Fedora Networking :: Copying SSH Files Into Computer?
Jul 18, 2010I have a saved a .c file on my department computer and i am able to access it through my computer via SSH. BUT I WANT TO copy and paste it into my system.
View 3 Replies
ADVERTISEMENT
Ubuntu :: Copying Files From A Hard Drive Using Another Computer?
Aug 4, 2010I got a problem with the motherboard of my computer and now I need to get some files out from the hard drive (an ext3 partition). I can access the files from another computer but because of the permissions of my user it doesn't let me copy the files over to another drive.
my computer was running Kubuntu 8.10 with a Vista dualboot. I also tried attaching the hard drive to another laptop, but because of the video drivers the display doesn't function properly.
Networking :: Copying /var/named Files From Fedora 7 To Fedora 11 Does Not Configure Bind?
Aug 12, 2009host A: Fedora 7 has bind 9.4.2
host B: Fedora 11 has bind 9.6.1
I want to migrate my bind configuration from A to B I've read the release notes and man pages and I can't see why copying
/etc/named*
and
/var/named/*
I checked /etc/sysconfig/named too... Seems to have no effect on my brand new install on Fedora 11. Host B stays basically un-configured.
Fedora :: Copying All Of .wine To Another Computer?
Jan 12, 2011I've lost some install disks which cannot be replaced and need to copy my entire /home/username/.wine to my laptop.
I already have installed wine on the laptop and it is the same version of Fedora (14) as is on my desktop.
Is it possible to mass copy the entire desktop /home/username/.wine, and copy it onto the laptop?
Do I do the copy as user or as root? I need to get everything, the system files registery and ProgramFiles etc. and then copy it on to the lap top with exactly the same permissions.
So I would, for example, type tar -zvcp allWine.tgz /home/username/.wine/*.*
Networking :: Copying Files Over A Network
Jan 8, 2010While copying a large amount of data between two linux computers I noticed strange behaviour. The network card activity (computer copying the files) would be dormant for 30 second to a minute and then flash rapidly for just 5 second or so. This repeated for the duration of the copying progress (approx 2 hours at a supposedly constant 5-7MB/s).
The share that I was copying to was via SSH using "connect to server" from the GNOME menu. I was expecting the see the network card activity light constantly flash. I wondered if someone could explain this strange behaviour that I have witnessed.
Ubuntu Networking :: Copying Thunderbird Files To Another Machine?
Apr 13, 2010Copying my Thunderbird files to another machine
Two questions:
1. Can I copy xx.default to DVD, its 1.5GB in size, and then merge it into the xx.default of the other machine or try and connect through a crossover cable. I tried to copy onto a flash drive but it did not recognize Inbox.sbd as a folder.
2. How do I manager the existing files in the receiving machine, it has an existing mail account.
Ubuntu Networking :: Backup Software Not Copying Files?
Apr 17, 2010Having trouble running backup software to network storage. (Ubuntu 10.04 Beta)
I mounted my network drive (a Netgear Stora) with curlftps (tried several other ways, but this is the only way that works). It shows up like a regular HDD which I can copy files to in the file manager, but when I try running backup software only the folders are copied.
I've tried several backup programs, some based on Rsync, as well as Rsync itself, but they all had problems. Dj Dup kind of worked and was able to copy files (archives), but kept dropping the ethernet connection instead.
Fedora :: Copying Files Using Scp And Find?
Aug 29, 2010I want to use find and scp to copy files. Is there a way to copy files that have spaces in their names? I know you can add " tags for a single file but can find do that? This is the command that i use:
scp $(find -iname "*.avi") destination
Fedora :: Copying Files-No Permissions?
Oct 30, 2010I was told fedora is great operating system but all i run is into trouble, hours spend on searching for solutions and never get an easy answer as it is on Leopard or even windows 7.What's my problem. I installed a new dvd copy of fedora13, and now connected 2 USB hard drives that seem to connect fine, can access everything but if i try to copy files to one of the drives it says i don't have permissions, and the fields to change permissions access are blank.
View 1 Replies View RelatedFedora :: Rsync Not Copying All Files?
Sep 9, 2011My Source folder contains 424.8 GB in 502,474 files. My Destination folder was created fresh, and after the copy contains 394.0 GB in 486.514 files. I am running it as grsync with root authority. The only options are to preserve time, permissions, owner and group., and to produce a verose output and transfer progress. There are no exceptions specified to skip any files.
