Ubuntu Multimedia :: Install The ATI Proprietary Driver Using The Automatic Option ?
Apr 7, 2011
Steps that the pdf file from ati says :
To install the ATI Proprietary Linux driver using the Automatic option, follow these steps:
1 Launch the Terminal Application/Window and navigate to the ATI Propri-etary Linux driver download.
2 Enter the command sh ./ati-driver-installer-8.573-x86.x86_64 to launch the ATI Proprietary Linux driver installer.
The ATI Proprietary Linux Driver Setup dialog box is displayed It shows the ati with the penguin. Mine doesnt show that for the file: "ati-driver-installer-11-3-x86.x86_64.run
This is the driver that I got from the website. But Im still having issues with Wow not working or recognizing that I have a great card (XFX HD 4770).
View 8 Replies
ADVERTISEMENT
Jan 23, 2010
I'm running a slightly upgraded Dell Inspiron B120 with 2 Gig RAM, 200 Gig HD. I recently switched this laptop from XP to Ubuntu 9.10. After many a long hour, I was able to get World of Warcraft running under wine but its slow to the point of being unplayable. I was used to slow gameplay on this laptop under XP, but 0 fps is a new low. Dalaran (the notoriously laggiest place in the game) is a joke. There's a 5-10 sec lag between hitting the button to move and actually going anywhere. I took all the video settings down to the minimum and did a regedit to add a key for wine.
Basically I tried all the tips and tricks I could find (including creating an xorg.conf file since I didn't have one). Nothing I did worked. I can be in the most remote, unpopulated spot in the game and I can't get more than 3fps. Somewhere I read that I should install a proprietary driver for my video card (intel GMA 900). So I went out and downloaded xf86-video-intel-2.10.0 and ran the configure script that came with it. It came back and said
Code:
No package 'xorg-server' found
No package 'xproto' found
No package 'fontsproto' found
so I went out and found Xorg-Server-1.7.1 and ran its configure script which gave me
Code:
No package 'x11' found
I tried setting $PKG_CONFIG_PATH to /etc/X11/ with no joy.
Now I am new to linux but in poking around the file system I did see /etc/X11/ which had some stuff in it. To me that says that I've got X11 installed but then again I've been using linux since breakfast so what do I know? What do I need to do to install a proprietary video driver -OR- what can I do to get the game running well enough to be playable (short of walking over to my windows desktop computer)?
View 9 Replies
View Related
May 26, 2010
I am using the most recent ubuntu kernel (2.6.32-22-generic) for general stuff, and a real time kernel (2.6.31-10-rt) for music recording. Everything was working fine under Karmic.
When I upgraded to 10.04, I had problems with my Nvidia video card, so I uninstalled everying related to Nvidia. And reinstalled the driver using the installer script from the Nvidia website.
I can install the driver for one kernel, but when I boot on the other, it says my X config does not work, and I am back to a low-res no-effect display.
If I then try to reinstall the driver under that kernel, then the first one stops working with the Nvidia driver.
View 1 Replies
View Related
Nov 23, 2010
Installing Mythbuntu 10.10, which I finally got installed properly. At first I installed the open-source video drivers just to make sure the installation worked, then I installed the "version current" proprietary drivers using the graphics drivers manager...tool...thing. However, when I restarted the computer, it has a text-mode splash screen and I stay in the first virtual terminal.
If I try to go to the GUI "terminal" [Ctrl-Alt-F7], it appears to be partway through some kind of check:
Code:
I ran sudo dpkg-reconfigure xserver-xorg to try to get back to the open-source drivers, but it didn't give any text output and went straight to the next line of command prompt, when I restarted it did the exact same thing. Any tips for at least getting back to the open drivers? I'd like to not have to reinstall again (I'm dual-booting WinXP,). The card in question is a GeForce 6200 AGP.
View 6 Replies
View Related
Nov 29, 2010
I'm afraid I only have basic experience with *nix command lines and have only been using Ubuntu for a week, so I may require a little bit of hand holding on something as nuts-and-bolts as a driver issue.
Relevant Hardware:
From lspci -v
Quote:
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3470 (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device e390
Flags: bus master, fast devsel, latency 0, IRQ 49
Memory at 80000000 (64-bit, prefetchable) [size=256M]
Memory at 90200000 (64-bit, non-prefetchable) [size=64K]
I/O ports at 2000 [size=256]
[Code]....
