lib/udev/rules.d/40-libsane.rules added the two following lines
[code]...
Now I have a fully working colour scanner, bye bye windows
View 6 Replies
View Related
Oct 17, 2010
Recently, I bought the HP Officejet 4500 especially because of the automatic feeder for the scanner. The device is not supported by Fedora, but I found the driver for it at the HP driver site for Fedora 11 and / or 12.Now, I have two questions. First, I wonder why these drivers are not part of a Fedora distribution yet. Is there still some issue with it going on (something related to my second question or something completely different)?Second, the software (Sane) doesn't recognize different sheets of paper. When I place some 20 sheets of paper in the automatic feeder, the scanner scans them all, but only the first sheet is processed by Sane.Now, I saw that Sane in Fedora 13 is different than in Fedora 11 or 12. I expect it is improved, but I have not been able to work with it yet. Can I expect that it does recognize different sheets of paper from a scan with an automatic feeder?
View 2 Replies
View Related
Jan 9, 2011
I have installed a new network multifunctional device Samsung CLX-3185FN using the drivers provided by the manufacturer (Samsung Unified Driver). The printing over the network works fine, I can administer the device using browser. The only problem I have is using scanner over the network. It works fine if I disable firewall, but is blocked with firewall enabled. I can not figure out which ports or port-range I must enable for this scanner. Do you have any information on this one or how can I found out the necessary ports to open?
View 3 Replies
View Related
May 11, 2010
I am not able to connect to the Remote VNC Server..Error: ConnectToTcpAddr: connect: Connection refused.
View 6 Replies
View Related
Jan 22, 2011
I was wondering if you can 'share' devices in Linux by overlaying the devices nodes? For instance, is it possible to use SSH (FS) + bind to selectively bind devices locally?
View 1 Replies
View Related
May 12, 2011
I'm looking to convert my HTPC into a remote android dev server for my girlfriend and myself, however I want to make sure that it is possible to do what I am looking to do.Is it possible to map local devices to the VNC server (such as an android phone) so that we can work on development over VNC with phones we have on our client computers? I know its a trivial matter to map local drives over VNC, but what about non-HD devices, can I still maintain full functionality as if the device itself was plugged directly into the server?'ll be installing ubuntu again this weekend, never got around to it after my last HD failure.
View 1 Replies
View Related
Aug 12, 2010
The geek-in-me won and I bought a spiffy little Acer Aspire One netbook, windows 7 starter installed. Now I take it to clients' workplaces instead of my 19" laptop (that I also bought because the geek-in-me won that time too).
So what do I install in the Suse/openSUSE range? I want a lightweight Linux, like Meego or openSUSE with a light Desktop. I need to be able to use remote connections like RDP and VNC to both Linux and windows machines, so maybe Meego can't do that? But maybe openSUSE with a very light Desktop will. I'll use gmail from the netbook, no need for Thunderbird etc. I like to have multimedia.
View 9 Replies
View Related
May 20, 2011
I finally installed openSUSE along side ubuntu and xp in my ThinkPad EDGENow I am facing issue with toggling the wi-fi, I had no such problem in ubuntu.Seems like there is some issue in the thinkpad-acpi module.I use fn+F9 to toggle the wifi, which toggles both bluetooh and wifi, but on openSUSE it only toggles bluetooth.acpi_listen in ubuntu gives me the below result when I press fn+F9ibm/hotkey HKEY 00000080 00001005but in openSUSE its blank but bluetooth gets toggled. dmesg from ubuntu:
Code:
$ dmesg | grep acpi
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[code]...
View 5 Replies
View Related
Jan 11, 2010
the remote printer appears in cups but if I try to do a test page i get a page not found error. it even says ready under yast printers.it is set up on a remote desktop using cups
View 8 Replies
View Related
Nov 22, 2010
I want to know How to find mountable devices and their device files in Linux.
View 4 Replies
View Related
Oct 4, 2010
I'm running archlinux & just recently started having a problem where ALL USB devices will stop responding for a second when a new USB device is plugged in. dmesg doesn't provide any hints.For example, I've got my music on an external HD & it will stop playing for like ~30 seconds if plug in my camera or gamepad...This issue only seemed to start after my home partition was erased & re-created, though I don't see how these two issues could be related.I've been running a custom kernel (2.6.35-rc6) for the past few months, and that hadn't changed to spur this issue. Thinking it may have been something weird with the kernel, I even switched over 2.6.36-rc6-mainline, yet this did not remediate the issue.
View 2 Replies
View Related
Dec 19, 2010
I have installed it (11.3) with KDE desktop.I have a problem with openening a device (harddisc) directly from sysinfo:/It is a ext4 partition, but also with my others (ntfs), this error occurs...