The rsync command is this:
rsync -r -t -p -o -g -v --progress -c -l -H -D -s /mnt/Backups/monthly.3/ /mnt/EX-Fantom/monthly.3/
I have run it again to give it a chance to get it right. Same result. The source is in an rsnapshot folder, but this is the first backup, the original, containing only whole files, not links.
Networking :: Bizarre - Copying Files To An NFS Share On The Microserver Is Very Slow
Apr 21, 2011I am running Ubuntu 10.10 on my workstation and have Ubuntu Server 10.10 installed on a HP Proliant MicroServer. A NFS share is configured on the MicroServer and successfully mounts from workstation PC/ Ubuntu 10.10 The issues: Copying files to an NFS share on the microserver is very, very slow. Whilst files copied to the NFS share are visible to the workstation, they don't appear when using 'ls' on the server. despite the folder owner/ user account on the Microserver and the workstation having the same name and sharing the same UID & GID (1000), copies made from the workstation have a different UID & GID
[Code]....
Networking :: Identify Which Infected Desktop Is Copying Files To NFS Share?
May 18, 2011I have iomega appliance, which is based on Debian distribution. There is an NFS share that I have created which is without password.Since it is without password, there are some viruses copied. I want to find out which IP address is the source of these files. In other words, I want to know which PC is copying these infected files on the NFS share.
View 3 Replies View RelatedFedora :: System Lags While Copying Big Files
Mar 16, 2010Why system lags so much while working with a lot of files or with big files (copying them, erasing)? How it can be solved? I am running Fedora 12 x86_64 with ext4 filesystem
View 14 Replies View RelatedFedora Servers :: Copying Log Files From Server Using Ssh?
Aug 12, 2010I have a server with RedHat distro which stores and updates someg files and second computer with Windows 7 on it. I must configure both machines so one can get those files from server to Win7 machine using ssh. But I have no idea how to do it.
View 3 Replies View RelatedFedora :: Copying Files To And From Virtual Machine?
Mar 11, 2011I have installed Windows XP with Virtual Machine Manager. The question is how do I access files on my primary linux system? Also can I mount a NTFS partition in my Virtual Machine
View 14 Replies View RelatedUbuntu Networking :: NFS - Slow Write Speed And Copying Files In Nautilus
Jul 6, 2010I just tried NFS for the first time after reading that it's considerably faster than SSHFS, which I currently use, but I'm experiencing slow write speeds and problems while copying files in nautilus.
[Code]...
Fedora :: Input/output Error When Copying Files To Fedora Live CD?
Dec 21, 2010I booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:
Code:
Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075
Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0
[code]....
Fedora :: Copying Files Between Sata (fedora 13) And Ide (windows)?
Dec 30, 2010I currently have three hard drives: (2) 150GB IDE drives (windows) and (1) 500GB SATA drive (fedora13). I'm trying to move files on the IDE drives to the SATA drive so that I only need the SATA drive. The SATA drive is running Fedora 13 and the other two were old NTFS drives that I just use for space now. So most of the files copied fine, however, for a handful of them I receive the following error:Error splicing file: Value too large for defined data type This happens when I try to copy files not only from drive to drive, but even from folder to folder on the same drive. I've read about a 2GB file size limit, but none of the files are that size. I have no idea why this is happening.
View 5 Replies View RelatedFedora Hardware :: Low Transfer Rate When Copying Large Files Over Wireless
Jan 11, 2010I just bought a HP 3085dx laptop with an intel 5100 agn wireless card.
The problem: copying a big file over the wireless to a gigabit hardwired to the router computer only gives an average 3.5MB/Second transfer rate. If I do the same copy from my wireless-n macbook pro to the same computer. I get a transfer rate of about 11MB/sec. Why the big difference? I noticed the HP always connects to the 2.4 GHZ band instead of the 5GHZ bands...
On the HPL
[jerry@bigbox ~]$ ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:246:36:AC4
inet addr:192.168.1.75 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:d6ff:fe36:acc4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:639243 errors:0 dropped:0 overruns:0 frame:0
TX packets:1293049 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:53832795 (51.3 MiB) TX bytes:1888619922 (1.7 GiB)
[jerry@bigbox ~]$ iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:"<censored>"
Mode: Managed Frequency:2.412 GHz
Access Point: 00:24:36:A7:27:A3
Bit Rate=0 kb/s Tx-Power=15 dBm
Retry long limit: 7 RTS thr: off Fragment thr:off
Power Management: off
Link Quality=70/70 Signal level=-8 dBm Noise level=-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not getting any errors. I don't know why the bit rate is not known. My airport extreme base station typically reports that the 'rate' for the hp is typically 250~300MBi and about the same for the MacBook Pro. The hp is about 6 inchs away from the base station. Is there anyway to get the rascal to go mo'faster? Is there anyway to get the rascal to use the 5GHZ band.
