Fedora :: Copying Files Between Sata (fedora 13) And Ide (windows)?
Dec 30, 2010
I currently have three hard drives: (2) 150GB IDE drives (windows) and (1) 500GB SATA drive (fedora13). I'm trying to move files on the IDE drives to the SATA drive so that I only need the SATA drive. The SATA drive is running Fedora 13 and the other two were old NTFS drives that I just use for space now. So most of the files copied fine, however, for a handful of them I receive the following error:Error splicing file: Value too large for defined data type This happens when I try to copy files not only from drive to drive, but even from folder to folder on the same drive. I've read about a 2GB file size limit, but none of the files are that size. I have no idea why this is happening.
View 5 Replies
ADVERTISEMENT
Dec 21, 2010
I booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:
Code:
Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075
Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0
[code]....
View 6 Replies
View Related
Aug 12, 2009
host A: Fedora 7 has bind 9.4.2
host B: Fedora 11 has bind 9.6.1
I want to migrate my bind configuration from A to B I've read the release notes and man pages and I can't see why copying
/etc/named*
and
/var/named/*
I checked /etc/sysconfig/named too... Seems to have no effect on my brand new install on Fedora 11. Host B stays basically un-configured.
View 2 Replies
View Related
Aug 3, 2009
I've tried to copy my files from Xamp httdocs in windows to /var/www/html,but I can't paste the file, what should I do so I can paste the files ?I have logged in as a root
View 5 Replies
View Related
Aug 29, 2010
I want to use find and scp to copy files. Is there a way to copy files that have spaces in their names? I know you can add " tags for a single file but can find do that? This is the command that i use:
scp $(find -iname "*.avi") destination
View 12 Replies
View Related
Oct 30, 2010
I was told fedora is great operating system but all i run is into trouble, hours spend on searching for solutions and never get an easy answer as it is on Leopard or even windows 7.What's my problem. I installed a new dvd copy of fedora13, and now connected 2 USB hard drives that seem to connect fine, can access everything but if i try to copy files to one of the drives it says i don't have permissions, and the fields to change permissions access are blank.
View 1 Replies
View Related
Sep 9, 2011
My Source folder contains 424.8 GB in 502,474 files. My Destination folder was created fresh, and after the copy contains 394.0 GB in 486.514 files. I am running it as grsync with root authority. The only options are to preserve time, permissions, owner and group., and to produce a verose output and transfer progress. There are no exceptions specified to skip any files.
The rsync command is this:
rsync -r -t -p -o -g -v --progress -c -l -H -D -s /mnt/Backups/monthly.3/ /mnt/EX-Fantom/monthly.3/
I have run it again to give it a chance to get it right. Same result. The source is in an rsnapshot folder, but this is the first backup, the original, containing only whole files, not links.
View 3 Replies
View Related
Mar 16, 2010
Why system lags so much while working with a lot of files or with big files (copying them, erasing)? How it can be solved? I am running Fedora 12 x86_64 with ext4 filesystem
View 14 Replies
View Related
Jul 18, 2010
I have a saved a .c file on my department computer and i am able to access it through my computer via SSH. BUT I WANT TO copy and paste it into my system.
View 3 Replies
View Related
Aug 12, 2010
I have a server with RedHat distro which stores and updates someg files and second computer with Windows 7 on it. I must configure both machines so one can get those files from server to Win7 machine using ssh. But I have no idea how to do it.
View 3 Replies
View Related
Mar 11, 2011
I have installed Windows XP with Virtual Machine Manager. The question is how do I access files on my primary linux system? Also can I mount a NTFS partition in my Virtual Machine
View 14 Replies
View Related
Jan 11, 2010
I just bought a HP 3085dx laptop with an intel 5100 agn wireless card.
The problem: copying a big file over the wireless to a gigabit hardwired to the router computer only gives an average 3.5MB/Second transfer rate. If I do the same copy from my wireless-n macbook pro to the same computer. I get a transfer rate of about 11MB/sec. Why the big difference? I noticed the HP always connects to the 2.4 GHZ band instead of the 5GHZ bands...