The Symptoms/Experience: Under the default installation of Ubuntu, I have no sound. When I install the proprietary ATI drivers, I have sound. I can uninstall and reinstall the proprietary drivers and recreate this every time.
My only problem with using the proprietary driver is that there's a lot of problems with video playback that is fixed with the free, default driver. But when I use it, I have no sound and watching a movie is still not very fun. From everything I read, many people are using the provided ATI driver with sound and fixing that should be easier than fixing the ATI driver's video tearing, which has largely stumped the community. Having failed to install "OSS" and now having no sound with either driver, I'm probably going to reformat/reinstall today but am looking forward to fixing this issue.
View 5 Replies
View Related
Jan 9, 2011
I installed the proprietary driver in System->Administration->Additional Drivers, but after installing when I am required to restart, I restart my computer and encounter a black screen. I tried using Ctrl-Alt-'-" to change the resolution but that didn't work because the computer is completely frozen, so I have to reboot in recovery and uninstall the driver...
This also makes it so I am unable to go to the maximum resolution my desktop can obtain. (1920 x 1200, but I'm limited to 1600 x 1200)
View 1 Replies
View Related
Sep 1, 2011
I have Ubuntu 11.04 on a netbook, and I'm getting a lot of tearing on video playback--both online and offline. The graphics card is some generic intel card, and there doesn't seem to be a driver for it. So, is there a way to enable vsync without having a proprietary driver?
View 3 Replies
View Related
Feb 20, 2016
Debian Jessie kernel 3.16.0 AMD64. Legacy GeForce 66oo GT video card.
I just re-installed Jessie via Debian non-free DVD. When I run apt-get update && apt-get upgrade, the screen says to the effect :
"Before Nouveau can be used, must remove Nvidia config from xorg.conf and xorg.conf.d"
Is there a simple way to keep Nouveau and blacklist or prevent Nvidia driver from being automatically installed in the first place?
View 6 Replies
View Related
Aug 1, 2010
I installed ATI 10.7 driver successfully but its not up to my expectations, e.g VLC not working right (video stutters, etc). And I want to revert back to the default radeon which was a lot better until the ATI 10.8 driver comes out.
By the way, what is this in my /usr/share/ati/fglrx-install? code...
And how do I revert back to 'radeon'?
View 9 Replies
View Related
May 5, 2010
I'm still searching for a propiertary driver for my netbook (Asus EEE 901 with an Intel GMA950 graphic card). Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Does someone know how to install a driver with 3D-support? Should I use a driver from[URL].. I had no problems at Karmic, because the driver was found at "Hardware Drivers". Lucid doesn't show me any driver there. Is there any correlation between the big intel-graphic issues and my 'problem'?
View 5 Replies
View Related
Dec 17, 2010
I'm using ubuntu 10.10 with the proprietary Nvidia-driver for my graphics card. I'd like to switch to the open source Nouveau driver. What is the best way to go about this?
View 9 Replies
View Related
Aug 4, 2011
I just bought a new Club 3D (ATI) Radeon HD 3450 (8xAGP) graphics card, but received with it some problems.My Ubuntu 10.04 installation would not boot any more. It just gave a blank screen while caps- and scroll lock were flashing on the keyboard.
I then installed 11.04 which works fine except being unable to play even 720p video smoothly (the card should be able to play at least 1080p). When I enable the restricted driver ("ATI/AMD proprietary FLGRX graphics driver") and restart, the system will not boot. It gets to the point where it displays the "ubuntu" sign with the five dots below (where the dots normally change color one at a time), they all change color immediately and then the system freezes.
I realized when I received the card that it requires a power supply of 300 W, whereas the one in my PC is only 240 W. Could this cause the explained behaviour? I am not too happy about changing the power supply, unless there is real reason to think that this is the source of the problems, since I know myself well enough to know that I will probably break something in the process.
View 2 Replies
View Related
Jun 25, 2010
I want to create diskless comupters for a lan party using an nfs root. My problem is that this root filesystem should be usable on different hardware (AMD / nVidia graphic cards) and I need the best performance.
My question is : Is there a way to activate automatically proprietary driver on startup without modifying root filesystem ?
View 1 Replies
View Related
Aug 23, 2011
I have ATI Radeon HD 5650 (code name Redwood) on Ubuntu 11.04. And I have been experimenting with open-source and proprietary driver.
The problem with proprietary driver is bad 2D rendering when watching movies in VLC (and any other), because if vsync is off, video is tearing and when its on, the video seems to stutter (the background moves in steps, not smooth). I have tried open-source radeon driver and its far better, but that driver doesn't have 3D acceleration for playing games. I was trying to play Hive Rise, and with proprietary driver works great, but with open-source the game starts, but i don't see the interface (start game, options, etc.).
