I want to use find and scp to copy files. Is there a way to copy files that have spaces in their names? I know you can add " tags for a single file but can find do that? This is the command that i use:
scp $(find -iname "*.avi") destination
I was told fedora is great operating system but all i run is into trouble, hours spend on searching for solutions and never get an easy answer as it is on Leopard or even windows 7.What's my problem. I installed a new dvd copy of fedora13, and now connected 2 USB hard drives that seem to connect fine, can access everything but if i try to copy files to one of the drives it says i don't have permissions, and the fields to change permissions access are blank.
View 1 Replies View RelatedMy Source folder contains 424.8 GB in 502,474 files. My Destination folder was created fresh, and after the copy contains 394.0 GB in 486.514 files. I am running it as grsync with root authority. The only options are to preserve time, permissions, owner and group., and to produce a verose output and transfer progress. There are no exceptions specified to skip any files.
The rsync command is this:
rsync -r -t -p -o -g -v --progress -c -l -H -D -s /mnt/Backups/monthly.3/ /mnt/EX-Fantom/monthly.3/
I have run it again to give it a chance to get it right. Same result. The source is in an rsnapshot folder, but this is the first backup, the original, containing only whole files, not links.
Why system lags so much while working with a lot of files or with big files (copying them, erasing)? How it can be solved? I am running Fedora 12 x86_64 with ext4 filesystem
View 14 Replies View RelatedI have a saved a .c file on my department computer and i am able to access it through my computer via SSH. BUT I WANT TO copy and paste it into my system.
View 3 Replies View RelatedI have a server with RedHat distro which stores and updates someg files and second computer with Windows 7 on it. I must configure both machines so one can get those files from server to Win7 machine using ssh. But I have no idea how to do it.
View 3 Replies View RelatedI have installed Windows XP with Virtual Machine Manager. The question is how do I access files on my primary linux system? Also can I mount a NTFS partition in my Virtual Machine
View 14 Replies View RelatedI booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:
Code:
Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075
Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0
[code]....
host A: Fedora 7 has bind 9.4.2
host B: Fedora 11 has bind 9.6.1
I want to migrate my bind configuration from A to B I've read the release notes and man pages and I can't see why copying
/etc/named*
and
/var/named/*
I checked /etc/sysconfig/named too... Seems to have no effect on my brand new install on Fedora 11. Host B stays basically un-configured.
I currently have three hard drives: (2) 150GB IDE drives (windows) and (1) 500GB SATA drive (fedora13). I'm trying to move files on the IDE drives to the SATA drive so that I only need the SATA drive. The SATA drive is running Fedora 13 and the other two were old NTFS drives that I just use for space now. So most of the files copied fine, however, for a handful of them I receive the following error:Error splicing file: Value too large for defined data type This happens when I try to copy files not only from drive to drive, but even from folder to folder on the same drive. I've read about a 2GB file size limit, but none of the files are that size. I have no idea why this is happening.
View 5 Replies View Relatedshell scripting in Fedora14I want a script"Find in curent folder for files, and it copy first file he find with name gived by user, if name already exist then echo error message and finish"command usage " bash scriptname copyASname"
smthing like Code: #!/bin/bash
for files in /home/user/*
do
[code]....
I just bought a HP 3085dx laptop with an intel 5100 agn wireless card.
The problem: copying a big file over the wireless to a gigabit hardwired to the router computer only gives an average 3.5MB/Second transfer rate. If I do the same copy from my wireless-n macbook pro to the same computer. I get a transfer rate of about 11MB/sec. Why the big difference? I noticed the HP always connects to the 2.4 GHZ band instead of the 5GHZ bands...
On the HPL
[jerry@bigbox ~]$ ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:246:36:AC4
inet addr:192.168.1.75 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:d6ff:fe36:acc4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:639243 errors:0 dropped:0 overruns:0 frame:0
TX packets:1293049 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:53832795 (51.3 MiB) TX bytes:1888619922 (1.7 GiB)
[jerry@bigbox ~]$ iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:"<censored>"
Mode: Managed Frequency:2.412 GHz
Access Point: 00:24:36:A7:27:A3
Bit Rate=0 kb/s Tx-Power=15 dBm
Retry long limit: 7 RTS thr: off Fragment thr:off
Power Management: off
Link Quality=70/70 Signal level=-8 dBm Noise level=-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not getting any errors. I don't know why the bit rate is not known. My airport extreme base station typically reports that the 'rate' for the hp is typically 250~300MBi and about the same for the MacBook Pro. The hp is about 6 inchs away from the base station. Is there anyway to get the rascal to go mo'faster? Is there anyway to get the rascal to use the 5GHZ band.
I've tried to copy my files from Xamp httdocs in windows to /var/www/html,but I can't paste the file, what should I do so I can paste the files ?I have logged in as a root
View 5 Replies View RelatedI've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
when I try to copy files from ftp server, at some moment speed falls to 0, i recive message "copy stalled" and my system frozen.I used Opensuse 11.2 (kernel linux 2.6.31). Some people advise me to upgrade the kernel. I upgraded it to linux-2.6.34, but it did not fixe a problem.Copying from ftp is very important for me, i like opensuse, but if i will not fixe this problem, i will must to change the OS.
View 5 Replies View RelatedI need to copy some files from an OpenBSD 4.5 server to my Ubuntu set up via flash disk tell me what commands to enter on each in order to do this please? I believe OpenBSD is UFS and I'm running 9.10 so Ubuntu is ext4
View 9 Replies View RelatedI am trying to copy files across a network using terminal. i know this is possible but i can't find a way. but i can paste smb://xxx.xxx.xxx.xxx/myfolder in the address bar in a folder and navigate to the correct area.is there some other way i can do this?