On the HPL
[jerry@bigbox ~]$ ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:246:36:AC4
inet addr:192.168.1.75 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:d6ff:fe36:acc4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:639243 errors:0 dropped:0 overruns:0 frame:0
TX packets:1293049 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:53832795 (51.3 MiB) TX bytes:1888619922 (1.7 GiB)
[jerry@bigbox ~]$ iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:"<censored>"
Mode: Managed Frequency:2.412 GHz
Access Point: 00:24:36:A7:27:A3
Bit Rate=0 kb/s Tx-Power=15 dBm
Retry long limit: 7 RTS thr: off Fragment thr:off
Power Management: off
Link Quality=70/70 Signal level=-8 dBm Noise level=-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not getting any errors. I don't know why the bit rate is not known. My airport extreme base station typically reports that the 'rate' for the hp is typically 250~300MBi and about the same for the MacBook Pro. The hp is about 6 inchs away from the base station. Is there anyway to get the rascal to go mo'faster? Is there anyway to get the rascal to use the 5GHZ band.
View 3 Replies
View Related
Jan 3, 2011
How can I copy some files from a windows machine to Linux machine ?
View 13 Replies
View Related
May 8, 2011
i am accessing linux through putty and i wrote somany programs in unix using putty and gedit but now i need to copy all files into windows. how to copy directory(linux) to folder(windows) without installing any softwares?If it is necessary to install software to copy files then tell me the process of using that software.
View 5 Replies
View Related
Jan 20, 2010
I need to copy ~300GB of drives from one Windows hard drive to another using a Ubuntu live CD. (I currently don't have enough power connectors for my Windows system drive AND both existing and new data drives. Stupid power supply.)
By Windows drive, I mean the drives are only data drive (no Windows install) but the files on the first drive were created and are used by my Windows system, both were formatted NTFS in Windows, and the files will again be used by Windows on the second drive.
Are there any pitfalls I need to be aware of, or can I literally just drag the files across in Nautilus? Is there a faster copy utility available (I know there are Windows programs that can copy faster than drag-n-drop, but I'm sure Ubu doesn't have the same problem ) Will using a Live CD cause any specific issues?
View 8 Replies
View Related
Mar 8, 2010
I want to search a Windows partition for all .doc and .xls files and move them over to Xubuntu to burn them to CD.
Is this easiest to do via terminal? I tried to use catfish and select all files, but I think my Mac keyboard (and USA standard keyboard settings) threw the select all files ability.
View 4 Replies
View Related
Mar 15, 2011
I am facing problem in copying a large number of file 18 lakh (18,000,000) files from my personal hardisk to another hardisk each file is very small and size of folder is around 3.95 GB copying files using copy given by Windows is frustrating and I am not even able to compress file its giving me error that its not readable.And problem is I am not able to open this drive in Linux it showing me error there saying do diskchk in Windows and Windows disk check is also not able to repair this drive and goes into some mode unsolvable.Is there any way to open disk with error to open in Windows and if not any way I can copy data faster?ERROR: Disk labled EDU is corrupt go to windows and chkdsk /f there and reboot into window 2 times.
View 3 Replies
View Related
Mar 4, 2010
I have an SD card that I formatted using my Ubuntu machine to contain one raw Linux partition and one FAT32 partition. Does anyone know of a way to be able to copy files to/from the SD card and my Windows PC? Right now, when I plug the SD card into my Windows PC, the FAT32 partition doesn't appear. When I try to copy files from my Windows PC to the raw Linux partition on the SD ard, I get "bad magic number" errors on the device that I use the SD card with. Is there some utility I can use on my Windows PC to be able to correctly read this SD card? It would be very convenient to have that for travel, etc when I don't have easy access to the Ubuntu machine.
View 1 Replies
View Related
Mar 16, 2011
I have purchased a DLink Sharecenter Pulse NAS as my PC failed. I wanted to put the two SATA drives in and extract the data before formatting to use as JBOD or RAID. However, before I managed to access my data, the setup software started formatting the drives. I switched it off immediately.
Purchased a SATA to USB2 lead and connected to my work laptop but I cannot see the drive(s). Used Partition Magic and each drive has 3 partitions - of which show about 74GB as used and 2 x 512MB as not. Looks like the drives have been partly set for Linux but the format was not comlete. Have tried to use explore2fs to read them but I cannot access the 74 GB partition only one of the 512MB partitions.
I'm a bit stuck now - any one got any ideas how I can get my files off the 74GB partition before I put them back in the NAS to format.
