Fedora :: Copying Files On Fedora Apache?
Aug 3, 2009I've tried to copy my files from Xamp httdocs in windows to /var/www/html,but I can't paste the file, what should I do so I can paste the files ?I have logged in as a root
View 5 Replies
ADVERTISEMENT
Fedora :: Input/output Error When Copying Files To Fedora Live CD?
Dec 21, 2010I booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:
Code:
Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075
Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0
[code]....
Networking :: Copying /var/named Files From Fedora 7 To Fedora 11 Does Not Configure Bind?
Aug 12, 2009host A: Fedora 7 has bind 9.4.2
host B: Fedora 11 has bind 9.6.1
I want to migrate my bind configuration from A to B I've read the release notes and man pages and I can't see why copying
/etc/named*
and
/var/named/*
I checked /etc/sysconfig/named too... Seems to have no effect on my brand new install on Fedora 11. Host B stays basically un-configured.
Fedora :: Copying Files Between Sata (fedora 13) And Ide (windows)?
Dec 30, 2010I currently have three hard drives: (2) 150GB IDE drives (windows) and (1) 500GB SATA drive (fedora13). I'm trying to move files on the IDE drives to the SATA drive so that I only need the SATA drive. The SATA drive is running Fedora 13 and the other two were old NTFS drives that I just use for space now. So most of the files copied fine, however, for a handful of them I receive the following error:Error splicing file: Value too large for defined data type This happens when I try to copy files not only from drive to drive, but even from folder to folder on the same drive. I've read about a 2GB file size limit, but none of the files are that size. I have no idea why this is happening.
View 5 Replies View RelatedFedora :: Copying Files Using Scp And Find?
Aug 29, 2010I want to use find and scp to copy files. Is there a way to copy files that have spaces in their names? I know you can add " tags for a single file but can find do that? This is the command that i use:
scp $(find -iname "*.avi") destination
Fedora :: Copying Files-No Permissions?
Oct 30, 2010I was told fedora is great operating system but all i run is into trouble, hours spend on searching for solutions and never get an easy answer as it is on Leopard or even windows 7.What's my problem. I installed a new dvd copy of fedora13, and now connected 2 USB hard drives that seem to connect fine, can access everything but if i try to copy files to one of the drives it says i don't have permissions, and the fields to change permissions access are blank.
View 1 Replies View RelatedFedora :: Rsync Not Copying All Files?
Sep 9, 2011My Source folder contains 424.8 GB in 502,474 files. My Destination folder was created fresh, and after the copy contains 394.0 GB in 486.514 files. I am running it as grsync with root authority. The only options are to preserve time, permissions, owner and group., and to produce a verose output and transfer progress. There are no exceptions specified to skip any files.
The rsync command is this:
rsync -r -t -p -o -g -v --progress -c -l -H -D -s /mnt/Backups/monthly.3/ /mnt/EX-Fantom/monthly.3/
I have run it again to give it a chance to get it right. Same result. The source is in an rsnapshot folder, but this is the first backup, the original, containing only whole files, not links.
Fedora :: System Lags While Copying Big Files
Mar 16, 2010Why system lags so much while working with a lot of files or with big files (copying them, erasing)? How it can be solved? I am running Fedora 12 x86_64 with ext4 filesystem
View 14 Replies View RelatedFedora Networking :: Copying SSH Files Into Computer?
Jul 18, 2010I have a saved a .c file on my department computer and i am able to access it through my computer via SSH. BUT I WANT TO copy and paste it into my system.
View 3 Replies View RelatedFedora Servers :: Copying Log Files From Server Using Ssh?
Aug 12, 2010I have a server with RedHat distro which stores and updates someg files and second computer with Windows 7 on it. I must configure both machines so one can get those files from server to Win7 machine using ssh. But I have no idea how to do it.
View 3 Replies View RelatedFedora :: Copying Files To And From Virtual Machine?
Mar 11, 2011I have installed Windows XP with Virtual Machine Manager. The question is how do I access files on my primary linux system? Also can I mount a NTFS partition in my Virtual Machine
View 14 Replies View RelatedFedora Hardware :: Low Transfer Rate When Copying Large Files Over Wireless
Jan 11, 2010I just bought a HP 3085dx laptop with an intel 5100 agn wireless card.
