OpenSUSE :: Dolphin Losing Files When Copying Many Files Or Large Folders?
Feb 14, 2010
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
View 9 Replies
ADVERTISEMENT
May 10, 2015
When I am copying from DVD to my comp - Dolphin copies some files and directories and some did not. I have to check what was copied and what was ommited and fix the bad copying by copying again. The DVD is okay, it is perfectly readable. There is also plenty of memory around (8 GB). The behavior is new in Jessie, Dolphin in Wheezy used to work flawlessly.
I have met this strange behavior after copying archived data to my new Debian installation. The copyings were "huge tasks", for example 2000 files, more than 1GB total. "Small tasks" seem to copy okay. Nevertheless, the danger or missing files is annoying. What to do?
View 2 Replies
View Related
Feb 10, 2010
I've a directory containing around 2.8 lacs of files. I want to move them to another directory.If I use cp or mv then I get an error 'argument list too long'. If I write a script like
for file in ls *; do
cp {source} to {destination}
done
then because of ls command , its performance degrades.How can I do this?
View 7 Replies
View Related
Mar 15, 2011
I am facing problem in copying a large number of file 18 lakh (18,000,000) files from my personal hardisk to another hardisk each file is very small and size of folder is around 3.95 GB copying files using copy given by Windows is frustrating and I am not even able to compress file its giving me error that its not readable.And problem is I am not able to open this drive in Linux it showing me error there saying do diskchk in Windows and Windows disk check is also not able to repair this drive and goes into some mode unsolvable.Is there any way to open disk with error to open in Windows and if not any way I can copy data faster?ERROR: Disk labled EDU is corrupt go to windows and chkdsk /f there and reboot into window 2 times.
View 3 Replies
View Related
Jan 11, 2010
I just bought a HP 3085dx laptop with an intel 5100 agn wireless card.
The problem: copying a big file over the wireless to a gigabit hardwired to the router computer only gives an average 3.5MB/Second transfer rate. If I do the same copy from my wireless-n macbook pro to the same computer. I get a transfer rate of about 11MB/sec. Why the big difference? I noticed the HP always connects to the 2.4 GHZ band instead of the 5GHZ bands...
On the HPL
[jerry@bigbox ~]$ ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:246:36:AC4
inet addr:192.168.1.75 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:d6ff:fe36:acc4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:639243 errors:0 dropped:0 overruns:0 frame:0
TX packets:1293049 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:53832795 (51.3 MiB) TX bytes:1888619922 (1.7 GiB)
[jerry@bigbox ~]$ iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:"<censored>"
Mode: Managed Frequency:2.412 GHz
Access Point: 00:24:36:A7:27:A3
Bit Rate=0 kb/s Tx-Power=15 dBm
Retry long limit: 7 RTS thr: off Fragment thr:off
Power Management: off
Link Quality=70/70 Signal level=-8 dBm Noise level=-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not getting any errors. I don't know why the bit rate is not known. My airport extreme base station typically reports that the 'rate' for the hp is typically 250~300MBi and about the same for the MacBook Pro. The hp is about 6 inchs away from the base station. Is there anyway to get the rascal to go mo'faster? Is there anyway to get the rascal to use the 5GHZ band.
View 3 Replies
View Related
Jul 13, 2009
For my research I have some very large files that are basically millions of lines of ten columns of numbers. These files can be up to 5 GB in size. Recently I noticed that when I made a copy of one of my files, some exclamation points appeared in it where there should not be any: in front of random numbers throughout the file. Making another copy of the file would result in exclamation points in front of different numbers in different parts of the file. Doing this many times has given me up to four exclamation points in different parts of the file. Sometimes the file copies just fine without producing any extraneous exclamation points.Additionally, I have occasionally seen a "^K" where there should be a newline (the data that should have been on the next line was instead on the previous line with a ^K in front of it) in copies that I have made of my files. I don't know if this is related or not.
View 7 Replies
View Related
Feb 7, 2010
I'm about to move a lot of folders from an older computer (sarge/etch) over to a newer with Lenny. But I get problems when I reach folders or files with names that contains nordic letters like øå. I'm using an external drive to move the folders. What is the easiest and best way to do this.
View 1 Replies
View Related
Jul 27, 2010
I am dual booting XP and Ubuntu 10.04, but in the future I will be getting a new machine and I will only be running Ubuntu and won't have access to iTunes. Because I have an iPod Touch, I have been trying to find workarounds for syncing everything that iTunes took care of in the past. One problem I have is managing movies. I have looked through various media players/iPod management tools (Amarok, Rhythmbox, gtkpod) and I am using Rhythmbox to sync my music and and attempting to use gtkpod to sync my movies.
gtkpod is able to sync songs (Tested with a few minute test clip) and short *.mp4 files (15mb I know for sure from test). I am unable, however, to get it to sync a movie (~700mb) I am able to drag it onto my iPod in gtkpod, but when I try to save the changes and write the files, it hangs at "Copying Tracks" at 0%. It eventually crashes during the couple times I have tried to wait it out. So this being my situation, my question is, is there a size limit to the *.mp4 files I can sync to my iPod Touch via gtkpod? is there any other tools that you know of that I can sync videos to my iPod with?
