I was told fedora is great operating system but all i run is into trouble, hours spend on searching for solutions and never get an easy answer as it is on Leopard or even windows 7.What's my problem. I installed a new dvd copy of fedora13, and now connected 2 USB hard drives that seem to connect fine, can access everything but if i try to copy files to one of the drives it says i don't have permissions, and the fields to change permissions access are blank.
I do have an Ubuntu Headless server which is running Samba on it. My mp3 file collection resides on that server on is being share.
So far, no problems connecting to that drive and writing from my Windows box on that share. But if I use my main laptop, which runs Ubuntu Lucid and download an mp3 song from Amazon, the moment I move that to the share, I got permissions problems from the Windows machine. This is clearly a permission issue with group and others; the song is being created on the share without read and write permissions to others or the samba group I created.
My question is. How can I make this process simple or automatic, when moving songs to the share? I don't want to go there everytime and run ...
Code:
Which was basically how I reset or fixed the problem.
I've read about umask, but not sure if that applies here or not, because I'm not creating the file but moving it.
I've got two external drives that are using ext4 that for whatever reason, I just can't seem to write too. I've changed the permissions on the drives using chmod so the permissions are "drwxrwxrwx". I can even right click within the drive and click "Create New Folder" but then it tells me, "Error while copying to "sdc1". The destination is read-only." I thought the destination permissions were setup so anyone can read/write to the disk? I haven't been using linux that long and have only recently started to feel comfortable to move over all of my stuff to Fedora.
I want to use find and scp to copy files. Is there a way to copy files that have spaces in their names? I know you can add " tags for a single file but can find do that? This is the command that i use:
My Source folder contains 424.8 GB in 502,474 files. My Destination folder was created fresh, and after the copy contains 394.0 GB in 486.514 files. I am running it as grsync with root authority. The only options are to preserve time, permissions, owner and group., and to produce a verose output and transfer progress. There are no exceptions specified to skip any files.
I have run it again to give it a chance to get it right. Same result. The source is in an rsnapshot folder, but this is the first backup, the original, containing only whole files, not links.
Why system lags so much while working with a lot of files or with big files (copying them, erasing)? How it can be solved? I am running Fedora 12 x86_64 with ext4 filesystem
I have a saved a .c file on my department computer and i am able to access it through my computer via SSH. BUT I WANT TO copy and paste it into my system.
I have a server with RedHat distro which stores and updates someg files and second computer with Windows 7 on it. I must configure both machines so one can get those files from server to Win7 machine using ssh. But I have no idea how to do it.
I have installed Windows XP with Virtual Machine Manager. The question is how do I access files on my primary linux system? Also can I mount a NTFS partition in my Virtual Machine
I accidentally wiped my 120GB external hardrive clean ( it was at about 95% capacity ) and I was able to recover 111.80GB back using ddrescue and all of those files now sit in a Recovery.img file.
1 ) I know I have to mount this file... yet every time I try to mount it back on my external HD permissions jump down my neck, and to add to it when I try to give my user full permissions for that drive it never works and resets to how it was.
2 )I have tried copying to .img to my drive so I could jsut worry about it later and free up some local HD space yet I don't have those permissions as well...
copying permissions from one file to another.I know that command for changing permission is "chmod", for example chmod 666 filename However, I have one file filename1 and by listing all contents of a directory with ls -al I can find out its permissions in form -rwwx and similar. Now I want to define exact same permissions to other file "filename2". How to use chmod command to accomplish this. Other way around would be to simply copy permissions from one file to another. Is there any command for this purpose?
I booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:
Code: Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075 Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0
I currently have three hard drives: (2) 150GB IDE drives (windows) and (1) 500GB SATA drive (fedora13). I'm trying to move files on the IDE drives to the SATA drive so that I only need the SATA drive. The SATA drive is running Fedora 13 and the other two were old NTFS drives that I just use for space now. So most of the files copied fine, however, for a handful of them I receive the following error:Error splicing file: Value too large for defined data type This happens when I try to copy files not only from drive to drive, but even from folder to folder on the same drive. I've read about a 2GB file size limit, but none of the files are that size. I have no idea why this is happening.
I ssh into a ubuntu box with username "ubuntu" and I can become root without entering a password via "sudo su". How can I scp files onto this box using the ubuntu@ username? It does not allow me to do so using root@. The error is:scp: /etc/: Permission denied.
I just bought a HP 3085dx laptop with an intel 5100 agn wireless card. The problem: copying a big file over the wireless to a gigabit hardwired to the router computer only gives an average 3.5MB/Second transfer rate. If I do the same copy from my wireless-n macbook pro to the same computer. I get a transfer rate of about 11MB/sec. Why the big difference? I noticed the HP always connects to the 2.4 GHZ band instead of the 5GHZ bands...