The problem: copying a big file over the wireless to a gigabit hardwired to the router computer only gives an average 3.5MB/Second transfer rate. If I do the same copy from my wireless-n macbook pro to the same computer. I get a transfer rate of about 11MB/sec. Why the big difference? I noticed the HP always connects to the 2.4 GHZ band instead of the 5GHZ bands...
On the HPL
[jerry@bigbox ~]$ ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:246:36:AC4
inet addr:192.168.1.75 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:d6ff:fe36:acc4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:639243 errors:0 dropped:0 overruns:0 frame:0
TX packets:1293049 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:53832795 (51.3 MiB) TX bytes:1888619922 (1.7 GiB)
[jerry@bigbox ~]$ iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:"<censored>"
Mode: Managed Frequency:2.412 GHz
Access Point: 00:24:36:A7:27:A3
Bit Rate=0 kb/s Tx-Power=15 dBm
Retry long limit: 7 RTS thr: off Fragment thr:off
Power Management: off
Link Quality=70/70 Signal level=-8 dBm Noise level=-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not getting any errors. I don't know why the bit rate is not known. My airport extreme base station typically reports that the 'rate' for the hp is typically 250~300MBi and about the same for the MacBook Pro. The hp is about 6 inchs away from the base station. Is there anyway to get the rascal to go mo'faster? Is there anyway to get the rascal to use the 5GHZ band.
Fedora :: Unable To Edit The Files Under Root Directory Of Apache?
Jun 12, 2011why i m unable to edit the files under root directory of apache ?and how to fix that plz tell me ?
View 3 Replies View RelatedFedora Servers :: F11 & Apache Permissions - Reading Files Out Of The Html Directory
Jun 12, 2009With F11 installed Apache is having permissions issues reading files out of the html directory. Only wants to work with permissions set to read for other. [Thu Jun 11 23:25:28 2009] [error] [client 127.0.0.1] (13)Permission denied: file permissions deny server access: /var/www/html/index.html Tracked down the permissions issue. Is there a good reason not to change the group to apache and remove world read?
View 1 Replies View RelatedFedora Networking :: Config The Httpd Apache Server To Upload Files
Jan 6, 2011my task is to store the data to a file at server sent via HTTP POST, i written suitable cgi script in C, but the PROBLEM is that i can't complete the task, I guess i require server permission to do so, how to configure server or how to get access right from server to store data to a file.
View 3 Replies View RelatedFedora Servers :: Cannot Start Apache - No Read / Write Access To HTTP Files
Jan 14, 2009I am trying to setup my webserver and I am trying to make a website to run under suexec but somehow I cannot start my apache it directly fails and SELinux is giving me errors and don't really know what to do with it, it is giving me some command to type but not sure if this will make my server less secure. The SELinux error is as follow:
Code:
Summary:
SELinux prevented httpd reading and writing access to http files.
Detailed Description:
SELinux prevented httpd reading and writing access to http files. Ordinarily httpd is allowed full access to all files labeled with http file context. This machine has a tightened security policy with the httpd_unified turned off, this requires explicit labeling of all files. If a file is a cgi script it needs to be labeled with httpd_TYPE_script_exec_t in order to be executed. If it is read-only content, it needs to be labeled httpd_TYPE_content_t, it is writable content. it needs to be labeled httpd_TYPE_script_rw_t or httpd_TYPE_script_ra_t. You can use the chcon command to change these contexts. Please refer to the man page "man httpd_selinux" or FAQ [URL] "TYPE" refers to one of "sys", "user" or "staff" or potentially other script types.
Allowing Access:
Changing the "httpd_unified" boolean to true will allow this access: "setsebool
-P httpd_unified=1"
Fix Command:
setsebool -P httpd_unified=1
I will write down how I did setup my server so maybe you can see a mistake I did. First I changed my Apache httpd.conf I added the following to it:
Code:
NameVirtualHost 192.168.1.2:80
<VirtualHost 192.168.1.2:80>
ServerName localhost
DocumentRoot /var/www/html
DirectoryIndex index.html index.html index.shtml index.php
</VirtualHost>
<VirtualHost 192.168.1.2:80>
SuexecUserGroup ulyaoth ulyaoth
ServerAdmin webmaster@ulyaoth.org
ServerName test.ulyaoth.org
DocumentRoot /var/www/ulyaoth/www/html
ErrorLog /var/www/ulyaoth/logs/error_log
CustomLog /var/www/ulyaoth/logs/access_log common
DirectoryIndex index.html index.htm index.shtml index.php
ScriptAlias /cgi-bin/ /var/www/ulyaoth/www/cgi-bin/
<Directory /var/www/ulyaoth/www/cgi-bin/>
AllowOverride none
Order allow,deny
Allow from all
Options +execCGI
AddHandler cgi-script .cgi .pl
</Directory>
</VirtualHost>
Then I created the username "ulyaoth" with the group "ulyaoth" as I specified with my suexec, then I created all the directories as specified in my httpd.conf and "chown ulyaoth:ulyaoth (dirname)" them to the right group and username.