View 9 Replies
View Related
Mar 23, 2010
openSUSE 11.1, KDE 4.4.1
I'm getting ~/.nfs file being generated and just filling up
Does anyone know the cause - and how to stop it before it fills my HDD?
View 1 Replies
View Related
Jul 23, 2010
How do I edit a file (config file, etc.) in KWrite (instead of VI) from the bash shell?I can't seem to "see" certain files using Dolphin and the only way I can locate/see them is using the shell but I'm a complete VI newb and would rather use KWrite for the moment.
View 8 Replies
View Related
Mar 1, 2010
I can't open files with anything using Dolphin as superuser. For example with Kate:
Code:
KDEinit cannot launch /usr/bin/kate
Also, I can't launch kwrite or kate as root per below:
Code:
john@vostro:~> su
Password:
vostro:/home/john # kate
kate(3007): Session bus not found
[Code]....
View 7 Replies
View Related
Aug 15, 2010
Since I've upgraded to KDE 4.5 on openSUSE 11.3. I am getting some instances of Dolphin hanging or lagging when navigating directories or opening files.
View 9 Replies
View Related
Mar 1, 2011
Is there any way to stop Dolphin from creating .directory files in all my directories when I am viewing hidden files?
I am pressing Alt+. to view hidden files in a directory.
Other file managers seem to do it fine.
View 5 Replies
View Related
Apr 27, 2011
In Dolphin i have build an ssh-Connection to my homeserver. Now when I edit an file, the save to the remote location occures only when the editor is closing.This is for webdevelopment etc. not practical.Which alternatives are possible?(under Windows i love WinSCP )
View 2 Replies
View Related
Dec 1, 2010
on my dell xps M1530 dualcore duo 2.2GHz 4GB ram 500GB harddisk suse 11.3 KDE 4.4 and KDE4.6beta1, when I copy big or a big number of files (20 or 30 files 500MB each) dolphin slow wildly down, especially when I copy from a smb:// to my disk, dolphin start immediately to copy but when I click on a tab or a folder (a one that I didn't opened before) dolphin shows it to me after a couple of minutes, is it possible to solve??
View 9 Replies
View Related
Jun 16, 2011
I am using the diff command with the -r option, to compare a large number of files and files in subdirectories. My main interest is to find out which files have been changed, and not what the actual changes are, and since a lot of files has been changed, it would be a lot easier to view the file names only. Is there and option for diff that might do this, or does there exist a similar tool/command that could do the job?
View 1 Replies
View Related
Jan 20, 2009
I want to automate this using script.How to automate it?
File1:
s.no# 1 name:aaaaaa
city:abcd
[code]...
View 1 Replies
View Related
Nov 3, 2010
Problem is with files greater than 4G onto dual layer or BD disks.mkisofs crashes. I believe the problem to be when this requires udf filesystem and disk does not get written to. As yesterday version is suse11.3 patched to date. k3b writes standard dvd disks ok. I am seeing a lot of searches saying this is because of cdrkit rather than cdrtools, can I replace this easily? Is this the case? Tried setting the k3b options when burning to udf same error. Other searches show k3b has fixed probs with these issues, so appears to point to underlying mkisofs stuff full error log in yesterdays post if it helps. I will also try on ubuntu to see if it works there
View 1 Replies
View Related
Jun 17, 2010
Whenever I go into the folders they're stored in and try to open them. They close so fast, in fact, that it's only after switching over to Konqueror that I found the files simply will not open. VLC/Kaffeine appears to load for a few seconds and then closes again without any indication of a bug or problem - it just doesn't work.
Been trying to sort this out for the last two days now, but I'm a complete simpleton with computers/linux and don't know anything about using the terminal, etc. (I can't even install stuff without using webpins) but now I'm stuck and searching around for people with similar problems really hasn't turned up anything that is familiar or understandable.
View 9 Replies
View Related
May 21, 2010
when I try to copy files from ftp server, at some moment speed falls to 0, i recive message "copy stalled" and my system frozen.I used Opensuse 11.2 (kernel linux 2.6.31). Some people advise me to upgrade the kernel. I upgraded it to linux-2.6.34, but it did not fixe a problem.Copying from ftp is very important for me, i like opensuse, but if i will not fixe this problem, i will must to change the OS.
View 5 Replies
View Related
May 10, 2010
When I copy files from one partition to another, or from one drive to another, the transfer rates hover around 5-8MB/sec which is kind of slow given that all my hard drives are SATA II. I have the same problem when copying either a single file or a group of files.
I'm running openSUSE 11.2 x64 here (KDE 4.3.5) with three SATA II hard drives that are all formatted with ext3. I have dropped to the CLI and used mv and cp instead - this seems to improve things but I shouldn't have to do this.