View 1 Replies
View Related
Mar 24, 2009
How can I access shared Windows files from a fedora system
View 3 Replies
View Related
Aug 13, 2010
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies
View Related
Nov 27, 2010
In my windows machine I have some txt files. I want run a script or command daily to get those file to my linux box using cron job.
Windows (192.168.1.5)
d:
ecords est.txt
to
Linux (192.168.1.
/data
I want to run that script in my linux box every day at 10.30 AM using cron job to get those files from windows to linux.
View 1 Replies
View Related
Aug 29, 2009
how do I view files saved under windows internet explorer in linux. have tried mozilla firefox and here is what I get. is it possible to view the files as displayed in ie?
m: <Saved by Microsoft Internet Explorer 5>
Subject: installing rpm without yum no internet yet - FedoraForum.org
Date: Tue, 25 Aug 2009 00:23:04 -0400
MIME-Version: 1.0
[Code].....
also don't have internet access under linux as yet. wh at modem would you guys recommend that you know will work with linux? using dual boot ibm with windows xp h ome and linux 10
View 2 Replies
View Related
Nov 19, 2009
There is explore2fs, but it does not support ext4 filesystem.
View 1 Replies
View Related
Dec 2, 2010
I'm trying to view my files in my windows XP partition and I tried the following with no success:
1. updated /etc/fstab to include the following line:
/dev/sda1 /mnt/win ntfs-3g defaults 0 0
2. tried this command to mount sda1:
mount -t ntfs-3g /dev/sda1 /mnt/win (got an error message saying no such file or directory)
Here's what Fdisk shows:
Device Boot Start End Blocks Id System
/dev/sda1 * 581 8924 67023180 7 HPFS/NTFS
/dev/sda2 1 580 4658818+ b W95 FAT32
/dev/sda3 8925 8988 512000 83 Linux
/dev/sda4 8988 19458 84096000 5 Extended
/dev/sda5 8988 19458 84094976 8e Linux LVM
Since I'm pretty green at Linux, this is all I know how to do (for now). Isn't there a way for Fedora to auto mount these devices when it boots up?
View 2 Replies
View Related
May 29, 2011
I am trying to access my Windows 7 files from Fedora 15. can view the Windows network from Linux and it displays the laptop fine. I can view the folders on the Windows 7 laptop but I can't access/open them. I receive an 'Unable to mount file' message in Linux. I have Samba installed and running fine. Is there something I have to change in the Linux firewall or samba.conf?
View 7 Replies
View Related
Feb 14, 2010
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
View 9 Replies
View Related
Sep 1, 2011
I am trying to both access files shared by Windows machines on my network, and I also want to share files on my Fedora 15 box. In Nautilus, if I choose the 'Browse Network' option on the left toolbar, I am shown a Windows Network icon. If I try to double click this, I am given an "Unable to mount location" error. Does anyone know why this is and how to fix it? Further, where is the GNOME 3 option to right click and choose to share a folder? Both KDE 4.5/4.6 and older versions of GNOME (at least on Ubuntu) had this. Is there a way to share files this way, and if not, is there some workaround?
View 2 Replies
View Related
May 1, 2011
I keep getting this error in my log viewer every 2 seconds: Code: ata4: limiting SATA link speed to 1.5 Gbps I have a dual boot SSD and I have run many SMART tests in windows and linux, (using smartmon tools and the disk utility) and the reports are all 100% healthy..... My research shows that this error represents one of the following:
1. Problem with SATA controller
2. Changing BIOS to allow SATA
3. Changing SATA mode to PATA or AHCI
4. Replacing the SATA cable
5. Allowing the SSD to run at SATA II speeds, i.e. 3 Gbps
- Does anyone know how to try number 5, i.e. allowing the SSD to run at SATA II speeds? I am lost here and this problem has caused my machine to crash twice when watching a movie in linux/ ubuntu. (It is worth noting that the crashes have only occurred in linux and I have never had an issue in windows, so it does seem to be a linux setting somewhere, hence why I think it is a "allowing SATA II to run at correct speeds issue")
View 4 Replies
View Related
Feb 21, 2009
i need to access the shared files of computes with windows on it.i have fedora 8 on my machine..our computers are on the same network of the office...how do i access my friend's shared file.??
View 2 Replies
View Related