OpenSUSE :: Dolphin Losing Files When Copying Many Files Or Large Folders?
Feb 14, 2010I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
Fedora :: Copying A File System With Dd?
Nov 26, 2009I want to copy a file system with dd. Most of the forums and how-to's warn that the file system must be unmounted. Otherwise, data could be changing and inconsistent or, at best, there may be open inodes, and the copied file system would need to be recovered the first time it is mounted. However, is it sufficient if the file system is mounted read-only? Or does a file opened with read-only still result in an open inode?
View 2 Replies View RelatedFedora :: Copying A Partition To A Brand New Pc?
Dec 26, 2009I have a dual boot-up desktop system with Window XP and Fedora. Linux was installed after Windows came installed with the system. The system has only one hard drive and both the OS are on the same drive but on different paritions. Is it possible to copy the whole Fedora Linux parition to a new hard drive and then install the new hard drive on an entirely desktop to make it work like the old system? Will all the setting in Fedora remain the same? All the file and enviornment variables or the changes made will be retained on a new system? What to do? Which software to use?
View 3 Replies View RelatedFedora :: Copying All Of .wine To Another Computer?
Jan 12, 2011I've lost some install disks which cannot be replaced and need to copy my entire /home/username/.wine to my laptop.
I already have installed wine on the laptop and it is the same version of Fedora (14) as is on my desktop.
Is it possible to mass copy the entire desktop /home/username/.wine, and copy it onto the laptop?
Do I do the copy as user or as root? I need to get everything, the system files registery and ProgramFiles etc. and then copy it on to the lap top with exactly the same permissions.
So I would, for example, type tar -zvcp allWine.tgz /home/username/.wine/*.*
Fedora :: USB Crashes While Copying On 15/GNOME 3?
Jul 12, 2011This usb crashes every time copying about 1,200 files of size 800k - 1.2m. Some right away and others randomly. Using the file manager and dragging the image folders from the USB to the local drive. Upon the crash, the USB cannot be used for anything until the system is rebooted.Below are the error messages from GNOME 3 and dmesg GNOME 3 messages:
Error splicing file: Input/output error
A dialog window would ask to Cancel, Skip All or Skip. but by this time the USB had already stopped.
dmseg output:
[ 333.560089] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 333.676405] usb 2-2: New USB device found, idVendor=058f, idProduct=6364
[ 333.676411] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code].....
Fedora Networking :: Copying Authorization Keys?
Dec 12, 2010Using SSH all the time on my home network. I use ssh-keygen and ssh-copy-id to generate and then copy the key file. On one of my computers I've changed the default ssh port and see no way to copy the key without reverting the configuration to port 22 temporarily. This is not a big deal and would probably take less time than it has taken me to type this message.
View 3 Replies View RelatedFedora :: Copying Core 10 To An External Drive?
Jun 20, 2009I am thinking about using aida to nuke my drive and then I'll re-partition it with gparted. I don't want to lose my 15 GB installation of Fedora Core 10 in the process and have an external 80 GB drive. How could I back up Fedora to this drive with the intention of copying it back to my internal drive?
View 2 Replies View RelatedFedora :: 13 Copying Data Very Slowly To External HDD?
Jun 23, 2010I have Western Digital 1 TB external HDD. I had slackware 13 and it could copy data to it with speed around 30 MB/s (copy from machine to HDD) and it was cool. It's usb 2.0 as KInfoCenter says. But now in fedora 13, it's like 1 MB/s or even less (KInfoCenter still says usb 2.0). Any special mount option to set in fuseblk to speed it up? I mean something like blksize or like that?