View 6 Replies
View Related
Apr 18, 2011
All of a sudden, Dolphin is identifying .xls files as "OLE2 compound document storage (application/x-ole-storage)." I searched for xls in Configure desktop, file associations and it still appears as application-vnd.ms-excel. It does not appear as x-ole-storage.
Other spreadsheets (ods, xlsx) are still identified correctly and open automatically in the proper program. This is a new behavior, and I'm assuming it has to do with something I updated in Yast. I'm using KDE 4.6.2 under 11.4.
As a workaround, I added the .xls extension to the file association for x-ole-storage, which allows Dolphin to open the file automatically, but it still asks me to install software to handle the file type. I answer no and then the file opens in Libre Office.
Before adding .xls to the file association, I tried to get this to happen automatically by going through the open with other application menu and checking always use this application. This had no effect.
View 2 Replies
View Related
Jan 11, 2011
During my backups I'm finding that rsync is copying all files, instead of just what's changed.
I'm rsyncing between 2 USB external hard drives. One hard drive is FAT32 and one is NTFS. I've examined some of the files and believe that the difference is that there's a 1-second modtime difference developing in some of the files somehow.
Here's an example. These duplicity files were synced from /media/BACKUPHD (the NTFS drive) to /media/VIDEOHD (the FAT32 drive) only a few hours ago this morning. They have not been touched or changed since then, but that 1-second difference in their time stamps has appeared:
Code:
tim@localhost:~> stat /media/BACKUPHD/backups/duplicity/duplicity-full.20110107T145955Z.vol10.difftar.gpg File: `/media/BACKUPHD/backups/duplicity/duplicity-full.20110107T145955Z.vol10.difftar.gpg'
[Code]....
View 8 Replies
View Related
Nov 2, 2010
I have a problem with burning some disks. I believe the problem to be when the file sizes are large. using suse 11.3 x 64 and updates done. k3b version 2.0.1-1pm 2.7 burned normal dvd yesterday with3.5 Gb + 1.5Gb files. Tried burning to BD-R disk with 11.5 Gb file. I have burned blu ray disks before with my machine but used nero, I would prefer to use k3b as should do this. I get error of mkisofs crashed and following error log
[code]...
View 3 Replies
View Related
Mar 3, 2009
I've been having trouble copying files. When I try to copy something, it starts copying, and after a few GB, I suddenly get an error. It tells me its unable to write to the disk. After this, the only way to be able to write to the disk again, is to reboot the system. I then get to copy a few more files before the same error appears. The partition in question is formatted as ext3, using opensuse 11.0 with KDE.
View 3 Replies
View Related
Jan 3, 2011
I've set up my parents' machine running KDE 4.5 and want them to use the Gwenview import function from the Device Manager popup when transferring image files off photo CDs or other inserted media, since it's the easiest method for them to comprehend. All the files on their photo discs are r-xr-xr-x by default so they're unable to rotate or modify the images once copied to their hard disk. I want to set one specific images folder on their system to automatically force any files placed there to be rw-r--r-- (and rw-rw-r-- for another shared images directory elsewhere). It seems that umask won't work since that can only take permissions away and not add them, and I'd rather avoid getting into messy ACL configuration. Is there a way to achieve this either generically or some hidden config in Gwenview itself? I use KRename myself for such tasks but this is way too complex for my parents to understand so I need something that works without them having to do anything.
View 9 Replies
View Related
Aug 13, 2011
I have a build-in card-reader in my notebook. When I insert a sd-card the card is mounted but as soon as I start copying the files to the harddrive, the sd-card will unmount and than mount again. Every time I start copying I have the unmount followed by a new mount. I tried with different sd-cards and I have the same problem. Card reader works fine on windows. But now I don't have windows anymore on this notebook so I need to use the card-reader on opensuse.
View 9 Replies
View Related
Sep 21, 2011
I was trying to install openSUSE11.4 using the Live CD. But when it started copying the root filesystem, it hung on 15% and waited forever. The CD stopped spinning too.
View 1 Replies
View Related
Jul 20, 2011
I have noticed that the files and folders search in Unity, only shows up those files which have been amended (or possibly just opened) since the install.
i was wondering if there was a way i could have the search index (or something vaguely equivalent) all the files on my machine. This is especially important given that i reinstall the OS every six months on a new distribution cycle, copying all my old files across.
Without being able to see my old files the search is pretty much reduced to a recent history search.
View 3 Replies
View Related
Oct 11, 2010
I found this command that works great finding and replacing a simple string to another in files located in that folder and all sub-folders.
Code: find . -name '*.php' | xargs perl -pi -e 's/OldText/NewText/g'
The problem I have is that I need to replace a more complex string, like this: Old string: /mnt/stor6-wc2-dfw1/627896/982574/ New string: /mnt/stor8-wc2-dfw1/369587/302589/ There I don't know how to do it... since the / is what separates the old from the new strings, and the strings that I want to replace have / in it. Also, I would like to know how to specify under what folder replace the files, for example, I want that it search/replaces all files under /var/www/mysite/htdocs folder.
View 1 Replies
View Related