View 8 Replies View RelatedI had to leave rather suddenly (decision was Germany's, not fiancee's), and now am in the States again, but my files are still there. There are lots of things (mainly photos) on there, that I would like to have here. SOME stuff is on CD/DVD, but there is stuff that isn't.
Is there some way that I could access her computer and just copy files to mine?
(I picture two folders, one on hers, one on mine, and I just dragging an icon from one to the other - but I don't suppose anything's THAT easy...)
Naturally, her computer would have to be on, and I assume she could not be using it herself. Naturally also, I would get her permission first...
I assume that it would take a while, but if it were as simple as the icon thing I described above, then I could just go away and come back later. I assume something would be running to make sure that the destination file and source file were identical before proceeding to the next file.
[Before you suggest: why doesn't she just copy the files to DVD's and mail them to me? She is not all that computer saavy, I'm afraid, and trying to explain it all, including the exact folder names and such, Plus, how to use a DVD/CD burner and software... Plus translate it all into German... If I were rich enough, I could just go there and do what I needed, but that is not in the cards for the present. ]
IS there a way to copy stuff from her computer to mine?
I have a new network attached storage unit that I'm trying to transfer my data to. On this NAS, it has a very basic linux installed with SSH enabled. Browsing through the programs installed on it, i found smbclient. Am I able to copy files directly from my old NAS to my new one using smbclient?It would sure beat transfering 950GB from my old NAS through a computer then onto my new NAS.
View 1 Replies View RelatedWhile copying a large amount of data between two linux computers I noticed strange behaviour. The network card activity (computer copying the files) would be dormant for 30 second to a minute and then flash rapidly for just 5 second or so. This repeated for the duration of the copying progress (approx 2 hours at a supposedly constant 5-7MB/s).
The share that I was copying to was via SSH using "connect to server" from the GNOME menu. I was expecting the see the network card activity light constantly flash. I wondered if someone could explain this strange behaviour that I have witnessed.
How can I copy some files from a windows machine to Linux machine ?
View 13 Replies View RelatedI am running openSUSE 11.2 KDE 4.3.4 on my ThinkPad R51 laptop.I would like to copy 'File A, File B, File C' (for example) that has photographs of a holiday , to a blank CD inserted into my drive and cannot find a way to 'copy and paste' into the volume.
View 3 Replies View Relatedi have some files on my server that i can not rename or copy it seems file names are some how strange for linux (centos)the names are like this way :
Spirited.Away.2001.HDRip_-_(Film98-Net).mkv
Up.2009.BRrip_-_(Film98-Net).mkv
How.To.Train.Your.Dragon.2010.720p.Bluray_-_(Film98-Net).mkv
[code]...
I'm running squeeze on i686, my last update was this morning (9/9/2010). Running the stock kernel 2.6.32-5-686
My PC keeps crashing when copying files. The monitor displays the desktop, but the mouse doesn't move, nothing responds and I can't even ssh in to debug it.
This happens when copying files using nautilus and the command line. I'm trying to copy files from my local hard disk to an nfs drive which is mounted in my system and has been working fine for years.
how to debug this after a hard reboot?
This has only just started happening, last night was the first time.
I've observed that if I copy a directory containing some files to an USB stick, files whose names are all upper-case are copied with all lowercase names. Is this expected behavior? The USB stick is shared with a Windows box.
View 13 Replies View RelatedDuring my backups I'm finding that rsync is copying all files, instead of just what's changed.
I'm rsyncing between 2 USB external hard drives. One hard drive is FAT32 and one is NTFS. I've examined some of the files and believe that the difference is that there's a 1-second modtime difference developing in some of the files somehow.
Here's an example. These duplicity files were synced from /media/BACKUPHD (the NTFS drive) to /media/VIDEOHD (the FAT32 drive) only a few hours ago this morning. They have not been touched or changed since then, but that 1-second difference in their time stamps has appeared:
Code:
tim@localhost:~> stat /media/BACKUPHD/backups/duplicity/duplicity-full.20110107T145955Z.vol10.difftar.gpg File: `/media/BACKUPHD/backups/duplicity/duplicity-full.20110107T145955Z.vol10.difftar.gpg'
[Code]....
I just read the Linux scp command issue question and it reminded me that I regularily forget to specify the colon in the host part of a scp command, and thus copying a file locally instead of copying to a remote host, e.g. I do
scp foo host
instead of
scp foo host:
But I never use scp to copy a file locally. So I wonder if there is a way to make scp fail if both (the source and destination) arguments refer to local files.
i am accessing linux through putty and i wrote somany programs in unix using putty and gedit but now i need to copy all files into windows. how to copy directory(linux) to folder(windows) without installing any softwares?If it is necessary to install software to copy files then tell me the process of using that software.
View 5 Replies View RelatedI need to copy ~300GB of drives from one Windows hard drive to another using a Ubuntu live CD. (I currently don't have enough power connectors for my Windows system drive AND both existing and new data drives. Stupid power supply.)
By Windows drive, I mean the drives are only data drive (no Windows install) but the files on the first drive were created and are used by my Windows system, both were formatted NTFS in Windows, and the files will again be used by Windows on the second drive.
Are there any pitfalls I need to be aware of, or can I literally just drag the files across in Nautilus? Is there a faster copy utility available (I know there are Windows programs that can copy faster than drag-n-drop, but I'm sure Ubu doesn't have the same problem ) Will using a Live CD cause any specific issues?
I want to search a Windows partition for all .doc and .xls files and move them over to Xubuntu to burn them to CD.
Is this easiest to do via terminal? I tried to use catfish and select all files, but I think my Mac keyboard (and USA standard keyboard settings) threw the select all files ability.