Code:
/dev/sdc1 on /media/My Book type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
Fedora :: Copying CDs / DVDs (Video And Data) In Raw Mode
Dec 10, 2009I'm trying to find out which application will copy DVD discs (video and data) in raw mode. Something that works for DVDs like cdrdao works for CDs. I tried using cdrdao but it errors out because the DVD disc is too big for it. I tried looking at Brasero but I can't tell if it offers a raw option. I see that Brasero lets you copy a DVD to a RAW image, then burn the RAW image back to a DVD-R. If Brasero uses RAW mode to do a direct copy, this would essentially do the same thing, but I can't tell if that is what it does. But, I think this will work.
View 3 Replies View RelatedFedora :: Random Crashes & Freezes Copying From NTFS?
Dec 22, 2009I am in the process of trying to move my files from a windows 2003 install over to fedora 12 using the Fedora 12 x86_64 Live image.
After some initial problems with burning the ISO image (had to enable disk-at-once to get rid of I/O buffer errors). And a GPF in the xor_sse2 module while building my software raid 5 arrays (forced to reboot, unable to stop or restart the array) I finally managed to create a single LVM volume group ontop of it all.
Initially I ran some tests on the raid volume and wrote a large 100GB file filled with zeroes all over it to be sure that it was functioning normally. After that I proceeded to copy files over from the NTFS volume to the LVM volume. which resulted in lots of errors on my terminal and complete loss of the entire filesystem. Even a simple ls -l / resulted in "Bus Error" although the system still kept running for a few seconds, until it finally froze and spontaneously rebooted. Since then I ran memtest to be sure my memory is fine, and tried alternative ways of mounting the volumes, and copy methods. Each attempt resulted in either a complete freeze or instant reboot. After 6 reboots, I managed to copy 20GB out of 490GB. Obviously this will take forever this way.
/var/log/messages is unhelpful. There are a bunch of cryptic messages regarding ATA bus errors (mostly CRC errors it seems) and soft resets when the LVM volume get mounted, but everything functions fine until I touch the NTFS volume.
Here are some of them:
Code:
Dec 22 02:32:15 localhost kernel: ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
Dec 22 02:32:15 localhost kernel: ata6.00: BMDMA stat 0x4
Dec 22 02:32:15 localhost kernel: ata6.00: cmd ca/00:80:02:a5:fb/00:00:00:00:00/e7 tag 0 dma 65536 out
[Code].....
Fedora :: There Was An Error Copying File Into Smb://path/folder?
Jun 10, 2010I'm using fedora 13 to connect to my server's share folder(windows server 2003) and i found that i can create folder,create file, access and open or delete the file in the window share folder, but i can't save or replace the file in the share folder. the error message is like below...there are error copying file into smb://path/folderShow more detail:
Invalid argumenti also have attach the pictureby the way....i had disable the firewall and selinux already....but still can't save the file into the window share folder.previously i use fedora 11 and all is ok with no problem, but the fedora13 got this problem, please tell me what cause this happen?
Fedora Installation :: F13 Live CD Stalls At Copying Imade To HD?
Nov 9, 2010I am doing a clean install of Fedora 13 XFCE4 spin from the live CD. Live CD boots and functions normally. Installation from Live CD works as advertised up to point where the installer starts to copy the disk image to the HD. Progress bar initially moved fairly rapidly then stopped and installations stalls.
I've tried the installation three times with the same result. I've seen other posts referring to problems with SELinux, but this should not be a factor here as the install is clean.
Fedora Hardware :: Unsupported Operation While Copying - External HD?
Jul 25, 2011My USB ntfs external hard drive mounts fine when I plug it in and I can often copy files with no problems.However, I have some large folders on my machine (~10 GB with ~ 200,000 files) which begin to copy to the external drive but then stop with the error "Unsupportes operation while copying <filename>." The file currently being copied when this happens appears to be random. Does anyone know what the issue is and/or how to fix it?
View 6 Replies View RelatedRed Hat / Fedora :: RAID And Disk Transfer For Copying Contents
May 5, 2011I had used DELL 1950 with 300 GB raid disk. Now, I purchased Dell 2950 with 450 GB (6 disk - 3 pairs of raid). I wanted to pull out old 300 GB from 1950 and put it in 2950 (temporarily) to copy all contents to the new system. How do I know which HDDs I need to pull out from 2950 so that I can replace them with 300 GB HDD to mount. I do not know how raid setup (I know unix alone - not raid commands). Is this possible? How to do it?
View 5 Replies View Related