View 9 Replies
View Related
Jul 20, 2010
I've been playing with Ubuntu for a few years, and it runs great on said notebook, so I' m starting to ween myself from Windows.Biggest consideration for switch is music. I currently have an iPod touch 16. Been using itunes for a long time.I'm not married to the device or the software, and will rebuild my music library if needed (it's a pig of a mess anyway).I'm curious which mp3 device you are using and what linux software you are using it with for great results. I want a high end player iwth 16+ gig, and a music manager to keep a 10000+ file library organized. I frequently want to change the mix of albums on my device. I'm fine with buying music elsewhere from Apple. Prefer it actually - Amazon is a good choice.Should I keep hte iPod? Trade it for a Zune or something else? Sound quality is very important to me. As is wireless access/browsing, storage space, battery life, etc
View 2 Replies
View Related
Nov 1, 2010
I am running 9.10 latest updates (as far as I know) My problem is with my usb connections.I cant connect different usb devices to the same usb ports if a device had been previously connected to it. IE: I have to keep my camera connected to one particular port. If I disconnect it and connect anything to it, it cant be seen. It doesnt matter if I reboot. Is there a way to clear out any memory that stores the usb port assignments?
View 1 Replies
View Related
Aug 1, 2010
you have to read from many devices separate devices and make it look like a single one. It sounds very much like a device driver to me, perhaps... but getting my hands dirty with kernel code sounds like a daunting task for me that I've never done it...
View 2 Replies
View Related
Mar 19, 2011
I recently installed a new sound card, and I need to find out how to change the default device. Currently, I'm dual-booting Windows, and I had re-enabled the on-board audio in the PC's bios. After doing that, Debian started detecting that on-board as the default sound device. Is there a way to set my sound card to be used instead? I found out that the 'alsaconf' utility has been phased out. I"m currently running Debian testing, for amd64.
View 4 Replies
View Related
Aug 18, 2009
i have an isolated LAN (no connection to outside) with 3 fedora boxes. Suppose one of the boxes has an IP device connected to the serial port. We use SLIP and slattach to configure it and we can ping the device from every fedora boxes. Is it possible to bring the external device (192.168.1.9) to the set of LAN devices that receive LAN broadcasts?
box 1: 192.168.1.1
box 2: 192.168.1.2
box 3: 192.168.1.3.
It runs slattach and uses 192.168.1.9 to address serial connected ip device. I set up this scenario and the external device is ping(ed) with success but if I build a socket udp program that sends a broadcast to the LAN all the fedora boxes receive it except the external serial device. Why.
View 1 Replies
View Related
Sep 5, 2009
When I connect my Treo 650 with a USB cable it works sometimes and not others. A little investigation showed
that it always works when I see the Palm device listed in the output of lsusb. While trying to diagnose why it appears sometimes and not others, I discovered that it sometimes appears in /proc/bus/usb/devices and not
in lsusb. I didn't think that was possible!
I've tried running kudzu (the Red Hat hardware discovery tool) and killing and restarting udevd.
View 2 Replies
View Related
Apr 13, 2010
All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?
View 3 Replies
View Related
May 14, 2011
Ok, so a few weeks back my 6 year old daughter wanted to scan a picture she had made for a school project, I hadn't used my AGFA snapscan e20 for years, Infact it had been in a box for more than 5 years.
anyhoo I thought I'd give it a go and with some doubt plugged it in. Much to my joy and my daughters joy it just worked, there was life in the old dog still So two or three weeks on after I've installed a kernel update as well as others on my daughters Dell Optiplex GX620 Ubuntu 10.04 LTS (2.6.32-30-generic #59-Ubuntu SMP), my multi operating system literate 6 year old has drawn another master piece and popped it in the scanner only to recive the following error from simple-scan
What I'd like to know is,
1, How do I remove the entry for the scanner in simple-scan (ahh the old reinstall never fails)
2, why am I getting nothing back from my tail
3,Why did it break in the first place?
4, how to fix it (if not with a reinstall)
Please help as I don't want to break the "My Dad can fix anything" illusion my daughter has just yet.
View 8 Replies
View Related
Jun 7, 2011
Machine is an MSI U130 netbook running Ubuntu 10.04.2 LTS 01:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe interface
Code:
wlan0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
[code]....
I realize that Ubuntu recognizes the card, but I'm not sure why it's not picking up any networks that are around and says "disconnected", even though I've made sure that the wireless network light is enabled on the netbook.
View 9 Replies
View Related
Apr 9, 2010
Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports
'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..
View 3 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