Fedora :: Copying Files On Fedora Apache?
Aug 3, 2009I've tried to copy my files from Xamp httdocs in windows to /var/www/html,but I can't paste the file, what should I do so I can paste the files ?I have logged in as a root
View 5 Replies View RelatedUbuntu Installation :: Copying Everything To A New Computer?
Apr 6, 2011I have config settings on one computer that I like (spent a lot of time writing up easystroke commands, rating songs in Banshee, saving a bunch of wireless network configurations... etc etc.)
So much stuff that I might just like to copy my entire harddrive and all of my folders to an external hard drive and then replace everything on my new computer from there.
Ubuntu Installation :: Copying Repositories From A Computer To Another?
Feb 12, 2011I'm using Ubuntu Maverick
On my university, the technology center uses the Ubuntu 10.04 LTS. I've been told by my teacher to get GCC for the C language. Searching for GCC on my netbook, I can find two programs: Sysinfo (why?) GGcov (doesn't open) Searching for GCC on the TC Computer, I can find 115 programs... The administrator wasn't there at the moment I checked this, and he'll not be there on this weekend so... I would like to do this by myself tomorrow. With my vast one-week experience with ubuntu, I think such software abundance from the TC computer side is related to repositories. I would like to copy them all to my netbook, if it's possible.
OpenSUSE :: Dolphin Losing Files When Copying Many Files Or Large Folders?
Feb 14, 2010I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
General :: Copying A File As Root Through An Intermediate Computer?
Jul 23, 2010I am trying to copy four files from my machine, through a second machine, and finally to the destination. The destination computer can only be reached through the second computer, and I am curious to know if there is an easy way to do this. I am able to ssh to the middle machine and then ssh from there to the destination. I know that I could just copy from the first machine to the second, and then from there to the third. I guess that I'm curious to know what kind of command I can run to do this all at once or even if I could do such a thing (which I'm betting I can). I need to copy these files as root on the destination machine too.
View 6 Replies View RelatedFedora Networking :: Copying Authorization Keys?
Dec 12, 2010Using SSH all the time on my home network. I use ssh-keygen and ssh-copy-id to generate and then copy the key file. On one of my computers I've changed the default ssh port and see no way to copy the key without reverting the configuration to port 22 temporarily. This is not a big deal and would probably take less time than it has taken me to type this message.
View 3 Replies View RelatedNetworking :: Copying Files With Scp - From A Network To Another Network
May 5, 2011I have a debian box, a.ces.school.edu, in my lab and my laptop also runs debian (on another DHCP lan home network outside school). I can access my lab's debian computer from outside school only by first ssh-ing to a server setup by the school - access.ces.school.edu, and then, from the server ssh-ing to my lab computer. That works fine and I can view all my files on my lab computer from home.
But, I would like to copy some files from my lab computer to my home computer. With scp, I know how to do that if I could connect directly with my school computer. In the present scenario, I can't figure out how to copy files.
Does anyone know how this can be done?
Networking :: Access Computer Files From IPad?
Jun 12, 2011I'm not familiar at all with the networking functions of linux systems, but I just bought an iPad, and I want to store all my movies, music, and documents on my computer at home, and access them from my iPad. I've heard a VNC client is the best way to go. But will this allow me full access, or just to view the screen? Will I be able to watch movies at the highest framerate with this method?
View 3 Replies View RelatedUbuntu Networking :: Saving Files To Networked Computer
Jan 14, 2010If I DL something from the Internet It askes were to save. This is normal however even though my 2 computers are nicely networked I can't seem to navigate to the network to save onto the other computer.
View 6 Replies View RelatedUbuntu Networking :: Having A Music Player Play Files From Another Networked Computer?
Aug 16, 2010i don't have much space on my individual computers, so i have to keep my music files on my laptop with most of everything else on my PC. i want to have rhythmbox play music from my networked laptop, but i have a few issues.
for one, my laptop doesn't show up in Places --> Network
two, even if it did. i'm not exactly sure how i could get rhythmbox to do that. would i have to use SSH? connect everytime?
Fedora Servers :: Transfer Files From Computer - Run Program?
Aug 25, 2011I have recently rented a server which is running Ubuntu linux. I can connect to it through ssh. I've written a Java application that I would like to run on the server 24/7. How do I transfer the files from my computer to the server so I can run the program from the server?
View 11 Replies View Related