It seems that Mesa 7.10 (in Natty) doesn't have 3D support for this card, but Mesa 7.11 (in Oneiric) will have that. Is that correct? I just want to have good 2D performance with ability to play games.
View 3 Replies
View Related
Feb 25, 2011
Card is the Radeon x300 and in the past in a wubi install I installed the propreitary ATI driver. I'd like to do that with this installation too. I've located the proper driver and tried to run in the terminal.
I get this error:
I've read were I have to uninstall the xorg drivers and make a .deb package but idk how to do that.
View 2 Replies
View Related
Jul 19, 2011
My laptop runs really hot and after reading a few threads around the forum I came across one that said it was because of the fact that ubuntu comes with an open source driver.All you have to do is update to the proprietary driver and everything is fixed. So I went to the menu and looked for the driver. I honestly didn't check if the one that was found was compatible with my graphics card, I just assumed that the one that it found was the right one. I installed it and restarted and ubuntu wouldn't load. It goes through the initial load but when it comes time to bring up the login page, it stays black and never advances. I assumed that this was a result of an incorrect driver. Again, I turned to the forums and found that other people had this problem. So I grabbed my trusty live CD and tried to load up a live session and remove the config file that points to the driverThe live CD wouldn't load. Same thing for recovery mode. It gets to a certain point and stops. This link is an image to where the boot stops:
View 3 Replies
View Related
May 20, 2010
Very new to linux, just downloaded Ubuntu 10.04 and installed it, dual boot, no problems with initial installation.
Trying to install graphics card driver for:
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GTS 512] (rev a2)
Using Administration -> Hardware Devices
I selected the recommended driver and clicked activate. Download started then failed with error message:
SystemError: Failed to fetch http://gb.archive.ubuntu.com/ubuntu/...ntu3_amd64.deb Connection failed [IP: 91.189.88.30 80]
Screenshot attached.
Tried several times now and the download doesn't even seem to start any more.
My Internet connection is 3 mobile broadband, which may have something to do with it, bit it seems to be working well at the moment.
View 1 Replies
View Related
Aug 7, 2015
I recently switched from jessie to stretch on both i encountered a jerky ui in gnome 3. after a longer research i noticed xorg consumes over 80% of my first cpu-core while moving a window. for testing purposes i switched back to the nouveau driver and there is no high cpu usage while moving a window, also the ui is smooth.
i tried 3 different nvidia driver: the one from the debian repository, the current stable and beta driver from the nvidia site. i noticed on all 3 the same problem.
Code: Select alldaniel@Daniel-PC:~$ glxinfo | grep rendering
direct rendering: Yes
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_path_rendering, GL_NV_pixel_buffer_object, GL_NV_polygon_mode,
xorg.log: [URL] ....
dmesg: [URL] ....
system:
nvidia gtx 760
intel xeon e3-1230v3
View 1 Replies
View Related
Oct 30, 2010
I used the ATI executable to install the ATI videocard driver and now my Fedora install wont boot at all... it stops mid-bootup and the screen flickers and it just hangs. Is there any way for me to rescue my install with a Live CD or Live Media?
View 3 Replies
View Related
Aug 8, 2010
I've been running OpenSuSE 11.2 for some time now; my system is a Dell 64-bit with an ATI 46xx graphics card and I've used the proprietary ATI driver without difficulty, as the driver provided with OpenSuSE was pretty much unusable. I'm considering upgrading to v11.3, but there seem to be scattered horror stories involving ATI cards, particularly when it comes to ATI's proprietary driver.
View 9 Replies
View Related
Jan 27, 2011
I'm running Ubuntu 10.10 on an old small form factor PC with an AMD Sempron 2400, 1GB RAM, and an nVidia 5200 graphics card 128MB. OK, so a low-spec machine (but that's the great thing about Linux right? Don't need high-end h/w) but it works just fine, except that it can't play full HD (1920x1080) MPEG-4 video. Very jerky and lots of dropped frames. Same in both Movie Player and VLC.
I can't afford to increase the RAM and as it's a SFF I can't just swap the mobo and CPU for something faster so I'm wondering whether getting a higher spec graphics card would make any difference?I'm using the nVidia proprietary binary driver (latest version) and searching the forums I found a post where someone said that the nVidia driver needs at least a 512MB card for HD video.A colleague has a higher spec nVidia card (7600 IIRC) that he'll sell me, but before I spend any money, is this likely to improve things? How much does the graphics card affect performance, or is it simply a case of the machine overall just isn't high enough spec?