[jerry@bigbox ~]$ iwconfig wlan0 wlan0 IEEE 802.11abgn ESSID:"<censored>" Mode: Managed Frequency:2.412 GHz Access Point: 00:24:36:A7:27:A3 Bit Rate=0 kb/s Tx-Power=15 dBm Retry long limit: 7 RTS thr: off Fragment thr:off Power Management: off Link Quality=70/70 Signal level=-8 dBm Noise level=-87 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not getting any errors. I don't know why the bit rate is not known. My airport extreme base station typically reports that the 'rate' for the hp is typically 250~300MBi and about the same for the MacBook Pro. The hp is about 6 inchs away from the base station. Is there anyway to get the rascal to go mo'faster? Is there anyway to get the rascal to use the 5GHZ band.
I've tried to copy my files from Xamp httdocs in windows to /var/www/html,but I can't paste the file, what should I do so I can paste the files ?I have logged in as a root
My samba-shares are mounted in fstab. Everything works fine except for one small issue: when copying files from the local PC to the share the files are copied but the timestamps and permissions of the files are not. Instead a message "operation not permitted" appears. 'root' on the client can copy files WITH timestamp etc, a normal user cannot.
Below the line in fstab on the client and smb.conf on the server.
I'm trying to extract all files permissions and write them in a text file in order to use regular expression(using python) and search for world writeable files
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
I've built a custom livecd. On my cd files like /lib*/dbus-1/dbus-daemon-launch-helper are owned by bin not root and the rws is rwx on the owner permission.
With F11 installed Apache is having permissions issues reading files out of the html directory. Only wants to work with permissions set to read for other. [Thu Jun 11 23:25:28 2009] [error] [client 127.0.0.1] (13)Permission denied: file permissions deny server access: /var/www/html/index.html Tracked down the permissions issue. Is there a good reason not to change the group to apache and remove world read?
I have a partition that I mount as /data on all of my distros of my multi-boot machine. I am having a bear of a time figuring the right way to address permissions/groups so that any distro can use it (or any removable drive).I tried (in linuxmint) making a group '/data' and assigning the users on my machine to that group, then changing the permissions/groups of the files and folders in that mount as belonging to the /data group, then booted to fedora 15, made the /data group, added the users to that group, I'm not sure that this way will work (it doesn't seem to) or if it's the best way to proceed. some of the things I don't get are:what is the '1000' user and group?is the user/group info on (in or somehow attached) the mount itself?does this seem like a good way to do this?is there on way to 'apply permissions to enclosed files' recursively through the nautilus context menu?
the permissions for my home directory were accidentally changed from 'access files' to 'create and delete files', and I changed them back, but ever since then I am not able to change any preferences/settings at all. power management, themes, panels, emerald, anything. my user account is supposed to be the administrator, and all the user privliges are checked. how to get control of my computer back?
when I try to copy files from ftp server, at some moment speed falls to 0, i recive message "copy stalled" and my system frozen.I used Opensuse 11.2 (kernel linux 2.6.31). Some people advise me to upgrade the kernel. I upgraded it to linux-2.6.34, but it did not fixe a problem.Copying from ftp is very important for me, i like opensuse, but if i will not fixe this problem, i will must to change the OS.
I need to copy some files from an OpenBSD 4.5 server to my Ubuntu set up via flash disk tell me what commands to enter on each in order to do this please? I believe OpenBSD is UFS and I'm running 9.10 so Ubuntu is ext4
I am trying to copy files across a network using terminal. i know this is possible but i can't find a way. but i can paste smb://xxx.xxx.xxx.xxx/myfolder in the address bar in a folder and navigate to the correct area.is there some other way i can do this?
I had to leave rather suddenly (decision was Germany's, not fiancee's), and now am in the States again, but my files are still there. There are lots of things (mainly photos) on there, that I would like to have here. SOME stuff is on CD/DVD, but there is stuff that isn't.
Is there some way that I could access her computer and just copy files to mine? (I picture two folders, one on hers, one on mine, and I just dragging an icon from one to the other - but I don't suppose anything's THAT easy...)
Naturally, her computer would have to be on, and I assume she could not be using it herself. Naturally also, I would get her permission first...
I assume that it would take a while, but if it were as simple as the icon thing I described above, then I could just go away and come back later. I assume something would be running to make sure that the destination file and source file were identical before proceeding to the next file.
[Before you suggest: why doesn't she just copy the files to DVD's and mail them to me? She is not all that computer saavy, I'm afraid, and trying to explain it all, including the exact folder names and such, Plus, how to use a DVD/CD burner and software... Plus translate it all into German... If I were rich enough, I could just go there and do what I needed, but that is not in the cards for the present. ]
IS there a way to copy stuff from her computer to mine?
I have a new network attached storage unit that I'm trying to transfer my data to. On this NAS, it has a very basic linux installed with SSH enabled. Browsing through the programs installed on it, i found smbclient. Am I able to copy files directly from my old NAS to my new one using smbclient?It would sure beat transfering 950GB from my old NAS through a computer then onto my new NAS.