View 3 Replies
View Related
Mar 12, 2011
For those who need or want to install the latest ATI proprietary driver (Catalyst 11.2) right after a fresh 11.4 install - and might not look for solutions in the development subforum.In order to compile the module, I installed the kernel sources and the pattern devel_basis. I normally use most packages in this pattern, so I install it by default from other scripts. While running atiupgrade on a fresh install, I was surprised by the number of packages getting installed with that pattern.Please report if it doesn't work. (like aticonfig initial failed to add a fglrx section for some reason).Take a look at the atiupgrade thread in the development forum: Upgrading ATI driver with atiupgrade.
View 9 Replies
View Related
Oct 7, 2010
I've been trying to install the driver for my NVIDIA GeForce 6150SE nForce 430 in Slackware 13.1 with no success. I always get the same error report: the module you're trying to build does not match the kernel source or something like that. The result: unable to build module and the installation crashes.
I have tried to:set a custom kernel source path, install it with the slackbuilds driver and kernel, extract the contents and trying to compile it myself, find possibly conflicting drivers or modules, use different versions of the same driver (I've tried installing the versions 256.53, 256.44, 195.36.31 and 173.14.27)recompile the Linux kernel in an attempt to make sure that the tools used to build the kernel were the same used o build the module.
The only time I got a different error message was when I used the slackbuild packages. It built the 'nvidia.ko' module, but it didn't work. I got a version magic notice when booting and, when I tried to start x, a fatal error "no screens were found."
Just to be sure, I made a clean full install of Slackware (only added WICD to be able to download the drivers and ran slackpkg update and upgrade all) and tried again. It didn't work.
View 14 Replies
View Related
May 8, 2010
I know i know, some will say "eww Proprietary Drivers" but hey, ubunt is all about having more control of the OS. Is there an easy way to install Proprietary Drivers thats not through the hardware drivers option on system?
View 2 Replies
View Related
Dec 17, 2010
I'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).
Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?
View 14 Replies
View Related
Jul 21, 2010
since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies
View Related
Apr 17, 2010
I am currently running Ubuntu 9.10 on a Compaq Presario V3010US. My video card is an NVIDIA GeForce Go 6150 which appears to be running properly with some limitations (missing effects from CompizConfig). While utilizing the "Hardware Drivers" configuration a recommended driver is listed but when I attempt to activate this driver I encounter an error.
This error turns my attention to the log file :
This log file is extensive and I do not wish to post pages of code unless requested. The configuration does however list that "a different driver is in use". I have scoured threads to ensure that I have not posted a question that has been answered to no avail. Please bear in mind that I am in my Linux infancy and my grasp of this incredible operating system is cursory at best.
View 9 Replies
View Related
Jun 13, 2011
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
View 9 Replies
View Related
Jun 17, 2011
I have installed Xubuntu 10.04lts, Kubuntu 10.04LTs and Ubuntu 10.04lts because since I replaced my graphic card, I want to see which one of those 3 I like best and keep it. To do this, I need to configure my AGP Saphire HD4650.
Initially, I did not have any xorg.conf, so I went to recovery and created one with X -configure. This allowed to find out I was using Radeon driver from the start.
Then I followed the instruction from link "How To: Configure ATI Radeon HD 4650" but using kdm instead of gdm. Once I get to install the ATI driver ati-driver-installer-10-12-x86.x86_64.run, I get an error message that says to check the /usr/share/ati/fglrx-install.log.
Quote:
Unloading radeon module...
ERROR: Module radeon is in use
Unloading drm module...
ERROR: Module drm is in use by radeon,ttm,drm_kms_helper
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Code]....
View 7 Replies
View Related
Jul 5, 2010
I've just installed Ubuntu 10.04 desktop. I've created two user accounts, one for admin purposes and the other for standard users. At boot up, I have the option to pick one of the created accounts or select "automatic login." When I select automatic login, it logs me into the admin account. I've double checked that the "don't ask for password" option is not selected on either account.
The only thing unusual that I did was select the "don't ask for password" option during the install, and then later (after the install was complete) decided that's not what I wanted and unchecked it.
I need to accomplish one of two things. Either change it so the auto login applies to the standard user account, or remove the auto login option from the login screen altogether.
View 1 Replies
View Related
